Add support for perl 5.20.1 and 5.21.4

[perl/modules/re-engine-Hooks.git] / src / 5021004 / regexec.c

/*    regexec.c
 */

/*
 *  One Ring to rule them all, One Ring to find them
 &
 *     [p.v of _The Lord of the Rings_, opening poem]
 *     [p.50 of _The Lord of the Rings_, I/iii: "The Shadow of the Past"]
 *     [p.254 of _The Lord of the Rings_, II/ii: "The Council of Elrond"]
 */

/* This file contains functions for executing a regular expression.  See
 * also regcomp.c which funnily enough, contains functions for compiling
 * a regular expression.
 *
 * This file is also copied at build time to ext/re/re_exec.c, where
 * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
 * This causes the main functions to be compiled under new names and with
 * debugging support added, which makes "use re 'debug'" work.
 */

/* NOTE: this is derived from Henry Spencer's regexp code, and should not
 * confused with the original package (see point 3 below).  Thanks, Henry!
 */

/* Additional note: this code is very heavily munged from Henry's version
 * in places.  In some spots I've traded clarity for efficiency, so don't
 * blame Henry for some of the lack of readability.
 */

/* The names of the functions have been changed from regcomp and
 * regexec to  pregcomp and pregexec in order to avoid conflicts
 * with the POSIX routines of the same names.
*/

#ifdef PERL_EXT_RE_BUILD
#include "re_top.h"
#endif

/*
 * pregcomp and pregexec -- regsub and regerror are not used in perl
 *
 * Copyright (c) 1986 by University of Toronto.
 * Written by Henry Spencer.  Not derived from licensed software.
 *
 * Permission is granted to anyone to use this software for any
 * purpose on any computer system, and to redistribute it freely,
 * subject to the following restrictions:
 *
 * 1. The author is not responsible for the consequences of use of
 *  this software, no matter how awful, even if they arise
 *  from defects in it.
 *
 * 2. The origin of this software must not be misrepresented, either
 *  by explicit claim or by omission.
 *
 * 3. Altered versions must be plainly marked as such, and must not
 *  be misrepresented as being the original software.
 *
 ****    Alterations to Henry's code are...
 ****
 ****    Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 ****    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 ****    by Larry Wall and others
 ****
 ****    You may distribute under the terms of either the GNU General Public
 ****    License or the Artistic License, as specified in the README file.
 *
 * Beware that some of this code is subtly aware of the way operator
 * precedence is structured in regular expressions.  Serious changes in
 * regular-expression syntax might require a total rethink.
 */
#include "EXTERN.h"
#define PERL_IN_REGEXEC_C
#include "perl.h"
#include "re_defs.h"

#ifdef PERL_IN_XSUB_RE
#  include "re_comp.h"
#else
#  include "regcomp.h"
#endif

#include "inline_invlist.c"
#include "unicode_constants.h"

#ifdef DEBUGGING
/* At least one required character in the target string is expressible only in
 * UTF-8. */
static const char* const non_utf8_target_but_utf8_required
    = "Can't match, because target string needs to be in UTF-8\n";
#endif

#define NON_UTF8_TARGET_BUT_UTF8_REQUIRED(target) STMT_START { \
 DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%s", non_utf8_target_but_utf8_required));\
 goto target; \
} STMT_END

#define HAS_NONLATIN1_FOLD_CLOSURE(i) _HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(i)

#ifndef STATIC
#define STATIC static
#endif

/* Valid only for non-utf8 strings: avoids the reginclass
 * call if there are no complications: i.e., if everything matchable is
 * straight forward in the bitmap */
#define REGINCLASS(prog,p,c)  (ANYOF_FLAGS(p) ? reginclass(prog,p,c,c+1,0)   \
           : ANYOF_BITMAP_TEST(p,*(c)))

/*
 * Forwards.
 */

#define CHR_SVLEN(sv) (utf8_target ? sv_len_utf8(sv) : SvCUR(sv))
#define CHR_DIST(a,b) (reginfo->is_utf8_target ? utf8_distance(a,b) : a - b)

#define HOPc(pos,off) \
  (char *)(reginfo->is_utf8_target \
   ? reghop3((U8*)pos, off, \
     (U8*)(off >= 0 ? reginfo->strend : reginfo->strbeg)) \
   : (U8*)(pos + off))

#define HOPBACKc(pos, off) \
  (char*)(reginfo->is_utf8_target \
   ? reghopmaybe3((U8*)pos, -off, (U8*)(reginfo->strbeg)) \
   : (pos - off >= reginfo->strbeg) \
    ? (U8*)pos - off  \
    : NULL)

#define HOP3(pos,off,lim) (reginfo->is_utf8_target  ? reghop3((U8*)(pos), off, (U8*)(lim)) : (U8*)(pos + off))
#define HOP3c(pos,off,lim) ((char*)HOP3(pos,off,lim))

/* lim must be +ve. Returns NULL on overshoot */
#define HOPMAYBE3(pos,off,lim) \
  (reginfo->is_utf8_target                        \
   ? reghopmaybe3((U8*)pos, off, (U8*)(lim))   \
   : ((U8*)pos + off <= lim)                   \
    ? (U8*)pos + off                        \
    : NULL)

/* like HOP3, but limits the result to <= lim even for the non-utf8 case.
 * off must be >=0; args should be vars rather than expressions */
#define HOP3lim(pos,off,lim) (reginfo->is_utf8_target \
 ? reghop3((U8*)(pos), off, (U8*)(lim)) \
 : (U8*)((pos + off) > lim ? lim : (pos + off)))

#define HOP4(pos,off,llim, rlim) (reginfo->is_utf8_target \
 ? reghop4((U8*)(pos), off, (U8*)(llim), (U8*)(rlim)) \
 : (U8*)(pos + off))
#define HOP4c(pos,off,llim, rlim) ((char*)HOP4(pos,off,llim, rlim))

#define NEXTCHR_EOS -10 /* nextchr has fallen off the end */
#define NEXTCHR_IS_EOS (nextchr < 0)

#define SET_nextchr \
 nextchr = ((locinput < reginfo->strend) ? UCHARAT(locinput) : NEXTCHR_EOS)

#define SET_locinput(p) \
 locinput = (p);  \
 SET_nextchr


#define LOAD_UTF8_CHARCLASS(swash_ptr, property_name, invlist) STMT_START {   \
  if (!swash_ptr) {                                                     \
   U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;                       \
   swash_ptr = _core_swash_init("utf8", property_name, &PL_sv_undef, \
          1, 0, invlist, &flags);              \
   assert(swash_ptr);                                                \
  }                                                                     \
 } STMT_END

/* If in debug mode, we test that a known character properly matches */
#ifdef DEBUGGING
#   define LOAD_UTF8_CHARCLASS_DEBUG_TEST(swash_ptr,                          \
          property_name,                      \
          invlist,                            \
          utf8_char_in_property)              \
  LOAD_UTF8_CHARCLASS(swash_ptr, property_name, invlist);               \
  assert(swash_fetch(swash_ptr, (U8 *) utf8_char_in_property, TRUE));
#else
#   define LOAD_UTF8_CHARCLASS_DEBUG_TEST(swash_ptr,                          \
          property_name,                      \
          invlist,                            \
          utf8_char_in_property)              \
  LOAD_UTF8_CHARCLASS(swash_ptr, property_name, invlist)
#endif

#define LOAD_UTF8_CHARCLASS_ALNUM() LOAD_UTF8_CHARCLASS_DEBUG_TEST(           \
          PL_utf8_swash_ptrs[_CC_WORDCHAR],     \
          "",                                   \
          PL_XPosix_ptrs[_CC_WORDCHAR],         \
          LATIN_CAPITAL_LETTER_SHARP_S_UTF8);

#define LOAD_UTF8_CHARCLASS_GCB()  /* Grapheme cluster boundaries */          \
 STMT_START {                                                              \
  LOAD_UTF8_CHARCLASS_DEBUG_TEST(PL_utf8_X_regular_begin,               \
         "_X_regular_begin",                    \
         NULL,                                  \
         LATIN_CAPITAL_LETTER_SHARP_S_UTF8);    \
  LOAD_UTF8_CHARCLASS_DEBUG_TEST(PL_utf8_X_extend,                      \
         "_X_extend",                           \
         NULL,                                  \
         COMBINING_GRAVE_ACCENT_UTF8);          \
 } STMT_END

#define PLACEHOLDER /* Something for the preprocessor to grab onto */
/* TODO: Combine JUMPABLE and HAS_TEXT to cache OP(rn) */

/* for use after a quantifier and before an EXACT-like node -- japhy */
/* it would be nice to rework regcomp.sym to generate this stuff. sigh
 *
 * NOTE that *nothing* that affects backtracking should be in here, specifically
 * VERBS must NOT be included. JUMPABLE is used to determine  if we can ignore a
 * node that is in between two EXACT like nodes when ascertaining what the required
 * "follow" character is. This should probably be moved to regex compile time
 * although it may be done at run time beause of the REF possibility - more
 * investigation required. -- demerphq
*/
#define JUMPABLE(rn) (                                                             \
 OP(rn) == OPEN ||                                                              \
 (OP(rn) == CLOSE && (!cur_eval || cur_eval->u.eval.close_paren != ARG(rn))) || \
 OP(rn) == EVAL ||                                                              \
 OP(rn) == SUSPEND || OP(rn) == IFMATCH ||                                      \
 OP(rn) == PLUS || OP(rn) == MINMOD ||                                          \
 OP(rn) == KEEPS ||                                                             \
 (PL_regkind[OP(rn)] == CURLY && ARG1(rn) > 0)                                  \
)
#define IS_EXACT(rn) (PL_regkind[OP(rn)] == EXACT)

#define HAS_TEXT(rn) ( IS_EXACT(rn) || PL_regkind[OP(rn)] == REF )

#if 0
/* Currently these are only used when PL_regkind[OP(rn)] == EXACT so
   we don't need this definition. */
#define IS_TEXT(rn)   ( OP(rn)==EXACT   || OP(rn)==REF   || OP(rn)==NREF   )
#define IS_TEXTF(rn)  ( OP(rn)==EXACTFU || OP(rn)==EXACTFU_SS || OP(rn)==EXACTFA || OP(rn)==EXACTFA_NO_TRIE || OP(rn)==EXACTF || OP(rn)==REFF  || OP(rn)==NREFF )
#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL || OP(rn)==REFFL || OP(rn)==NREFFL )

#else
/* ... so we use this as its faster. */
#define IS_TEXT(rn)   ( OP(rn)==EXACT   )
#define IS_TEXTFU(rn)  ( OP(rn)==EXACTFU || OP(rn)==EXACTFU_SS || OP(rn) == EXACTFA || OP(rn) == EXACTFA_NO_TRIE)
#define IS_TEXTF(rn)  ( OP(rn)==EXACTF  )
#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL )

#endif

/*
  Search for mandatory following text node; for lookahead, the text must
  follow but for lookbehind (rn->flags != 0) we skip to the next step.
*/
#define FIND_NEXT_IMPT(rn) STMT_START {                                   \
 while (JUMPABLE(rn)) { \
  const OPCODE type = OP(rn); \
  if (type == SUSPEND || PL_regkind[type] == CURLY) \
   rn = NEXTOPER(NEXTOPER(rn)); \
  else if (type == PLUS) \
   rn = NEXTOPER(rn); \
  else if (type == IFMATCH) \
   rn = (rn->flags == 0) ? NEXTOPER(NEXTOPER(rn)) : rn + ARG(rn); \
  else rn += NEXT_OFF(rn); \
 } \
} STMT_END

/* These constants are for finding GCB=LV and GCB=LVT in the CLUMP regnode.
 * These are for the pre-composed Hangul syllables, which are all in a
 * contiguous block and arranged there in such a way so as to facilitate
 * alorithmic determination of their characteristics.  As such, they don't need
 * a swash, but can be determined by simple arithmetic.  Almost all are
 * GCB=LVT, but every 28th one is a GCB=LV */
#define SBASE 0xAC00    /* Start of block */
#define SCount 11172    /* Length of block */
#define TCount 28

#define SLAB_FIRST(s) (&(s)->states[0])
#define SLAB_LAST(s)  (&(s)->states[PERL_REGMATCH_SLAB_SLOTS-1])

static void S_setup_eval_state(pTHX_ regmatch_info *const reginfo);
static void S_cleanup_regmatch_info_aux(pTHX_ void *arg);
static regmatch_state * S_push_slab(pTHX);

#define REGCP_PAREN_ELEMS 3
#define REGCP_OTHER_ELEMS 3
#define REGCP_FRAME_ELEMS 1
/* REGCP_FRAME_ELEMS are not part of the REGCP_OTHER_ELEMS and
 * are needed for the regexp context stack bookkeeping. */

STATIC CHECKPOINT
S_regcppush(pTHX_ const regexp *rex, I32 parenfloor, U32 maxopenparen)
{
 const int retval = PL_savestack_ix;
 const int paren_elems_to_push =
    (maxopenparen - parenfloor) * REGCP_PAREN_ELEMS;
 const UV total_elems = paren_elems_to_push + REGCP_OTHER_ELEMS;
 const UV elems_shifted = total_elems << SAVE_TIGHT_SHIFT;
 I32 p;
 GET_RE_DEBUG_FLAGS_DECL;

 PERL_ARGS_ASSERT_REGCPPUSH;

 if (paren_elems_to_push < 0)
  Perl_croak(aTHX_ "panic: paren_elems_to_push, %i < 0, maxopenparen: %i parenfloor: %i REGCP_PAREN_ELEMS: %u",
    (int)paren_elems_to_push, (int)maxopenparen,
    (int)parenfloor, (unsigned)REGCP_PAREN_ELEMS);

 if ((elems_shifted >> SAVE_TIGHT_SHIFT) != total_elems)
  Perl_croak(aTHX_ "panic: paren_elems_to_push offset %"UVuf
    " out of range (%lu-%ld)",
    total_elems,
    (unsigned long)maxopenparen,
    (long)parenfloor);

 SSGROW(total_elems + REGCP_FRAME_ELEMS);

 DEBUG_BUFFERS_r(
  if ((int)maxopenparen > (int)parenfloor)
   PerlIO_printf(Perl_debug_log,
    "rex=0x%"UVxf" offs=0x%"UVxf": saving capture indices:\n",
    PTR2UV(rex),
    PTR2UV(rex->offs)
   );
 );
 for (p = parenfloor+1; p <= (I32)maxopenparen;  p++) {
/* REGCP_PARENS_ELEMS are pushed per pairs of parentheses. */
  SSPUSHIV(rex->offs[p].end);
  SSPUSHIV(rex->offs[p].start);
  SSPUSHINT(rex->offs[p].start_tmp);
  DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
   "    \\%"UVuf": %"IVdf"(%"IVdf")..%"IVdf"\n",
   (UV)p,
   (IV)rex->offs[p].start,
   (IV)rex->offs[p].start_tmp,
   (IV)rex->offs[p].end
  ));
 }
/* REGCP_OTHER_ELEMS are pushed in any case, parentheses or no. */
 SSPUSHINT(maxopenparen);
 SSPUSHINT(rex->lastparen);
 SSPUSHINT(rex->lastcloseparen);
 SSPUSHUV(SAVEt_REGCONTEXT | elems_shifted); /* Magic cookie. */

 return retval;
}

/* These are needed since we do not localize EVAL nodes: */
#define REGCP_SET(cp)                                           \
 DEBUG_STATE_r(                                              \
   PerlIO_printf(Perl_debug_log,          \
    "  Setting an EVAL scope, savestack=%"IVdf"\n", \
    (IV)PL_savestack_ix));                          \
 cp = PL_savestack_ix

#define REGCP_UNWIND(cp)                                        \
 DEBUG_STATE_r(                                              \
  if (cp != PL_savestack_ix)                   \
    PerlIO_printf(Perl_debug_log,          \
    "  Clearing an EVAL scope, savestack=%"IVdf"..%"IVdf"\n", \
    (IV)(cp), (IV)PL_savestack_ix));                \
 regcpblow(cp)

#define UNWIND_PAREN(lp, lcp)               \
 for (n = rex->lastparen; n > lp; n--)   \
  rex->offs[n].end = -1;              \
 rex->lastparen = n;                     \
 rex->lastcloseparen = lcp;


STATIC void
S_regcppop(pTHX_ regexp *rex, U32 *maxopenparen_p)
{
 UV i;
 U32 paren;
 GET_RE_DEBUG_FLAGS_DECL;

 PERL_ARGS_ASSERT_REGCPPOP;

 /* Pop REGCP_OTHER_ELEMS before the parentheses loop starts. */
 i = SSPOPUV;
 assert((i & SAVE_MASK) == SAVEt_REGCONTEXT); /* Check that the magic cookie is there. */
 i >>= SAVE_TIGHT_SHIFT; /* Parentheses elements to pop. */
 rex->lastcloseparen = SSPOPINT;
 rex->lastparen = SSPOPINT;
 *maxopenparen_p = SSPOPINT;

 i -= REGCP_OTHER_ELEMS;
 /* Now restore the parentheses context. */
 DEBUG_BUFFERS_r(
  if (i || rex->lastparen + 1 <= rex->nparens)
   PerlIO_printf(Perl_debug_log,
    "rex=0x%"UVxf" offs=0x%"UVxf": restoring capture indices to:\n",
    PTR2UV(rex),
    PTR2UV(rex->offs)
   );
 );
 paren = *maxopenparen_p;
 for ( ; i > 0; i -= REGCP_PAREN_ELEMS) {
  SSize_t tmps;
  rex->offs[paren].start_tmp = SSPOPINT;
  rex->offs[paren].start = SSPOPIV;
  tmps = SSPOPIV;
  if (paren <= rex->lastparen)
   rex->offs[paren].end = tmps;
  DEBUG_BUFFERS_r( PerlIO_printf(Perl_debug_log,
   "    \\%"UVuf": %"IVdf"(%"IVdf")..%"IVdf"%s\n",
   (UV)paren,
   (IV)rex->offs[paren].start,
   (IV)rex->offs[paren].start_tmp,
   (IV)rex->offs[paren].end,
   (paren > rex->lastparen ? "(skipped)" : ""));
  );
  paren--;
 }
#if 1
 /* It would seem that the similar code in regtry()
 * already takes care of this, and in fact it is in
 * a better location to since this code can #if 0-ed out
 * but the code in regtry() is needed or otherwise tests
 * requiring null fields (pat.t#187 and split.t#{13,14}
 * (as of patchlevel 7877)  will fail.  Then again,
 * this code seems to be necessary or otherwise
 * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
 * --jhi updated by dapm */
 for (i = rex->lastparen + 1; i <= rex->nparens; i++) {
  if (i > *maxopenparen_p)
   rex->offs[i].start = -1;
  rex->offs[i].end = -1;
  DEBUG_BUFFERS_r( PerlIO_printf(Perl_debug_log,
   "    \\%"UVuf": %s   ..-1 undeffing\n",
   (UV)i,
   (i > *maxopenparen_p) ? "-1" : "  "
  ));
 }
#endif
}

/* restore the parens and associated vars at savestack position ix,
 * but without popping the stack */

STATIC void
S_regcp_restore(pTHX_ regexp *rex, I32 ix, U32 *maxopenparen_p)
{
 I32 tmpix = PL_savestack_ix;
 PL_savestack_ix = ix;
 regcppop(rex, maxopenparen_p);
 PL_savestack_ix = tmpix;
}

#define regcpblow(cp) LEAVE_SCOPE(cp) /* Ignores regcppush()ed data. */

STATIC bool
S_isFOO_lc(pTHX_ const U8 classnum, const U8 character)
{
 /* Returns a boolean as to whether or not 'character' is a member of the
 * Posix character class given by 'classnum' that should be equivalent to a
 * value in the typedef '_char_class_number'.
 *
 * Ideally this could be replaced by a just an array of function pointers
 * to the C library functions that implement the macros this calls.
 * However, to compile, the precise function signatures are required, and
 * these may vary from platform to to platform.  To avoid having to figure
 * out what those all are on each platform, I (khw) am using this method,
 * which adds an extra layer of function call overhead (unless the C
 * optimizer strips it away).  But we don't particularly care about
 * performance with locales anyway. */

 switch ((_char_class_number) classnum) {
  case _CC_ENUM_ALPHANUMERIC: return isALPHANUMERIC_LC(character);
  case _CC_ENUM_ALPHA:     return isALPHA_LC(character);
  case _CC_ENUM_ASCII:     return isASCII_LC(character);
  case _CC_ENUM_BLANK:     return isBLANK_LC(character);
  case _CC_ENUM_CASED:     return isLOWER_LC(character)
          || isUPPER_LC(character);
  case _CC_ENUM_CNTRL:     return isCNTRL_LC(character);
  case _CC_ENUM_DIGIT:     return isDIGIT_LC(character);
  case _CC_ENUM_GRAPH:     return isGRAPH_LC(character);
  case _CC_ENUM_LOWER:     return isLOWER_LC(character);
  case _CC_ENUM_PRINT:     return isPRINT_LC(character);
  case _CC_ENUM_PSXSPC:    return isPSXSPC_LC(character);
  case _CC_ENUM_PUNCT:     return isPUNCT_LC(character);
  case _CC_ENUM_SPACE:     return isSPACE_LC(character);
  case _CC_ENUM_UPPER:     return isUPPER_LC(character);
  case _CC_ENUM_WORDCHAR:  return isWORDCHAR_LC(character);
  case _CC_ENUM_XDIGIT:    return isXDIGIT_LC(character);
  default:    /* VERTSPACE should never occur in locales */
   Perl_croak(aTHX_ "panic: isFOO_lc() has an unexpected character class '%d'", classnum);
 }

 assert(0); /* NOTREACHED */
 return FALSE;
}

STATIC bool
S_isFOO_utf8_lc(pTHX_ const U8 classnum, const U8* character)
{
 /* Returns a boolean as to whether or not the (well-formed) UTF-8-encoded
 * 'character' is a member of the Posix character class given by 'classnum'
 * that should be equivalent to a value in the typedef
 * '_char_class_number'.
 *
 * This just calls isFOO_lc on the code point for the character if it is in
 * the range 0-255.  Outside that range, all characters avoid Unicode
 * rules, ignoring any locale.  So use the Unicode function if this class
 * requires a swash, and use the Unicode macro otherwise. */

 PERL_ARGS_ASSERT_ISFOO_UTF8_LC;

 if (UTF8_IS_INVARIANT(*character)) {
  return isFOO_lc(classnum, *character);
 }
 else if (UTF8_IS_DOWNGRADEABLE_START(*character)) {
  return isFOO_lc(classnum,
      TWO_BYTE_UTF8_TO_NATIVE(*character, *(character + 1)));
 }

 if (classnum < _FIRST_NON_SWASH_CC) {

  /* Initialize the swash unless done already */
  if (! PL_utf8_swash_ptrs[classnum]) {
   U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
   PL_utf8_swash_ptrs[classnum] =
     _core_swash_init("utf8",
         "",
         &PL_sv_undef, 1, 0,
         PL_XPosix_ptrs[classnum], &flags);
  }

  return cBOOL(swash_fetch(PL_utf8_swash_ptrs[classnum], (U8 *)
        character,
        TRUE /* is UTF */ ));
 }

 switch ((_char_class_number) classnum) {
  case _CC_ENUM_SPACE:
  case _CC_ENUM_PSXSPC:    return is_XPERLSPACE_high(character);

  case _CC_ENUM_BLANK:     return is_HORIZWS_high(character);
  case _CC_ENUM_XDIGIT:    return is_XDIGIT_high(character);
  case _CC_ENUM_VERTSPACE: return is_VERTWS_high(character);
  default:                 break;
 }

 return FALSE; /* Things like CNTRL are always below 256 */
}

/*
 * pregexec and friends
 */

#ifndef PERL_IN_XSUB_RE
/*
 - pregexec - match a regexp against a string
 */
I32
Perl_pregexec(pTHX_ REGEXP * const prog, char* stringarg, char *strend,
  char *strbeg, SSize_t minend, SV *screamer, U32 nosave)
/* stringarg: the point in the string at which to begin matching */
/* strend:    pointer to null at end of string */
/* strbeg:    real beginning of string */
/* minend:    end of match must be >= minend bytes after stringarg. */
/* screamer:  SV being matched: only used for utf8 flag, pos() etc; string
 *            itself is accessed via the pointers above */
/* nosave:    For optimizations. */
{
 PERL_ARGS_ASSERT_PREGEXEC;

 return
  regexec_flags(prog, stringarg, strend, strbeg, minend, screamer, NULL,
     nosave ? 0 : REXEC_COPY_STR);
}
#endif



/* re_intuit_start():
 *
 * Based on some optimiser hints, try to find the earliest position in the
 * string where the regex could match.
 *
 *   rx:     the regex to match against
 *   sv:     the SV being matched: only used for utf8 flag; the string
 *           itself is accessed via the pointers below. Note that on
 *           something like an overloaded SV, SvPOK(sv) may be false
 *           and the string pointers may point to something unrelated to
 *           the SV itself.
 *   strbeg: real beginning of string
 *   strpos: the point in the string at which to begin matching
 *   strend: pointer to the byte following the last char of the string
 *   flags   currently unused; set to 0
 *   data:   currently unused; set to NULL
 *
 * The basic idea of re_intuit_start() is to use some known information
 * about the pattern, namely:
 *
 *   a) the longest known anchored substring (i.e. one that's at a
 *      constant offset from the beginning of the pattern; but not
 *      necessarily at a fixed offset from the beginning of the
 *      string);
 *   b) the longest floating substring (i.e. one that's not at a constant
 *      offset from the beginning of the pattern);
 *   c) Whether the pattern is anchored to the string; either
 *      an absolute anchor: /^../, or anchored to \n: /^.../m,
 *      or anchored to pos(): /\G/;
 *   d) A start class: a real or synthetic character class which
 *      represents which characters are legal at the start of the pattern;
 *
 * to either quickly reject the match, or to find the earliest position
 * within the string at which the pattern might match, thus avoiding
 * running the full NFA engine at those earlier locations, only to
 * eventually fail and retry further along.
 *
 * Returns NULL if the pattern can't match, or returns the address within
 * the string which is the earliest place the match could occur.
 *
 * The longest of the anchored and floating substrings is called 'check'
 * and is checked first. The other is called 'other' and is checked
 * second. The 'other' substring may not be present.  For example,
 *
 *    /(abc|xyz)ABC\d{0,3}DEFG/
 *
 * will have
 *
 *   check substr (float)    = "DEFG", offset 6..9 chars
 *   other substr (anchored) = "ABC",  offset 3..3 chars
 *   stclass = [ax]
 *
 * Be aware that during the course of this function, sometimes 'anchored'
 * refers to a substring being anchored relative to the start of the
 * pattern, and sometimes to the pattern itself being anchored relative to
 * the string. For example:
 *
 *   /\dabc/:   "abc" is anchored to the pattern;
 *   /^\dabc/:  "abc" is anchored to the pattern and the string;
 *   /\d+abc/:  "abc" is anchored to neither the pattern nor the string;
 *   /^\d+abc/: "abc" is anchored to neither the pattern nor the string,
 *                    but the pattern is anchored to the string.
 */

char *
Perl_re_intuit_start(pTHX_
     REGEXP * const rx,
     SV *sv,
     const char * const strbeg,
     char *strpos,
     char *strend,
     const U32 flags,
     re_scream_pos_data *data)
{
 struct regexp *const prog = ReANY(rx);
 SSize_t start_shift = prog->check_offset_min;
 /* Should be nonnegative! */
 SSize_t end_shift   = 0;
 /* current lowest pos in string where the regex can start matching */
 char *rx_origin = strpos;
 SV *check;
 const bool utf8_target = (sv && SvUTF8(sv)) ? 1 : 0; /* if no sv we have to assume bytes */
 U8   other_ix = 1 - prog->substrs->check_ix;
 bool ml_anch = 0;
 char *other_last = strpos;/* latest pos 'other' substr already checked to */
 char *check_at = NULL;  /* check substr found at this pos */
 const I32 multiline = prog->extflags & RXf_PMf_MULTILINE;
 RXi_GET_DECL(prog,progi);
 regmatch_info reginfo_buf;  /* create some info to pass to find_byclass */
 regmatch_info *const reginfo = &reginfo_buf;
 GET_RE_DEBUG_FLAGS_DECL;

 PERL_ARGS_ASSERT_RE_INTUIT_START;
 PERL_UNUSED_ARG(flags);
 PERL_UNUSED_ARG(data);

 DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
    "Intuit: trying to determine minimum start position...\n"));

 /* for now, assume that all substr offsets are positive. If at some point
 * in the future someone wants to do clever things with look-behind and
 * -ve offsets, they'll need to fix up any code in this function
 * which uses these offsets. See the thread beginning
 * <20140113145929.GF27210@iabyn.com>
 */
 assert(prog->substrs->data[0].min_offset >= 0);
 assert(prog->substrs->data[0].max_offset >= 0);
 assert(prog->substrs->data[1].min_offset >= 0);
 assert(prog->substrs->data[1].max_offset >= 0);
 assert(prog->substrs->data[2].min_offset >= 0);
 assert(prog->substrs->data[2].max_offset >= 0);

 /* for now, assume that if both present, that the floating substring
 * doesn't start before the anchored substring.
 * If you break this assumption (e.g. doing better optimisations
 * with lookahead/behind), then you'll need to audit the code in this
 * function carefully first
 */
 assert(
   ! (  (prog->anchored_utf8 || prog->anchored_substr)
   && (prog->float_utf8    || prog->float_substr))
  || (prog->float_min_offset >= prog->anchored_offset));

 /* byte rather than char calculation for efficiency. It fails
 * to quickly reject some cases that can't match, but will reject
 * them later after doing full char arithmetic */
 if (prog->minlen > strend - strpos) {
  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
       "  String too short...\n"));
  goto fail;
 }

 reginfo->is_utf8_target = cBOOL(utf8_target);
 reginfo->info_aux = NULL;
 reginfo->strbeg = strbeg;
 reginfo->strend = strend;
 reginfo->is_utf8_pat = cBOOL(RX_UTF8(rx));
 reginfo->intuit = 1;
 /* not actually used within intuit, but zero for safety anyway */
 reginfo->poscache_maxiter = 0;

 if (utf8_target) {
  if (!prog->check_utf8 && prog->check_substr)
   to_utf8_substr(prog);
  check = prog->check_utf8;
 } else {
  if (!prog->check_substr && prog->check_utf8) {
   if (! to_byte_substr(prog)) {
    NON_UTF8_TARGET_BUT_UTF8_REQUIRED(fail);
   }
  }
  check = prog->check_substr;
 }

 /* dump the various substring data */
 DEBUG_OPTIMISE_MORE_r({
  int i;
  for (i=0; i<=2; i++) {
   SV *sv = (utf8_target ? prog->substrs->data[i].utf8_substr
        : prog->substrs->data[i].substr);
   if (!sv)
    continue;

   PerlIO_printf(Perl_debug_log,
    "  substrs[%d]: min=%"IVdf" max=%"IVdf" end shift=%"IVdf
    " useful=%"IVdf" utf8=%d [%s]\n",
    i,
    (IV)prog->substrs->data[i].min_offset,
    (IV)prog->substrs->data[i].max_offset,
    (IV)prog->substrs->data[i].end_shift,
    BmUSEFUL(sv),
    utf8_target ? 1 : 0,
    SvPEEK(sv));
  }
 });

 if (prog->intflags & PREGf_ANCH) { /* Match at \G, beg-of-str or after \n */

  /* ml_anch: check after \n?
  *
  * A note about IMPLICIT: on an un-anchored pattern beginning
  * with /.*.../, these flags will have been added by the
  * compiler:
  *   /.*abc/, /.*abc/m:  PREGf_IMPLICIT | PREGf_ANCH_MBOL
  *   /.*abc/s:           PREGf_IMPLICIT | PREGf_ANCH_SBOL
  */
  ml_anch =      (prog->intflags & PREGf_ANCH_MBOL)
    && !(prog->intflags & PREGf_IMPLICIT);

  if (!ml_anch && !(prog->intflags & PREGf_IMPLICIT)) {
   /* we are only allowed to match at BOS or \G */

   /* trivially reject if there's a BOS anchor and we're not at BOS.
   *
   * Note that we don't try to do a similar quick reject for
   * \G, since generally the caller will have calculated strpos
   * based on pos() and gofs, so the string is already correctly
   * anchored by definition; and handling the exceptions would
   * be too fiddly (e.g. REXEC_IGNOREPOS).
   */
   if (   strpos != strbeg
    && (prog->intflags & PREGf_ANCH_SBOL))
   {
    DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
        "  Not at start...\n"));
    goto fail;
   }

   /* in the presence of an anchor, the anchored (relative to the
   * start of the regex) substr must also be anchored relative
   * to strpos. So quickly reject if substr isn't found there.
   * This works for \G too, because the caller will already have
   * subtracted gofs from pos, and gofs is the offset from the
   * \G to the start of the regex. For example, in /.abc\Gdef/,
   * where substr="abcdef", pos()=3, gofs=4, offset_min=1:
   * caller will have set strpos=pos()-4; we look for the substr
   * at position pos()-4+1, which lines up with the "a" */

   if (prog->check_offset_min == prog->check_offset_max
    && !(prog->intflags & PREGf_CANY_SEEN))
   {
    /* Substring at constant offset from beg-of-str... */
    SSize_t slen = SvCUR(check);
    char *s = HOP3c(strpos, prog->check_offset_min, strend);

    DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
     "  Looking for check substr at fixed offset %"IVdf"...\n",
     (IV)prog->check_offset_min));

    if (SvTAIL(check)) {
     /* In this case, the regex is anchored at the end too.
     * Unless it's a multiline match, the lengths must match
     * exactly, give or take a \n.  NB: slen >= 1 since
     * the last char of check is \n */
     if (!multiline
      && (   strend - s > slen
       || strend - s < slen - 1
       || (strend - s == slen && strend[-1] != '\n')))
     {
      DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
           "  String too long...\n"));
      goto fail_finish;
     }
     /* Now should match s[0..slen-2] */
     slen--;
    }
    if (slen && (*SvPVX_const(check) != *s
     || (slen > 1 && memNE(SvPVX_const(check), s, slen))))
    {
     DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
         "  String not equal...\n"));
     goto fail_finish;
    }

    check_at = s;
    goto success_at_start;
   }
  }
 }

 end_shift = prog->check_end_shift;

#ifdef DEBUGGING /* 7/99: reports of failure (with the older version) */
 if (end_shift < 0)
  Perl_croak(aTHX_ "panic: end_shift: %"IVdf" pattern:\n%s\n ",
    (IV)end_shift, RX_PRECOMP(prog));
#endif

  restart:

 /* This is the (re)entry point of the main loop in this function.
 * The goal of this loop is to:
 * 1) find the "check" substring in the region rx_origin..strend
 *    (adjusted by start_shift / end_shift). If not found, reject
 *    immediately.
 * 2) If it exists, look for the "other" substr too if defined; for
 *    example, if the check substr maps to the anchored substr, then
 *    check the floating substr, and vice-versa. If not found, go
 *    back to (1) with rx_origin suitably incremented.
 * 3) If we find an rx_origin position that doesn't contradict
 *    either of the substrings, then check the possible additional
 *    constraints on rx_origin of /^.../m or a known start class.
 *    If these fail, then depending on which constraints fail, jump
 *    back to here, or to various other re-entry points further along
 *    that skip some of the first steps.
 * 4) If we pass all those tests, update the BmUSEFUL() count on the
 *    substring. If the start position was determined to be at the
 *    beginning of the string  - so, not rejected, but not optimised,
 *    since we have to run regmatch from position 0 - decrement the
 *    BmUSEFUL() count. Otherwise increment it.
 */


 /* first, look for the 'check' substring */

 {
  U8* start_point;
  U8* end_point;

  DEBUG_OPTIMISE_MORE_r({
   PerlIO_printf(Perl_debug_log,
    "  At restart: rx_origin=%"IVdf" Check offset min: %"IVdf
    " Start shift: %"IVdf" End shift %"IVdf
    " Real end Shift: %"IVdf"\n",
    (IV)(rx_origin - strpos),
    (IV)prog->check_offset_min,
    (IV)start_shift,
    (IV)end_shift,
    (IV)prog->check_end_shift);
  });

  if (prog->intflags & PREGf_CANY_SEEN) {
   start_point= (U8*)(rx_origin + start_shift);
   end_point= (U8*)(strend - end_shift);
   if (start_point > end_point)
    goto fail_finish;
  } else {
   end_point = HOP3(strend, -end_shift, strbeg);
   start_point = HOPMAYBE3(rx_origin, start_shift, end_point);
   if (!start_point)
    goto fail_finish;
  }


  /* If the regex is absolutely anchored to either the start of the
  * string (SBOL) or to pos() (ANCH_GPOS), then
  * check_offset_max represents an upper bound on the string where
  * the substr could start. For the ANCH_GPOS case, we assume that
  * the caller of intuit will have already set strpos to
  * pos()-gofs, so in this case strpos + offset_max will still be
  * an upper bound on the substr.
  */
  if (!ml_anch
   && prog->intflags & PREGf_ANCH
   && prog->check_offset_max != SSize_t_MAX)
  {
   SSize_t len = SvCUR(check) - !!SvTAIL(check);
   const char * const anchor =
      (prog->intflags & PREGf_ANCH_GPOS ? strpos : strbeg);

   /* do a bytes rather than chars comparison. It's conservative;
   * so it skips doing the HOP if the result can't possibly end
   * up earlier than the old value of end_point.
   */
   if ((char*)end_point - anchor > prog->check_offset_max) {
    end_point = HOP3lim((U8*)anchor,
        prog->check_offset_max,
        end_point -len)
       + len;
   }
  }

  DEBUG_OPTIMISE_MORE_r({
   PerlIO_printf(Perl_debug_log, "  fbm_instr len=%d str=<%.*s>\n",
    (int)(end_point - start_point),
    (int)(end_point - start_point) > 20 ? 20 : (int)(end_point - start_point),
    start_point);
  });

  check_at = fbm_instr( start_point, end_point,
     check, multiline ? FBMrf_MULTILINE : 0);

  /* Update the count-of-usability, remove useless subpatterns,
   unshift s.  */

  DEBUG_EXECUTE_r({
   RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
    SvPVX_const(check), RE_SV_DUMPLEN(check), 30);
   PerlIO_printf(Perl_debug_log, "  %s %s substr %s%s%s",
       (check_at ? "Found" : "Did not find"),
    (check == (utf8_target ? prog->anchored_utf8 : prog->anchored_substr)
     ? "anchored" : "floating"),
    quoted,
    RE_SV_TAIL(check),
    (check_at ? " at offset " : "...\n") );
  });

  if (!check_at)
   goto fail_finish;
  /* Finish the diagnostic message */
  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%ld...\n", (long)(check_at - strpos)) );

  /* set rx_origin to the minimum position where the regex could start
  * matching, given the constraint of the just-matched check substring.
  * But don't set it lower than previously.
  */

  if (check_at - rx_origin > prog->check_offset_max)
   rx_origin = HOP3c(check_at, -prog->check_offset_max, rx_origin);
 }


 /* now look for the 'other' substring if defined */

 if (utf8_target ? prog->substrs->data[other_ix].utf8_substr
     : prog->substrs->data[other_ix].substr)
 {
  /* Take into account the "other" substring. */
  char *last, *last1;
  char *s;
  SV* must;
  struct reg_substr_datum *other;

 do_other_substr:
  other = &prog->substrs->data[other_ix];

  /* if "other" is anchored:
  * we've previously found a floating substr starting at check_at.
  * This means that the regex origin must lie somewhere
  * between min (rx_origin): HOP3(check_at, -check_offset_max)
  * and max:                 HOP3(check_at, -check_offset_min)
  * (except that min will be >= strpos)
  * So the fixed  substr must lie somewhere between
  *  HOP3(min, anchored_offset)
  *  HOP3(max, anchored_offset) + SvCUR(substr)
  */

  /* if "other" is floating
  * Calculate last1, the absolute latest point where the
  * floating substr could start in the string, ignoring any
  * constraints from the earlier fixed match. It is calculated
  * as follows:
  *
  * strend - prog->minlen (in chars) is the absolute latest
  * position within the string where the origin of the regex
  * could appear. The latest start point for the floating
  * substr is float_min_offset(*) on from the start of the
  * regex.  last1 simply combines thee two offsets.
  *
  * (*) You might think the latest start point should be
  * float_max_offset from the regex origin, and technically
  * you'd be correct. However, consider
  *    /a\d{2,4}bcd\w/
  * Here, float min, max are 3,5 and minlen is 7.
  * This can match either
  *    /a\d\dbcd\w/
  *    /a\d\d\dbcd\w/
  *    /a\d\d\d\dbcd\w/
  * In the first case, the regex matches minlen chars; in the
  * second, minlen+1, in the third, minlen+2.
  * In the first case, the floating offset is 3 (which equals
  * float_min), in the second, 4, and in the third, 5 (which
  * equals float_max). In all cases, the floating string bcd
  * can never start more than 4 chars from the end of the
  * string, which equals minlen - float_min. As the substring
  * starts to match more than float_min from the start of the
  * regex, it makes the regex match more than minlen chars,
  * and the two cancel each other out. So we can always use
  * float_min - minlen, rather than float_max - minlen for the
  * latest position in the string.
  *
  * Note that -minlen + float_min_offset is equivalent (AFAIKT)
  * to CHR_SVLEN(must) - !!SvTAIL(must) + prog->float_end_shift
  */

  assert(prog->minlen >= other->min_offset);
  last1 = HOP3c(strend,
      other->min_offset - prog->minlen, strbeg);

  if (other_ix) {/* i.e. if (other-is-float) */
   /* last is the latest point where the floating substr could
   * start, *given* any constraints from the earlier fixed
   * match. This constraint is that the floating string starts
   * <= float_max_offset chars from the regex origin (rx_origin).
   * If this value is less than last1, use it instead.
   */
   assert(rx_origin <= last1);
   last =
    /* this condition handles the offset==infinity case, and
    * is a short-cut otherwise. Although it's comparing a
    * byte offset to a char length, it does so in a safe way,
    * since 1 char always occupies 1 or more bytes,
    * so if a string range is  (last1 - rx_origin) bytes,
    * it will be less than or equal to  (last1 - rx_origin)
    * chars; meaning it errs towards doing the accurate HOP3
    * rather than just using last1 as a short-cut */
    (last1 - rx_origin) < other->max_offset
     ? last1
     : (char*)HOP3lim(rx_origin, other->max_offset, last1);
  }
  else {
   assert(strpos + start_shift <= check_at);
   last = HOP4c(check_at, other->min_offset - start_shift,
      strbeg, strend);
  }

  s = HOP3c(rx_origin, other->min_offset, strend);
  if (s < other_last) /* These positions already checked */
   s = other_last;

  must = utf8_target ? other->utf8_substr : other->substr;
  assert(SvPOK(must));
  s = fbm_instr(
   (unsigned char*)s,
   (unsigned char*)last + SvCUR(must) - (SvTAIL(must)!=0),
   must,
   multiline ? FBMrf_MULTILINE : 0
  );
  DEBUG_EXECUTE_r({
   RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
    SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
   PerlIO_printf(Perl_debug_log, "  %s %s substr %s%s",
    s ? "Found" : "Contradicts",
    other_ix ? "floating" : "anchored",
    quoted, RE_SV_TAIL(must));
  });


  if (!s) {
   /* last1 is latest possible substr location. If we didn't
   * find it before there, we never will */
   if (last >= last1) {
    DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
          ", giving up...\n"));
    goto fail_finish;
   }

   /* try to find the check substr again at a later
   * position. Maybe next time we'll find the "other" substr
   * in range too */
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
    ", trying %s at offset %ld...\n",
    (other_ix ? "floating" : "anchored"),
    (long)(HOP3c(check_at, 1, strend) - strpos)));

   other_last = HOP3c(last, 1, strend) /* highest failure */;
   rx_origin =
    other_ix /* i.e. if other-is-float */
     ? HOP3c(rx_origin, 1, strend)
     : HOP4c(last, 1 - other->min_offset, strbeg, strend);
   goto restart;
  }
  else {
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, " at offset %ld...\n",
    (long)(s - strpos)));

   if (other_ix) { /* if (other-is-float) */
    /* other_last is set to s, not s+1, since its possible for
    * a floating substr to fail first time, then succeed
    * second time at the same floating position; e.g.:
    *     "-AB--AABZ" =~ /\wAB\d*Z/
    * The first time round, anchored and float match at
    * "-(AB)--AAB(Z)" then fail on the initial \w character
    * class. Second time round, they match at "-AB--A(AB)(Z)".
    */
    other_last = s;
   }
   else {
    rx_origin = HOP3c(s, -other->min_offset, strbeg);
    other_last = HOP3c(s, 1, strend);
   }
  }
 }
 else {
  DEBUG_OPTIMISE_MORE_r(
   PerlIO_printf(Perl_debug_log,
    "  Check-only match: offset min:%"IVdf" max:%"IVdf
    " check_at:%"IVdf" rx_origin:%"IVdf" rx_origin-check_at:%"IVdf
    " strend-strpos:%"IVdf"\n",
    (IV)prog->check_offset_min,
    (IV)prog->check_offset_max,
    (IV)(check_at-strpos),
    (IV)(rx_origin-strpos),
    (IV)(rx_origin-check_at),
    (IV)(strend-strpos)
   )
  );
 }

  postprocess_substr_matches:

 /* handle the extra constraint of /^.../m if present */

 if (ml_anch && rx_origin != strbeg && rx_origin[-1] != '\n') {
  char *s;

  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
      "  looking for /^/m anchor"));

  /* we have failed the constraint of a \n before rx_origin.
  * Find the next \n, if any, even if it's beyond the current
  * anchored and/or floating substrings. Whether we should be
  * scanning ahead for the next \n or the next substr is debatable.
  * On the one hand you'd expect rare substrings to appear less
  * often than \n's. On the other hand, searching for \n means
  * we're effectively flipping been check_substr and "\n" on each
  * iteration as the current "rarest" string candidate, which
  * means for example that we'll quickly reject the whole string if
  * hasn't got a \n, rather than trying every substr position
  * first
  */

  s = HOP3c(strend, - prog->minlen, strpos);
  if (s <= rx_origin ||
   ! ( rx_origin = (char *)memchr(rx_origin, '\n', s - rx_origin)))
  {
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
       "  Did not find /%s^%s/m...\n",
       PL_colors[0], PL_colors[1]));
   goto fail_finish;
  }

  /* earliest possible origin is 1 char after the \n.
  * (since *rx_origin == '\n', it's safe to ++ here rather than
  * HOP(rx_origin, 1)) */
  rx_origin++;

  if (prog->substrs->check_ix == 0  /* check is anchored */
   || rx_origin >= HOP3c(check_at,  - prog->check_offset_min, strpos))
  {
   /* Position contradicts check-string; either because
   * check was anchored (and thus has no wiggle room),
   * or check was float and rx_origin is above the float range */
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
    "  Found /%s^%s/m, restarting lookup for check-string at offset %ld...\n",
    PL_colors[0], PL_colors[1], (long)(rx_origin - strpos)));
   goto restart;
  }

  /* if we get here, the check substr must have been float,
  * is in range, and we may or may not have had an anchored
  * "other" substr which still contradicts */
  assert(prog->substrs->check_ix); /* check is float */

  if (utf8_target ? prog->anchored_utf8 : prog->anchored_substr) {
   /* whoops, the anchored "other" substr exists, so we still
   * contradict. On the other hand, the float "check" substr
   * didn't contradict, so just retry the anchored "other"
   * substr */
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
    "  Found /%s^%s/m at offset %ld, rescanning for anchored from offset %ld...\n",
    PL_colors[0], PL_colors[1],
    (long)(rx_origin - strpos),
    (long)(rx_origin - strpos + prog->anchored_offset)));
   goto do_other_substr;
  }

  /* success: we don't contradict the found floating substring
  * (and there's no anchored substr). */
  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
   "  Found /%s^%s/m at offset %ld...\n",
   PL_colors[0], PL_colors[1], (long)(rx_origin - strpos)));
 }
 else {
  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
   "  (multiline anchor test skipped)\n"));
 }

  success_at_start:


 /* if we have a starting character class, then test that extra constraint.
 * (trie stclasses are too expensive to use here, we are better off to
 * leave it to regmatch itself) */

 if (progi->regstclass && PL_regkind[OP(progi->regstclass)]!=TRIE) {
  const U8* const str = (U8*)STRING(progi->regstclass);

  /* XXX this value could be pre-computed */
  const int cl_l = (PL_regkind[OP(progi->regstclass)] == EXACT
     ?  (reginfo->is_utf8_pat
      ? utf8_distance(str + STR_LEN(progi->regstclass), str)
      : STR_LEN(progi->regstclass))
     : 1);
  char * endpos;
  char *s;
  /* latest pos that a matching float substr constrains rx start to */
  char *rx_max_float = NULL;

  /* if the current rx_origin is anchored, either by satisfying an
  * anchored substring constraint, or a /^.../m constraint, then we
  * can reject the current origin if the start class isn't found
  * at the current position. If we have a float-only match, then
  * rx_origin is constrained to a range; so look for the start class
  * in that range. if neither, then look for the start class in the
  * whole rest of the string */

  /* XXX DAPM it's not clear what the minlen test is for, and why
  * it's not used in the floating case. Nothing in the test suite
  * causes minlen == 0 here. See <20140313134639.GS12844@iabyn.com>.
  * Here are some old comments, which may or may not be correct:
  *
  *   minlen == 0 is possible if regstclass is \b or \B,
  *   and the fixed substr is ''$.
  *   Since minlen is already taken into account, rx_origin+1 is
  *   before strend; accidentally, minlen >= 1 guaranties no false
  *   positives at rx_origin + 1 even for \b or \B.  But (minlen? 1 :
  *   0) below assumes that regstclass does not come from lookahead...
  *   If regstclass takes bytelength more than 1: If charlength==1, OK.
  *   This leaves EXACTF-ish only, which are dealt with in
  *   find_byclass().
  */

  if (prog->anchored_substr || prog->anchored_utf8 || ml_anch)
   endpos= HOP3c(rx_origin, (prog->minlen ? cl_l : 0), strend);
  else if (prog->float_substr || prog->float_utf8) {
   rx_max_float = HOP3c(check_at, -start_shift, strbeg);
   endpos= HOP3c(rx_max_float, cl_l, strend);
  }
  else
   endpos= strend;

  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
   "  looking for class: start_shift: %"IVdf" check_at: %"IVdf
   " rx_origin: %"IVdf" endpos: %"IVdf"\n",
   (IV)start_shift, (IV)(check_at - strbeg),
   (IV)(rx_origin - strbeg), (IV)(endpos - strbeg)));

  s = find_byclass(prog, progi->regstclass, rx_origin, endpos,
       reginfo);
  if (!s) {
   if (endpos == strend) {
    DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
        "  Could not match STCLASS...\n") );
    goto fail;
   }
   DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
       "  This position contradicts STCLASS...\n") );
   if ((prog->intflags & PREGf_ANCH) && !ml_anch
      && !(prog->intflags & PREGf_IMPLICIT))
    goto fail;

   /* Contradict one of substrings */
   if (prog->anchored_substr || prog->anchored_utf8) {
    if (prog->substrs->check_ix == 1) { /* check is float */
     /* Have both, check_string is floating */
     assert(rx_origin + start_shift <= check_at);
     if (rx_origin + start_shift != check_at) {
      /* not at latest position float substr could match:
      * Recheck anchored substring, but not floating.
      * The condition above is in bytes rather than
      * chars for efficiency. It's conservative, in
      * that it errs on the side of doing 'goto
      * do_other_substr', where a more accurate
      * char-based calculation will be done */
      DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
        "  Looking for anchored substr starting at offset %ld...\n",
        (long)(other_last - strpos)) );
      goto do_other_substr;
     }
    }
   }
   else {
    /* float-only */

    if (ml_anch) {
     /* In the presence of ml_anch, we might be able to
     * find another \n without breaking the current float
     * constraint. */

     /* strictly speaking this should be HOP3c(..., 1, ...),
     * but since we goto a block of code that's going to
     * search for the next \n if any, its safe here */
     rx_origin++;
     DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
       "  Looking for /%s^%s/m starting at offset %ld...\n",
       PL_colors[0], PL_colors[1],
       (long)(rx_origin - strpos)) );
     goto postprocess_substr_matches;
    }

    /* strictly speaking this can never be true; but might
    * be if we ever allow intuit without substrings */
    if (!(utf8_target ? prog->float_utf8 : prog->float_substr))
     goto fail;

    rx_origin = rx_max_float;
   }

   /* at this point, any matching substrings have been
   * contradicted. Start again... */

   rx_origin = HOP3c(rx_origin, 1, strend);

   /* uses bytes rather than char calculations for efficiency.
   * It's conservative: it errs on the side of doing 'goto restart',
   * where there is code that does a proper char-based test */
   if (rx_origin + start_shift + end_shift > strend) {
    DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
         "  Could not match STCLASS...\n") );
    goto fail;
   }
   DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
    "  Looking for %s substr starting at offset %ld...\n",
    (prog->substrs->check_ix ? "floating" : "anchored"),
    (long)(rx_origin + start_shift - strpos)) );
   goto restart;
  }

  /* Success !!! */

  if (rx_origin != s) {
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
      "  By STCLASS: moving %ld --> %ld\n",
        (long)(rx_origin - strpos), (long)(s - strpos))
    );
  }
  else {
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
        "  Does not contradict STCLASS...\n");
    );
  }
 }

 /* Decide whether using the substrings helped */

 if (rx_origin != strpos) {
  /* Fixed substring is found far enough so that the match
  cannot start at strpos. */

  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "  try at offset...\n"));
  ++BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr); /* hooray/5 */
 }
 else {
  /* The found rx_origin position does not prohibit matching at
  * strpos, so calling intuit didn't gain us anything. Decrement
  * the BmUSEFUL() count on the check substring, and if we reach
  * zero, free it.  */
  if (!(prog->intflags & PREGf_NAUGHTY)
   && (utf8_target ? (
    prog->check_utf8  /* Could be deleted already */
    && --BmUSEFUL(prog->check_utf8) < 0
    && (prog->check_utf8 == prog->float_utf8)
   ) : (
    prog->check_substr  /* Could be deleted already */
    && --BmUSEFUL(prog->check_substr) < 0
    && (prog->check_substr == prog->float_substr)
   )))
  {
   /* If flags & SOMETHING - do not do it many times on the same match */
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "  ... Disabling check substring...\n"));
   /* XXX Does the destruction order has to change with utf8_target? */
   SvREFCNT_dec(utf8_target ? prog->check_utf8 : prog->check_substr);
   SvREFCNT_dec(utf8_target ? prog->check_substr : prog->check_utf8);
   prog->check_substr = prog->check_utf8 = NULL; /* disable */
   prog->float_substr = prog->float_utf8 = NULL; /* clear */
   check = NULL;   /* abort */
   /* XXXX This is a remnant of the old implementation.  It
     looks wasteful, since now INTUIT can use many
     other heuristics. */
   prog->extflags &= ~RXf_USE_INTUIT;
  }
 }

 DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
   "Intuit: %sSuccessfully guessed:%s match at offset %ld\n",
   PL_colors[4], PL_colors[5], (long)(rx_origin - strpos)) );

 return rx_origin;

  fail_finish:    /* Substring not found */
 if (prog->check_substr || prog->check_utf8)  /* could be removed already */
  BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr) += 5; /* hooray */
  fail:
 DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch rejected by optimizer%s\n",
      PL_colors[4], PL_colors[5]));
 return NULL;
}


#define DECL_TRIE_TYPE(scan) \
 const enum { trie_plain, trie_utf8, trie_utf8_fold, trie_latin_utf8_fold, \
    trie_utf8_exactfa_fold, trie_latin_utf8_exactfa_fold } \
     trie_type = ((scan->flags == EXACT) \
       ? (utf8_target ? trie_utf8 : trie_plain) \
       : (scan->flags == EXACTFA) \
        ? (utf8_target ? trie_utf8_exactfa_fold : trie_latin_utf8_exactfa_fold) \
        : (utf8_target ? trie_utf8_fold : trie_latin_utf8_fold))

#define REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc, uscan, len, uvc, charid, foldlen, foldbuf, uniflags) \
STMT_START {                                                                        \
 STRLEN skiplen;                                                                 \
 U8 flags = FOLD_FLAGS_FULL;                                                     \
 switch (trie_type) {                                                            \
 case trie_utf8_exactfa_fold:                                                    \
  flags |= FOLD_FLAGS_NOMIX_ASCII;                                            \
  /* FALLTHROUGH */                                                          \
 case trie_utf8_fold:                                                            \
  if ( foldlen>0 ) {                                                          \
   uvc = utf8n_to_uvchr( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
   foldlen -= len;                                                         \
   uscan += len;                                                           \
   len=0;                                                                  \
  } else {                                                                    \
   uvc = _to_utf8_fold_flags( (const U8*) uc, foldbuf, &foldlen, flags);   \
   len = UTF8SKIP(uc);                                                     \
   skiplen = UNISKIP( uvc );                                               \
   foldlen -= skiplen;                                                     \
   uscan = foldbuf + skiplen;                                              \
  }                                                                           \
  break;                                                                      \
 case trie_latin_utf8_exactfa_fold:                                              \
  flags |= FOLD_FLAGS_NOMIX_ASCII;                                            \
  /* FALLTHROUGH */                                                          \
 case trie_latin_utf8_fold:                                                      \
  if ( foldlen>0 ) {                                                          \
   uvc = utf8n_to_uvchr( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
   foldlen -= len;                                                         \
   uscan += len;                                                           \
   len=0;                                                                  \
  } else {                                                                    \
   len = 1;                                                                \
   uvc = _to_fold_latin1( (U8) *uc, foldbuf, &foldlen, flags);             \
   skiplen = UNISKIP( uvc );                                               \
   foldlen -= skiplen;                                                     \
   uscan = foldbuf + skiplen;                                              \
  }                                                                           \
  break;                                                                      \
 case trie_utf8:                                                                 \
  uvc = utf8n_to_uvchr( (const U8*) uc, UTF8_MAXLEN, &len, uniflags );        \
  break;                                                                      \
 case trie_plain:                                                                \
  uvc = (UV)*uc;                                                              \
  len = 1;                                                                    \
 }                                                                               \
 if (uvc < 256) {                                                                \
  charid = trie->charmap[ uvc ];                                              \
 }                                                                               \
 else {                                                                          \
  charid = 0;                                                                 \
  if (widecharmap) {                                                          \
   SV** const svpp = hv_fetch(widecharmap,                                 \
      (char*)&uvc, sizeof(UV), 0);                                \
   if (svpp)                                                               \
    charid = (U16)SvIV(*svpp);                                          \
  }                                                                           \
 }                                                                               \
} STMT_END

#define DUMP_EXEC_POS(li,s,doutf8)                          \
 dump_exec_pos(li,s,(reginfo->strend),(reginfo->strbeg), \
    startpos, doutf8)

#define REXEC_FBC_EXACTISH_SCAN(COND)                     \
STMT_START {                                              \
 while (s <= e) {                                      \
  if ( (COND)                                       \
   && (ln == 1 || folder(s, pat_string, ln))    \
   && (reginfo->intuit || regtry(reginfo, &s)) )\
   goto got_it;                                  \
  s++;                                              \
 }                                                     \
} STMT_END

#define REXEC_FBC_UTF8_SCAN(CODE)                     \
STMT_START {                                          \
 while (s < strend) {                              \
  CODE                                          \
  s += UTF8SKIP(s);                             \
 }                                                 \
} STMT_END

#define REXEC_FBC_SCAN(CODE)                          \
STMT_START {                                          \
 while (s < strend) {                              \
  CODE                                          \
  s++;                                          \
 }                                                 \
} STMT_END

#define REXEC_FBC_UTF8_CLASS_SCAN(COND)                        \
REXEC_FBC_UTF8_SCAN( /* Loops while (s < strend) */            \
 if (COND) {                                                \
  if (tmp && (reginfo->intuit || regtry(reginfo, &s)))   \
   goto got_it;                                       \
  else                                                   \
   tmp = doevery;                                     \
 }                                                          \
 else                                                       \
  tmp = 1;                                               \
)

#define REXEC_FBC_CLASS_SCAN(COND)                             \
REXEC_FBC_SCAN( /* Loops while (s < strend) */                 \
 if (COND) {                                                \
  if (tmp && (reginfo->intuit || regtry(reginfo, &s)))   \
   goto got_it;                                       \
  else                                                   \
   tmp = doevery;                                     \
 }                                                          \
 else                                                       \
  tmp = 1;                                               \
)

#define REXEC_FBC_CSCAN(CONDUTF8,COND)                         \
 if (utf8_target) {                                         \
  REXEC_FBC_UTF8_CLASS_SCAN(CONDUTF8);                   \
 }                                                          \
 else {                                                     \
  REXEC_FBC_CLASS_SCAN(COND);                            \
 }

/* The three macros below are slightly different versions of the same logic.
 *
 * The first is for /a and /aa when the target string is UTF-8.  This can only
 * match ascii, but it must advance based on UTF-8.   The other two handle the
 * non-UTF-8 and the more generic UTF-8 cases.   In all three, we are looking
 * for the boundary (or non-boundary) between a word and non-word character.
 * The utf8 and non-utf8 cases have the same logic, but the details must be
 * different.  Find the "wordness" of the character just prior to this one, and
 * compare it with the wordness of this one.  If they differ, we have a
 * boundary.  At the beginning of the string, pretend that the previous
 * character was a new-line.
 *
 * All these macros uncleanly have side-effects with each other and outside
 * variables.  So far it's been too much trouble to clean-up
 *
 * TEST_NON_UTF8 is the macro or function to call to test if its byte input is
 *               a word character or not.
 * IF_SUCCESS    is code to do if it finds that we are at a boundary between
 *               word/non-word
 * IF_FAIL       is code to do if we aren't at a boundary between word/non-word
 *
 * Exactly one of the two IF_FOO parameters is a no-op, depending on whether we
 * are looking for a boundary or for a non-boundary.  If we are looking for a
 * boundary, we want IF_FAIL to be the no-op, and for IF_SUCCESS to go out and
 * see if this tentative match actually works, and if so, to quit the loop
 * here.  And vice-versa if we are looking for a non-boundary.
 *
 * 'tmp' below in the next three macros in the REXEC_FBC_SCAN and
 * REXEC_FBC_UTF8_SCAN loops is a loop invariant, a bool giving the return of
 * TEST_NON_UTF8(s-1).  To see this, note that that's what it is defined to be
 * at entry to the loop, and to get to the IF_FAIL branch, tmp must equal
 * TEST_NON_UTF8(s), and in the opposite branch, IF_SUCCESS, tmp is that
 * complement.  But in that branch we complement tmp, meaning that at the
 * bottom of the loop tmp is always going to be equal to TEST_NON_UTF8(s),
 * which means at the top of the loop in the next iteration, it is
 * TEST_NON_UTF8(s-1) */
#define FBC_UTF8_A(TEST_NON_UTF8, IF_SUCCESS, IF_FAIL)                         \
 tmp = (s != reginfo->strbeg) ? UCHARAT(s - 1) : '\n';                      \
 tmp = TEST_NON_UTF8(tmp);                                                  \
 REXEC_FBC_UTF8_SCAN( /* advances s while s < strend */                     \
  if (tmp == ! TEST_NON_UTF8((U8) *s)) {                                 \
   tmp = !tmp;                                                        \
   IF_SUCCESS; /* Is a boundary if values for s-1 and s differ */     \
  }                                                                      \
  else {                                                                 \
   IF_FAIL;                                                           \
  }                                                                      \
 );                                                                         \

/* Like FBC_UTF8_A, but TEST_UV is a macro which takes a UV as its input, and
 * TEST_UTF8 is a macro that for the same input code points returns identically
 * to TEST_UV, but takes a pointer to a UTF-8 encoded string instead */
#define FBC_UTF8(TEST_UV, TEST_UTF8, IF_SUCCESS, IF_FAIL)                      \
 if (s == reginfo->strbeg) {                                                \
  tmp = '\n';                                                            \
 }                                                                          \
 else { /* Back-up to the start of the previous character */                \
  U8 * const r = reghop3((U8*)s, -1, (U8*)reginfo->strbeg);              \
  tmp = utf8n_to_uvchr(r, (U8*) reginfo->strend - r,                     \
             0, UTF8_ALLOW_DEFAULT); \
 }                                                                          \
 tmp = TEST_UV(tmp);                                                        \
 LOAD_UTF8_CHARCLASS_ALNUM();                                               \
 REXEC_FBC_UTF8_SCAN( /* advances s while s < strend */                     \
  if (tmp == ! (TEST_UTF8((U8 *) s))) {                                  \
   tmp = !tmp;                                                        \
   IF_SUCCESS;                                                        \
  }                                                                      \
  else {                                                                 \
   IF_FAIL;                                                           \
  }                                                                      \
 );

/* Like the above two macros.  UTF8_CODE is the complete code for handling
 * UTF-8.  Common to the BOUND and NBOUND cases, set-up by the FBC_BOUND, etc
 * macros below */
#define FBC_BOUND_COMMON(UTF8_CODE, TEST_NON_UTF8, IF_SUCCESS, IF_FAIL)        \
 if (utf8_target) {                                                         \
  UTF8_CODE                                                              \
 }                                                                          \
 else {  /* Not utf8 */                                                     \
  tmp = (s != reginfo->strbeg) ? UCHARAT(s - 1) : '\n';                  \
  tmp = TEST_NON_UTF8(tmp);                                              \
  REXEC_FBC_SCAN( /* advances s while s < strend */                      \
   if (tmp == ! TEST_NON_UTF8((U8) *s)) {                             \
    IF_SUCCESS;                                                    \
    tmp = !tmp;                                                    \
   }                                                                  \
   else {                                                             \
    IF_FAIL;                                                       \
   }                                                                  \
  );                                                                     \
 }                                                                          \
 /* Here, things have been set up by the previous code so that tmp is the   \
 * return of TEST_NON_UTF(s-1) or TEST_UTF8(s-1) (depending on the         \
 * utf8ness of the target).  We also have to check if this matches against \
 * the EOS, which we treat as a \n (which is the same value in both UTF-8  \
 * or non-UTF8, so can use the non-utf8 test condition even for a UTF-8    \
 * string */                                                               \
 if (tmp == ! TEST_NON_UTF8('\n')) {                                        \
  IF_SUCCESS;                                                            \
 }                                                                          \
 else {                                                                     \
  IF_FAIL;                                                               \
 }

/* This is the macro to use when we want to see if something that looks like it
 * could match, actually does, and if so exits the loop */
#define REXEC_FBC_TRYIT                            \
 if ((reginfo->intuit || regtry(reginfo, &s)))  \
  goto got_it

/* The only difference between the BOUND and NBOUND cases is that
 * REXEC_FBC_TRYIT is called when matched in BOUND, and when non-matched in
 * NBOUND.  This is accomplished by passing it as either the if or else clause,
 * with the other one being empty (PLACEHOLDER is defined as empty).
 *
 * The TEST_FOO parameters are for operating on different forms of input, but
 * all should be ones that return identically for the same underlying code
 * points */
#define FBC_BOUND(TEST_NON_UTF8, TEST_UV, TEST_UTF8)                           \
 FBC_BOUND_COMMON(                                                          \
  FBC_UTF8(TEST_UV, TEST_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER),          \
  TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)

#define FBC_BOUND_A(TEST_NON_UTF8, TEST_UV, TEST_UTF8)                         \
 FBC_BOUND_COMMON(                                                          \
   FBC_UTF8_A(TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER),           \
   TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)

#define FBC_NBOUND(TEST_NON_UTF8, TEST_UV, TEST_UTF8)                          \
 FBC_BOUND_COMMON(                                                          \
  FBC_UTF8(TEST_UV, TEST_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT),          \
  TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)

#define FBC_NBOUND_A(TEST_NON_UTF8, TEST_UV, TEST_UTF8)                        \
 FBC_BOUND_COMMON(                                                          \
   FBC_UTF8_A(TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT),           \
   TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)


/* We know what class REx starts with.  Try to find this position... */
/* if reginfo->intuit, its a dryrun */
/* annoyingly all the vars in this routine have different names from their counterparts
   in regmatch. /grrr */
STATIC char *
S_find_byclass(pTHX_ regexp * prog, const regnode *c, char *s,
 const char *strend, regmatch_info *reginfo)
{
 dVAR;
 const I32 doevery = (prog->intflags & PREGf_SKIP) == 0;
 char *pat_string;   /* The pattern's exactish string */
 char *pat_end;     /* ptr to end char of pat_string */
 re_fold_t folder; /* Function for computing non-utf8 folds */
 const U8 *fold_array;   /* array for folding ords < 256 */
 STRLEN ln;
 STRLEN lnc;
 U8 c1;
 U8 c2;
 char *e;
 I32 tmp = 1; /* Scratch variable? */
 const bool utf8_target = reginfo->is_utf8_target;
 UV utf8_fold_flags = 0;
 const bool is_utf8_pat = reginfo->is_utf8_pat;
 bool to_complement = FALSE; /* Invert the result?  Taking the xor of this
        with a result inverts that result, as 0^1 =
        1 and 1^1 = 0 */
 _char_class_number classnum;

 RXi_GET_DECL(prog,progi);

 PERL_ARGS_ASSERT_FIND_BYCLASS;

 /* We know what class it must start with. */
 switch (OP(c)) {
 case ANYOF:
  if (utf8_target) {
   REXEC_FBC_UTF8_CLASS_SCAN(
     reginclass(prog, c, (U8*)s, (U8*) strend, utf8_target));
  }
  else {
   REXEC_FBC_CLASS_SCAN(REGINCLASS(prog, c, (U8*)s));
  }
  break;
 case CANY:
  REXEC_FBC_SCAN(
   if (tmp && (reginfo->intuit || regtry(reginfo, &s)))
    goto got_it;
   else
    tmp = doevery;
  );
  break;

 case EXACTFA_NO_TRIE:   /* This node only generated for non-utf8 patterns */
  assert(! is_utf8_pat);
  /* FALLTHROUGH */
 case EXACTFA:
  if (is_utf8_pat || utf8_target) {
   utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
   goto do_exactf_utf8;
  }
  fold_array = PL_fold_latin1;    /* Latin1 folds are not affected by */
  folder = foldEQ_latin1;         /* /a, except the sharp s one which */
  goto do_exactf_non_utf8; /* isn't dealt with by these */

 case EXACTF:   /* This node only generated for non-utf8 patterns */
  assert(! is_utf8_pat);
  if (utf8_target) {
   utf8_fold_flags = 0;
   goto do_exactf_utf8;
  }
  fold_array = PL_fold;
  folder = foldEQ;
  goto do_exactf_non_utf8;

 case EXACTFL:
  if (is_utf8_pat || utf8_target || IN_UTF8_CTYPE_LOCALE) {
   utf8_fold_flags = FOLDEQ_LOCALE;
   goto do_exactf_utf8;
  }
  fold_array = PL_fold_locale;
  folder = foldEQ_locale;
  goto do_exactf_non_utf8;

 case EXACTFU_SS:
  if (is_utf8_pat) {
   utf8_fold_flags = FOLDEQ_S2_ALREADY_FOLDED;
  }
  goto do_exactf_utf8;

 case EXACTFU:
  if (is_utf8_pat || utf8_target) {
   utf8_fold_flags = is_utf8_pat ? FOLDEQ_S2_ALREADY_FOLDED : 0;
   goto do_exactf_utf8;
  }

  /* Any 'ss' in the pattern should have been replaced by regcomp,
  * so we don't have to worry here about this single special case
  * in the Latin1 range */
  fold_array = PL_fold_latin1;
  folder = foldEQ_latin1;

  /* FALLTHROUGH */

 do_exactf_non_utf8: /* Neither pattern nor string are UTF8, and there
      are no glitches with fold-length differences
      between the target string and pattern */

  /* The idea in the non-utf8 EXACTF* cases is to first find the
  * first character of the EXACTF* node and then, if necessary,
  * case-insensitively compare the full text of the node.  c1 is the
  * first character.  c2 is its fold.  This logic will not work for
  * Unicode semantics and the german sharp ss, which hence should
  * not be compiled into a node that gets here. */
  pat_string = STRING(c);
  ln  = STR_LEN(c); /* length to match in octets/bytes */

  /* We know that we have to match at least 'ln' bytes (which is the
  * same as characters, since not utf8).  If we have to match 3
  * characters, and there are only 2 availabe, we know without
  * trying that it will fail; so don't start a match past the
  * required minimum number from the far end */
  e = HOP3c(strend, -((SSize_t)ln), s);

  if (reginfo->intuit && e < s) {
   e = s;   /* Due to minlen logic of intuit() */
  }

  c1 = *pat_string;
  c2 = fold_array[c1];
  if (c1 == c2) { /* If char and fold are the same */
   REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1);
  }
  else {
   REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1 || *(U8*)s == c2);
  }
  break;

 do_exactf_utf8:
 {
  unsigned expansion;

  /* If one of the operands is in utf8, we can't use the simpler folding
  * above, due to the fact that many different characters can have the
  * same fold, or portion of a fold, or different- length fold */
  pat_string = STRING(c);
  ln  = STR_LEN(c); /* length to match in octets/bytes */
  pat_end = pat_string + ln;
  lnc = is_utf8_pat       /* length to match in characters */
    ? utf8_length((U8 *) pat_string, (U8 *) pat_end)
    : ln;

  /* We have 'lnc' characters to match in the pattern, but because of
  * multi-character folding, each character in the target can match
  * up to 3 characters (Unicode guarantees it will never exceed
  * this) if it is utf8-encoded; and up to 2 if not (based on the
  * fact that the Latin 1 folds are already determined, and the
  * only multi-char fold in that range is the sharp-s folding to
  * 'ss'.  Thus, a pattern character can match as little as 1/3 of a
  * string character.  Adjust lnc accordingly, rounding up, so that
  * if we need to match at least 4+1/3 chars, that really is 5. */
  expansion = (utf8_target) ? UTF8_MAX_FOLD_CHAR_EXPAND : 2;
  lnc = (lnc + expansion - 1) / expansion;

  /* As in the non-UTF8 case, if we have to match 3 characters, and
  * only 2 are left, it's guaranteed to fail, so don't start a
  * match that would require us to go beyond the end of the string
  */
  e = HOP3c(strend, -((SSize_t)lnc), s);

  if (reginfo->intuit && e < s) {
   e = s;   /* Due to minlen logic of intuit() */
  }

  /* XXX Note that we could recalculate e to stop the loop earlier,
  * as the worst case expansion above will rarely be met, and as we
  * go along we would usually find that e moves further to the left.
  * This would happen only after we reached the point in the loop
  * where if there were no expansion we should fail.  Unclear if
  * worth the expense */

  while (s <= e) {
   char *my_strend= (char *)strend;
   if (foldEQ_utf8_flags(s, &my_strend, 0,  utf8_target,
    pat_string, NULL, ln, is_utf8_pat, utf8_fold_flags)
    && (reginfo->intuit || regtry(reginfo, &s)) )
   {
    goto got_it;
   }
   s += (utf8_target) ? UTF8SKIP(s) : 1;
  }
  break;
 }

 case BOUNDL:
  FBC_BOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8);
  break;
 case NBOUNDL:
  FBC_NBOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8);
  break;
 case BOUND:
  FBC_BOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8);
  break;
 case BOUNDA:
  FBC_BOUND_A(isWORDCHAR_A, isWORDCHAR_A, isWORDCHAR_A);
  break;
 case NBOUND:
  FBC_NBOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8);
  break;
 case NBOUNDA:
  FBC_NBOUND_A(isWORDCHAR_A, isWORDCHAR_A, isWORDCHAR_A);
  break;
 case BOUNDU:
  FBC_BOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8);
  break;
 case NBOUNDU:
  FBC_NBOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8);
  break;
 case LNBREAK:
  REXEC_FBC_CSCAN(is_LNBREAK_utf8_safe(s, strend),
      is_LNBREAK_latin1_safe(s, strend)
  );
  break;

 /* The argument to all the POSIX node types is the class number to pass to
 * _generic_isCC() to build a mask for searching in PL_charclass[] */

 case NPOSIXL:
  to_complement = 1;
  /* FALLTHROUGH */

 case POSIXL:
  REXEC_FBC_CSCAN(to_complement ^ cBOOL(isFOO_utf8_lc(FLAGS(c), (U8 *) s)),
      to_complement ^ cBOOL(isFOO_lc(FLAGS(c), *s)));
  break;

 case NPOSIXD:
  to_complement = 1;
  /* FALLTHROUGH */

 case POSIXD:
  if (utf8_target) {
   goto posix_utf8;
  }
  goto posixa;

 case NPOSIXA:
  if (utf8_target) {
   /* The complement of something that matches only ASCII matches all
   * non-ASCII, plus everything in ASCII that isn't in the class. */
   REXEC_FBC_UTF8_CLASS_SCAN(! isASCII_utf8(s)
         || ! _generic_isCC_A(*s, FLAGS(c)));
   break;
  }

  to_complement = 1;
  /* FALLTHROUGH */

 case POSIXA:
 posixa:
  /* Don't need to worry about utf8, as it can match only a single
  * byte invariant character. */
  REXEC_FBC_CLASS_SCAN(
      to_complement ^ cBOOL(_generic_isCC_A(*s, FLAGS(c))));
  break;

 case NPOSIXU:
  to_complement = 1;
  /* FALLTHROUGH */

 case POSIXU:
  if (! utf8_target) {
   REXEC_FBC_CLASS_SCAN(to_complement ^ cBOOL(_generic_isCC(*s,
                 FLAGS(c))));
  }
  else {

 posix_utf8:
   classnum = (_char_class_number) FLAGS(c);
   if (classnum < _FIRST_NON_SWASH_CC) {
    while (s < strend) {

     /* We avoid loading in the swash as long as possible, but
     * should we have to, we jump to a separate loop.  This
     * extra 'if' statement is what keeps this code from being
     * just a call to REXEC_FBC_UTF8_CLASS_SCAN() */
     if (UTF8_IS_ABOVE_LATIN1(*s)) {
      goto found_above_latin1;
     }
     if ((UTF8_IS_INVARIANT(*s)
      && to_complement ^ cBOOL(_generic_isCC((U8) *s,
                classnum)))
      || (UTF8_IS_DOWNGRADEABLE_START(*s)
       && to_complement ^ cBOOL(
        _generic_isCC(TWO_BYTE_UTF8_TO_NATIVE(*s,
                 *(s + 1)),
           classnum))))
     {
      if (tmp && (reginfo->intuit || regtry(reginfo, &s)))
       goto got_it;
      else {
       tmp = doevery;
      }
     }
     else {
      tmp = 1;
     }
     s += UTF8SKIP(s);
    }
   }
   else switch (classnum) {    /* These classes are implemented as
          macros */
    case _CC_ENUM_SPACE: /* XXX would require separate code if we
          revert the change of \v matching this */
     /* FALLTHROUGH */

    case _CC_ENUM_PSXSPC:
     REXEC_FBC_UTF8_CLASS_SCAN(
          to_complement ^ cBOOL(isSPACE_utf8(s)));
     break;

    case _CC_ENUM_BLANK:
     REXEC_FBC_UTF8_CLASS_SCAN(
          to_complement ^ cBOOL(isBLANK_utf8(s)));
     break;

    case _CC_ENUM_XDIGIT:
     REXEC_FBC_UTF8_CLASS_SCAN(
         to_complement ^ cBOOL(isXDIGIT_utf8(s)));
     break;

    case _CC_ENUM_VERTSPACE:
     REXEC_FBC_UTF8_CLASS_SCAN(
         to_complement ^ cBOOL(isVERTWS_utf8(s)));
     break;

    case _CC_ENUM_CNTRL:
     REXEC_FBC_UTF8_CLASS_SCAN(
          to_complement ^ cBOOL(isCNTRL_utf8(s)));
     break;

    default:
     Perl_croak(aTHX_ "panic: find_byclass() node %d='%s' has an unexpected character class '%d'", OP(c), PL_reg_name[OP(c)], classnum);
     assert(0); /* NOTREACHED */
   }
  }
  break;

 found_above_latin1:   /* Here we have to load a swash to get the result
       for the current code point */
  if (! PL_utf8_swash_ptrs[classnum]) {
   U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
   PL_utf8_swash_ptrs[classnum] =
     _core_swash_init("utf8",
         "",
         &PL_sv_undef, 1, 0,
         PL_XPosix_ptrs[classnum], &flags);
  }

  /* This is a copy of the loop above for swash classes, though using the
  * FBC macro instead of being expanded out.  Since we've loaded the
  * swash, we don't have to check for that each time through the loop */
  REXEC_FBC_UTF8_CLASS_SCAN(
    to_complement ^ cBOOL(_generic_utf8(
         classnum,
         s,
         swash_fetch(PL_utf8_swash_ptrs[classnum],
            (U8 *) s, TRUE))));
  break;

 case AHOCORASICKC:
 case AHOCORASICK:
  {
   DECL_TRIE_TYPE(c);
   /* what trie are we using right now */
   reg_ac_data *aho = (reg_ac_data*)progi->data->data[ ARG( c ) ];
   reg_trie_data *trie = (reg_trie_data*)progi->data->data[ aho->trie ];
   HV *widecharmap = MUTABLE_HV(progi->data->data[ aho->trie + 1 ]);

   const char *last_start = strend - trie->minlen;
#ifdef DEBUGGING
   const char *real_start = s;
#endif
   STRLEN maxlen = trie->maxlen;
   SV *sv_points;
   U8 **points; /* map of where we were in the input string
       when reading a given char. For ASCII this
       is unnecessary overhead as the relationship
       is always 1:1, but for Unicode, especially
       case folded Unicode this is not true. */
   U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
   U8 *bitmap=NULL;


   GET_RE_DEBUG_FLAGS_DECL;

   /* We can't just allocate points here. We need to wrap it in
   * an SV so it gets freed properly if there is a croak while
   * running the match */
   ENTER;
   SAVETMPS;
   sv_points=newSV(maxlen * sizeof(U8 *));
   SvCUR_set(sv_points,
    maxlen * sizeof(U8 *));
   SvPOK_on(sv_points);
   sv_2mortal(sv_points);
   points=(U8**)SvPV_nolen(sv_points );
   if ( trie_type != trie_utf8_fold
    && (trie->bitmap || OP(c)==AHOCORASICKC) )
   {
    if (trie->bitmap)
     bitmap=(U8*)trie->bitmap;
    else
     bitmap=(U8*)ANYOF_BITMAP(c);
   }
   /* this is the Aho-Corasick algorithm modified a touch
   to include special handling for long "unknown char" sequences.
   The basic idea being that we use AC as long as we are dealing
   with a possible matching char, when we encounter an unknown char
   (and we have not encountered an accepting state) we scan forward
   until we find a legal starting char.
   AC matching is basically that of trie matching, except that when
   we encounter a failing transition, we fall back to the current
   states "fail state", and try the current char again, a process
   we repeat until we reach the root state, state 1, or a legal
   transition. If we fail on the root state then we can either
   terminate if we have reached an accepting state previously, or
   restart the entire process from the beginning if we have not.

   */
   while (s <= last_start) {
    const U32 uniflags = UTF8_ALLOW_DEFAULT;
    U8 *uc = (U8*)s;
    U16 charid = 0;
    U32 base = 1;
    U32 state = 1;
    UV uvc = 0;
    STRLEN len = 0;
    STRLEN foldlen = 0;
    U8 *uscan = (U8*)NULL;
    U8 *leftmost = NULL;
#ifdef DEBUGGING
    U32 accepted_word= 0;
#endif
    U32 pointpos = 0;

    while ( state && uc <= (U8*)strend ) {
     int failed=0;
     U32 word = aho->states[ state ].wordnum;

     if( state==1 ) {
      if ( bitmap ) {
       DEBUG_TRIE_EXECUTE_r(
        if ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
         dump_exec_pos( (char *)uc, c, strend, real_start,
          (char *)uc, utf8_target );
         PerlIO_printf( Perl_debug_log,
          " Scanning for legal start char...\n");
        }
       );
       if (utf8_target) {
        while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
         uc += UTF8SKIP(uc);
        }
       } else {
        while ( uc <= (U8*)last_start  && !BITMAP_TEST(bitmap,*uc) ) {
         uc++;
        }
       }
       s= (char *)uc;
      }
      if (uc >(U8*)last_start) break;
     }

     if ( word ) {
      U8 *lpos= points[ (pointpos - trie->wordinfo[word].len) % maxlen ];
      if (!leftmost || lpos < leftmost) {
       DEBUG_r(accepted_word=word);
       leftmost= lpos;
      }
      if (base==0) break;

     }
     points[pointpos++ % maxlen]= uc;
     if (foldlen || uc < (U8*)strend) {
      REXEC_TRIE_READ_CHAR(trie_type, trie,
          widecharmap, uc,
          uscan, len, uvc, charid, foldlen,
          foldbuf, uniflags);
      DEBUG_TRIE_EXECUTE_r({
       dump_exec_pos( (char *)uc, c, strend,
          real_start, s, utf8_target);
       PerlIO_printf(Perl_debug_log,
        " Charid:%3u CP:%4"UVxf" ",
        charid, uvc);
      });
     }
     else {
      len = 0;
      charid = 0;
     }


     do {
#ifdef DEBUGGING
      word = aho->states[ state ].wordnum;
#endif
      base = aho->states[ state ].trans.base;

      DEBUG_TRIE_EXECUTE_r({
       if (failed)
        dump_exec_pos( (char *)uc, c, strend, real_start,
         s,   utf8_target );
       PerlIO_printf( Perl_debug_log,
        "%sState: %4"UVxf", word=%"UVxf,
        failed ? " Fail transition to " : "",
        (UV)state, (UV)word);
      });
      if ( base ) {
       U32 tmp;
       I32 offset;
       if (charid &&
        ( ((offset = base + charid
         - 1 - trie->uniquecharcount)) >= 0)
        && ((U32)offset < trie->lasttrans)
        && trie->trans[offset].check == state
        && (tmp=trie->trans[offset].next))
       {
        DEBUG_TRIE_EXECUTE_r(
         PerlIO_printf( Perl_debug_log," - legal\n"));
        state = tmp;
        break;
       }
       else {
        DEBUG_TRIE_EXECUTE_r(
         PerlIO_printf( Perl_debug_log," - fail\n"));
        failed = 1;
        state = aho->fail[state];
       }
      }
      else {
       /* we must be accepting here */
       DEBUG_TRIE_EXECUTE_r(
         PerlIO_printf( Perl_debug_log," - accepting\n"));
       failed = 1;
       break;
      }
     } while(state);
     uc += len;
     if (failed) {
      if (leftmost)
       break;
      if (!state) state = 1;
     }
    }
    if ( aho->states[ state ].wordnum ) {
     U8 *lpos = points[ (pointpos - trie->wordinfo[aho->states[ state ].wordnum].len) % maxlen ];
     if (!leftmost || lpos < leftmost) {
      DEBUG_r(accepted_word=aho->states[ state ].wordnum);
      leftmost = lpos;
     }
    }
    if (leftmost) {
     s = (char*)leftmost;
     DEBUG_TRIE_EXECUTE_r({
      PerlIO_printf(
       Perl_debug_log,"Matches word #%"UVxf" at position %"IVdf". Trying full pattern...\n",
       (UV)accepted_word, (IV)(s - real_start)
      );
     });
     if (reginfo->intuit || regtry(reginfo, &s)) {
      FREETMPS;
      LEAVE;
      goto got_it;
     }
     s = HOPc(s,1);
     DEBUG_TRIE_EXECUTE_r({
      PerlIO_printf( Perl_debug_log,"Pattern failed. Looking for new start point...\n");
     });
    } else {
     DEBUG_TRIE_EXECUTE_r(
      PerlIO_printf( Perl_debug_log,"No match.\n"));
     break;
    }
   }
   FREETMPS;
   LEAVE;
  }
  break;
 default:
  Perl_croak(aTHX_ "panic: unknown regstclass %d", (int)OP(c));
 }
 return 0;
  got_it:
 return s;
}

/* set RX_SAVED_COPY, RX_SUBBEG etc.
 * flags have same meanings as with regexec_flags() */

static void
S_reg_set_capture_string(pTHX_ REGEXP * const rx,
       char *strbeg,
       char *strend,
       SV *sv,
       U32 flags,
       bool utf8_target)
{
 struct regexp *const prog = ReANY(rx);

 if (flags & REXEC_COPY_STR) {
#ifdef PERL_ANY_COW
  if (SvCANCOW(sv)) {
   if (DEBUG_C_TEST) {
    PerlIO_printf(Perl_debug_log,
       "Copy on write: regexp capture, type %d\n",
       (int) SvTYPE(sv));
   }
   /* Create a new COW SV to share the match string and store
   * in saved_copy, unless the current COW SV in saved_copy
   * is valid and suitable for our purpose */
   if ((   prog->saved_copy
    && SvIsCOW(prog->saved_copy)
    && SvPOKp(prog->saved_copy)
    && SvIsCOW(sv)
    && SvPOKp(sv)
    && SvPVX(sv) == SvPVX(prog->saved_copy)))
   {
    /* just reuse saved_copy SV */
    if (RXp_MATCH_COPIED(prog)) {
     Safefree(prog->subbeg);
     RXp_MATCH_COPIED_off(prog);
    }
   }
   else {
    /* create new COW SV to share string */
    RX_MATCH_COPY_FREE(rx);
    prog->saved_copy = sv_setsv_cow(prog->saved_copy, sv);
   }
   prog->subbeg = (char *)SvPVX_const(prog->saved_copy);
   assert (SvPOKp(prog->saved_copy));
   prog->sublen  = strend - strbeg;
   prog->suboffset = 0;
   prog->subcoffset = 0;
  } else
#endif
  {
   SSize_t min = 0;
   SSize_t max = strend - strbeg;
   SSize_t sublen;

   if (    (flags & REXEC_COPY_SKIP_POST)
    && !(prog->extflags & RXf_PMf_KEEPCOPY) /* //p */
    && !(PL_sawampersand & SAWAMPERSAND_RIGHT)
   ) { /* don't copy $' part of string */
    U32 n = 0;
    max = -1;
    /* calculate the right-most part of the string covered
    * by a capture. Due to look-ahead, this may be to
    * the right of $&, so we have to scan all captures */
    while (n <= prog->lastparen) {
     if (prog->offs[n].end > max)
      max = prog->offs[n].end;
     n++;
    }
    if (max == -1)
     max = (PL_sawampersand & SAWAMPERSAND_LEFT)
       ? prog->offs[0].start
       : 0;
    assert(max >= 0 && max <= strend - strbeg);
   }

   if (    (flags & REXEC_COPY_SKIP_PRE)
    && !(prog->extflags & RXf_PMf_KEEPCOPY) /* //p */
    && !(PL_sawampersand & SAWAMPERSAND_LEFT)
   ) { /* don't copy $` part of string */
    U32 n = 0;
    min = max;
    /* calculate the left-most part of the string covered
    * by a capture. Due to look-behind, this may be to
    * the left of $&, so we have to scan all captures */
    while (min && n <= prog->lastparen) {
     if (   prog->offs[n].start != -1
      && prog->offs[n].start < min)
     {
      min = prog->offs[n].start;
     }
     n++;
    }
    if ((PL_sawampersand & SAWAMPERSAND_RIGHT)
     && min >  prog->offs[0].end
    )
     min = prog->offs[0].end;

   }

   assert(min >= 0 && min <= max && min <= strend - strbeg);
   sublen = max - min;

   if (RX_MATCH_COPIED(rx)) {
    if (sublen > prog->sublen)
     prog->subbeg =
       (char*)saferealloc(prog->subbeg, sublen+1);
   }
   else
    prog->subbeg = (char*)safemalloc(sublen+1);
   Copy(strbeg + min, prog->subbeg, sublen, char);
   prog->subbeg[sublen] = '\0';
   prog->suboffset = min;
   prog->sublen = sublen;
   RX_MATCH_COPIED_on(rx);
  }
  prog->subcoffset = prog->suboffset;
  if (prog->suboffset && utf8_target) {
   /* Convert byte offset to chars.
   * XXX ideally should only compute this if @-/@+
   * has been seen, a la PL_sawampersand ??? */

   /* If there's a direct correspondence between the
   * string which we're matching and the original SV,
   * then we can use the utf8 len cache associated with
   * the SV. In particular, it means that under //g,
   * sv_pos_b2u() will use the previously cached
   * position to speed up working out the new length of
   * subcoffset, rather than counting from the start of
   * the string each time. This stops
   *   $x = "\x{100}" x 1E6; 1 while $x =~ /(.)/g;
   * from going quadratic */
   if (SvPOKp(sv) && SvPVX(sv) == strbeg)
    prog->subcoffset = sv_pos_b2u_flags(sv, prog->subcoffset,
            SV_GMAGIC|SV_CONST_RETURN);
   else
    prog->subcoffset = utf8_length((U8*)strbeg,
         (U8*)(strbeg+prog->suboffset));
  }
 }
 else {
  RX_MATCH_COPY_FREE(rx);
  prog->subbeg = strbeg;
  prog->suboffset = 0;
  prog->subcoffset = 0;
  prog->sublen = strend - strbeg;
 }
}




/*
 - regexec_flags - match a regexp against a string
 */
I32
Perl_regexec_flags(pTHX_ REGEXP * const rx, char *stringarg, char *strend,
   char *strbeg, SSize_t minend, SV *sv, void *data, U32 flags)
/* stringarg: the point in the string at which to begin matching */
/* strend:    pointer to null at end of string */
/* strbeg:    real beginning of string */
/* minend:    end of match must be >= minend bytes after stringarg. */
/* sv:        SV being matched: only used for utf8 flag, pos() etc; string
 *            itself is accessed via the pointers above */
/* data:      May be used for some additional optimizations.
   Currently unused. */
/* flags:     For optimizations. See REXEC_* in regexp.h */

{
 struct regexp *const prog = ReANY(rx);
 char *s;
 regnode *c;
 char *startpos;
 SSize_t minlen;  /* must match at least this many chars */
 SSize_t dontbother = 0; /* how many characters not to try at end */
 const bool utf8_target = cBOOL(DO_UTF8(sv));
 I32 multiline;
 RXi_GET_DECL(prog,progi);
 regmatch_info reginfo_buf;  /* create some info to pass to regtry etc */
 regmatch_info *const reginfo = &reginfo_buf;
 regexp_paren_pair *swap = NULL;
 I32 oldsave;
 GET_RE_DEBUG_FLAGS_DECL;

 PERL_ARGS_ASSERT_REGEXEC_FLAGS;
 PERL_UNUSED_ARG(data);

 /* Be paranoid... */
 if (prog == NULL || stringarg == NULL) {
  Perl_croak(aTHX_ "NULL regexp parameter");
 }

 DEBUG_EXECUTE_r(
  debug_start_match(rx, utf8_target, stringarg, strend,
  "Matching");
 );

 startpos = stringarg;

 if (prog->intflags & PREGf_GPOS_SEEN) {
  MAGIC *mg;

  /* set reginfo->ganch, the position where \G can match */

  reginfo->ganch =
   (flags & REXEC_IGNOREPOS)
   ? stringarg /* use start pos rather than pos() */
   : (sv && (mg = mg_find_mglob(sv)) && mg->mg_len >= 0)
   /* Defined pos(): */
   ? strbeg + MgBYTEPOS(mg, sv, strbeg, strend-strbeg)
   : strbeg; /* pos() not defined; use start of string */

  DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
   "GPOS ganch set to strbeg[%"IVdf"]\n", (IV)(reginfo->ganch - strbeg)));

  /* in the presence of \G, we may need to start looking earlier in
  * the string than the suggested start point of stringarg:
  * if prog->gofs is set, then that's a known, fixed minimum
  * offset, such as
  * /..\G/:   gofs = 2
  * /ab|c\G/: gofs = 1
  * or if the minimum offset isn't known, then we have to go back
  * to the start of the string, e.g. /w+\G/
  */

  if (prog->intflags & PREGf_ANCH_GPOS) {
   startpos  = reginfo->ganch - prog->gofs;
   if (startpos <
    ((flags & REXEC_FAIL_ON_UNDERFLOW) ? stringarg : strbeg))
   {
    DEBUG_r(PerlIO_printf(Perl_debug_log,
      "fail: ganch-gofs before earliest possible start\n"));
    return 0;
   }
  }
  else if (prog->gofs) {
   if (startpos - prog->gofs < strbeg)
    startpos = strbeg;
   else
    startpos -= prog->gofs;
  }
  else if (prog->intflags & PREGf_GPOS_FLOAT)
   startpos = strbeg;
 }

 minlen = prog->minlen;
 if ((startpos + minlen) > strend || startpos < strbeg) {
  DEBUG_r(PerlIO_printf(Perl_debug_log,
     "Regex match can't succeed, so not even tried\n"));
  return 0;
 }

 /* at the end of this function, we'll do a LEAVE_SCOPE(oldsave),
 * which will call destuctors to reset PL_regmatch_state, free higher
 * PL_regmatch_slabs, and clean up regmatch_info_aux and
 * regmatch_info_aux_eval */

 oldsave = PL_savestack_ix;

 s = startpos;

 if ((prog->extflags & RXf_USE_INTUIT)
  && !(flags & REXEC_CHECKED))
 {
  s = re_intuit_start(rx, sv, strbeg, startpos, strend,
         flags, NULL);
  if (!s)
   return 0;

  if (prog->extflags & RXf_CHECK_ALL) {
   /* we can match based purely on the result of INTUIT.
   * Set up captures etc just for $& and $-[0]
   * (an intuit-only match wont have $1,$2,..) */
   assert(!prog->nparens);

   /* s/// doesn't like it if $& is earlier than where we asked it to
   * start searching (which can happen on something like /.\G/) */
   if (       (flags & REXEC_FAIL_ON_UNDERFLOW)
     && (s < stringarg))
   {
    /* this should only be possible under \G */
    assert(prog->intflags & PREGf_GPOS_SEEN);
    DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
     "matched, but failing for REXEC_FAIL_ON_UNDERFLOW\n"));
    goto phooey;
   }

   /* match via INTUIT shouldn't have any captures.
   * Let @-, @+, $^N know */
   prog->lastparen = prog->lastcloseparen = 0;
   RX_MATCH_UTF8_set(rx, utf8_target);
   prog->offs[0].start = s - strbeg;
   prog->offs[0].end = utf8_target
    ? (char*)utf8_hop((U8*)s, prog->minlenret) - strbeg
    : s - strbeg + prog->minlenret;
   if ( !(flags & REXEC_NOT_FIRST) )
    S_reg_set_capture_string(aTHX_ rx,
          strbeg, strend,
          sv, flags, utf8_target);

   return 1;
  }
 }

 multiline = prog->extflags & RXf_PMf_MULTILINE;

 if (strend - s < (minlen+(prog->check_offset_min<0?prog->check_offset_min:0))) {
  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
       "String too short [regexec_flags]...\n"));
  goto phooey;
 }

 /* Check validity of program. */
 if (UCHARAT(progi->program) != REG_MAGIC) {
  Perl_croak(aTHX_ "corrupted regexp program");
 }

 RX_MATCH_TAINTED_off(rx);

 reginfo->prog = rx;  /* Yes, sorry that this is confusing.  */
 reginfo->intuit = 0;
 reginfo->is_utf8_target = cBOOL(utf8_target);
 reginfo->is_utf8_pat = cBOOL(RX_UTF8(rx));
 reginfo->warned = FALSE;
 reginfo->strbeg  = strbeg;
 reginfo->sv = sv;
 reginfo->poscache_maxiter = 0; /* not yet started a countdown */
 reginfo->strend = strend;
 /* see how far we have to get to not match where we matched before */
 reginfo->till = stringarg + minend;

 if (prog->extflags & RXf_EVAL_SEEN && SvPADTMP(sv)) {
  /* SAVEFREESV, not sv_mortalcopy, as this SV must last until after
  S_cleanup_regmatch_info_aux has executed (registered by
  SAVEDESTRUCTOR_X below).  S_cleanup_regmatch_info_aux modifies
  magic belonging to this SV.
  Not newSVsv, either, as it does not COW.
  */
  reginfo->sv = newSV(0);
  SvSetSV_nosteal(reginfo->sv, sv);
  SAVEFREESV(reginfo->sv);
 }

 /* reserve next 2 or 3 slots in PL_regmatch_state:
 * slot N+0: may currently be in use: skip it
 * slot N+1: use for regmatch_info_aux struct
 * slot N+2: use for regmatch_info_aux_eval struct if we have (?{})'s
 * slot N+3: ready for use by regmatch()
 */

 {
  regmatch_state *old_regmatch_state;
  regmatch_slab  *old_regmatch_slab;
  int i, max = (prog->extflags & RXf_EVAL_SEEN) ? 2 : 1;

  /* on first ever match, allocate first slab */
  if (!PL_regmatch_slab) {
   Newx(PL_regmatch_slab, 1, regmatch_slab);
   PL_regmatch_slab->prev = NULL;
   PL_regmatch_slab->next = NULL;
   PL_regmatch_state = SLAB_FIRST(PL_regmatch_slab);
  }

  old_regmatch_state = PL_regmatch_state;
  old_regmatch_slab  = PL_regmatch_slab;

  for (i=0; i <= max; i++) {
   if (i == 1)
    reginfo->info_aux = &(PL_regmatch_state->u.info_aux);
   else if (i ==2)
    reginfo->info_aux_eval =
    reginfo->info_aux->info_aux_eval =
       &(PL_regmatch_state->u.info_aux_eval);

   if (++PL_regmatch_state >  SLAB_LAST(PL_regmatch_slab))
    PL_regmatch_state = S_push_slab(aTHX);
  }

  /* note initial PL_regmatch_state position; at end of match we'll
  * pop back to there and free any higher slabs */

  reginfo->info_aux->old_regmatch_state = old_regmatch_state;
  reginfo->info_aux->old_regmatch_slab  = old_regmatch_slab;
  reginfo->info_aux->poscache = NULL;

  SAVEDESTRUCTOR_X(S_cleanup_regmatch_info_aux, reginfo->info_aux);

  if ((prog->extflags & RXf_EVAL_SEEN))
   S_setup_eval_state(aTHX_ reginfo);
  else
   reginfo->info_aux_eval = reginfo->info_aux->info_aux_eval = NULL;
 }

 /* If there is a "must appear" string, look for it. */

 if (PL_curpm && (PM_GETRE(PL_curpm) == rx)) {
  /* We have to be careful. If the previous successful match
  was from this regex we don't want a subsequent partially
  successful match to clobber the old results.
  So when we detect this possibility we add a swap buffer
  to the re, and switch the buffer each match. If we fail,
  we switch it back; otherwise we leave it swapped.
  */
  swap = prog->offs;
  /* do we need a save destructor here for eval dies? */
  Newxz(prog->offs, (prog->nparens + 1), regexp_paren_pair);
  DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
   "rex=0x%"UVxf" saving  offs: orig=0x%"UVxf" new=0x%"UVxf"\n",
   PTR2UV(prog),
   PTR2UV(swap),
   PTR2UV(prog->offs)
  ));
 }

 /* Simplest case:  anchored match need be tried only once. */
 /*  [unless only anchor is MBOL - implying multiline is set] */
 if (prog->intflags & (PREGf_ANCH & ~PREGf_ANCH_GPOS)) {
  if (s == startpos && regtry(reginfo, &s))
   goto got_it;
  else if (multiline || (prog->intflags & (PREGf_IMPLICIT | PREGf_ANCH_MBOL))) /* XXXX SBOL? */
  {
   char *end;

   if (minlen)
    dontbother = minlen - 1;
   end = HOP3c(strend, -dontbother, strbeg) - 1;
   /* for multiline we only have to try after newlines */
   if (prog->check_substr || prog->check_utf8) {
    /* because of the goto we can not easily reuse the macros for bifurcating the
    unicode/non-unicode match modes here like we do elsewhere - demerphq */
    if (utf8_target) {
     if (s == startpos)
      goto after_try_utf8;
     while (1) {
      if (regtry(reginfo, &s)) {
       goto got_it;
      }
     after_try_utf8:
      if (s > end) {
       goto phooey;
      }
      if (prog->extflags & RXf_USE_INTUIT) {
       s = re_intuit_start(rx, sv, strbeg,
         s + UTF8SKIP(s), strend, flags, NULL);
       if (!s) {
        goto phooey;
       }
      }
      else {
       s += UTF8SKIP(s);
      }
     }
    } /* end search for check string in unicode */
    else {
     if (s == startpos) {
      goto after_try_latin;
     }
     while (1) {
      if (regtry(reginfo, &s)) {
       goto got_it;
      }
     after_try_latin:
      if (s > end) {
       goto phooey;
      }
      if (prog->extflags & RXf_USE_INTUIT) {
       s = re_intuit_start(rx, sv, strbeg,
          s + 1, strend, flags, NULL);
       if (!s) {
        goto phooey;
       }
      }
      else {
       s++;
      }
     }
    } /* end search for check string in latin*/
   } /* end search for check string */
   else { /* search for newline */
    if (s > startpos) {
     /*XXX: The s-- is almost definitely wrong here under unicode - demeprhq*/
     s--;
    }
    /* We can use a more efficient search as newlines are the same in unicode as they are in latin */
    while (s <= end) { /* note it could be possible to match at the end of the string */
     if (*s++ == '\n') { /* don't need PL_utf8skip here */
      if (regtry(reginfo, &s))
       goto got_it;
     }
    }
   } /* end search for newline */
  } /* end anchored/multiline check string search */
  goto phooey;
 } else if (prog->intflags & PREGf_ANCH_GPOS)
 {
  /* PREGf_ANCH_GPOS should never be true if PREGf_GPOS_SEEN is not true */
  assert(prog->intflags & PREGf_GPOS_SEEN);
  /* For anchored \G, the only position it can match from is
  * (ganch-gofs); we already set startpos to this above; if intuit
  * moved us on from there, we can't possibly succeed */
  assert(startpos == reginfo->ganch - prog->gofs);
  if (s == startpos && regtry(reginfo, &s))
   goto got_it;
  goto phooey;
 }

 /* Messy cases:  unanchored match. */
 if ((prog->anchored_substr || prog->anchored_utf8) && prog->intflags & PREGf_SKIP) {
  /* we have /x+whatever/ */
  /* it must be a one character string (XXXX Except is_utf8_pat?) */
  char ch;
#ifdef DEBUGGING
  int did_match = 0;
#endif
  if (utf8_target) {
   if (! prog->anchored_utf8) {
    to_utf8_substr(prog);
   }
   ch = SvPVX_const(prog->anchored_utf8)[0];
   REXEC_FBC_SCAN(
    if (*s == ch) {
     DEBUG_EXECUTE_r( did_match = 1 );
     if (regtry(reginfo, &s)) goto got_it;
     s += UTF8SKIP(s);
     while (s < strend && *s == ch)
      s += UTF8SKIP(s);
    }
   );

  }
  else {
   if (! prog->anchored_substr) {
    if (! to_byte_substr(prog)) {
     NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
    }
   }
   ch = SvPVX_const(prog->anchored_substr)[0];
   REXEC_FBC_SCAN(
    if (*s == ch) {
     DEBUG_EXECUTE_r( did_match = 1 );
     if (regtry(reginfo, &s)) goto got_it;
     s++;
     while (s < strend && *s == ch)
      s++;
    }
   );
  }
  DEBUG_EXECUTE_r(if (!did_match)
    PerlIO_printf(Perl_debug_log,
        "Did not find anchored character...\n")
   );
 }
 else if (prog->anchored_substr != NULL
   || prog->anchored_utf8 != NULL
   || ((prog->float_substr != NULL || prog->float_utf8 != NULL)
    && prog->float_max_offset < strend - s)) {
  SV *must;
  SSize_t back_max;
  SSize_t back_min;
  char *last;
  char *last1;  /* Last position checked before */
#ifdef DEBUGGING
  int did_match = 0;
#endif
  if (prog->anchored_substr || prog->anchored_utf8) {
   if (utf8_target) {
    if (! prog->anchored_utf8) {
     to_utf8_substr(prog);
    }
    must = prog->anchored_utf8;
   }
   else {
    if (! prog->anchored_substr) {
     if (! to_byte_substr(prog)) {
      NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
     }
    }
    must = prog->anchored_substr;
   }
   back_max = back_min = prog->anchored_offset;
  } else {
   if (utf8_target) {
    if (! prog->float_utf8) {
     to_utf8_substr(prog);
    }
    must = prog->float_utf8;
   }
   else {
    if (! prog->float_substr) {
     if (! to_byte_substr(prog)) {
      NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
     }
    }
    must = prog->float_substr;
   }
   back_max = prog->float_max_offset;
   back_min = prog->float_min_offset;
  }

  if (back_min<0) {
   last = strend;
  } else {
   last = HOP3c(strend, /* Cannot start after this */
    -(SSize_t)(CHR_SVLEN(must)
      - (SvTAIL(must) != 0) + back_min), strbeg);
  }
  if (s > reginfo->strbeg)
   last1 = HOPc(s, -1);
  else
   last1 = s - 1; /* bogus */

  /* XXXX check_substr already used to find "s", can optimize if
  check_substr==must. */
  dontbother = 0;
  strend = HOPc(strend, -dontbother);
  while ( (s <= last) &&
    (s = fbm_instr((unsigned char*)HOP4c(s, back_min, strbeg,  strend),
        (unsigned char*)strend, must,
        multiline ? FBMrf_MULTILINE : 0)) ) {
   DEBUG_EXECUTE_r( did_match = 1 );
   if (HOPc(s, -back_max) > last1) {
    last1 = HOPc(s, -back_min);
    s = HOPc(s, -back_max);
   }
   else {
    char * const t = (last1 >= reginfo->strbeg)
         ? HOPc(last1, 1) : last1 + 1;

    last1 = HOPc(s, -back_min);
    s = t;
   }
   if (utf8_target) {
    while (s <= last1) {
     if (regtry(reginfo, &s))
      goto got_it;
     if (s >= last1) {
      s++; /* to break out of outer loop */
      break;
     }
     s += UTF8SKIP(s);
    }
   }
   else {
    while (s <= last1) {
     if (regtry(reginfo, &s))
      goto got_it;
     s++;
    }
   }
  }
  DEBUG_EXECUTE_r(if (!did_match) {
   RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
    SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
   PerlIO_printf(Perl_debug_log, "Did not find %s substr %s%s...\n",
       ((must == prog->anchored_substr || must == prog->anchored_utf8)
       ? "anchored" : "floating"),
    quoted, RE_SV_TAIL(must));
  });
  goto phooey;
 }
 else if ( (c = progi->regstclass) ) {
  if (minlen) {
   const OPCODE op = OP(progi->regstclass);
   /* don't bother with what can't match */
   if (PL_regkind[op] != EXACT && op != CANY && PL_regkind[op] != TRIE)
    strend = HOPc(strend, -(minlen - 1));
  }
  DEBUG_EXECUTE_r({
   SV * const prop = sv_newmortal();
   regprop(prog, prop, c, reginfo);
   {
    RE_PV_QUOTED_DECL(quoted,utf8_target,PERL_DEBUG_PAD_ZERO(1),
     s,strend-s,60);
    PerlIO_printf(Perl_debug_log,
     "Matching stclass %.*s against %s (%d bytes)\n",
     (int)SvCUR(prop), SvPVX_const(prop),
     quoted, (int)(strend - s));
   }
  });
  if (find_byclass(prog, c, s, strend, reginfo))
   goto got_it;
  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Contradicts stclass... [regexec_flags]\n"));
 }
 else {
  dontbother = 0;
  if (prog->float_substr != NULL || prog->float_utf8 != NULL) {
   /* Trim the end. */
   char *last= NULL;
   SV* float_real;
   STRLEN len;
   const char *little;

   if (utf8_target) {
    if (! prog->float_utf8) {
     to_utf8_substr(prog);
    }
    float_real = prog->float_utf8;
   }
   else {
    if (! prog->float_substr) {
     if (! to_byte_substr(prog)) {
      NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
     }
    }
    float_real = prog->float_substr;
   }

   little = SvPV_const(float_real, len);
   if (SvTAIL(float_real)) {
     /* This means that float_real contains an artificial \n on
     * the end due to the presence of something like this:
     * /foo$/ where we can match both "foo" and "foo\n" at the
     * end of the string.  So we have to compare the end of the
     * string first against the float_real without the \n and
     * then against the full float_real with the string.  We
     * have to watch out for cases where the string might be
     * smaller than the float_real or the float_real without
     * the \n. */
     char *checkpos= strend - len;
     DEBUG_OPTIMISE_r(
      PerlIO_printf(Perl_debug_log,
       "%sChecking for float_real.%s\n",
       PL_colors[4], PL_colors[5]));
     if (checkpos + 1 < strbeg) {
      /* can't match, even if we remove the trailing \n
      * string is too short to match */
      DEBUG_EXECUTE_r(
       PerlIO_printf(Perl_debug_log,
        "%sString shorter than required trailing substring, cannot match.%s\n",
        PL_colors[4], PL_colors[5]));
      goto phooey;
     } else if (memEQ(checkpos + 1, little, len - 1)) {
      /* can match, the end of the string matches without the
      * "\n" */
      last = checkpos + 1;
     } else if (checkpos < strbeg) {
      /* cant match, string is too short when the "\n" is
      * included */
      DEBUG_EXECUTE_r(
       PerlIO_printf(Perl_debug_log,
        "%sString does not contain required trailing substring, cannot match.%s\n",
        PL_colors[4], PL_colors[5]));
      goto phooey;
     } else if (!multiline) {
      /* non multiline match, so compare with the "\n" at the
      * end of the string */
      if (memEQ(checkpos, little, len)) {
       last= checkpos;
      } else {
       DEBUG_EXECUTE_r(
        PerlIO_printf(Perl_debug_log,
         "%sString does not contain required trailing substring, cannot match.%s\n",
         PL_colors[4], PL_colors[5]));
       goto phooey;
      }
     } else {
      /* multiline match, so we have to search for a place
      * where the full string is located */
      goto find_last;
     }
   } else {
    find_last:
     if (len)
      last = rninstr(s, strend, little, little + len);
     else
      last = strend; /* matching "$" */
   }
   if (!last) {
    /* at one point this block contained a comment which was
    * probably incorrect, which said that this was a "should not
    * happen" case.  Even if it was true when it was written I am
    * pretty sure it is not anymore, so I have removed the comment
    * and replaced it with this one. Yves */
    DEBUG_EXECUTE_r(
     PerlIO_printf(Perl_debug_log,
      "String does not contain required substring, cannot match.\n"
     ));
    goto phooey;
   }
   dontbother = strend - last + prog->float_min_offset;
  }
  if (minlen && (dontbother < minlen))
   dontbother = minlen - 1;
  strend -= dontbother;      /* this one's always in bytes! */
  /* We don't know much -- general case. */
  if (utf8_target) {
   for (;;) {
    if (regtry(reginfo, &s))
     goto got_it;
    if (s >= strend)
     break;
    s += UTF8SKIP(s);
   };
  }
  else {
   do {
    if (regtry(reginfo, &s))
     goto got_it;
   } while (s++ < strend);
  }
 }

 /* Failure. */
 goto phooey;

got_it:
 /* s/// doesn't like it if $& is earlier than where we asked it to
 * start searching (which can happen on something like /.\G/) */
 if (       (flags & REXEC_FAIL_ON_UNDERFLOW)
   && (prog->offs[0].start < stringarg - strbeg))
 {
  /* this should only be possible under \G */
  assert(prog->intflags & PREGf_GPOS_SEEN);
  DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
   "matched, but failing for REXEC_FAIL_ON_UNDERFLOW\n"));
  goto phooey;
 }

 DEBUG_BUFFERS_r(
  if (swap)
   PerlIO_printf(Perl_debug_log,
    "rex=0x%"UVxf" freeing offs: 0x%"UVxf"\n",
    PTR2UV(prog),
    PTR2UV(swap)
   );
 );
 Safefree(swap);

 /* clean up; this will trigger destructors that will free all slabs
 * above the current one, and cleanup the regmatch_info_aux
 * and regmatch_info_aux_eval sructs */

 LEAVE_SCOPE(oldsave);

 if (RXp_PAREN_NAMES(prog))
  (void)hv_iterinit(RXp_PAREN_NAMES(prog));

 RX_MATCH_UTF8_set(rx, utf8_target);

 /* make sure $`, $&, $', and $digit will work later */
 if ( !(flags & REXEC_NOT_FIRST) )
  S_reg_set_capture_string(aTHX_ rx,
         strbeg, reginfo->strend,
         sv, flags, utf8_target);

 return 1;

phooey:
 DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch failed%s\n",
      PL_colors[4], PL_colors[5]));

 /* clean up; this will trigger destructors that will free all slabs
 * above the current one, and cleanup the regmatch_info_aux
 * and regmatch_info_aux_eval sructs */

 LEAVE_SCOPE(oldsave);

 if (swap) {
  /* we failed :-( roll it back */
  DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
   "rex=0x%"UVxf" rolling back offs: freeing=0x%"UVxf" restoring=0x%"UVxf"\n",
   PTR2UV(prog),
   PTR2UV(prog->offs),
   PTR2UV(swap)
  ));
  Safefree(prog->offs);
  prog->offs = swap;
 }
 return 0;
}


/* Set which rex is pointed to by PL_reg_curpm, handling ref counting.
 * Do inc before dec, in case old and new rex are the same */
#define SET_reg_curpm(Re2)                          \
 if (reginfo->info_aux_eval) {                   \
  (void)ReREFCNT_inc(Re2);      \
  ReREFCNT_dec(PM_GETRE(PL_reg_curpm));     \
  PM_SETRE((PL_reg_curpm), (Re2));     \
 }


/*
 - regtry - try match at specific point
 */
STATIC I32   /* 0 failure, 1 success */
S_regtry(pTHX_ regmatch_info *reginfo, char **startposp)
{
 CHECKPOINT lastcp;
 REGEXP *const rx = reginfo->prog;
 regexp *const prog = ReANY(rx);
 SSize_t result;
 RXi_GET_DECL(prog,progi);
 GET_RE_DEBUG_FLAGS_DECL;

 PERL_ARGS_ASSERT_REGTRY;

 reginfo->cutpoint=NULL;

 prog->offs[0].start = *startposp - reginfo->strbeg;
 prog->lastparen = 0;
 prog->lastcloseparen = 0;

 /* XXXX What this code is doing here?!!!  There should be no need
 to do this again and again, prog->lastparen should take care of
 this!  --ilya*/

 /* Tests pat.t#187 and split.t#{13,14} seem to depend on this code.
 * Actually, the code in regcppop() (which Ilya may be meaning by
 * prog->lastparen), is not needed at all by the test suite
 * (op/regexp, op/pat, op/split), but that code is needed otherwise
 * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
 * Meanwhile, this code *is* needed for the
 * above-mentioned test suite tests to succeed.  The common theme
 * on those tests seems to be returning null fields from matches.
 * --jhi updated by dapm */
#if 1
 if (prog->nparens) {
  regexp_paren_pair *pp = prog->offs;
  I32 i;
  for (i = prog->nparens; i > (I32)prog->lastparen; i--) {
   ++pp;
   pp->start = -1;
   pp->end = -1;
  }
 }
#endif
 REGCP_SET(lastcp);
 result = regmatch(reginfo, *startposp, progi->program + 1);
 if (result != -1) {
  prog->offs[0].end = result;
  return 1;
 }
 if (reginfo->cutpoint)
  *startposp= reginfo->cutpoint;
 REGCP_UNWIND(lastcp);
 return 0;
}


#define sayYES goto yes
#define sayNO goto no
#define sayNO_SILENT goto no_silent

/* we dont use STMT_START/END here because it leads to
   "unreachable code" warnings, which are bogus, but distracting. */
#define CACHEsayNO \
 if (ST.cache_mask) \
 reginfo->info_aux->poscache[ST.cache_offset] |= ST.cache_mask; \
 sayNO

/* this is used to determine how far from the left messages like
   'failed...' are printed. It should be set such that messages
   are inline with the regop output that created them.
*/
#define REPORT_CODE_OFF 32


#define CHRTEST_UNINIT -1001 /* c1/c2 haven't been calculated yet */
#define CHRTEST_VOID   -1000 /* the c1/c2 "next char" test should be skipped */
#define CHRTEST_NOT_A_CP_1 -999
#define CHRTEST_NOT_A_CP_2 -998

/* grab a new slab and return the first slot in it */

STATIC regmatch_state *
S_push_slab(pTHX)
{
#if PERL_VERSION < 9 && !defined(PERL_CORE)
 dMY_CXT;
#endif
 regmatch_slab *s = PL_regmatch_slab->next;
 if (!s) {
  Newx(s, 1, regmatch_slab);
  s->prev = PL_regmatch_slab;
  s->next = NULL;
  PL_regmatch_slab->next = s;
 }
 PL_regmatch_slab = s;
 return SLAB_FIRST(s);
}


/* push a new state then goto it */

#define PUSH_STATE_GOTO(state, node, input) \
 pushinput = input; \
 scan = node; \
 st->resume_state = state; \
 goto push_state;

/* push a new state with success backtracking, then goto it */

#define PUSH_YES_STATE_GOTO(state, node, input) \
 pushinput = input; \
 scan = node; \
 st->resume_state = state; \
 goto push_yes_state;




/*

regmatch() - main matching routine

This is basically one big switch statement in a loop. We execute an op,
set 'next' to point the next op, and continue. If we come to a point which
we may need to backtrack to on failure such as (A|B|C), we push a
backtrack state onto the backtrack stack. On failure, we pop the top
state, and re-enter the loop at the state indicated. If there are no more
states to pop, we return failure.

Sometimes we also need to backtrack on success; for example /A+/, where
after successfully matching one A, we need to go back and try to
match another one; similarly for lookahead assertions: if the assertion
completes successfully, we backtrack to the state just before the assertion
and then carry on.  In these cases, the pushed state is marked as
'backtrack on success too'. This marking is in fact done by a chain of
pointers, each pointing to the previous 'yes' state. On success, we pop to
the nearest yes state, discarding any intermediate failure-only states.
Sometimes a yes state is pushed just to force some cleanup code to be
called at the end of a successful match or submatch; e.g. (??{$re}) uses
it to free the inner regex.

Note that failure backtracking rewinds the cursor position, while
success backtracking leaves it alone.

A pattern is complete when the END op is executed, while a subpattern
such as (?=foo) is complete when the SUCCESS op is executed. Both of these
ops trigger the "pop to last yes state if any, otherwise return true"
behaviour.

A common convention in this function is to use A and B to refer to the two
subpatterns (or to the first nodes thereof) in patterns like /A*B/: so A is
the subpattern to be matched possibly multiple times, while B is the entire
rest of the pattern. Variable and state names reflect this convention.

The states in the main switch are the union of ops and failure/success of
substates associated with with that op.  For example, IFMATCH is the op
that does lookahead assertions /(?=A)B/ and so the IFMATCH state means
'execute IFMATCH'; while IFMATCH_A is a state saying that we have just
successfully matched A and IFMATCH_A_fail is a state saying that we have
just failed to match A. Resume states always come in pairs. The backtrack
state we push is marked as 'IFMATCH_A', but when that is popped, we resume
at IFMATCH_A or IFMATCH_A_fail, depending on whether we are backtracking
on success or failure.

The struct that holds a backtracking state is actually a big union, with
one variant for each major type of op. The variable st points to the
top-most backtrack struct. To make the code clearer, within each
block of code we #define ST to alias the relevant union.

Here's a concrete example of a (vastly oversimplified) IFMATCH
implementation:

 switch (state) {
 ....

#define ST st->u.ifmatch

 case IFMATCH: // we are executing the IFMATCH op, (?=A)B
  ST.foo = ...; // some state we wish to save
  ...
  // push a yes backtrack state with a resume value of
  // IFMATCH_A/IFMATCH_A_fail, then continue execution at the
  // first node of A:
  PUSH_YES_STATE_GOTO(IFMATCH_A, A, newinput);
  // NOTREACHED

 case IFMATCH_A: // we have successfully executed A; now continue with B
  next = B;
  bar = ST.foo; // do something with the preserved value
  break;

 case IFMATCH_A_fail: // A failed, so the assertion failed
  ...;   // do some housekeeping, then ...
  sayNO; // propagate the failure

#undef ST

 ...
 }

For any old-timers reading this who are familiar with the old recursive
approach, the code above is equivalent to:

 case IFMATCH: // we are executing the IFMATCH op, (?=A)B
 {
  int foo = ...
  ...
  if (regmatch(A)) {
   next = B;
   bar = foo;
   break;
  }
  ...;   // do some housekeeping, then ...
  sayNO; // propagate the failure
 }

The topmost backtrack state, pointed to by st, is usually free. If you
want to claim it, populate any ST.foo fields in it with values you wish to
save, then do one of

  PUSH_STATE_GOTO(resume_state, node, newinput);
  PUSH_YES_STATE_GOTO(resume_state, node, newinput);

which sets that backtrack state's resume value to 'resume_state', pushes a
new free entry to the top of the backtrack stack, then goes to 'node'.
On backtracking, the free slot is popped, and the saved state becomes the
new free state. An ST.foo field in this new top state can be temporarily
accessed to retrieve values, but once the main loop is re-entered, it
becomes available for reuse.

Note that the depth of the backtrack stack constantly increases during the
left-to-right execution of the pattern, rather than going up and down with
the pattern nesting. For example the stack is at its maximum at Z at the
end of the pattern, rather than at X in the following:

 /(((X)+)+)+....(Y)+....Z/

The only exceptions to this are lookahead/behind assertions and the cut,
(?>A), which pop all the backtrack states associated with A before
continuing.

Backtrack state structs are allocated in slabs of about 4K in size.
PL_regmatch_state and st always point to the currently active state,
and PL_regmatch_slab points to the slab currently containing
PL_regmatch_state.  The first time regmatch() is called, the first slab is
allocated, and is never freed until interpreter destruction. When the slab
is full, a new one is allocated and chained to the end. At exit from
regmatch(), slabs allocated since entry are freed.

*/


#define DEBUG_STATE_pp(pp)        \
 DEBUG_STATE_r({         \
  DUMP_EXEC_POS(locinput, scan, utf8_target);         \
  PerlIO_printf(Perl_debug_log,       \
   "    %*s"pp" %s%s%s%s%s\n",       \
   depth*2, "",        \
   PL_reg_name[st->resume_state],                  \
   ((st==yes_state||st==mark_state) ? "[" : ""),   \
   ((st==yes_state) ? "Y" : ""),                   \
   ((st==mark_state) ? "M" : ""),                  \
   ((st==yes_state||st==mark_state) ? "]" : "")    \
  );                                                  \
 });


#define REG_NODE_NUM(x) ((x) ? (int)((x)-prog) : -1)

#ifdef DEBUGGING

STATIC void
S_debug_start_match(pTHX_ const REGEXP *prog, const bool utf8_target,
 const char *start, const char *end, const char *blurb)
{
 const bool utf8_pat = RX_UTF8(prog) ? 1 : 0;

 PERL_ARGS_ASSERT_DEBUG_START_MATCH;

 if (!PL_colorset)
   reginitcolors();
 {
  RE_PV_QUOTED_DECL(s0, utf8_pat, PERL_DEBUG_PAD_ZERO(0),
   RX_PRECOMP_const(prog), RX_PRELEN(prog), 60);

  RE_PV_QUOTED_DECL(s1, utf8_target, PERL_DEBUG_PAD_ZERO(1),
   start, end - start, 60);

  PerlIO_printf(Perl_debug_log,
   "%s%s REx%s %s against %s\n",
     PL_colors[4], blurb, PL_colors[5], s0, s1);

  if (utf8_target||utf8_pat)
   PerlIO_printf(Perl_debug_log, "UTF-8 %s%s%s...\n",
    utf8_pat ? "pattern" : "",
    utf8_pat && utf8_target ? " and " : "",
    utf8_target ? "string" : ""
   );
 }
}

STATIC void
S_dump_exec_pos(pTHX_ const char *locinput,
     const regnode *scan,
     const char *loc_regeol,
     const char *loc_bostr,
     const char *loc_reg_starttry,
     const bool utf8_target)
{
 const int docolor = *PL_colors[0] || *PL_colors[2] || *PL_colors[4];
 const int taill = (docolor ? 10 : 7); /* 3 chars for "> <" */
 int l = (loc_regeol - locinput) > taill ? taill : (loc_regeol - locinput);
 /* The part of the string before starttry has one color
 (pref0_len chars), between starttry and current
 position another one (pref_len - pref0_len chars),
 after the current position the third one.
 We assume that pref0_len <= pref_len, otherwise we
 decrease pref0_len.  */
 int pref_len = (locinput - loc_bostr) > (5 + taill) - l
  ? (5 + taill) - l : locinput - loc_bostr;
 int pref0_len;

 PERL_ARGS_ASSERT_DUMP_EXEC_POS;

 while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput - pref_len)))
  pref_len++;
 pref0_len = pref_len  - (locinput - loc_reg_starttry);
 if (l + pref_len < (5 + taill) && l < loc_regeol - locinput)
  l = ( loc_regeol - locinput > (5 + taill) - pref_len
   ? (5 + taill) - pref_len : loc_regeol - locinput);
 while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput + l)))
  l--;
 if (pref0_len < 0)
  pref0_len = 0;
 if (pref0_len > pref_len)
  pref0_len = pref_len;
 {
  const int is_uni = (utf8_target && OP(scan) != CANY) ? 1 : 0;

  RE_PV_COLOR_DECL(s0,len0,is_uni,PERL_DEBUG_PAD(0),
   (locinput - pref_len),pref0_len, 60, 4, 5);

  RE_PV_COLOR_DECL(s1,len1,is_uni,PERL_DEBUG_PAD(1),
     (locinput - pref_len + pref0_len),
     pref_len - pref0_len, 60, 2, 3);

  RE_PV_COLOR_DECL(s2,len2,is_uni,PERL_DEBUG_PAD(2),
     locinput, loc_regeol - locinput, 10, 0, 1);

  const STRLEN tlen=len0+len1+len2;
  PerlIO_printf(Perl_debug_log,
     "%4"IVdf" <%.*s%.*s%s%.*s>%*s|",
     (IV)(locinput - loc_bostr),
     len0, s0,
     len1, s1,
     (docolor ? "" : "> <"),
     len2, s2,
     (int)(tlen > 19 ? 0 :  19 - tlen),
     "");
 }
}

#endif

/* reg_check_named_buff_matched()
 * Checks to see if a named buffer has matched. The data array of
 * buffer numbers corresponding to the buffer is expected to reside
 * in the regexp->data->data array in the slot stored in the ARG() of
 * node involved. Note that this routine doesn't actually care about the
 * name, that information is not preserved from compilation to execution.
 * Returns the index of the leftmost defined buffer with the given name
 * or 0 if non of the buffers matched.
 */
STATIC I32
S_reg_check_named_buff_matched(const regexp *rex, const regnode *scan)
{
 I32 n;
 RXi_GET_DECL(rex,rexi);
 SV *sv_dat= MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
 I32 *nums=(I32*)SvPVX(sv_dat);

 PERL_ARGS_ASSERT_REG_CHECK_NAMED_BUFF_MATCHED;

 for ( n=0; n<SvIVX(sv_dat); n++ ) {
  if ((I32)rex->lastparen >= nums[n] &&
   rex->offs[nums[n]].end != -1)
  {
   return nums[n];
  }
 }
 return 0;
}


static bool
S_setup_EXACTISH_ST_c1_c2(pTHX_ const regnode * const text_node, int *c1p,
  U8* c1_utf8, int *c2p, U8* c2_utf8, regmatch_info *reginfo)
{
 /* This function determines if there are one or two characters that match
 * the first character of the passed-in EXACTish node <text_node>, and if
 * so, returns them in the passed-in pointers.
 *
 * If it determines that no possible character in the target string can
 * match, it returns FALSE; otherwise TRUE.  (The FALSE situation occurs if
 * the first character in <text_node> requires UTF-8 to represent, and the
 * target string isn't in UTF-8.)
 *
 * If there are more than two characters that could match the beginning of
 * <text_node>, or if more context is required to determine a match or not,
 * it sets both *<c1p> and *<c2p> to CHRTEST_VOID.
 *
 * The motiviation behind this function is to allow the caller to set up
 * tight loops for matching.  If <text_node> is of type EXACT, there is
 * only one possible character that can match its first character, and so
 * the situation is quite simple.  But things get much more complicated if
 * folding is involved.  It may be that the first character of an EXACTFish
 * node doesn't participate in any possible fold, e.g., punctuation, so it
 * can be matched only by itself.  The vast majority of characters that are
 * in folds match just two things, their lower and upper-case equivalents.
 * But not all are like that; some have multiple possible matches, or match
 * sequences of more than one character.  This function sorts all that out.
 *
 * Consider the patterns A*B or A*?B where A and B are arbitrary.  In a
 * loop of trying to match A*, we know we can't exit where the thing
 * following it isn't a B.  And something can't be a B unless it is the
 * beginning of B.  By putting a quick test for that beginning in a tight
 * loop, we can rule out things that can't possibly be B without having to
 * break out of the loop, thus avoiding work.  Similarly, if A is a single
 * character, we can make a tight loop matching A*, using the outputs of
 * this function.
 *
 * If the target string to match isn't in UTF-8, and there aren't
 * complications which require CHRTEST_VOID, *<c1p> and *<c2p> are set to
 * the one or two possible octets (which are characters in this situation)
 * that can match.  In all cases, if there is only one character that can
 * match, *<c1p> and *<c2p> will be identical.
 *
 * If the target string is in UTF-8, the buffers pointed to by <c1_utf8>
 * and <c2_utf8> will contain the one or two UTF-8 sequences of bytes that
 * can match the beginning of <text_node>.  They should be declared with at
 * least length UTF8_MAXBYTES+1.  (If the target string isn't in UTF-8, it is
 * undefined what these contain.)  If one or both of the buffers are
 * invariant under UTF-8, *<c1p>, and *<c2p> will also be set to the
 * corresponding invariant.  If variant, the corresponding *<c1p> and/or
 * *<c2p> will be set to a negative number(s) that shouldn't match any code
 * point (unless inappropriately coerced to unsigned).   *<c1p> will equal
 * *<c2p> if and only if <c1_utf8> and <c2_utf8> are the same. */

 const bool utf8_target = reginfo->is_utf8_target;

 UV c1 = (UV)CHRTEST_NOT_A_CP_1;
 UV c2 = (UV)CHRTEST_NOT_A_CP_2;
 bool use_chrtest_void = FALSE;
 const bool is_utf8_pat = reginfo->is_utf8_pat;

 /* Used when we have both utf8 input and utf8 output, to avoid converting
 * to/from code points */
 bool utf8_has_been_setup = FALSE;

 dVAR;

 U8 *pat = (U8*)STRING(text_node);
 U8 folded[UTF8_MAX_FOLD_CHAR_EXPAND * UTF8_MAXBYTES_CASE + 1] = { '\0' };

 if (OP(text_node) == EXACT) {

  /* In an exact node, only one thing can be matched, that first
  * character.  If both the pat and the target are UTF-8, we can just
  * copy the input to the output, avoiding finding the code point of
  * that character */
  if (!is_utf8_pat) {
   c2 = c1 = *pat;
  }
  else if (utf8_target) {
   Copy(pat, c1_utf8, UTF8SKIP(pat), U8);
   Copy(pat, c2_utf8, UTF8SKIP(pat), U8);
   utf8_has_been_setup = TRUE;
  }
  else {
   c2 = c1 = valid_utf8_to_uvchr(pat, NULL);
  }
 }
 else { /* an EXACTFish node */
  U8 *pat_end = pat + STR_LEN(text_node);

  /* An EXACTFL node has at least some characters unfolded, because what
  * they match is not known until now.  So, now is the time to fold
  * the first few of them, as many as are needed to determine 'c1' and
  * 'c2' later in the routine.  If the pattern isn't UTF-8, we only need
  * to fold if in a UTF-8 locale, and then only the Sharp S; everything
  * else is 1-1 and isn't assumed to be folded.  In a UTF-8 pattern, we
  * need to fold as many characters as a single character can fold to,
  * so that later we can check if the first ones are such a multi-char
  * fold.  But, in such a pattern only locale-problematic characters
  * aren't folded, so we can skip this completely if the first character
  * in the node isn't one of the tricky ones */
  if (OP(text_node) == EXACTFL) {

   if (! is_utf8_pat) {
    if (IN_UTF8_CTYPE_LOCALE && *pat == LATIN_SMALL_LETTER_SHARP_S)
    {
     folded[0] = folded[1] = 's';
     pat = folded;
     pat_end = folded + 2;
    }
   }
   else if (is_PROBLEMATIC_LOCALE_FOLDEDS_START_utf8(pat)) {
    U8 *s = pat;
    U8 *d = folded;
    int i;

    for (i = 0; i < UTF8_MAX_FOLD_CHAR_EXPAND && s < pat_end; i++) {
     if (isASCII(*s)) {
      *(d++) = (U8) toFOLD_LC(*s);
      s++;
     }
     else {
      STRLEN len;
      _to_utf8_fold_flags(s,
           d,
           &len,
           FOLD_FLAGS_FULL | FOLD_FLAGS_LOCALE);
      d += len;
      s += UTF8SKIP(s);
     }
    }

    pat = folded;
    pat_end = d;
   }
  }

  if ((is_utf8_pat && is_MULTI_CHAR_FOLD_utf8_safe(pat, pat_end))
   || (!is_utf8_pat && is_MULTI_CHAR_FOLD_latin1_safe(pat, pat_end)))
  {
   /* Multi-character folds require more context to sort out.  Also
   * PL_utf8_foldclosures used below doesn't handle them, so have to
   * be handled outside this routine */
   use_chrtest_void = TRUE;
  }
  else { /* an EXACTFish node which doesn't begin with a multi-char fold */
   c1 = is_utf8_pat ? valid_utf8_to_uvchr(pat, NULL) : *pat;
   if (c1 > 255) {
    /* Load the folds hash, if not already done */
    SV** listp;
    if (! PL_utf8_foldclosures) {
     _load_PL_utf8_foldclosures();
    }

    /* The fold closures data structure is a hash with the keys
    * being the UTF-8 of every character that is folded to, like
    * 'k', and the values each an array of all code points that
    * fold to its key.  e.g. [ 'k', 'K', KELVIN_SIGN ].
    * Multi-character folds are not included */
    if ((! (listp = hv_fetch(PL_utf8_foldclosures,
          (char *) pat,
          UTF8SKIP(pat),
          FALSE))))
    {
     /* Not found in the hash, therefore there are no folds
     * containing it, so there is only a single character that
     * could match */
     c2 = c1;
    }
    else {  /* Does participate in folds */
     AV* list = (AV*) *listp;
     if (av_tindex(list) != 1) {

      /* If there aren't exactly two folds to this, it is
      * outside the scope of this function */
      use_chrtest_void = TRUE;
     }
     else {  /* There are two.  Get them */
      SV** c_p = av_fetch(list, 0, FALSE);
      if (c_p == NULL) {
       Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
      }
      c1 = SvUV(*c_p);

      c_p = av_fetch(list, 1, FALSE);
      if (c_p == NULL) {
       Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
      }
      c2 = SvUV(*c_p);

      /* Folds that cross the 255/256 boundary are forbidden
      * if EXACTFL (and isnt a UTF8 locale), or EXACTFA and
      * one is ASCIII.  Since the pattern character is above
      * 255, and its only other match is below 256, the only
      * legal match will be to itself.  We have thrown away
      * the original, so have to compute which is the one
      * above 255. */
      if ((c1 < 256) != (c2 < 256)) {
       if ((OP(text_node) == EXACTFL
        && ! IN_UTF8_CTYPE_LOCALE)
        || ((OP(text_node) == EXACTFA
         || OP(text_node) == EXACTFA_NO_TRIE)
         && (isASCII(c1) || isASCII(c2))))
       {
        if (c1 < 256) {
         c1 = c2;
        }
        else {
         c2 = c1;
        }
       }
      }
     }
    }
   }
   else /* Here, c1 is <= 255 */
    if (utf8_target
     && HAS_NONLATIN1_FOLD_CLOSURE(c1)
     && ( ! (OP(text_node) == EXACTFL && ! IN_UTF8_CTYPE_LOCALE))
     && ((OP(text_node) != EXACTFA
      && OP(text_node) != EXACTFA_NO_TRIE)
      || ! isASCII(c1)))
   {
    /* Here, there could be something above Latin1 in the target
    * which folds to this character in the pattern.  All such
    * cases except LATIN SMALL LETTER Y WITH DIAERESIS have more
    * than two characters involved in their folds, so are outside
    * the scope of this function */
    if (UNLIKELY(c1 == LATIN_SMALL_LETTER_Y_WITH_DIAERESIS)) {
     c2 = LATIN_CAPITAL_LETTER_Y_WITH_DIAERESIS;
    }
    else {
     use_chrtest_void = TRUE;
    }
   }
   else { /* Here nothing above Latin1 can fold to the pattern
     character */
    switch (OP(text_node)) {

     case EXACTFL:   /* /l rules */
      c2 = PL_fold_locale[c1];
      break;

     case EXACTF:   /* This node only generated for non-utf8
         patterns */
      assert(! is_utf8_pat);
      if (! utf8_target) {    /* /d rules */
       c2 = PL_fold[c1];
       break;
      }
      /* FALLTHROUGH */
      /* /u rules for all these.  This happens to work for
      * EXACTFA as nothing in Latin1 folds to ASCII */
     case EXACTFA_NO_TRIE:   /* This node only generated for
           non-utf8 patterns */
      assert(! is_utf8_pat);
      /* FALLTHROUGH */
     case EXACTFA:
     case EXACTFU_SS:
     case EXACTFU:
      c2 = PL_fold_latin1[c1];
      break;

     default:
      Perl_croak(aTHX_ "panic: Unexpected op %u", OP(text_node));
      assert(0); /* NOTREACHED */
    }
   }
  }
 }

 /* Here have figured things out.  Set up the returns */
 if (use_chrtest_void) {
  *c2p = *c1p = CHRTEST_VOID;
 }
 else if (utf8_target) {
  if (! utf8_has_been_setup) {    /* Don't have the utf8; must get it */
   uvchr_to_utf8(c1_utf8, c1);
   uvchr_to_utf8(c2_utf8, c2);
  }

  /* Invariants are stored in both the utf8 and byte outputs; Use
  * negative numbers otherwise for the byte ones.  Make sure that the
  * byte ones are the same iff the utf8 ones are the same */
  *c1p = (UTF8_IS_INVARIANT(*c1_utf8)) ? *c1_utf8 : CHRTEST_NOT_A_CP_1;
  *c2p = (UTF8_IS_INVARIANT(*c2_utf8))
    ? *c2_utf8
    : (c1 == c2)
    ? CHRTEST_NOT_A_CP_1
    : CHRTEST_NOT_A_CP_2;
 }
 else if (c1 > 255) {
 if (c2 > 255) {  /* both possibilities are above what a non-utf8 string
      can represent */
  return FALSE;
 }

 *c1p = *c2p = c2;    /* c2 is the only representable value */
 }
 else {  /* c1 is representable; see about c2 */
 *c1p = c1;
 *c2p = (c2 < 256) ? c2 : c1;
 }

 return TRUE;
}

/* returns -1 on failure, $+[0] on success */
STATIC SSize_t
S_regmatch(pTHX_ regmatch_info *reginfo, char *startpos, regnode *prog)
{
#if PERL_VERSION < 9 && !defined(PERL_CORE)
 dMY_CXT;
#endif
 dVAR;
 const bool utf8_target = reginfo->is_utf8_target;
 const U32 uniflags = UTF8_ALLOW_DEFAULT;
 REGEXP *rex_sv = reginfo->prog;
 regexp *rex = ReANY(rex_sv);
 RXi_GET_DECL(rex,rexi);
 /* the current state. This is a cached copy of PL_regmatch_state */
 regmatch_state *st;
 /* cache heavy used fields of st in registers */
 regnode *scan;
 regnode *next;
 U32 n = 0; /* general value; init to avoid compiler warning */
 SSize_t ln = 0; /* len or last;  init to avoid compiler warning */
 char *locinput = startpos;
 char *pushinput; /* where to continue after a PUSH */
 I32 nextchr;   /* is always set to UCHARAT(locinput) */

 bool result = 0;     /* return value of S_regmatch */
 int depth = 0;     /* depth of backtrack stack */
 U32 nochange_depth = 0; /* depth of GOSUB recursion with nochange */
 const U32 max_nochange_depth =
  (3 * rex->nparens > MAX_RECURSE_EVAL_NOCHANGE_DEPTH) ?
  3 * rex->nparens : MAX_RECURSE_EVAL_NOCHANGE_DEPTH;
 regmatch_state *yes_state = NULL; /* state to pop to on success of
               subpattern */
 /* mark_state piggy backs on the yes_state logic so that when we unwind
 the stack on success we can update the mark_state as we go */
 regmatch_state *mark_state = NULL; /* last mark state we have seen */
 regmatch_state *cur_eval = NULL; /* most recent EVAL_AB state */
 struct regmatch_state  *cur_curlyx = NULL; /* most recent curlyx */
 U32 state_num;
 bool no_final = 0;      /* prevent failure from backtracking? */
 bool do_cutgroup = 0;   /* no_final only until next branch/trie entry */
 char *startpoint = locinput;
 SV *popmark = NULL;     /* are we looking for a mark? */
 SV *sv_commit = NULL;   /* last mark name seen in failure */
 SV *sv_yes_mark = NULL; /* last mark name we have seen
       during a successful match */
 U32 lastopen = 0;       /* last open we saw */
 bool has_cutgroup = RX_HAS_CUTGROUP(rex) ? 1 : 0;
 SV* const oreplsv = GvSVn(PL_replgv);
 /* these three flags are set by various ops to signal information to
 * the very next op. They have a useful lifetime of exactly one loop
 * iteration, and are not preserved or restored by state pushes/pops
 */
 bool sw = 0;     /* the condition value in (?(cond)a|b) */
 bool minmod = 0;     /* the next "{n,m}" is a "{n,m}?" */
 int logical = 0;     /* the following EVAL is:
        0: (?{...})
        1: (?(?{...})X|Y)
        2: (??{...})
       or the following IFMATCH/UNLESSM is:
        false: plain (?=foo)
        true:  used as a condition: (?(?=foo))
       */
 PAD* last_pad = NULL;
 dMULTICALL;
 I32 gimme = G_SCALAR;
 CV *caller_cv = NULL; /* who called us */
 CV *last_pushed_cv = NULL; /* most recently called (?{}) CV */
 CHECKPOINT runops_cp; /* savestack position before executing EVAL */
 U32 maxopenparen = 0;       /* max '(' index seen so far */
 int to_complement;  /* Invert the result? */
 _char_class_number classnum;
 bool is_utf8_pat = reginfo->is_utf8_pat;

#ifdef DEBUGGING
 GET_RE_DEBUG_FLAGS_DECL;
#endif

 /* protect against undef(*^R) */
 SAVEFREESV(SvREFCNT_inc_simple_NN(oreplsv));

 /* shut up 'may be used uninitialized' compiler warnings for dMULTICALL */
 multicall_oldcatch = 0;
 multicall_cv = NULL;
 cx = NULL;
 PERL_UNUSED_VAR(multicall_cop);
 PERL_UNUSED_VAR(newsp);


 PERL_ARGS_ASSERT_REGMATCH;

 DEBUG_OPTIMISE_r( DEBUG_EXECUTE_r({
   PerlIO_printf(Perl_debug_log,"regmatch start\n");
 }));

 st = PL_regmatch_state;

 /* Note that nextchr is a byte even in UTF */
 SET_nextchr;
 scan = prog;
 while (scan != NULL) {

  DEBUG_EXECUTE_r( {
   SV * const prop = sv_newmortal();
   regnode *rnext=regnext(scan);
   DUMP_EXEC_POS( locinput, scan, utf8_target );
   regprop(rex, prop, scan, reginfo);

   PerlIO_printf(Perl_debug_log,
     "%3"IVdf":%*s%s(%"IVdf")\n",
     (IV)(scan - rexi->program), depth*2, "",
     SvPVX_const(prop),
     (PL_regkind[OP(scan)] == END || !rnext) ?
      0 : (IV)(rnext - rexi->program));
  });

  next = scan + NEXT_OFF(scan);
  if (next == scan)
   next = NULL;
  state_num = OP(scan);

  REH_CALL_EXEC_NODE_HOOK(rex, scan, reginfo, st);
 reenter_switch:
  to_complement = 0;

  SET_nextchr;
  assert(nextchr < 256 && (nextchr >= 0 || nextchr == NEXTCHR_EOS));

  switch (state_num) {
  case SBOL: /*  /^../ and /\A../  */
   if (locinput == reginfo->strbeg)
    break;
   sayNO;

  case MBOL: /*  /^../m  */
   if (locinput == reginfo->strbeg ||
    (!NEXTCHR_IS_EOS && locinput[-1] == '\n'))
   {
    break;
   }
   sayNO;

  case GPOS: /*  \G  */
   if (locinput == reginfo->ganch)
    break;
   sayNO;

  case KEEPS: /*   \K  */
   /* update the startpoint */
   st->u.keeper.val = rex->offs[0].start;
   rex->offs[0].start = locinput - reginfo->strbeg;
   PUSH_STATE_GOTO(KEEPS_next, next, locinput);
   /* NOTREACHED */
   assert(0);

  case KEEPS_next_fail:
   /* rollback the start point change */
   rex->offs[0].start = st->u.keeper.val;
   sayNO_SILENT;
   /* NOTREACHED */
   assert(0);

  case MEOL: /* /..$/m  */
   if (!NEXTCHR_IS_EOS && nextchr != '\n')
    sayNO;
   break;

  case SEOL: /* /..$/  */
   if (!NEXTCHR_IS_EOS && nextchr != '\n')
    sayNO;
   if (reginfo->strend - locinput > 1)
    sayNO;
   break;

  case EOS: /*  \z  */
   if (!NEXTCHR_IS_EOS)
    sayNO;
   break;

  case SANY: /*  /./s  */
   if (NEXTCHR_IS_EOS)
    sayNO;
   goto increment_locinput;

  case CANY: /*  \C  */
   if (NEXTCHR_IS_EOS)
    sayNO;
   locinput++;
   break;

  case REG_ANY: /*  /./  */
   if ((NEXTCHR_IS_EOS) || nextchr == '\n')
    sayNO;
   goto increment_locinput;


#undef  ST
#define ST st->u.trie
  case TRIEC: /* (ab|cd) with known charclass */
   /* In this case the charclass data is available inline so
   we can fail fast without a lot of extra overhead.
   */
   if(!NEXTCHR_IS_EOS && !ANYOF_BITMAP_TEST(scan, nextchr)) {
    DEBUG_EXECUTE_r(
     PerlIO_printf(Perl_debug_log,
       "%*s  %sfailed to match trie start class...%s\n",
       REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
    );
    sayNO_SILENT;
    /* NOTREACHED */
    assert(0);
   }
   /* FALLTHROUGH */
  case TRIE:  /* (ab|cd)  */
   /* the basic plan of execution of the trie is:
   * At the beginning, run though all the states, and
   * find the longest-matching word. Also remember the position
   * of the shortest matching word. For example, this pattern:
   *    1  2 3 4    5
   *    ab|a|x|abcd|abc
   * when matched against the string "abcde", will generate
   * accept states for all words except 3, with the longest
   * matching word being 4, and the shortest being 2 (with
   * the position being after char 1 of the string).
   *
   * Then for each matching word, in word order (i.e. 1,2,4,5),
   * we run the remainder of the pattern; on each try setting
   * the current position to the character following the word,
   * returning to try the next word on failure.
   *
   * We avoid having to build a list of words at runtime by
   * using a compile-time structure, wordinfo[].prev, which
   * gives, for each word, the previous accepting word (if any).
   * In the case above it would contain the mappings 1->2, 2->0,
   * 3->0, 4->5, 5->1.  We can use this table to generate, from
   * the longest word (4 above), a list of all words, by
   * following the list of prev pointers; this gives us the
   * unordered list 4,5,1,2. Then given the current word we have
   * just tried, we can go through the list and find the
   * next-biggest word to try (so if we just failed on word 2,
   * the next in the list is 4).
   *
   * Since at runtime we don't record the matching position in
   * the string for each word, we have to work that out for
   * each word we're about to process. The wordinfo table holds
   * the character length of each word; given that we recorded
   * at the start: the position of the shortest word and its
   * length in chars, we just need to move the pointer the
   * difference between the two char lengths. Depending on
   * Unicode status and folding, that's cheap or expensive.
   *
   * This algorithm is optimised for the case where are only a
   * small number of accept states, i.e. 0,1, or maybe 2.
   * With lots of accepts states, and having to try all of them,
   * it becomes quadratic on number of accept states to find all
   * the next words.
   */

   {
    /* what type of TRIE am I? (utf8 makes this contextual) */
    DECL_TRIE_TYPE(scan);

    /* what trie are we using right now */
    reg_trie_data * const trie
     = (reg_trie_data*)rexi->data->data[ ARG( scan ) ];
    HV * widecharmap = MUTABLE_HV(rexi->data->data[ ARG( scan ) + 1 ]);
    U32 state = trie->startstate;

    if (   trie->bitmap
     && (NEXTCHR_IS_EOS || !TRIE_BITMAP_TEST(trie, nextchr)))
    {
     if (trie->states[ state ].wordnum) {
      DEBUG_EXECUTE_r(
       PerlIO_printf(Perl_debug_log,
          "%*s  %smatched empty string...%s\n",
          REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
      );
      if (!trie->jump)
       break;
     } else {
      DEBUG_EXECUTE_r(
       PerlIO_printf(Perl_debug_log,
          "%*s  %sfailed to match trie start class...%s\n",
          REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
      );
      sayNO_SILENT;
    }
    }

   {
    U8 *uc = ( U8* )locinput;

    STRLEN len = 0;
    STRLEN foldlen = 0;
    U8 *uscan = (U8*)NULL;
    U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
    U32 charcount = 0; /* how many input chars we have matched */
    U32 accepted = 0; /* have we seen any accepting states? */

    ST.jump = trie->jump;
    ST.me = scan;
    ST.firstpos = NULL;
    ST.longfold = FALSE; /* char longer if folded => it's harder */
    ST.nextword = 0;

    /* fully traverse the TRIE; note the position of the
    shortest accept state and the wordnum of the longest
    accept state */

    while ( state && uc <= (U8*)(reginfo->strend) ) {
     U32 base = trie->states[ state ].trans.base;
     UV uvc = 0;
     U16 charid = 0;
     U16 wordnum;
     wordnum = trie->states[ state ].wordnum;

     if (wordnum) { /* it's an accept state */
      if (!accepted) {
       accepted = 1;
       /* record first match position */
       if (ST.longfold) {
        ST.firstpos = (U8*)locinput;
        ST.firstchars = 0;
       }
       else {
        ST.firstpos = uc;
        ST.firstchars = charcount;
       }
      }
      if (!ST.nextword || wordnum < ST.nextword)
       ST.nextword = wordnum;
      ST.topword = wordnum;
     }

     DEBUG_TRIE_EXECUTE_r({
        DUMP_EXEC_POS( (char *)uc, scan, utf8_target );
        PerlIO_printf( Perl_debug_log,
         "%*s  %sState: %4"UVxf" Accepted: %c ",
         2+depth * 2, "", PL_colors[4],
         (UV)state, (accepted ? 'Y' : 'N'));
     });

     /* read a char and goto next state */
     if ( base && (foldlen || uc < (U8*)(reginfo->strend))) {
      I32 offset;
      REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc,
           uscan, len, uvc, charid, foldlen,
           foldbuf, uniflags);
      charcount++;
      if (foldlen>0)
       ST.longfold = TRUE;
      if (charid &&
       ( ((offset =
       base + charid - 1 - trie->uniquecharcount)) >= 0)

       && ((U32)offset < trie->lasttrans)
       && trie->trans[offset].check == state)
      {
       state = trie->trans[offset].next;
      }
      else {
       state = 0;
      }
      uc += len;

     }
     else {
      state = 0;
     }
     DEBUG_TRIE_EXECUTE_r(
      PerlIO_printf( Perl_debug_log,
       "Charid:%3x CP:%4"UVxf" After State: %4"UVxf"%s\n",
       charid, uvc, (UV)state, PL_colors[5] );
     );
    }
    if (!accepted)
    sayNO;

    /* calculate total number of accept states */
    {
     U16 w = ST.topword;
     accepted = 0;
     while (w) {
      w = trie->wordinfo[w].prev;
      accepted++;
     }
     ST.accepted = accepted;
    }

    DEBUG_EXECUTE_r(
     PerlIO_printf( Perl_debug_log,
      "%*s  %sgot %"IVdf" possible matches%s\n",
      REPORT_CODE_OFF + depth * 2, "",
      PL_colors[4], (IV)ST.accepted, PL_colors[5] );
    );
    goto trie_first_try; /* jump into the fail handler */
   }}
   /* NOTREACHED */
   assert(0);

  case TRIE_next_fail: /* we failed - try next alternative */
  {
   U8 *uc;
   if ( ST.jump) {
    REGCP_UNWIND(ST.cp);
    UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
   }
   if (!--ST.accepted) {
    DEBUG_EXECUTE_r({
     PerlIO_printf( Perl_debug_log,
      "%*s  %sTRIE failed...%s\n",
      REPORT_CODE_OFF+depth*2, "",
      PL_colors[4],
      PL_colors[5] );
    });
    sayNO_SILENT;
   }
   {
    /* Find next-highest word to process.  Note that this code
    * is O(N^2) per trie run (O(N) per branch), so keep tight */
    U16 min = 0;
    U16 word;
    U16 const nextword = ST.nextword;
    reg_trie_wordinfo * const wordinfo
     = ((reg_trie_data*)rexi->data->data[ARG(ST.me)])->wordinfo;
    for (word=ST.topword; word; word=wordinfo[word].prev) {
     if (word > nextword && (!min || word < min))
      min = word;
    }
    ST.nextword = min;
   }

  trie_first_try:
   if (do_cutgroup) {
    do_cutgroup = 0;
    no_final = 0;
   }

   if ( ST.jump) {
    ST.lastparen = rex->lastparen;
    ST.lastcloseparen = rex->lastcloseparen;
    REGCP_SET(ST.cp);
   }

   /* find start char of end of current word */
   {
    U32 chars; /* how many chars to skip */
    reg_trie_data * const trie
     = (reg_trie_data*)rexi->data->data[ARG(ST.me)];

    assert((trie->wordinfo[ST.nextword].len - trie->prefixlen)
       >=  ST.firstchars);
    chars = (trie->wordinfo[ST.nextword].len - trie->prefixlen)
       - ST.firstchars;
    uc = ST.firstpos;

    if (ST.longfold) {
     /* the hard option - fold each char in turn and find
     * its folded length (which may be different */
     U8 foldbuf[UTF8_MAXBYTES_CASE + 1];
     STRLEN foldlen;
     STRLEN len;
     UV uvc;
     U8 *uscan;

     while (chars) {
      if (utf8_target) {
       uvc = utf8n_to_uvchr((U8*)uc, UTF8_MAXLEN, &len,
             uniflags);
       uc += len;
      }
      else {
       uvc = *uc;
       uc++;
      }
      uvc = to_uni_fold(uvc, foldbuf, &foldlen);
      uscan = foldbuf;
      while (foldlen) {
       if (!--chars)
        break;
       uvc = utf8n_to_uvchr(uscan, UTF8_MAXLEN, &len,
           uniflags);
       uscan += len;
       foldlen -= len;
      }
     }
    }
    else {
     if (utf8_target)
      while (chars--)
       uc += UTF8SKIP(uc);
     else
      uc += chars;
    }
   }

   scan = ST.me + ((ST.jump && ST.jump[ST.nextword])
       ? ST.jump[ST.nextword]
       : NEXT_OFF(ST.me));

   DEBUG_EXECUTE_r({
    PerlIO_printf( Perl_debug_log,
     "%*s  %sTRIE matched word #%d, continuing%s\n",
     REPORT_CODE_OFF+depth*2, "",
     PL_colors[4],
     ST.nextword,
     PL_colors[5]
     );
   });

   if (ST.accepted > 1 || has_cutgroup) {
    PUSH_STATE_GOTO(TRIE_next, scan, (char*)uc);
    /* NOTREACHED */
    assert(0);
   }
   /* only one choice left - just continue */
   DEBUG_EXECUTE_r({
    AV *const trie_words
     = MUTABLE_AV(rexi->data->data[ARG(ST.me)+TRIE_WORDS_OFFSET]);
    SV ** const tmp = av_fetch( trie_words,
     ST.nextword-1, 0 );
    SV *sv= tmp ? sv_newmortal() : NULL;

    PerlIO_printf( Perl_debug_log,
     "%*s  %sonly one match left, short-circuiting: #%d <%s>%s\n",
     REPORT_CODE_OFF+depth*2, "", PL_colors[4],
     ST.nextword,
     tmp ? pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 0,
       PL_colors[0], PL_colors[1],
       (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0)|PERL_PV_ESCAPE_NONASCII
      )
     : "not compiled under -Dr",
     PL_colors[5] );
   });

   locinput = (char*)uc;
   continue; /* execute rest of RE */
   /* NOTREACHED */
   assert(0);
  }
#undef  ST

  case EXACT: {            /*  /abc/        */
   char *s = STRING(scan);
   ln = STR_LEN(scan);
   if (utf8_target != is_utf8_pat) {
    /* The target and the pattern have differing utf8ness. */
    char *l = locinput;
    const char * const e = s + ln;

    if (utf8_target) {
     /* The target is utf8, the pattern is not utf8.
     * Above-Latin1 code points can't match the pattern;
     * invariants match exactly, and the other Latin1 ones need
     * to be downgraded to a single byte in order to do the
     * comparison.  (If we could be confident that the target
     * is not malformed, this could be refactored to have fewer
     * tests by just assuming that if the first bytes match, it
     * is an invariant, but there are tests in the test suite
     * dealing with (??{...}) which violate this) */
     while (s < e) {
      if (l >= reginfo->strend
       || UTF8_IS_ABOVE_LATIN1(* (U8*) l))
      {
       sayNO;
      }
      if (UTF8_IS_INVARIANT(*(U8*)l)) {
       if (*l != *s) {
        sayNO;
       }
       l++;
      }
      else {
       if (TWO_BYTE_UTF8_TO_NATIVE(*l, *(l+1)) != * (U8*) s)
       {
        sayNO;
       }
       l += 2;
      }
      s++;
     }
    }
    else {
     /* The target is not utf8, the pattern is utf8. */
     while (s < e) {
      if (l >= reginfo->strend
       || UTF8_IS_ABOVE_LATIN1(* (U8*) s))
      {
       sayNO;
      }
      if (UTF8_IS_INVARIANT(*(U8*)s)) {
       if (*s != *l) {
        sayNO;
       }
       s++;
      }
      else {
       if (TWO_BYTE_UTF8_TO_NATIVE(*s, *(s+1)) != * (U8*) l)
       {
        sayNO;
       }
       s += 2;
      }
      l++;
     }
    }
    locinput = l;
   }
   else {
    /* The target and the pattern have the same utf8ness. */
    /* Inline the first character, for speed. */
    if (reginfo->strend - locinput < ln
     || UCHARAT(s) != nextchr
     || (ln > 1 && memNE(s, locinput, ln)))
    {
     sayNO;
    }
    locinput += ln;
   }
   break;
   }

  case EXACTFL: {          /*  /abc/il      */
   re_fold_t folder;
   const U8 * fold_array;
   const char * s;
   U32 fold_utf8_flags;

   folder = foldEQ_locale;
   fold_array = PL_fold_locale;
   fold_utf8_flags = FOLDEQ_LOCALE;
   goto do_exactf;

  case EXACTFU_SS:         /*  /\x{df}/iu   */
  case EXACTFU:            /*  /abc/iu      */
   folder = foldEQ_latin1;
   fold_array = PL_fold_latin1;
   fold_utf8_flags = is_utf8_pat ? FOLDEQ_S1_ALREADY_FOLDED : 0;
   goto do_exactf;

  case EXACTFA_NO_TRIE:   /* This node only generated for non-utf8
        patterns */
   assert(! is_utf8_pat);
   /* FALLTHROUGH */
  case EXACTFA:            /*  /abc/iaa     */
   folder = foldEQ_latin1;
   fold_array = PL_fold_latin1;
   fold_utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
   goto do_exactf;

  case EXACTF:             /*  /abc/i    This node only generated for
           non-utf8 patterns */
   assert(! is_utf8_pat);
   folder = foldEQ;
   fold_array = PL_fold;
   fold_utf8_flags = 0;

  do_exactf:
   s = STRING(scan);
   ln = STR_LEN(scan);

   if (utf8_target
    || is_utf8_pat
    || state_num == EXACTFU_SS
    || (state_num == EXACTFL && IN_UTF8_CTYPE_LOCALE))
   {
   /* Either target or the pattern are utf8, or has the issue where
   * the fold lengths may differ. */
    const char * const l = locinput;
    char *e = reginfo->strend;

    if (! foldEQ_utf8_flags(s, 0,  ln, is_utf8_pat,
          l, &e, 0,  utf8_target, fold_utf8_flags))
    {
     sayNO;
    }
    locinput = e;
    break;
   }

   /* Neither the target nor the pattern are utf8 */
   if (UCHARAT(s) != nextchr
    && !NEXTCHR_IS_EOS
    && UCHARAT(s) != fold_array[nextchr])
   {
    sayNO;
   }
   if (reginfo->strend - locinput < ln)
    sayNO;
   if (ln > 1 && ! folder(s, locinput, ln))
    sayNO;
   locinput += ln;
   break;
  }

  /* XXX Could improve efficiency by separating these all out using a
  * macro or in-line function.  At that point regcomp.c would no longer
  * have to set the FLAGS fields of these */
  case BOUNDL:  /*  /\b/l  */
  case NBOUNDL: /*  /\B/l  */
  case BOUND:   /*  /\b/   */
  case BOUNDU:  /*  /\b/u  */
  case BOUNDA:  /*  /\b/a  */
  case NBOUND:  /*  /\B/   */
  case NBOUNDU: /*  /\B/u  */
  case NBOUNDA: /*  /\B/a  */
   /* was last char in word? */
   if (utf8_target
    && FLAGS(scan) != REGEX_ASCII_RESTRICTED_CHARSET
    && FLAGS(scan) != REGEX_ASCII_MORE_RESTRICTED_CHARSET)
   {
    if (locinput == reginfo->strbeg)
     ln = '\n';
    else {
     const U8 * const r =
       reghop3((U8*)locinput, -1, (U8*)(reginfo->strbeg));

     ln = utf8n_to_uvchr(r, (U8*) reginfo->strend - r,
                0, uniflags);
    }
    if (FLAGS(scan) != REGEX_LOCALE_CHARSET) {
     ln = isWORDCHAR_uni(ln);
     if (NEXTCHR_IS_EOS)
      n = 0;
     else {
      LOAD_UTF8_CHARCLASS_ALNUM();
      n = swash_fetch(PL_utf8_swash_ptrs[_CC_WORDCHAR], (U8*)locinput,
                utf8_target);
     }
    }
    else {
     ln = isWORDCHAR_LC_uvchr(ln);
     n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_LC_utf8((U8*)locinput);
    }
   }
   else {

    /* Here the string isn't utf8, or is utf8 and only ascii
    * characters are to match \w.  In the latter case looking at
    * the byte just prior to the current one may be just the final
    * byte of a multi-byte character.  This is ok.  There are two
    * cases:
    * 1) it is a single byte character, and then the test is doing
    * just what it's supposed to.
    * 2) it is a multi-byte character, in which case the final
    * byte is never mistakable for ASCII, and so the test
    * will say it is not a word character, which is the
    * correct answer. */
    ln = (locinput != reginfo->strbeg) ?
     UCHARAT(locinput - 1) : '\n';
    switch (FLAGS(scan)) {
     case REGEX_UNICODE_CHARSET:
      ln = isWORDCHAR_L1(ln);
      n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_L1(nextchr);
      break;
     case REGEX_LOCALE_CHARSET:
      ln = isWORDCHAR_LC(ln);
      n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_LC(nextchr);
      break;
     case REGEX_DEPENDS_CHARSET:
      ln = isWORDCHAR(ln);
      n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR(nextchr);
      break;
     case REGEX_ASCII_RESTRICTED_CHARSET:
     case REGEX_ASCII_MORE_RESTRICTED_CHARSET:
      ln = isWORDCHAR_A(ln);
      n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_A(nextchr);
      break;
     default:
      Perl_croak(aTHX_ "panic: Unexpected FLAGS %u in op %u", FLAGS(scan), OP(scan));
    }
   }
   /* Note requires that all BOUNDs be lower than all NBOUNDs in
   * regcomp.sym */
   if (((!ln) == (!n)) == (OP(scan) < NBOUND))
     sayNO;
   break;

  case ANYOF:  /*  /[abc]/       */
   if (NEXTCHR_IS_EOS)
    sayNO;
   if (utf8_target) {
    if (!reginclass(rex, scan, (U8*)locinput, (U8*)reginfo->strend,
                utf8_target))
     sayNO;
    locinput += UTF8SKIP(locinput);
   }
   else {
    if (!REGINCLASS(rex, scan, (U8*)locinput))
     sayNO;
    locinput++;
   }
   break;

  /* The argument (FLAGS) to all the POSIX node types is the class number
  * */

  case NPOSIXL:   /* \W or [:^punct:] etc. under /l */
   to_complement = 1;
   /* FALLTHROUGH */

  case POSIXL:    /* \w or [:punct:] etc. under /l */
   if (NEXTCHR_IS_EOS)
    sayNO;

   /* Use isFOO_lc() for characters within Latin1.  (Note that
   * UTF8_IS_INVARIANT works even on non-UTF-8 strings, or else
   * wouldn't be invariant) */
   if (UTF8_IS_INVARIANT(nextchr) || ! utf8_target) {
    if (! (to_complement ^ cBOOL(isFOO_lc(FLAGS(scan), (U8) nextchr)))) {
     sayNO;
    }
   }
   else if (UTF8_IS_DOWNGRADEABLE_START(nextchr)) {
    if (! (to_complement ^ cBOOL(isFOO_lc(FLAGS(scan),
          (U8) TWO_BYTE_UTF8_TO_NATIVE(nextchr,
               *(locinput + 1))))))
    {
     sayNO;
    }
   }
   else { /* Here, must be an above Latin-1 code point */
    goto utf8_posix_not_eos;
   }

   /* Here, must be utf8 */
   locinput += UTF8SKIP(locinput);
   break;

  case NPOSIXD:   /* \W or [:^punct:] etc. under /d */
   to_complement = 1;
   /* FALLTHROUGH */

  case POSIXD:    /* \w or [:punct:] etc. under /d */
   if (utf8_target) {
    goto utf8_posix;
   }
   goto posixa;

  case NPOSIXA:   /* \W or [:^punct:] etc. under /a */

   if (NEXTCHR_IS_EOS) {
    sayNO;
   }

   /* All UTF-8 variants match */
   if (! UTF8_IS_INVARIANT(nextchr)) {
    goto increment_locinput;
   }

   to_complement = 1;
   /* FALLTHROUGH */

  case POSIXA:    /* \w or [:punct:] etc. under /a */

  posixa:
   /* We get here through POSIXD, NPOSIXD, and NPOSIXA when not in
   * UTF-8, and also from NPOSIXA even in UTF-8 when the current
   * character is a single byte */

   if (NEXTCHR_IS_EOS
    || ! (to_complement ^ cBOOL(_generic_isCC_A(nextchr,
               FLAGS(scan)))))
   {
    sayNO;
   }

   /* Here we are either not in utf8, or we matched a utf8-invariant,
   * so the next char is the next byte */
   locinput++;
   break;

  case NPOSIXU:   /* \W or [:^punct:] etc. under /u */
   to_complement = 1;
   /* FALLTHROUGH */

  case POSIXU:    /* \w or [:punct:] etc. under /u */
  utf8_posix:
   if (NEXTCHR_IS_EOS) {
    sayNO;
   }
  utf8_posix_not_eos:

   /* Use _generic_isCC() for characters within Latin1.  (Note that
   * UTF8_IS_INVARIANT works even on non-UTF-8 strings, or else
   * wouldn't be invariant) */
   if (UTF8_IS_INVARIANT(nextchr) || ! utf8_target) {
    if (! (to_complement ^ cBOOL(_generic_isCC(nextchr,
              FLAGS(scan)))))
    {
     sayNO;
    }
    locinput++;
   }
   else if (UTF8_IS_DOWNGRADEABLE_START(nextchr)) {
    if (! (to_complement
     ^ cBOOL(_generic_isCC(TWO_BYTE_UTF8_TO_NATIVE(nextchr,
               *(locinput + 1)),
           FLAGS(scan)))))
    {
     sayNO;
    }
    locinput += 2;
   }
   else {  /* Handle above Latin-1 code points */
    classnum = (_char_class_number) FLAGS(scan);
    if (classnum < _FIRST_NON_SWASH_CC) {

     /* Here, uses a swash to find such code points.  Load if if
     * not done already */
     if (! PL_utf8_swash_ptrs[classnum]) {
      U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
      PL_utf8_swash_ptrs[classnum]
        = _core_swash_init("utf8",
          "",
          &PL_sv_undef, 1, 0,
          PL_XPosix_ptrs[classnum], &flags);
     }
     if (! (to_complement
      ^ cBOOL(swash_fetch(PL_utf8_swash_ptrs[classnum],
           (U8 *) locinput, TRUE))))
     {
      sayNO;
     }
    }
    else {  /* Here, uses macros to find above Latin-1 code points */
     switch (classnum) {
      case _CC_ENUM_SPACE:    /* XXX would require separate
            code if we revert the change
            of \v matching this */
      case _CC_ENUM_PSXSPC:
       if (! (to_complement
          ^ cBOOL(is_XPERLSPACE_high(locinput))))
       {
        sayNO;
       }
       break;
      case _CC_ENUM_BLANK:
       if (! (to_complement
           ^ cBOOL(is_HORIZWS_high(locinput))))
       {
        sayNO;
       }
       break;
      case _CC_ENUM_XDIGIT:
       if (! (to_complement
           ^ cBOOL(is_XDIGIT_high(locinput))))
       {
        sayNO;
       }
       break;
      case _CC_ENUM_VERTSPACE:
       if (! (to_complement
           ^ cBOOL(is_VERTWS_high(locinput))))
       {
        sayNO;
       }
       break;
      default:    /* The rest, e.g. [:cntrl:], can't match
         above Latin1 */
       if (! to_complement) {
        sayNO;
       }
       break;
     }
    }
    locinput += UTF8SKIP(locinput);
   }
   break;

  case CLUMP: /* Match \X: logical Unicode character.  This is defined as
     a Unicode extended Grapheme Cluster */
   /* From http://www.unicode.org/reports/tr29 (5.2 version).  An
   extended Grapheme Cluster is:

   CR LF
   | Prepend* Begin Extend*
   | .

   Begin is:           ( Special_Begin | ! Control )
   Special_Begin is:   ( Regional-Indicator+ | Hangul-syllable )
   Extend is:          ( Grapheme_Extend | Spacing_Mark )
   Control is:         [ GCB_Control | CR | LF ]
   Hangul-syllable is: ( T+ | ( L* ( L | ( LVT | ( V | LV ) V* ) T* ) ))

   If we create a 'Regular_Begin' = Begin - Special_Begin, then
   we can rewrite

    Begin is ( Regular_Begin + Special Begin )

   It turns out that 98.4% of all Unicode code points match
   Regular_Begin.  Doing it this way eliminates a table match in
   the previous implementation for almost all Unicode code points.

   There is a subtlety with Prepend* which showed up in testing.
   Note that the Begin, and only the Begin is required in:
    | Prepend* Begin Extend*
   Also, Begin contains '! Control'.  A Prepend must be a
   '!  Control', which means it must also be a Begin.  What it
   comes down to is that if we match Prepend* and then find no
   suitable Begin afterwards, that if we backtrack the last
   Prepend, that one will be a suitable Begin.
   */

   if (NEXTCHR_IS_EOS)
    sayNO;
   if  (! utf8_target) {

    /* Match either CR LF  or '.', as all the other possibilities
    * require utf8 */
    locinput++;     /* Match the . or CR */
    if (nextchr == '\r' /* And if it was CR, and the next is LF,
         match the LF */
     && locinput < reginfo->strend
     && UCHARAT(locinput) == '\n')
    {
     locinput++;
    }
   }
   else {

    /* Utf8: See if is ( CR LF ); already know that locinput <
    * reginfo->strend, so locinput+1 is in bounds */
    if ( nextchr == '\r' && locinput+1 < reginfo->strend
     && UCHARAT(locinput + 1) == '\n')
    {
     locinput += 2;
    }
    else {
     STRLEN len;

     /* In case have to backtrack to beginning, then match '.' */
     char *starting = locinput;

     /* In case have to backtrack the last prepend */
     char *previous_prepend = NULL;

     LOAD_UTF8_CHARCLASS_GCB();

     /* Match (prepend)*   */
     while (locinput < reginfo->strend
      && (len = is_GCB_Prepend_utf8(locinput)))
     {
      previous_prepend = locinput;
      locinput += len;
     }

     /* As noted above, if we matched a prepend character, but
     * the next thing won't match, back off the last prepend we
     * matched, as it is guaranteed to match the begin */
     if (previous_prepend
      && (locinput >=  reginfo->strend
       || (! swash_fetch(PL_utf8_X_regular_begin,
           (U8*)locinput, utf8_target)
        && ! is_GCB_SPECIAL_BEGIN_START_utf8(locinput)))
      )
     {
      locinput = previous_prepend;
     }

     /* Note that here we know reginfo->strend > locinput, as we
     * tested that upon input to this switch case, and if we
     * moved locinput forward, we tested the result just above
     * and it either passed, or we backed off so that it will
     * now pass */
     if (swash_fetch(PL_utf8_X_regular_begin,
         (U8*)locinput, utf8_target)) {
      locinput += UTF8SKIP(locinput);
     }
     else if (! is_GCB_SPECIAL_BEGIN_START_utf8(locinput)) {

      /* Here did not match the required 'Begin' in the
      * second term.  So just match the very first
      * character, the '.' of the final term of the regex */
      locinput = starting + UTF8SKIP(starting);
      goto exit_utf8;
     } else {

      /* Here is a special begin.  It can be composed of
      * several individual characters.  One possibility is
      * RI+ */
      if ((len = is_GCB_RI_utf8(locinput))) {
       locinput += len;
       while (locinput < reginfo->strend
        && (len = is_GCB_RI_utf8(locinput)))
       {
        locinput += len;
       }
      } else if ((len = is_GCB_T_utf8(locinput))) {
       /* Another possibility is T+ */
       locinput += len;
       while (locinput < reginfo->strend
        && (len = is_GCB_T_utf8(locinput)))
       {
        locinput += len;
       }
      } else {

       /* Here, neither RI+ nor T+; must be some other
       * Hangul.  That means it is one of the others: L,
       * LV, LVT or V, and matches:
       * L* (L | LVT T* | V * V* T* | LV  V* T*) */

       /* Match L*           */
       while (locinput < reginfo->strend
        && (len = is_GCB_L_utf8(locinput)))
       {
        locinput += len;
       }

       /* Here, have exhausted L*.  If the next character
       * is not an LV, LVT nor V, it means we had to have
       * at least one L, so matches L+ in the original
       * equation, we have a complete hangul syllable.
       * Are done. */

       if (locinput < reginfo->strend
        && is_GCB_LV_LVT_V_utf8(locinput))
       {
        /* Otherwise keep going.  Must be LV, LVT or V.
        * See if LVT, by first ruling out V, then LV */
        if (! is_GCB_V_utf8(locinput)
          /* All but every TCount one is LV */
         && (valid_utf8_to_uvchr((U8 *) locinput,
                  NULL)
                  - SBASE)
          % TCount != 0)
        {
         locinput += UTF8SKIP(locinput);
        } else {

         /* Must be  V or LV.  Take it, then match
         * V*     */
         locinput += UTF8SKIP(locinput);
         while (locinput < reginfo->strend
          && (len = is_GCB_V_utf8(locinput)))
         {
          locinput += len;
         }
        }

        /* And any of LV, LVT, or V can be followed
        * by T*            */
        while (locinput < reginfo->strend
         && (len = is_GCB_T_utf8(locinput)))
        {
         locinput += len;
        }
       }
      }
     }

     /* Match any extender */
     while (locinput < reginfo->strend
       && swash_fetch(PL_utf8_X_extend,
           (U8*)locinput, utf8_target))
     {
      locinput += UTF8SKIP(locinput);
     }
    }
   exit_utf8:
    if (locinput > reginfo->strend) sayNO;
   }
   break;

  case NREFFL:  /*  /\g{name}/il  */
  {   /* The capture buffer cases.  The ones beginning with N for the
   named buffers just convert to the equivalent numbered and
   pretend they were called as the corresponding numbered buffer
   op.  */
   /* don't initialize these in the declaration, it makes C++
   unhappy */
   const char *s;
   char type;
   re_fold_t folder;
   const U8 *fold_array;
   UV utf8_fold_flags;

   folder = foldEQ_locale;
   fold_array = PL_fold_locale;
   type = REFFL;
   utf8_fold_flags = FOLDEQ_LOCALE;
   goto do_nref;

  case NREFFA:  /*  /\g{name}/iaa  */
   folder = foldEQ_latin1;
   fold_array = PL_fold_latin1;
   type = REFFA;
   utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
   goto do_nref;

  case NREFFU:  /*  /\g{name}/iu  */
   folder = foldEQ_latin1;
   fold_array = PL_fold_latin1;
   type = REFFU;
   utf8_fold_flags = 0;
   goto do_nref;

  case NREFF:  /*  /\g{name}/i  */
   folder = foldEQ;
   fold_array = PL_fold;
   type = REFF;
   utf8_fold_flags = 0;
   goto do_nref;

  case NREF:  /*  /\g{name}/   */
   type = REF;
   folder = NULL;
   fold_array = NULL;
   utf8_fold_flags = 0;
  do_nref:

   /* For the named back references, find the corresponding buffer
   * number */
   n = reg_check_named_buff_matched(rex,scan);

   if ( ! n ) {
    sayNO;
   }
   goto do_nref_ref_common;

  case REFFL:  /*  /\1/il  */
   folder = foldEQ_locale;
   fold_array = PL_fold_locale;
   utf8_fold_flags = FOLDEQ_LOCALE;
   goto do_ref;

  case REFFA:  /*  /\1/iaa  */
   folder = foldEQ_latin1;
   fold_array = PL_fold_latin1;
   utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
   goto do_ref;

  case REFFU:  /*  /\1/iu  */
   folder = foldEQ_latin1;
   fold_array = PL_fold_latin1;
   utf8_fold_flags = 0;
   goto do_ref;

  case REFF:  /*  /\1/i  */
   folder = foldEQ;
   fold_array = PL_fold;
   utf8_fold_flags = 0;
   goto do_ref;

  case REF:  /*  /\1/    */
   folder = NULL;
   fold_array = NULL;
   utf8_fold_flags = 0;

  do_ref:
   type = OP(scan);
   n = ARG(scan);  /* which paren pair */

  do_nref_ref_common:
   ln = rex->offs[n].start;
   reginfo->poscache_iter = reginfo->poscache_maxiter; /* Void cache */
   if (rex->lastparen < n || ln == -1)
    sayNO;   /* Do not match unless seen CLOSEn. */
   if (ln == rex->offs[n].end)
    break;

   s = reginfo->strbeg + ln;
   if (type != REF /* REF can do byte comparison */
    && (utf8_target || type == REFFU || type == REFFL))
   {
    char * limit = reginfo->strend;

    /* This call case insensitively compares the entire buffer
     * at s, with the current input starting at locinput, but
     * not going off the end given by reginfo->strend, and
     * returns in <limit> upon success, how much of the
     * current input was matched */
    if (! foldEQ_utf8_flags(s, NULL, rex->offs[n].end - ln, utf8_target,
         locinput, &limit, 0, utf8_target, utf8_fold_flags))
    {
     sayNO;
    }
    locinput = limit;
    break;
   }

   /* Not utf8:  Inline the first character, for speed. */
   if (!NEXTCHR_IS_EOS &&
    UCHARAT(s) != nextchr &&
    (type == REF ||
    UCHARAT(s) != fold_array[nextchr]))
    sayNO;
   ln = rex->offs[n].end - ln;
   if (locinput + ln > reginfo->strend)
    sayNO;
   if (ln > 1 && (type == REF
      ? memNE(s, locinput, ln)
      : ! folder(s, locinput, ln)))
    sayNO;
   locinput += ln;
   break;
  }

  case NOTHING: /* null op; e.g. the 'nothing' following
     * the '*' in m{(a+|b)*}' */
   break;
  case TAIL: /* placeholder while compiling (A|B|C) */
   break;

  case BACK: /* ??? doesn't appear to be used ??? */
   break;

#undef  ST
#define ST st->u.eval
  {
   SV *ret;
   REGEXP *re_sv;
   regexp *re;
   regexp_internal *rei;
   regnode *startpoint;

  case GOSTART: /*  (?R)  */
  case GOSUB: /*    /(...(?1))/   /(...(?&foo))/   */
   if (cur_eval && cur_eval->locinput==locinput) {
    if (cur_eval->u.eval.close_paren == (U32)ARG(scan))
     Perl_croak(aTHX_ "Infinite recursion in regex");
    if ( ++nochange_depth > max_nochange_depth )
     Perl_croak(aTHX_
      "Pattern subroutine nesting without pos change"
      " exceeded limit in regex");
   } else {
    nochange_depth = 0;
   }
   re_sv = rex_sv;
   re = rex;
   rei = rexi;
   if (OP(scan)==GOSUB) {
    startpoint = scan + ARG2L(scan);
    ST.close_paren = ARG(scan);
   } else {
    startpoint = rei->program+1;
    ST.close_paren = 0;
   }

   /* Save all the positions seen so far. */
   ST.cp = regcppush(rex, 0, maxopenparen);
   REGCP_SET(ST.lastcp);

   /* and then jump to the code we share with EVAL */
   goto eval_recurse_doit;

   /* NOTREACHED */
   assert(0);

  case EVAL:  /*   /(?{A})B/   /(??{A})B/  and /(?(?{A})X|Y)B/   */
   if (cur_eval && cur_eval->locinput==locinput) {
    if ( ++nochange_depth > max_nochange_depth )
     Perl_croak(aTHX_ "EVAL without pos change exceeded limit in regex");
   } else {
    nochange_depth = 0;
   }
   {
    /* execute the code in the {...} */

    dSP;
    IV before;
    OP * const oop = PL_op;
    COP * const ocurcop = PL_curcop;
    OP *nop;
    CV *newcv;

    /* save *all* paren positions */
    regcppush(rex, 0, maxopenparen);
    REGCP_SET(runops_cp);

    if (!caller_cv)
     caller_cv = find_runcv(NULL);

    n = ARG(scan);

    if (rexi->data->what[n] == 'r') { /* code from an external qr */
     newcv = (ReANY(
            (REGEXP*)(rexi->data->data[n])
           ))->qr_anoncv
          ;
     nop = (OP*)rexi->data->data[n+1];
    }
    else if (rexi->data->what[n] == 'l') { /* literal code */
     newcv = caller_cv;
     nop = (OP*)rexi->data->data[n];
     assert(CvDEPTH(newcv));
    }
    else {
     /* literal with own CV */
     assert(rexi->data->what[n] == 'L');
     newcv = rex->qr_anoncv;
     nop = (OP*)rexi->data->data[n];
    }

    /* normally if we're about to execute code from the same
    * CV that we used previously, we just use the existing
    * CX stack entry. However, its possible that in the
    * meantime we may have backtracked, popped from the save
    * stack, and undone the SAVECOMPPAD(s) associated with
    * PUSH_MULTICALL; in which case PL_comppad no longer
    * points to newcv's pad. */
    if (newcv != last_pushed_cv || PL_comppad != last_pad)
    {
     U8 flags = (CXp_SUB_RE |
        ((newcv == caller_cv) ? CXp_SUB_RE_FAKE : 0));
     if (last_pushed_cv) {
      CHANGE_MULTICALL_FLAGS(newcv, flags);
     }
     else {
      PUSH_MULTICALL_FLAGS(newcv, flags);
     }
     last_pushed_cv = newcv;
    }
    else {
     /* these assignments are just to silence compiler
     * warnings */
     multicall_cop = NULL;
     newsp = NULL;
    }
    last_pad = PL_comppad;

    /* the initial nextstate you would normally execute
    * at the start of an eval (which would cause error
    * messages to come from the eval), may be optimised
    * away from the execution path in the regex code blocks;
    * so manually set PL_curcop to it initially */
    {
     OP *o = cUNOPx(nop)->op_first;
     assert(o->op_type == OP_NULL);
     if (o->op_targ == OP_SCOPE) {
      o = cUNOPo->op_first;
     }
     else {
      assert(o->op_targ == OP_LEAVE);
      o = cUNOPo->op_first;
      assert(o->op_type == OP_ENTER);
      o = OP_SIBLING(o);
     }

     if (o->op_type != OP_STUB) {
      assert(    o->op_type == OP_NEXTSTATE
        || o->op_type == OP_DBSTATE
        || (o->op_type == OP_NULL
         &&  (  o->op_targ == OP_NEXTSTATE
          || o->op_targ == OP_DBSTATE
          )
         )
      );
      PL_curcop = (COP*)o;
     }
    }
    nop = nop->op_next;

    DEBUG_STATE_r( PerlIO_printf(Perl_debug_log,
     "  re EVAL PL_op=0x%"UVxf"\n", PTR2UV(nop)) );

    rex->offs[0].end = locinput - reginfo->strbeg;
    if (reginfo->info_aux_eval->pos_magic)
     MgBYTEPOS_set(reginfo->info_aux_eval->pos_magic,
        reginfo->sv, reginfo->strbeg,
        locinput - reginfo->strbeg);

    if (sv_yes_mark) {
     SV *sv_mrk = get_sv("REGMARK", 1);
     sv_setsv(sv_mrk, sv_yes_mark);
    }

    /* we don't use MULTICALL here as we want to call the
    * first op of the block of interest, rather than the
    * first op of the sub */
    before = (IV)(SP-PL_stack_base);
    PL_op = nop;
    CALLRUNOPS(aTHX);   /* Scalar context. */
    SPAGAIN;
    if ((IV)(SP-PL_stack_base) == before)
     ret = &PL_sv_undef;   /* protect against empty (?{}) blocks. */
    else {
     ret = POPs;
     PUTBACK;
    }

    /* before restoring everything, evaluate the returned
    * value, so that 'uninit' warnings don't use the wrong
    * PL_op or pad. Also need to process any magic vars
    * (e.g. $1) *before* parentheses are restored */

    PL_op = NULL;

    re_sv = NULL;
    if (logical == 0)        /*   (?{})/   */
     sv_setsv(save_scalar(PL_replgv), ret); /* $^R */
    else if (logical == 1) { /*   /(?(?{...})X|Y)/    */
     sw = cBOOL(SvTRUE(ret));
     logical = 0;
    }
    else {                   /*  /(??{})  */
     /*  if its overloaded, let the regex compiler handle
     *  it; otherwise extract regex, or stringify  */
     if (SvGMAGICAL(ret))
      ret = sv_mortalcopy(ret);
     if (!SvAMAGIC(ret)) {
      SV *sv = ret;
      if (SvROK(sv))
       sv = SvRV(sv);
      if (SvTYPE(sv) == SVt_REGEXP)
       re_sv = (REGEXP*) sv;
      else if (SvSMAGICAL(ret)) {
       MAGIC *mg = mg_find(ret, PERL_MAGIC_qr);
       if (mg)
        re_sv = (REGEXP *) mg->mg_obj;
      }

      /* force any undef warnings here */
      if (!re_sv && !SvPOK(ret) && !SvNIOK(ret)) {
       ret = sv_mortalcopy(ret);
       (void) SvPV_force_nolen(ret);
      }
     }

    }

    /* *** Note that at this point we don't restore
    * PL_comppad, (or pop the CxSUB) on the assumption it may
    * be used again soon. This is safe as long as nothing
    * in the regexp code uses the pad ! */
    PL_op = oop;
    PL_curcop = ocurcop;
    S_regcp_restore(aTHX_ rex, runops_cp, &maxopenparen);
    PL_curpm = PL_reg_curpm;

    if (logical != 2)
     break;
   }

    /* only /(??{})/  from now on */
    logical = 0;
    {
     /* extract RE object from returned value; compiling if
     * necessary */

     if (re_sv) {
      re_sv = reg_temp_copy(NULL, re_sv);
     }
     else {
      U32 pm_flags = 0;

      if (SvUTF8(ret) && IN_BYTES) {
       /* In use 'bytes': make a copy of the octet
       * sequence, but without the flag on */
       STRLEN len;
       const char *const p = SvPV(ret, len);
       ret = newSVpvn_flags(p, len, SVs_TEMP);
      }
      if (rex->intflags & PREGf_USE_RE_EVAL)
       pm_flags |= PMf_USE_RE_EVAL;

      /* if we got here, it should be an engine which
      * supports compiling code blocks and stuff */
      assert(rex->engine && rex->engine->op_comp);
      assert(!(scan->flags & ~RXf_PMf_COMPILETIME));
      re_sv = rex->engine->op_comp(aTHX_ &ret, 1, NULL,
         rex->engine, NULL, NULL,
         /* copy /msix etc to inner pattern */
         scan->flags,
         pm_flags);

      if (!(SvFLAGS(ret)
       & (SVs_TEMP | SVs_GMG | SVf_ROK))
      && (!SvPADTMP(ret) || SvREADONLY(ret))) {
       /* This isn't a first class regexp. Instead, it's
       caching a regexp onto an existing, Perl visible
       scalar.  */
       sv_magic(ret, MUTABLE_SV(re_sv), PERL_MAGIC_qr, 0, 0);
      }
     }
     SAVEFREESV(re_sv);
     re = ReANY(re_sv);
    }
    RXp_MATCH_COPIED_off(re);
    re->subbeg = rex->subbeg;
    re->sublen = rex->sublen;
    re->suboffset = rex->suboffset;
    re->subcoffset = rex->subcoffset;
    re->lastparen = 0;
    re->lastcloseparen = 0;
    rei = RXi_GET(re);
    DEBUG_EXECUTE_r(
     debug_start_match(re_sv, utf8_target, locinput,
         reginfo->strend, "Matching embedded");
    );
    startpoint = rei->program + 1;
     ST.close_paren = 0; /* only used for GOSUB */
    /* Save all the seen positions so far. */
    ST.cp = regcppush(rex, 0, maxopenparen);
    REGCP_SET(ST.lastcp);
    /* and set maxopenparen to 0, since we are starting a "fresh" match */
    maxopenparen = 0;
    /* run the pattern returned from (??{...}) */

  eval_recurse_doit: /* Share code with GOSUB below this line
       * At this point we expect the stack context to be
       * set up correctly */

    /* invalidate the S-L poscache. We're now executing a
    * different set of WHILEM ops (and their associated
    * indexes) against the same string, so the bits in the
    * cache are meaningless. Setting maxiter to zero forces
    * the cache to be invalidated and zeroed before reuse.
    * XXX This is too dramatic a measure. Ideally we should
    * save the old cache and restore when running the outer
    * pattern again */
    reginfo->poscache_maxiter = 0;

    /* the new regexp might have a different is_utf8_pat than we do */
    is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(re_sv));

    ST.prev_rex = rex_sv;
    ST.prev_curlyx = cur_curlyx;
    rex_sv = re_sv;
    SET_reg_curpm(rex_sv);
    rex = re;
    rexi = rei;
    cur_curlyx = NULL;
    ST.B = next;
    ST.prev_eval = cur_eval;
    cur_eval = st;
    /* now continue from first node in postoned RE */
    PUSH_YES_STATE_GOTO(EVAL_AB, startpoint, locinput);
    /* NOTREACHED */
    assert(0);
  }

  case EVAL_AB: /* cleanup after a successful (??{A})B */
   /* note: this is called twice; first after popping B, then A */
   rex_sv = ST.prev_rex;
   is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
   SET_reg_curpm(rex_sv);
   rex = ReANY(rex_sv);
   rexi = RXi_GET(rex);
   {
    /* preserve $^R across LEAVE's. See Bug 121070. */
    SV *save_sv= GvSV(PL_replgv);
    SvREFCNT_inc(save_sv);
    regcpblow(ST.cp); /* LEAVE in disguise */
    sv_setsv(GvSV(PL_replgv), save_sv);
    SvREFCNT_dec(save_sv);
   }
   cur_eval = ST.prev_eval;
   cur_curlyx = ST.prev_curlyx;

   /* Invalidate cache. See "invalidate" comment above. */
   reginfo->poscache_maxiter = 0;
   if ( nochange_depth )
    nochange_depth--;
   sayYES;


  case EVAL_AB_fail: /* unsuccessfully ran A or B in (??{A})B */
   /* note: this is called twice; first after popping B, then A */
   rex_sv = ST.prev_rex;
   is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
   SET_reg_curpm(rex_sv);
   rex = ReANY(rex_sv);
   rexi = RXi_GET(rex);

   REGCP_UNWIND(ST.lastcp);
   regcppop(rex, &maxopenparen);
   cur_eval = ST.prev_eval;
   cur_curlyx = ST.prev_curlyx;
   /* Invalidate cache. See "invalidate" comment above. */
   reginfo->poscache_maxiter = 0;
   if ( nochange_depth )
    nochange_depth--;
   sayNO_SILENT;
#undef ST

  case OPEN: /*  (  */
   n = ARG(scan);  /* which paren pair */
   rex->offs[n].start_tmp = locinput - reginfo->strbeg;
   if (n > maxopenparen)
    maxopenparen = n;
   DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
    "rex=0x%"UVxf" offs=0x%"UVxf": \\%"UVuf": set %"IVdf" tmp; maxopenparen=%"UVuf"\n",
    PTR2UV(rex),
    PTR2UV(rex->offs),
    (UV)n,
    (IV)rex->offs[n].start_tmp,
    (UV)maxopenparen
   ));
   lastopen = n;
   break;

/* XXX really need to log other places start/end are set too */
#define CLOSE_CAPTURE \
 rex->offs[n].start = rex->offs[n].start_tmp; \
 rex->offs[n].end = locinput - reginfo->strbeg; \
 DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log, \
  "rex=0x%"UVxf" offs=0x%"UVxf": \\%"UVuf": set %"IVdf"..%"IVdf"\n", \
  PTR2UV(rex), \
  PTR2UV(rex->offs), \
  (UV)n, \
  (IV)rex->offs[n].start, \
  (IV)rex->offs[n].end \
 ))

  case CLOSE:  /*  )  */
   n = ARG(scan);  /* which paren pair */
   CLOSE_CAPTURE;
   if (n > rex->lastparen)
    rex->lastparen = n;
   rex->lastcloseparen = n;
   if (cur_eval && cur_eval->u.eval.close_paren == n) {
    goto fake_end;
   }
   break;

  case ACCEPT:  /*  (*ACCEPT)  */
   if (ARG(scan)){
    regnode *cursor;
    for (cursor=scan;
     cursor && OP(cursor)!=END;
     cursor=regnext(cursor))
    {
     if ( OP(cursor)==CLOSE ){
      n = ARG(cursor);
      if ( n <= lastopen ) {
       CLOSE_CAPTURE;
       if (n > rex->lastparen)
        rex->lastparen = n;
       rex->lastcloseparen = n;
       if ( n == ARG(scan) || (cur_eval &&
        cur_eval->u.eval.close_paren == n))
        break;
      }
     }
    }
   }
   goto fake_end;
   /* NOTREACHED */

  case GROUPP:  /*  (?(1))  */
   n = ARG(scan);  /* which paren pair */
   sw = cBOOL(rex->lastparen >= n && rex->offs[n].end != -1);
   break;

  case NGROUPP:  /*  (?(<name>))  */
   /* reg_check_named_buff_matched returns 0 for no match */
   sw = cBOOL(0 < reg_check_named_buff_matched(rex,scan));
   break;

  case INSUBP:   /*  (?(R))  */
   n = ARG(scan);
   sw = (cur_eval && (!n || cur_eval->u.eval.close_paren == n));
   break;

  case DEFINEP:  /*  (?(DEFINE))  */
   sw = 0;
   break;

  case IFTHEN:   /*  (?(cond)A|B)  */
   reginfo->poscache_iter = reginfo->poscache_maxiter; /* Void cache */
   if (sw)
    next = NEXTOPER(NEXTOPER(scan));
   else {
    next = scan + ARG(scan);
    if (OP(next) == IFTHEN) /* Fake one. */
     next = NEXTOPER(NEXTOPER(next));
   }
   break;

  case LOGICAL:  /* modifier for EVAL and IFMATCH */
   logical = scan->flags;
   break;

/*******************************************************************

The CURLYX/WHILEM pair of ops handle the most generic case of the /A*B/
pattern, where A and B are subpatterns. (For simple A, CURLYM or
STAR/PLUS/CURLY/CURLYN are used instead.)

A*B is compiled as <CURLYX><A><WHILEM><B>

On entry to the subpattern, CURLYX is called. This pushes a CURLYX
state, which contains the current count, initialised to -1. It also sets
cur_curlyx to point to this state, with any previous value saved in the
state block.

CURLYX then jumps straight to the WHILEM op, rather than executing A,
since the pattern may possibly match zero times (i.e. it's a while {} loop
rather than a do {} while loop).

Each entry to WHILEM represents a successful match of A. The count in the
CURLYX block is incremented, another WHILEM state is pushed, and execution
passes to A or B depending on greediness and the current count.

For example, if matching against the string a1a2a3b (where the aN are
substrings that match /A/), then the match progresses as follows: (the
pushed states are interspersed with the bits of strings matched so far):

 <CURLYX cnt=-1>
 <CURLYX cnt=0><WHILEM>
 <CURLYX cnt=1><WHILEM> a1 <WHILEM>
 <CURLYX cnt=2><WHILEM> a1 <WHILEM> a2 <WHILEM>
 <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM>
 <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM> b

(Contrast this with something like CURLYM, which maintains only a single
backtrack state:

 <CURLYM cnt=0> a1
 a1 <CURLYM cnt=1> a2
 a1 a2 <CURLYM cnt=2> a3
 a1 a2 a3 <CURLYM cnt=3> b
)

Each WHILEM state block marks a point to backtrack to upon partial failure
of A or B, and also contains some minor state data related to that
iteration.  The CURLYX block, pointed to by cur_curlyx, contains the
overall state, such as the count, and pointers to the A and B ops.

This is complicated slightly by nested CURLYX/WHILEM's. Since cur_curlyx
must always point to the *current* CURLYX block, the rules are:

When executing CURLYX, save the old cur_curlyx in the CURLYX state block,
and set cur_curlyx to point the new block.

When popping the CURLYX block after a successful or unsuccessful match,
restore the previous cur_curlyx.

When WHILEM is about to execute B, save the current cur_curlyx, and set it
to the outer one saved in the CURLYX block.

When popping the WHILEM block after a successful or unsuccessful B match,
restore the previous cur_curlyx.

Here's an example for the pattern (AI* BI)*BO
I and O refer to inner and outer, C and W refer to CURLYX and WHILEM:

cur_
curlyx backtrack stack
------ ---------------
NULL
CO     <CO prev=NULL> <WO>
CI     <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
CO     <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
NULL   <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi <WO prev=CO> bo

At this point the pattern succeeds, and we work back down the stack to
clean up, restoring as we go:

CO     <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
CI     <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
CO     <CO prev=NULL> <WO>
NULL

*******************************************************************/

#define ST st->u.curlyx

  case CURLYX:    /* start of /A*B/  (for complex A) */
  {
   /* No need to save/restore up to this paren */
   I32 parenfloor = scan->flags;

   assert(next); /* keep Coverity happy */
   if (OP(PREVOPER(next)) == NOTHING) /* LONGJMP */
    next += ARG(next);

   /* XXXX Probably it is better to teach regpush to support
   parenfloor > maxopenparen ... */
   if (parenfloor > (I32)rex->lastparen)
    parenfloor = rex->lastparen; /* Pessimization... */

   ST.prev_curlyx= cur_curlyx;
   cur_curlyx = st;
   ST.cp = PL_savestack_ix;

   /* these fields contain the state of the current curly.
   * they are accessed by subsequent WHILEMs */
   ST.parenfloor = parenfloor;
   ST.me = scan;
   ST.B = next;
   ST.minmod = minmod;
   minmod = 0;
   ST.count = -1; /* this will be updated by WHILEM */
   ST.lastloc = NULL;  /* this will be updated by WHILEM */

   PUSH_YES_STATE_GOTO(CURLYX_end, PREVOPER(next), locinput);
   /* NOTREACHED */
   assert(0);
  }

  case CURLYX_end: /* just finished matching all of A*B */
   cur_curlyx = ST.prev_curlyx;
   sayYES;
   /* NOTREACHED */
   assert(0);

  case CURLYX_end_fail: /* just failed to match all of A*B */
   regcpblow(ST.cp);
   cur_curlyx = ST.prev_curlyx;
   sayNO;
   /* NOTREACHED */
   assert(0);


#undef ST
#define ST st->u.whilem

  case WHILEM:     /* just matched an A in /A*B/  (for complex A) */
  {
   /* see the discussion above about CURLYX/WHILEM */
   I32 n;
   int min, max;
   regnode *A;

   assert(cur_curlyx); /* keep Coverity happy */

   min = ARG1(cur_curlyx->u.curlyx.me);
   max = ARG2(cur_curlyx->u.curlyx.me);
   A = NEXTOPER(cur_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS;
   n = ++cur_curlyx->u.curlyx.count; /* how many A's matched */
   ST.save_lastloc = cur_curlyx->u.curlyx.lastloc;
   ST.cache_offset = 0;
   ST.cache_mask = 0;


   DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
    "%*s  whilem: matched %ld out of %d..%d\n",
    REPORT_CODE_OFF+depth*2, "", (long)n, min, max)
   );

   /* First just match a string of min A's. */

   if (n < min) {
    ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
         maxopenparen);
    cur_curlyx->u.curlyx.lastloc = locinput;
    REGCP_SET(ST.lastcp);

    PUSH_STATE_GOTO(WHILEM_A_pre, A, locinput);
    /* NOTREACHED */
    assert(0);
   }

   /* If degenerate A matches "", assume A done. */

   if (locinput == cur_curlyx->u.curlyx.lastloc) {
    DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
    "%*s  whilem: empty match detected, trying continuation...\n",
    REPORT_CODE_OFF+depth*2, "")
    );
    goto do_whilem_B_max;
   }

   /* super-linear cache processing.
   *
   * The idea here is that for certain types of CURLYX/WHILEM -
   * principally those whose upper bound is infinity (and
   * excluding regexes that have things like \1 and other very
   * non-regular expresssiony things), then if a pattern like
   * /....A*.../ fails and we backtrack to the WHILEM, then we
   * make a note that this particular WHILEM op was at string
   * position 47 (say) when the rest of pattern failed. Then, if
   * we ever find ourselves back at that WHILEM, and at string
   * position 47 again, we can just fail immediately rather than
   * running the rest of the pattern again.
   *
   * This is very handy when patterns start to go
   * 'super-linear', like in (a+)*(a+)*(a+)*, where you end up
   * with a combinatorial explosion of backtracking.
   *
   * The cache is implemented as a bit array, with one bit per
   * string byte position per WHILEM op (up to 16) - so its
   * between 0.25 and 2x the string size.
   *
   * To avoid allocating a poscache buffer every time, we do an
   * initially countdown; only after we have  executed a WHILEM
   * op (string-length x #WHILEMs) times do we allocate the
   * cache.
   *
   * The top 4 bits of scan->flags byte say how many different
   * relevant CURLLYX/WHILEM op pairs there are, while the
   * bottom 4-bits is the identifying index number of this
   * WHILEM.
   */

   if (scan->flags) {

    if (!reginfo->poscache_maxiter) {
     /* start the countdown: Postpone detection until we
     * know the match is not *that* much linear. */
     reginfo->poscache_maxiter
      =    (reginfo->strend - reginfo->strbeg + 1)
      * (scan->flags>>4);
     /* possible overflow for long strings and many CURLYX's */
     if (reginfo->poscache_maxiter < 0)
      reginfo->poscache_maxiter = I32_MAX;
     reginfo->poscache_iter = reginfo->poscache_maxiter;
    }

    if (reginfo->poscache_iter-- == 0) {
     /* initialise cache */
     const SSize_t size = (reginfo->poscache_maxiter + 7)/8;
     regmatch_info_aux *const aux = reginfo->info_aux;
     if (aux->poscache) {
      if ((SSize_t)reginfo->poscache_size < size) {
       Renew(aux->poscache, size, char);
       reginfo->poscache_size = size;
      }
      Zero(aux->poscache, size, char);
     }
     else {
      reginfo->poscache_size = size;
      Newxz(aux->poscache, size, char);
     }
     DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
 "%swhilem: Detected a super-linear match, switching on caching%s...\n",
       PL_colors[4], PL_colors[5])
     );
    }

    if (reginfo->poscache_iter < 0) {
     /* have we already failed at this position? */
     SSize_t offset, mask;

     reginfo->poscache_iter = -1; /* stop eventual underflow */
     offset  = (scan->flags & 0xf) - 1
        +   (locinput - reginfo->strbeg)
        * (scan->flags>>4);
     mask    = 1 << (offset % 8);
     offset /= 8;
     if (reginfo->info_aux->poscache[offset] & mask) {
      DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
       "%*s  whilem: (cache) already tried at this position...\n",
       REPORT_CODE_OFF+depth*2, "")
      );
      sayNO; /* cache records failure */
     }
     ST.cache_offset = offset;
     ST.cache_mask   = mask;
    }
   }

   /* Prefer B over A for minimal matching. */

   if (cur_curlyx->u.curlyx.minmod) {
    ST.save_curlyx = cur_curlyx;
    cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
    ST.cp = regcppush(rex, ST.save_curlyx->u.curlyx.parenfloor,
       maxopenparen);
    REGCP_SET(ST.lastcp);
    PUSH_YES_STATE_GOTO(WHILEM_B_min, ST.save_curlyx->u.curlyx.B,
         locinput);
    /* NOTREACHED */
    assert(0);
   }

   /* Prefer A over B for maximal matching. */

   if (n < max) { /* More greed allowed? */
    ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
       maxopenparen);
    cur_curlyx->u.curlyx.lastloc = locinput;
    REGCP_SET(ST.lastcp);
    PUSH_STATE_GOTO(WHILEM_A_max, A, locinput);
    /* NOTREACHED */
    assert(0);
   }
   goto do_whilem_B_max;
  }
  /* NOTREACHED */
  assert(0);

  case WHILEM_B_min: /* just matched B in a minimal match */
  case WHILEM_B_max: /* just matched B in a maximal match */
   cur_curlyx = ST.save_curlyx;
   sayYES;
   /* NOTREACHED */
   assert(0);

  case WHILEM_B_max_fail: /* just failed to match B in a maximal match */
   cur_curlyx = ST.save_curlyx;
   cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
   cur_curlyx->u.curlyx.count--;
   CACHEsayNO;
   /* NOTREACHED */
   assert(0);

  case WHILEM_A_min_fail: /* just failed to match A in a minimal match */
   /* FALLTHROUGH */
  case WHILEM_A_pre_fail: /* just failed to match even minimal A */
   REGCP_UNWIND(ST.lastcp);
   regcppop(rex, &maxopenparen);
   cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
   cur_curlyx->u.curlyx.count--;
   CACHEsayNO;
   /* NOTREACHED */
   assert(0);

  case WHILEM_A_max_fail: /* just failed to match A in a maximal match */
   REGCP_UNWIND(ST.lastcp);
   regcppop(rex, &maxopenparen); /* Restore some previous $<digit>s? */
   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
    "%*s  whilem: failed, trying continuation...\n",
    REPORT_CODE_OFF+depth*2, "")
   );
  do_whilem_B_max:
   if (cur_curlyx->u.curlyx.count >= REG_INFTY
    && ckWARN(WARN_REGEXP)
    && !reginfo->warned)
   {
    reginfo->warned = TRUE;
    Perl_warner(aTHX_ packWARN(WARN_REGEXP),
     "Complex regular subexpression recursion limit (%d) "
     "exceeded",
     REG_INFTY - 1);
   }

   /* now try B */
   ST.save_curlyx = cur_curlyx;
   cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
   PUSH_YES_STATE_GOTO(WHILEM_B_max, ST.save_curlyx->u.curlyx.B,
        locinput);
   /* NOTREACHED */
   assert(0);

  case WHILEM_B_min_fail: /* just failed to match B in a minimal match */
   cur_curlyx = ST.save_curlyx;
   REGCP_UNWIND(ST.lastcp);
   regcppop(rex, &maxopenparen);

   if (cur_curlyx->u.curlyx.count >= /*max*/ARG2(cur_curlyx->u.curlyx.me)) {
    /* Maximum greed exceeded */
    if (cur_curlyx->u.curlyx.count >= REG_INFTY
     && ckWARN(WARN_REGEXP)
     && !reginfo->warned)
    {
     reginfo->warned = TRUE;
     Perl_warner(aTHX_ packWARN(WARN_REGEXP),
      "Complex regular subexpression recursion "
      "limit (%d) exceeded",
      REG_INFTY - 1);
    }
    cur_curlyx->u.curlyx.count--;
    CACHEsayNO;
   }

   DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
    "%*s  trying longer...\n", REPORT_CODE_OFF+depth*2, "")
   );
   /* Try grabbing another A and see if it helps. */
   cur_curlyx->u.curlyx.lastloc = locinput;
   ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
       maxopenparen);
   REGCP_SET(ST.lastcp);
   PUSH_STATE_GOTO(WHILEM_A_min,
    /*A*/ NEXTOPER(ST.save_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS,
    locinput);
   /* NOTREACHED */
   assert(0);

#undef  ST
#define ST st->u.branch

  case BRANCHJ:     /*  /(...|A|...)/ with long next pointer */
   next = scan + ARG(scan);
   if (next == scan)
    next = NULL;
   scan = NEXTOPER(scan);
   /* FALLTHROUGH */

  case BRANCH:     /*  /(...|A|...)/ */
   scan = NEXTOPER(scan); /* scan now points to inner node */
   ST.lastparen = rex->lastparen;
   ST.lastcloseparen = rex->lastcloseparen;
   ST.next_branch = next;
   REGCP_SET(ST.cp);

   /* Now go into the branch */
   if (has_cutgroup) {
    PUSH_YES_STATE_GOTO(BRANCH_next, scan, locinput);
   } else {
    PUSH_STATE_GOTO(BRANCH_next, scan, locinput);
   }
   /* NOTREACHED */
   assert(0);

  case CUTGROUP:  /*  /(*THEN)/  */
   sv_yes_mark = st->u.mark.mark_name = scan->flags ? NULL :
    MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
   PUSH_STATE_GOTO(CUTGROUP_next, next, locinput);
   /* NOTREACHED */
   assert(0);

  case CUTGROUP_next_fail:
   do_cutgroup = 1;
   no_final = 1;
   if (st->u.mark.mark_name)
    sv_commit = st->u.mark.mark_name;
   sayNO;
   /* NOTREACHED */
   assert(0);

  case BRANCH_next:
   sayYES;
   /* NOTREACHED */
   assert(0);

  case BRANCH_next_fail: /* that branch failed; try the next, if any */
   if (do_cutgroup) {
    do_cutgroup = 0;
    no_final = 0;
   }
   REGCP_UNWIND(ST.cp);
   UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
   scan = ST.next_branch;
   /* no more branches? */
   if (!scan || (OP(scan) != BRANCH && OP(scan) != BRANCHJ)) {
    DEBUG_EXECUTE_r({
     PerlIO_printf( Perl_debug_log,
      "%*s  %sBRANCH failed...%s\n",
      REPORT_CODE_OFF+depth*2, "",
      PL_colors[4],
      PL_colors[5] );
    });
    sayNO_SILENT;
   }
   continue; /* execute next BRANCH[J] op */
   /* NOTREACHED */
   assert(0);

  case MINMOD: /* next op will be non-greedy, e.g. A*?  */
   minmod = 1;
   break;

#undef  ST
#define ST st->u.curlym

  case CURLYM: /* /A{m,n}B/ where A is fixed-length */

   /* This is an optimisation of CURLYX that enables us to push
   * only a single backtracking state, no matter how many matches
   * there are in {m,n}. It relies on the pattern being constant
   * length, with no parens to influence future backrefs
   */

   ST.me = scan;
   scan = NEXTOPER(scan) + NODE_STEP_REGNODE;

   ST.lastparen      = rex->lastparen;
   ST.lastcloseparen = rex->lastcloseparen;

   /* if paren positive, emulate an OPEN/CLOSE around A */
   if (ST.me->flags) {
    U32 paren = ST.me->flags;
    if (paren > maxopenparen)
     maxopenparen = paren;
    scan += NEXT_OFF(scan); /* Skip former OPEN. */
   }
   ST.A = scan;
   ST.B = next;
   ST.alen = 0;
   ST.count = 0;
   ST.minmod = minmod;
   minmod = 0;
   ST.c1 = CHRTEST_UNINIT;
   REGCP_SET(ST.cp);

   if (!(ST.minmod ? ARG1(ST.me) : ARG2(ST.me))) /* min/max */
    goto curlym_do_B;

  curlym_do_A: /* execute the A in /A{m,n}B/  */
   PUSH_YES_STATE_GOTO(CURLYM_A, ST.A, locinput); /* match A */
   /* NOTREACHED */
   assert(0);

  case CURLYM_A: /* we've just matched an A */
   ST.count++;
   /* after first match, determine A's length: u.curlym.alen */
   if (ST.count == 1) {
    if (reginfo->is_utf8_target) {
     char *s = st->locinput;
     while (s < locinput) {
      ST.alen++;
      s += UTF8SKIP(s);
     }
    }
    else {
     ST.alen = locinput - st->locinput;
    }
    if (ST.alen == 0)
     ST.count = ST.minmod ? ARG1(ST.me) : ARG2(ST.me);
   }
   DEBUG_EXECUTE_r(
    PerlIO_printf(Perl_debug_log,
      "%*s  CURLYM now matched %"IVdf" times, len=%"IVdf"...\n",
      (int)(REPORT_CODE_OFF+(depth*2)), "",
      (IV) ST.count, (IV)ST.alen)
   );

   if (cur_eval && cur_eval->u.eval.close_paren &&
    cur_eval->u.eval.close_paren == (U32)ST.me->flags)
    goto fake_end;

   {
    I32 max = (ST.minmod ? ARG1(ST.me) : ARG2(ST.me));
    if ( max == REG_INFTY || ST.count < max )
     goto curlym_do_A; /* try to match another A */
   }
   goto curlym_do_B; /* try to match B */

  case CURLYM_A_fail: /* just failed to match an A */
   REGCP_UNWIND(ST.cp);

   if (ST.minmod || ST.count < ARG1(ST.me) /* min*/
    || (cur_eval && cur_eval->u.eval.close_paren &&
     cur_eval->u.eval.close_paren == (U32)ST.me->flags))
    sayNO;

  curlym_do_B: /* execute the B in /A{m,n}B/  */
   if (ST.c1 == CHRTEST_UNINIT) {
    /* calculate c1 and c2 for possible match of 1st char
    * following curly */
    ST.c1 = ST.c2 = CHRTEST_VOID;
    assert(ST.B);
    if (HAS_TEXT(ST.B) || JUMPABLE(ST.B)) {
     regnode *text_node = ST.B;
     if (! HAS_TEXT(text_node))
      FIND_NEXT_IMPT(text_node);
     /* this used to be

      (HAS_TEXT(text_node) && PL_regkind[OP(text_node)] == EXACT)

       But the former is redundant in light of the latter.

       if this changes back then the macro for
       IS_TEXT and friends need to change.
     */
     if (PL_regkind[OP(text_node)] == EXACT) {
      if (! S_setup_EXACTISH_ST_c1_c2(aTHX_
      text_node, &ST.c1, ST.c1_utf8, &ST.c2, ST.c2_utf8,
      reginfo))
      {
       sayNO;
      }
     }
    }
   }

   DEBUG_EXECUTE_r(
    PerlIO_printf(Perl_debug_log,
     "%*s  CURLYM trying tail with matches=%"IVdf"...\n",
     (int)(REPORT_CODE_OFF+(depth*2)),
     "", (IV)ST.count)
    );
   if (! NEXTCHR_IS_EOS && ST.c1 != CHRTEST_VOID) {
    if (! UTF8_IS_INVARIANT(nextchr) && utf8_target) {
     if (memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput))
      && memNE(locinput, ST.c2_utf8, UTF8SKIP(locinput)))
     {
      /* simulate B failing */
      DEBUG_OPTIMISE_r(
       PerlIO_printf(Perl_debug_log,
        "%*s  CURLYM Fast bail next target=0x%"UVXf" c1=0x%"UVXf" c2=0x%"UVXf"\n",
        (int)(REPORT_CODE_OFF+(depth*2)),"",
        valid_utf8_to_uvchr((U8 *) locinput, NULL),
        valid_utf8_to_uvchr(ST.c1_utf8, NULL),
        valid_utf8_to_uvchr(ST.c2_utf8, NULL))
      );
      state_num = CURLYM_B_fail;
      goto reenter_switch;
     }
    }
    else if (nextchr != ST.c1 && nextchr != ST.c2) {
     /* simulate B failing */
     DEBUG_OPTIMISE_r(
      PerlIO_printf(Perl_debug_log,
       "%*s  CURLYM Fast bail next target=0x%X c1=0x%X c2=0x%X\n",
       (int)(REPORT_CODE_OFF+(depth*2)),"",
       (int) nextchr, ST.c1, ST.c2)
     );
     state_num = CURLYM_B_fail;
     goto reenter_switch;
    }
   }

   if (ST.me->flags) {
    /* emulate CLOSE: mark current A as captured */
    I32 paren = ST.me->flags;
    if (ST.count) {
     rex->offs[paren].start
      = HOPc(locinput, -ST.alen) - reginfo->strbeg;
     rex->offs[paren].end = locinput - reginfo->strbeg;
     if ((U32)paren > rex->lastparen)
      rex->lastparen = paren;
     rex->lastcloseparen = paren;
    }
    else
     rex->offs[paren].end = -1;
    if (cur_eval && cur_eval->u.eval.close_paren &&
     cur_eval->u.eval.close_paren == (U32)ST.me->flags)
    {
     if (ST.count)
      goto fake_end;
     else
      sayNO;
    }
   }

   PUSH_STATE_GOTO(CURLYM_B, ST.B, locinput); /* match B */
   /* NOTREACHED */
   assert(0);

  case CURLYM_B_fail: /* just failed to match a B */
   REGCP_UNWIND(ST.cp);
   UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
   if (ST.minmod) {
    I32 max = ARG2(ST.me);
    if (max != REG_INFTY && ST.count == max)
     sayNO;
    goto curlym_do_A; /* try to match a further A */
   }
   /* backtrack one A */
   if (ST.count == ARG1(ST.me) /* min */)
    sayNO;
   ST.count--;
   SET_locinput(HOPc(locinput, -ST.alen));
   goto curlym_do_B; /* try to match B */

#undef ST
#define ST st->u.curly

#define CURLY_SETPAREN(paren, success) \
 if (paren) { \
  if (success) { \
   rex->offs[paren].start = HOPc(locinput, -1) - reginfo->strbeg; \
   rex->offs[paren].end = locinput - reginfo->strbeg; \
   if (paren > rex->lastparen) \
    rex->lastparen = paren; \
   rex->lastcloseparen = paren; \
  } \
  else { \
   rex->offs[paren].end = -1; \
   rex->lastparen      = ST.lastparen; \
   rex->lastcloseparen = ST.lastcloseparen; \
  } \
 }

  case STAR:  /*  /A*B/ where A is width 1 char */
   ST.paren = 0;
   ST.min = 0;
   ST.max = REG_INFTY;
   scan = NEXTOPER(scan);
   goto repeat;

  case PLUS:  /*  /A+B/ where A is width 1 char */
   ST.paren = 0;
   ST.min = 1;
   ST.max = REG_INFTY;
   scan = NEXTOPER(scan);
   goto repeat;

  case CURLYN:  /*  /(A){m,n}B/ where A is width 1 char */
   ST.paren = scan->flags; /* Which paren to set */
   ST.lastparen      = rex->lastparen;
   ST.lastcloseparen = rex->lastcloseparen;
   if (ST.paren > maxopenparen)
    maxopenparen = ST.paren;
   ST.min = ARG1(scan);  /* min to match */
   ST.max = ARG2(scan);  /* max to match */
   if (cur_eval && cur_eval->u.eval.close_paren &&
    cur_eval->u.eval.close_paren == (U32)ST.paren) {
    ST.min=1;
    ST.max=1;
   }
   scan = regnext(NEXTOPER(scan) + NODE_STEP_REGNODE);
   goto repeat;

  case CURLY:  /*  /A{m,n}B/ where A is width 1 char */
   ST.paren = 0;
   ST.min = ARG1(scan);  /* min to match */
   ST.max = ARG2(scan);  /* max to match */
   scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
  repeat:
   /*
   * Lookahead to avoid useless match attempts
   * when we know what character comes next.
   *
   * Used to only do .*x and .*?x, but now it allows
   * for )'s, ('s and (?{ ... })'s to be in the way
   * of the quantifier and the EXACT-like node.  -- japhy
   */

   assert(ST.min <= ST.max);
   if (! HAS_TEXT(next) && ! JUMPABLE(next)) {
    ST.c1 = ST.c2 = CHRTEST_VOID;
   }
   else {
    regnode *text_node = next;

    if (! HAS_TEXT(text_node))
     FIND_NEXT_IMPT(text_node);

    if (! HAS_TEXT(text_node))
     ST.c1 = ST.c2 = CHRTEST_VOID;
    else {
     if ( PL_regkind[OP(text_node)] != EXACT ) {
      ST.c1 = ST.c2 = CHRTEST_VOID;
     }
     else {

     /*  Currently we only get here when

      PL_rekind[OP(text_node)] == EXACT

      if this changes back then the macro for IS_TEXT and
      friends need to change. */
      if (! S_setup_EXACTISH_ST_c1_c2(aTHX_
      text_node, &ST.c1, ST.c1_utf8, &ST.c2, ST.c2_utf8,
      reginfo))
      {
       sayNO;
      }
     }
    }
   }

   ST.A = scan;
   ST.B = next;
   if (minmod) {
    char *li = locinput;
    minmod = 0;
    if (ST.min &&
      regrepeat(rex, &li, ST.A, reginfo, ST.min, depth)
       < ST.min)
     sayNO;
    SET_locinput(li);
    ST.count = ST.min;
    REGCP_SET(ST.cp);
    if (ST.c1 == CHRTEST_VOID)
     goto curly_try_B_min;

    ST.oldloc = locinput;

    /* set ST.maxpos to the furthest point along the
    * string that could possibly match */
    if  (ST.max == REG_INFTY) {
     ST.maxpos = reginfo->strend - 1;
     if (utf8_target)
      while (UTF8_IS_CONTINUATION(*(U8*)ST.maxpos))
       ST.maxpos--;
    }
    else if (utf8_target) {
     int m = ST.max - ST.min;
     for (ST.maxpos = locinput;
      m >0 && ST.maxpos < reginfo->strend; m--)
      ST.maxpos += UTF8SKIP(ST.maxpos);
    }
    else {
     ST.maxpos = locinput + ST.max - ST.min;
     if (ST.maxpos >= reginfo->strend)
      ST.maxpos = reginfo->strend - 1;
    }
    goto curly_try_B_min_known;

   }
   else {
    /* avoid taking address of locinput, so it can remain
    * a register var */
    char *li = locinput;
    ST.count = regrepeat(rex, &li, ST.A, reginfo, ST.max, depth);
    if (ST.count < ST.min)
     sayNO;
    SET_locinput(li);
    if ((ST.count > ST.min)
     && (PL_regkind[OP(ST.B)] == EOL) && (OP(ST.B) != MEOL))
    {
     /* A{m,n} must come at the end of the string, there's
     * no point in backing off ... */
     ST.min = ST.count;
     /* ...except that $ and \Z can match before *and* after
     newline at the end.  Consider "\n\n" =~ /\n+\Z\n/.
     We may back off by one in this case. */
     if (UCHARAT(locinput - 1) == '\n' && OP(ST.B) != EOS)
      ST.min--;
    }
    REGCP_SET(ST.cp);
    goto curly_try_B_max;
   }
   /* NOTREACHED */
   assert(0);

  case CURLY_B_min_known_fail:
   /* failed to find B in a non-greedy match where c1,c2 valid */

   REGCP_UNWIND(ST.cp);
   if (ST.paren) {
    UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
   }
   /* Couldn't or didn't -- move forward. */
   ST.oldloc = locinput;
   if (utf8_target)
    locinput += UTF8SKIP(locinput);
   else
    locinput++;
   ST.count++;
  curly_try_B_min_known:
   /* find the next place where 'B' could work, then call B */
   {
    int n;
    if (utf8_target) {
     n = (ST.oldloc == locinput) ? 0 : 1;
     if (ST.c1 == ST.c2) {
      /* set n to utf8_distance(oldloc, locinput) */
      while (locinput <= ST.maxpos
       && memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput)))
      {
       locinput += UTF8SKIP(locinput);
       n++;
      }
     }
     else {
      /* set n to utf8_distance(oldloc, locinput) */
      while (locinput <= ST.maxpos
       && memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput))
       && memNE(locinput, ST.c2_utf8, UTF8SKIP(locinput)))
      {
       locinput += UTF8SKIP(locinput);
       n++;
      }
     }
    }
    else {  /* Not utf8_target */
     if (ST.c1 == ST.c2) {
      while (locinput <= ST.maxpos &&
       UCHARAT(locinput) != ST.c1)
       locinput++;
     }
     else {
      while (locinput <= ST.maxpos
       && UCHARAT(locinput) != ST.c1
       && UCHARAT(locinput) != ST.c2)
       locinput++;
     }
     n = locinput - ST.oldloc;
    }
    if (locinput > ST.maxpos)
     sayNO;
    if (n) {
     /* In /a{m,n}b/, ST.oldloc is at "a" x m, locinput is
     * at b; check that everything between oldloc and
     * locinput matches */
     char *li = ST.oldloc;
     ST.count += n;
     if (regrepeat(rex, &li, ST.A, reginfo, n, depth) < n)
      sayNO;
     assert(n == REG_INFTY || locinput == li);
    }
    CURLY_SETPAREN(ST.paren, ST.count);
    if (cur_eval && cur_eval->u.eval.close_paren &&
     cur_eval->u.eval.close_paren == (U32)ST.paren) {
     goto fake_end;
    }
    PUSH_STATE_GOTO(CURLY_B_min_known, ST.B, locinput);
   }
   /* NOTREACHED */
   assert(0);

  case CURLY_B_min_fail:
   /* failed to find B in a non-greedy match where c1,c2 invalid */

   REGCP_UNWIND(ST.cp);
   if (ST.paren) {
    UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
   }
   /* failed -- move forward one */
   {
    char *li = locinput;
    if (!regrepeat(rex, &li, ST.A, reginfo, 1, depth)) {
     sayNO;
    }
    locinput = li;
   }
   {
    ST.count++;
    if (ST.count <= ST.max || (ST.max == REG_INFTY &&
      ST.count > 0)) /* count overflow ? */
    {
    curly_try_B_min:
     CURLY_SETPAREN(ST.paren, ST.count);
     if (cur_eval && cur_eval->u.eval.close_paren &&
      cur_eval->u.eval.close_paren == (U32)ST.paren) {
      goto fake_end;
     }
     PUSH_STATE_GOTO(CURLY_B_min, ST.B, locinput);
    }
   }
   sayNO;
   /* NOTREACHED */
   assert(0);

  curly_try_B_max:
   /* a successful greedy match: now try to match B */
   if (cur_eval && cur_eval->u.eval.close_paren &&
    cur_eval->u.eval.close_paren == (U32)ST.paren) {
    goto fake_end;
   }
   {
    bool could_match = locinput < reginfo->strend;

    /* If it could work, try it. */
    if (ST.c1 != CHRTEST_VOID && could_match) {
     if (! UTF8_IS_INVARIANT(UCHARAT(locinput)) && utf8_target)
     {
      could_match = memEQ(locinput,
           ST.c1_utf8,
           UTF8SKIP(locinput))
         || memEQ(locinput,
           ST.c2_utf8,
           UTF8SKIP(locinput));
     }
     else {
      could_match = UCHARAT(locinput) == ST.c1
         || UCHARAT(locinput) == ST.c2;
     }
    }
    if (ST.c1 == CHRTEST_VOID || could_match) {
     CURLY_SETPAREN(ST.paren, ST.count);
     PUSH_STATE_GOTO(CURLY_B_max, ST.B, locinput);
     /* NOTREACHED */
     assert(0);
    }
   }
   /* FALLTHROUGH */

  case CURLY_B_max_fail:
   /* failed to find B in a greedy match */

   REGCP_UNWIND(ST.cp);
   if (ST.paren) {
    UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
   }
   /*  back up. */
   if (--ST.count < ST.min)
    sayNO;
   locinput = HOPc(locinput, -1);
   goto curly_try_B_max;

#undef ST

  case END: /*  last op of main pattern  */
   fake_end:
   if (cur_eval) {
    /* we've just finished A in /(??{A})B/; now continue with B */

    st->u.eval.prev_rex = rex_sv;  /* inner */

    /* Save *all* the positions. */
    st->u.eval.cp = regcppush(rex, 0, maxopenparen);
    rex_sv = cur_eval->u.eval.prev_rex;
    is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
    SET_reg_curpm(rex_sv);
    rex = ReANY(rex_sv);
    rexi = RXi_GET(rex);
    cur_curlyx = cur_eval->u.eval.prev_curlyx;

    REGCP_SET(st->u.eval.lastcp);

    /* Restore parens of the outer rex without popping the
    * savestack */
    S_regcp_restore(aTHX_ rex, cur_eval->u.eval.lastcp,
          &maxopenparen);

    st->u.eval.prev_eval = cur_eval;
    cur_eval = cur_eval->u.eval.prev_eval;
    DEBUG_EXECUTE_r(
     PerlIO_printf(Perl_debug_log, "%*s  EVAL trying tail ... %"UVxf"\n",
         REPORT_CODE_OFF+depth*2, "",PTR2UV(cur_eval)););
    if ( nochange_depth )
     nochange_depth--;

    PUSH_YES_STATE_GOTO(EVAL_AB, st->u.eval.prev_eval->u.eval.B,
         locinput); /* match B */
   }

   if (locinput < reginfo->till) {
    DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
         "%sMatch possible, but length=%ld is smaller than requested=%ld, failing!%s\n",
         PL_colors[4],
         (long)(locinput - startpos),
         (long)(reginfo->till - startpos),
         PL_colors[5]));

    sayNO_SILENT;  /* Cannot match: too short. */
   }
   sayYES;   /* Success! */

  case SUCCEED: /* successful SUSPEND/UNLESSM/IFMATCH/CURLYM */
   DEBUG_EXECUTE_r(
   PerlIO_printf(Perl_debug_log,
    "%*s  %ssubpattern success...%s\n",
    REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5]));
   sayYES;   /* Success! */

#undef  ST
#define ST st->u.ifmatch

  {
   char *newstart;

  case SUSPEND: /* (?>A) */
   ST.wanted = 1;
   newstart = locinput;
   goto do_ifmatch;

  case UNLESSM: /* -ve lookaround: (?!A), or with flags, (?<!A) */
   ST.wanted = 0;
   goto ifmatch_trivial_fail_test;

  case IFMATCH: /* +ve lookaround: (?=A), or with flags, (?<=A) */
   ST.wanted = 1;
  ifmatch_trivial_fail_test:
   if (scan->flags) {
    char * const s = HOPBACKc(locinput, scan->flags);
    if (!s) {
     /* trivial fail */
     if (logical) {
      logical = 0;
      sw = 1 - cBOOL(ST.wanted);
     }
     else if (ST.wanted)
      sayNO;
     next = scan + ARG(scan);
     if (next == scan)
      next = NULL;
     break;
    }
    newstart = s;
   }
   else
    newstart = locinput;

  do_ifmatch:
   ST.me = scan;
   ST.logical = logical;
   logical = 0; /* XXX: reset state of logical once it has been saved into ST */

   /* execute body of (?...A) */
   PUSH_YES_STATE_GOTO(IFMATCH_A, NEXTOPER(NEXTOPER(scan)), newstart);
   /* NOTREACHED */
   assert(0);
  }

  case IFMATCH_A_fail: /* body of (?...A) failed */
   ST.wanted = !ST.wanted;
   /* FALLTHROUGH */

  case IFMATCH_A: /* body of (?...A) succeeded */
   if (ST.logical) {
    sw = cBOOL(ST.wanted);
   }
   else if (!ST.wanted)
    sayNO;

   if (OP(ST.me) != SUSPEND) {
    /* restore old position except for (?>...) */
    locinput = st->locinput;
   }
   scan = ST.me + ARG(ST.me);
   if (scan == ST.me)
    scan = NULL;
   continue; /* execute B */

#undef ST

  case LONGJMP: /*  alternative with many branches compiles to
     * (BRANCHJ; EXACT ...; LONGJMP ) x N */
   next = scan + ARG(scan);
   if (next == scan)
    next = NULL;
   break;

  case COMMIT:  /*  (*COMMIT)  */
   reginfo->cutpoint = reginfo->strend;
   /* FALLTHROUGH */

  case PRUNE:   /*  (*PRUNE)   */
   if (!scan->flags)
    sv_yes_mark = sv_commit = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
   PUSH_STATE_GOTO(COMMIT_next, next, locinput);
   /* NOTREACHED */
   assert(0);

  case COMMIT_next_fail:
   no_final = 1;
   /* FALLTHROUGH */

  case OPFAIL:   /* (*FAIL)  */
   sayNO;
   /* NOTREACHED */
   assert(0);

#define ST st->u.mark
  case MARKPOINT: /*  (*MARK:foo)  */
   ST.prev_mark = mark_state;
   ST.mark_name = sv_commit = sv_yes_mark
    = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
   mark_state = st;
   ST.mark_loc = locinput;
   PUSH_YES_STATE_GOTO(MARKPOINT_next, next, locinput);
   /* NOTREACHED */
   assert(0);

  case MARKPOINT_next:
   mark_state = ST.prev_mark;
   sayYES;
   /* NOTREACHED */
   assert(0);

  case MARKPOINT_next_fail:
   if (popmark && sv_eq(ST.mark_name,popmark))
   {
    if (ST.mark_loc > startpoint)
     reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
    popmark = NULL; /* we found our mark */
    sv_commit = ST.mark_name;

    DEBUG_EXECUTE_r({
      PerlIO_printf(Perl_debug_log,
       "%*s  %ssetting cutpoint to mark:%"SVf"...%s\n",
       REPORT_CODE_OFF+depth*2, "",
       PL_colors[4], SVfARG(sv_commit), PL_colors[5]);
    });
   }
   mark_state = ST.prev_mark;
   sv_yes_mark = mark_state ?
    mark_state->u.mark.mark_name : NULL;
   sayNO;
   /* NOTREACHED */
   assert(0);

  case SKIP:  /*  (*SKIP)  */
   if (scan->flags) {
    /* (*SKIP) : if we fail we cut here*/
    ST.mark_name = NULL;
    ST.mark_loc = locinput;
    PUSH_STATE_GOTO(SKIP_next,next, locinput);
   } else {
    /* (*SKIP:NAME) : if there is a (*MARK:NAME) fail where it was,
    otherwise do nothing.  Meaning we need to scan
    */
    regmatch_state *cur = mark_state;
    SV *find = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);

    while (cur) {
     if ( sv_eq( cur->u.mark.mark_name,
        find ) )
     {
      ST.mark_name = find;
      PUSH_STATE_GOTO( SKIP_next, next, locinput);
     }
     cur = cur->u.mark.prev_mark;
    }
   }
   /* Didn't find our (*MARK:NAME) so ignore this (*SKIP:NAME) */
   break;

  case SKIP_next_fail:
   if (ST.mark_name) {
    /* (*CUT:NAME) - Set up to search for the name as we
    collapse the stack*/
    popmark = ST.mark_name;
   } else {
    /* (*CUT) - No name, we cut here.*/
    if (ST.mark_loc > startpoint)
     reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
    /* but we set sv_commit to latest mark_name if there
    is one so they can test to see how things lead to this
    cut */
    if (mark_state)
     sv_commit=mark_state->u.mark.mark_name;
   }
   no_final = 1;
   sayNO;
   /* NOTREACHED */
   assert(0);
#undef ST

  case LNBREAK: /* \R */
   if ((n=is_LNBREAK_safe(locinput, reginfo->strend, utf8_target))) {
    locinput += n;
   } else
    sayNO;
   break;

  default:
   PerlIO_printf(Perl_error_log, "%"UVxf" %d\n",
      PTR2UV(scan), OP(scan));
   Perl_croak(aTHX_ "regexp memory corruption");

  /* this is a point to jump to in order to increment
  * locinput by one character */
  increment_locinput:
   assert(!NEXTCHR_IS_EOS);
   if (utf8_target) {
    locinput += PL_utf8skip[nextchr];
    /* locinput is allowed to go 1 char off the end, but not 2+ */
    if (locinput > reginfo->strend)
     sayNO;
   }
   else
    locinput++;
   break;

  } /* end switch */

  /* switch break jumps here */
  scan = next; /* prepare to execute the next op and ... */
  continue;    /* ... jump back to the top, reusing st */
  /* NOTREACHED */
  assert(0);

 push_yes_state:
  /* push a state that backtracks on success */
  st->u.yes.prev_yes_state = yes_state;
  yes_state = st;
  /* FALLTHROUGH */
 push_state:
  /* push a new regex state, then continue at scan  */
  {
   regmatch_state *newst;

   DEBUG_STACK_r({
    regmatch_state *cur = st;
    regmatch_state *curyes = yes_state;
    int curd = depth;
    regmatch_slab *slab = PL_regmatch_slab;
    for (;curd > -1;cur--,curd--) {
     if (cur < SLAB_FIRST(slab)) {
      slab = slab->prev;
      cur = SLAB_LAST(slab);
     }
     PerlIO_printf(Perl_error_log, "%*s#%-3d %-10s %s\n",
      REPORT_CODE_OFF + 2 + depth * 2,"",
      curd, PL_reg_name[cur->resume_state],
      (curyes == cur) ? "yes" : ""
     );
     if (curyes == cur)
      curyes = cur->u.yes.prev_yes_state;
    }
   } else
    DEBUG_STATE_pp("push")
   );
   depth++;
   st->locinput = locinput;
   newst = st+1;
   if (newst >  SLAB_LAST(PL_regmatch_slab))
    newst = S_push_slab(aTHX);
   PL_regmatch_state = newst;

   locinput = pushinput;
   st = newst;
   continue;
   /* NOTREACHED */
   assert(0);
  }
 }

 /*
 * We get here only if there's trouble -- normally "case END" is
 * the terminating point.
 */
 Perl_croak(aTHX_ "corrupted regexp pointers");
 /* NOTREACHED */
 sayNO;

yes:
 if (yes_state) {
  /* we have successfully completed a subexpression, but we must now
  * pop to the state marked by yes_state and continue from there */
  assert(st != yes_state);
#ifdef DEBUGGING
  while (st != yes_state) {
   st--;
   if (st < SLAB_FIRST(PL_regmatch_slab)) {
    PL_regmatch_slab = PL_regmatch_slab->prev;
    st = SLAB_LAST(PL_regmatch_slab);
   }
   DEBUG_STATE_r({
    if (no_final) {
     DEBUG_STATE_pp("pop (no final)");
    } else {
     DEBUG_STATE_pp("pop (yes)");
    }
   });
   depth--;
  }
#else
  while (yes_state < SLAB_FIRST(PL_regmatch_slab)
   || yes_state > SLAB_LAST(PL_regmatch_slab))
  {
   /* not in this slab, pop slab */
   depth -= (st - SLAB_FIRST(PL_regmatch_slab) + 1);
   PL_regmatch_slab = PL_regmatch_slab->prev;
   st = SLAB_LAST(PL_regmatch_slab);
  }
  depth -= (st - yes_state);
#endif
  st = yes_state;
  yes_state = st->u.yes.prev_yes_state;
  PL_regmatch_state = st;

  if (no_final)
   locinput= st->locinput;
  state_num = st->resume_state + no_final;
  goto reenter_switch;
 }

 DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch successful!%s\n",
      PL_colors[4], PL_colors[5]));

 if (reginfo->info_aux_eval) {
  /* each successfully executed (?{...}) block does the equivalent of
  *   local $^R = do {...}
  * When popping the save stack, all these locals would be undone;
  * bypass this by setting the outermost saved $^R to the latest
  * value */
  /* I dont know if this is needed or works properly now.
  * see code related to PL_replgv elsewhere in this file.
  * Yves
  */
  if (oreplsv != GvSV(PL_replgv))
   sv_setsv(oreplsv, GvSV(PL_replgv));
 }
 result = 1;
 goto final_exit;

no:
 DEBUG_EXECUTE_r(
  PerlIO_printf(Perl_debug_log,
   "%*s  %sfailed...%s\n",
   REPORT_CODE_OFF+depth*2, "",
   PL_colors[4], PL_colors[5])
  );

no_silent:
 if (no_final) {
  if (yes_state) {
   goto yes;
  } else {
   goto final_exit;
  }
 }
 if (depth) {
  /* there's a previous state to backtrack to */
  st--;
  if (st < SLAB_FIRST(PL_regmatch_slab)) {
   PL_regmatch_slab = PL_regmatch_slab->prev;
   st = SLAB_LAST(PL_regmatch_slab);
  }
  PL_regmatch_state = st;
  locinput= st->locinput;

  DEBUG_STATE_pp("pop");
  depth--;
  if (yes_state == st)
   yes_state = st->u.yes.prev_yes_state;

  state_num = st->resume_state + 1; /* failure = success + 1 */
  goto reenter_switch;
 }
 result = 0;

  final_exit:
 if (rex->intflags & PREGf_VERBARG_SEEN) {
  SV *sv_err = get_sv("REGERROR", 1);
  SV *sv_mrk = get_sv("REGMARK", 1);
  if (result) {
   sv_commit = &PL_sv_no;
   if (!sv_yes_mark)
    sv_yes_mark = &PL_sv_yes;
  } else {
   if (!sv_commit)
    sv_commit = &PL_sv_yes;
   sv_yes_mark = &PL_sv_no;
  }
  assert(sv_err);
  assert(sv_mrk);
  sv_setsv(sv_err, sv_commit);
  sv_setsv(sv_mrk, sv_yes_mark);
 }


 if (last_pushed_cv) {
  dSP;
  POP_MULTICALL;
  PERL_UNUSED_VAR(SP);
 }

 assert(!result ||  locinput - reginfo->strbeg >= 0);
 return result ?  locinput - reginfo->strbeg : -1;
}

/*
 - regrepeat - repeatedly match something simple, report how many
 *
 * What 'simple' means is a node which can be the operand of a quantifier like
 * '+', or {1,3}
 *
 * startposp - pointer a pointer to the start position.  This is updated
 *             to point to the byte following the highest successful
 *             match.
 * p         - the regnode to be repeatedly matched against.
 * reginfo   - struct holding match state, such as strend
 * max       - maximum number of things to match.
 * depth     - (for debugging) backtracking depth.
 */
STATIC I32
S_regrepeat(pTHX_ regexp *prog, char **startposp, const regnode *p,
   regmatch_info *const reginfo, I32 max, int depth)
{
 char *scan;     /* Pointer to current position in target string */
 I32 c;
 char *loceol = reginfo->strend;   /* local version */
 I32 hardcount = 0;  /* How many matches so far */
 bool utf8_target = reginfo->is_utf8_target;
 int to_complement = 0;  /* Invert the result? */
 UV utf8_flags;
 _char_class_number classnum;
#ifndef DEBUGGING
 PERL_UNUSED_ARG(depth);
#endif

 PERL_ARGS_ASSERT_REGREPEAT;

 scan = *startposp;
 if (max == REG_INFTY)
  max = I32_MAX;
 else if (! utf8_target && loceol - scan > max)
  loceol = scan + max;

 /* Here, for the case of a non-UTF-8 target we have adjusted <loceol> down
 * to the maximum of how far we should go in it (leaving it set to the real
 * end, if the maximum permissible would take us beyond that).  This allows
 * us to make the loop exit condition that we haven't gone past <loceol> to
 * also mean that we haven't exceeded the max permissible count, saving a
 * test each time through the loop.  But it assumes that the OP matches a
 * single byte, which is true for most of the OPs below when applied to a
 * non-UTF-8 target.  Those relatively few OPs that don't have this
 * characteristic will have to compensate.
 *
 * There is no adjustment for UTF-8 targets, as the number of bytes per
 * character varies.  OPs will have to test both that the count is less
 * than the max permissible (using <hardcount> to keep track), and that we
 * are still within the bounds of the string (using <loceol>.  A few OPs
 * match a single byte no matter what the encoding.  They can omit the max
 * test if, for the UTF-8 case, they do the adjustment that was skipped
 * above.
 *
 * Thus, the code above sets things up for the common case; and exceptional
 * cases need extra work; the common case is to make sure <scan> doesn't
 * go past <loceol>, and for UTF-8 to also use <hardcount> to make sure the
 * count doesn't exceed the maximum permissible */

 switch (OP(p)) {
 case REG_ANY:
  if (utf8_target) {
   while (scan < loceol && hardcount < max && *scan != '\n') {
    scan += UTF8SKIP(scan);
    hardcount++;
   }
  } else {
   while (scan < loceol && *scan != '\n')
    scan++;
  }
  break;
 case SANY:
  if (utf8_target) {
   while (scan < loceol && hardcount < max) {
    scan += UTF8SKIP(scan);
    hardcount++;
   }
  }
  else
   scan = loceol;
  break;
 case CANY:  /* Move <scan> forward <max> bytes, unless goes off end */
  if (utf8_target && loceol - scan > max) {

   /* <loceol> hadn't been adjusted in the UTF-8 case */
   scan +=  max;
  }
  else {
   scan = loceol;
  }
  break;
 case EXACT:
  assert(STR_LEN(p) == reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1);

  c = (U8)*STRING(p);

  /* Can use a simple loop if the pattern char to match on is invariant
  * under UTF-8, or both target and pattern aren't UTF-8.  Note that we
  * can use UTF8_IS_INVARIANT() even if the pattern isn't UTF-8, as it's
  * true iff it doesn't matter if the argument is in UTF-8 or not */
  if (UTF8_IS_INVARIANT(c) || (! utf8_target && ! reginfo->is_utf8_pat)) {
   if (utf8_target && loceol - scan > max) {
    /* We didn't adjust <loceol> because is UTF-8, but ok to do so,
    * since here, to match at all, 1 char == 1 byte */
    loceol = scan + max;
   }
   while (scan < loceol && UCHARAT(scan) == c) {
    scan++;
   }
  }
  else if (reginfo->is_utf8_pat) {
   if (utf8_target) {
    STRLEN scan_char_len;

    /* When both target and pattern are UTF-8, we have to do
    * string EQ */
    while (hardcount < max
     && scan < loceol
     && (scan_char_len = UTF8SKIP(scan)) <= STR_LEN(p)
     && memEQ(scan, STRING(p), scan_char_len))
    {
     scan += scan_char_len;
     hardcount++;
    }
   }
   else if (! UTF8_IS_ABOVE_LATIN1(c)) {

    /* Target isn't utf8; convert the character in the UTF-8
    * pattern to non-UTF8, and do a simple loop */
    c = TWO_BYTE_UTF8_TO_NATIVE(c, *(STRING(p) + 1));
    while (scan < loceol && UCHARAT(scan) == c) {
     scan++;
    }
   } /* else pattern char is above Latin1, can't possibly match the
    non-UTF-8 target */
  }
  else {

   /* Here, the string must be utf8; pattern isn't, and <c> is
   * different in utf8 than not, so can't compare them directly.
   * Outside the loop, find the two utf8 bytes that represent c, and
   * then look for those in sequence in the utf8 string */
   U8 high = UTF8_TWO_BYTE_HI(c);
   U8 low = UTF8_TWO_BYTE_LO(c);

   while (hardcount < max
     && scan + 1 < loceol
     && UCHARAT(scan) == high
     && UCHARAT(scan + 1) == low)
   {
    scan += 2;
    hardcount++;
   }
  }
  break;

 case EXACTFA_NO_TRIE:   /* This node only generated for non-utf8 patterns */
  assert(! reginfo->is_utf8_pat);
  /* FALLTHROUGH */
 case EXACTFA:
  utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
  goto do_exactf;

 case EXACTFL:
  utf8_flags = FOLDEQ_LOCALE;
  goto do_exactf;

 case EXACTF:   /* This node only generated for non-utf8 patterns */
  assert(! reginfo->is_utf8_pat);
  utf8_flags = 0;
  goto do_exactf;

 case EXACTFU_SS:
 case EXACTFU:
  utf8_flags = reginfo->is_utf8_pat ? FOLDEQ_S2_ALREADY_FOLDED : 0;

 do_exactf: {
  int c1, c2;
  U8 c1_utf8[UTF8_MAXBYTES+1], c2_utf8[UTF8_MAXBYTES+1];

  assert(STR_LEN(p) == reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1);

  if (S_setup_EXACTISH_ST_c1_c2(aTHX_ p, &c1, c1_utf8, &c2, c2_utf8,
          reginfo))
  {
   if (c1 == CHRTEST_VOID) {
    /* Use full Unicode fold matching */
    char *tmpeol = reginfo->strend;
    STRLEN pat_len = reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1;
    while (hardcount < max
      && foldEQ_utf8_flags(scan, &tmpeol, 0, utf8_target,
           STRING(p), NULL, pat_len,
           reginfo->is_utf8_pat, utf8_flags))
    {
     scan = tmpeol;
     tmpeol = reginfo->strend;
     hardcount++;
    }
   }
   else if (utf8_target) {
    if (c1 == c2) {
     while (scan < loceol
      && hardcount < max
      && memEQ(scan, c1_utf8, UTF8SKIP(scan)))
     {
      scan += UTF8SKIP(scan);
      hardcount++;
     }
    }
    else {
     while (scan < loceol
      && hardcount < max
      && (memEQ(scan, c1_utf8, UTF8SKIP(scan))
       || memEQ(scan, c2_utf8, UTF8SKIP(scan))))
     {
      scan += UTF8SKIP(scan);
      hardcount++;
     }
    }
   }
   else if (c1 == c2) {
    while (scan < loceol && UCHARAT(scan) == c1) {
     scan++;
    }
   }
   else {
    while (scan < loceol &&
     (UCHARAT(scan) == c1 || UCHARAT(scan) == c2))
    {
     scan++;
    }
   }
  }
  break;
 }
 case ANYOF:
  if (utf8_target) {
   while (hardcount < max
    && scan < loceol
    && reginclass(prog, p, (U8*)scan, (U8*) loceol, utf8_target))
   {
    scan += UTF8SKIP(scan);
    hardcount++;
   }
  } else {
   while (scan < loceol && REGINCLASS(prog, p, (U8*)scan))
    scan++;
  }
  break;

 /* The argument (FLAGS) to all the POSIX node types is the class number */

 case NPOSIXL:
  to_complement = 1;
  /* FALLTHROUGH */

 case POSIXL:
  if (! utf8_target) {
   while (scan < loceol && to_complement ^ cBOOL(isFOO_lc(FLAGS(p),
                *scan)))
   {
    scan++;
   }
  } else {
   while (hardcount < max && scan < loceol
    && to_complement ^ cBOOL(isFOO_utf8_lc(FLAGS(p),
                (U8 *) scan)))
   {
    scan += UTF8SKIP(scan);
    hardcount++;
   }
  }
  break;

 case POSIXD:
  if (utf8_target) {
   goto utf8_posix;
  }
  /* FALLTHROUGH */

 case POSIXA:
  if (utf8_target && loceol - scan > max) {

   /* We didn't adjust <loceol> at the beginning of this routine
   * because is UTF-8, but it is actually ok to do so, since here, to
   * match, 1 char == 1 byte. */
   loceol = scan + max;
  }
  while (scan < loceol && _generic_isCC_A((U8) *scan, FLAGS(p))) {
   scan++;
  }
  break;

 case NPOSIXD:
  if (utf8_target) {
   to_complement = 1;
   goto utf8_posix;
  }
  /* FALLTHROUGH */

 case NPOSIXA:
  if (! utf8_target) {
   while (scan < loceol && ! _generic_isCC_A((U8) *scan, FLAGS(p))) {
    scan++;
   }
  }
  else {

   /* The complement of something that matches only ASCII matches all
   * non-ASCII, plus everything in ASCII that isn't in the class. */
   while (hardcount < max && scan < loceol
    && (! isASCII_utf8(scan)
     || ! _generic_isCC_A((U8) *scan, FLAGS(p))))
   {
    scan += UTF8SKIP(scan);
    hardcount++;
   }
  }
  break;

 case NPOSIXU:
  to_complement = 1;
  /* FALLTHROUGH */

 case POSIXU:
  if (! utf8_target) {
   while (scan < loceol && to_complement
        ^ cBOOL(_generic_isCC((U8) *scan, FLAGS(p))))
   {
    scan++;
   }
  }
  else {
 utf8_posix:
   classnum = (_char_class_number) FLAGS(p);
   if (classnum < _FIRST_NON_SWASH_CC) {

    /* Here, a swash is needed for above-Latin1 code points.
    * Process as many Latin1 code points using the built-in rules.
    * Go to another loop to finish processing upon encountering
    * the first Latin1 code point.  We could do that in this loop
    * as well, but the other way saves having to test if the swash
    * has been loaded every time through the loop: extra space to
    * save a test. */
    while (hardcount < max && scan < loceol) {
     if (UTF8_IS_INVARIANT(*scan)) {
      if (! (to_complement ^ cBOOL(_generic_isCC((U8) *scan,
                classnum))))
      {
       break;
      }
      scan++;
     }
     else if (UTF8_IS_DOWNGRADEABLE_START(*scan)) {
      if (! (to_complement
       ^ cBOOL(_generic_isCC(TWO_BYTE_UTF8_TO_NATIVE(*scan,
                 *(scan + 1)),
             classnum))))
      {
       break;
      }
      scan += 2;
     }
     else {
      goto found_above_latin1;
     }

     hardcount++;
    }
   }
   else {
    /* For these character classes, the knowledge of how to handle
    * every code point is compiled in to Perl via a macro.  This
    * code is written for making the loops as tight as possible.
    * It could be refactored to save space instead */
    switch (classnum) {
     case _CC_ENUM_SPACE:    /* XXX would require separate code
           if we revert the change of \v
           matching this */
      /* FALLTHROUGH */
     case _CC_ENUM_PSXSPC:
      while (hardcount < max
       && scan < loceol
       && (to_complement ^ cBOOL(isSPACE_utf8(scan))))
      {
       scan += UTF8SKIP(scan);
       hardcount++;
      }
      break;
     case _CC_ENUM_BLANK:
      while (hardcount < max
       && scan < loceol
       && (to_complement ^ cBOOL(isBLANK_utf8(scan))))
      {
       scan += UTF8SKIP(scan);
       hardcount++;
      }
      break;
     case _CC_ENUM_XDIGIT:
      while (hardcount < max
       && scan < loceol
       && (to_complement ^ cBOOL(isXDIGIT_utf8(scan))))
      {
       scan += UTF8SKIP(scan);
       hardcount++;
      }
      break;
     case _CC_ENUM_VERTSPACE:
      while (hardcount < max
       && scan < loceol
       && (to_complement ^ cBOOL(isVERTWS_utf8(scan))))
      {
       scan += UTF8SKIP(scan);
       hardcount++;
      }
      break;
     case _CC_ENUM_CNTRL:
      while (hardcount < max
       && scan < loceol
       && (to_complement ^ cBOOL(isCNTRL_utf8(scan))))
      {
       scan += UTF8SKIP(scan);
       hardcount++;
      }
      break;
     default:
      Perl_croak(aTHX_ "panic: regrepeat() node %d='%s' has an unexpected character class '%d'", OP(p), PL_reg_name[OP(p)], classnum);
    }
   }
  }
  break;

 found_above_latin1:   /* Continuation of POSIXU and NPOSIXU */

  /* Load the swash if not already present */
  if (! PL_utf8_swash_ptrs[classnum]) {
   U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
   PL_utf8_swash_ptrs[classnum] = _core_swash_init(
          "utf8",
          "",
          &PL_sv_undef, 1, 0,
          PL_XPosix_ptrs[classnum], &flags);
  }

  while (hardcount < max && scan < loceol
   && to_complement ^ cBOOL(_generic_utf8(
         classnum,
         scan,
         swash_fetch(PL_utf8_swash_ptrs[classnum],
            (U8 *) scan,
            TRUE))))
  {
   scan += UTF8SKIP(scan);
   hardcount++;
  }
  break;

 case LNBREAK:
  if (utf8_target) {
   while (hardcount < max && scan < loceol &&
     (c=is_LNBREAK_utf8_safe(scan, loceol))) {
    scan += c;
    hardcount++;
   }
  } else {
   /* LNBREAK can match one or two latin chars, which is ok, but we
   * have to use hardcount in this situation, and throw away the
   * adjustment to <loceol> done before the switch statement */
   loceol = reginfo->strend;
   while (scan < loceol && (c=is_LNBREAK_latin1_safe(scan, loceol))) {
    scan+=c;
    hardcount++;
   }
  }
  break;

 case BOUND:
 case BOUNDA:
 case BOUNDL:
 case BOUNDU:
 case EOS:
 case GPOS:
 case KEEPS:
 case NBOUND:
 case NBOUNDA:
 case NBOUNDL:
 case NBOUNDU:
 case OPFAIL:
 case SBOL:
 case SEOL:
  /* These are all 0 width, so match right here or not at all. */
  break;

 default:
  Perl_croak(aTHX_ "panic: regrepeat() called with unrecognized node type %d='%s'", OP(p), PL_reg_name[OP(p)]);
  /* NOTREACHED */
  assert(0);

 }

 if (hardcount)
  c = hardcount;
 else
  c = scan - *startposp;
 *startposp = scan;

 DEBUG_r({
  GET_RE_DEBUG_FLAGS_DECL;
  DEBUG_EXECUTE_r({
   SV * const prop = sv_newmortal();
   regprop(prog, prop, p, reginfo);
   PerlIO_printf(Perl_debug_log,
      "%*s  %s can match %"IVdf" times out of %"IVdf"...\n",
      REPORT_CODE_OFF + depth*2, "", SvPVX_const(prop),(IV)c,(IV)max);
  });
 });

 return(c);
}


#if !defined(PERL_IN_XSUB_RE) || defined(PLUGGABLE_RE_EXTENSION)
/*
- regclass_swash - prepare the utf8 swash.  Wraps the shared core version to
create a copy so that changes the caller makes won't change the shared one.
If <altsvp> is non-null, will return NULL in it, for back-compat.
 */
SV *
Perl_regclass_swash(pTHX_ const regexp *prog, const regnode* node, bool doinit, SV** listsvp, SV **altsvp)
{
 PERL_ARGS_ASSERT_REGCLASS_SWASH;

 if (altsvp) {
  *altsvp = NULL;
 }

 return newSVsv(_get_regclass_nonbitmap_data(prog, node, doinit, listsvp, NULL, NULL));
}

#endif /* !defined(PERL_IN_XSUB_RE) || defined(PLUGGABLE_RE_EXTENSION) */

/*
 - reginclass - determine if a character falls into a character class

  n is the ANYOF regnode
  p is the target string
  p_end points to one byte beyond the end of the target string
  utf8_target tells whether p is in UTF-8.

  Returns true if matched; false otherwise.

  Note that this can be a synthetic start class, a combination of various
  nodes, so things you think might be mutually exclusive, such as locale,
  aren't.  It can match both locale and non-locale

 */

STATIC bool
S_reginclass(pTHX_ regexp * const prog, const regnode * const n, const U8* const p, const U8* const p_end, const bool utf8_target)
{
 dVAR;
 const char flags = ANYOF_FLAGS(n);
 bool match = FALSE;
 UV c = *p;

 PERL_ARGS_ASSERT_REGINCLASS;

 /* If c is not already the code point, get it.  Note that
 * UTF8_IS_INVARIANT() works even if not in UTF-8 */
 if (! UTF8_IS_INVARIANT(c) && utf8_target) {
  STRLEN c_len = 0;
  c = utf8n_to_uvchr(p, p_end - p, &c_len,
    (UTF8_ALLOW_DEFAULT & UTF8_ALLOW_ANYUV)
    | UTF8_ALLOW_FFFF | UTF8_CHECK_ONLY);
    /* see [perl #37836] for UTF8_ALLOW_ANYUV; [perl #38293] for
    * UTF8_ALLOW_FFFF */
  if (c_len == (STRLEN)-1)
   Perl_croak(aTHX_ "Malformed UTF-8 character (fatal)");
 }

 /* If this character is potentially in the bitmap, check it */
 if (c < NUM_ANYOF_CODE_POINTS) {
  if (ANYOF_BITMAP_TEST(n, c))
   match = TRUE;
  else if ((flags & ANYOF_MATCHES_ALL_NON_UTF8_NON_ASCII)
    && ! utf8_target
    && ! isASCII(c))
  {
   match = TRUE;
  }
  else if (flags & ANYOF_LOCALE_FLAGS) {
   if ((flags & ANYOF_LOC_FOLD)
    && c < 256
    && ANYOF_BITMAP_TEST(n, PL_fold_locale[c]))
   {
    match = TRUE;
   }
   else if (ANYOF_POSIXL_TEST_ANY_SET(n)
     && c < 256
   ) {

    /* The data structure is arranged so bits 0, 2, 4, ... are set
    * if the class includes the Posix character class given by
    * bit/2; and 1, 3, 5, ... are set if the class includes the
    * complemented Posix class given by int(bit/2).  So we loop
    * through the bits, each time changing whether we complement
    * the result or not.  Suppose for the sake of illustration
    * that bits 0-3 mean respectively, \w, \W, \s, \S.  If bit 0
    * is set, it means there is a match for this ANYOF node if the
    * character is in the class given by the expression (0 / 2 = 0
    * = \w).  If it is in that class, isFOO_lc() will return 1,
    * and since 'to_complement' is 0, the result will stay TRUE,
    * and we exit the loop.  Suppose instead that bit 0 is 0, but
    * bit 1 is 1.  That means there is a match if the character
    * matches \W.  We won't bother to call isFOO_lc() on bit 0,
    * but will on bit 1.  On the second iteration 'to_complement'
    * will be 1, so the exclusive or will reverse things, so we
    * are testing for \W.  On the third iteration, 'to_complement'
    * will be 0, and we would be testing for \s; the fourth
    * iteration would test for \S, etc.
    *
    * Note that this code assumes that all the classes are closed
    * under folding.  For example, if a character matches \w, then
    * its fold does too; and vice versa.  This should be true for
    * any well-behaved locale for all the currently defined Posix
    * classes, except for :lower: and :upper:, which are handled
    * by the pseudo-class :cased: which matches if either of the
    * other two does.  To get rid of this assumption, an outer
    * loop could be used below to iterate over both the source
    * character, and its fold (if different) */

    int count = 0;
    int to_complement = 0;

    while (count < ANYOF_MAX) {
     if (ANYOF_POSIXL_TEST(n, count)
      && to_complement ^ cBOOL(isFOO_lc(count/2, (U8) c)))
     {
      match = TRUE;
      break;
     }
     count++;
     to_complement ^= 1;
    }
   }
  }
 }


 /* If the bitmap didn't (or couldn't) match, and something outside the
 * bitmap could match, try that. */
 if (!match) {
  if (c >= NUM_ANYOF_CODE_POINTS
   && (flags & ANYOF_MATCHES_ALL_ABOVE_BITMAP))
  {
   match = TRUE; /* Everything above the bitmap matches */
  }
  else if ((flags & ANYOF_HAS_NONBITMAP_NON_UTF8_MATCHES)
    || (utf8_target && (flags & ANYOF_HAS_UTF8_NONBITMAP_MATCHES))
    || ((flags & ANYOF_LOC_FOLD)
     && IN_UTF8_CTYPE_LOCALE
     && ARG(n) != ANYOF_ONLY_HAS_BITMAP))
  {
   SV* only_utf8_locale = NULL;
   SV * const sw = _get_regclass_nonbitmap_data(prog, n, TRUE, 0,
             &only_utf8_locale, NULL);
   if (sw) {
    U8 utf8_buffer[2];
    U8 * utf8_p;
    if (utf8_target) {
     utf8_p = (U8 *) p;
    } else { /* Convert to utf8 */
     utf8_p = utf8_buffer;
     append_utf8_from_native_byte(*p, &utf8_p);
     utf8_p = utf8_buffer;
    }

    if (swash_fetch(sw, utf8_p, TRUE)) {
     match = TRUE;
    }
   }
   if (! match && only_utf8_locale && IN_UTF8_CTYPE_LOCALE) {
    match = _invlist_contains_cp(only_utf8_locale, c);
   }
  }

  if (UNICODE_IS_SUPER(c)
   && (flags & ANYOF_WARN_SUPER)
   && ckWARN_d(WARN_NON_UNICODE))
  {
   Perl_warner(aTHX_ packWARN(WARN_NON_UNICODE),
    "Matched non-Unicode code point 0x%04"UVXf" against Unicode property; may not be portable", c);
  }
 }

#if ANYOF_INVERT != 1
 /* Depending on compiler optimization cBOOL takes time, so if don't have to
 * use it, don't */
#   error ANYOF_INVERT needs to be set to 1, or guarded with cBOOL below,
#endif

 /* The xor complements the return if to invert: 1^1 = 0, 1^0 = 1 */
 return (flags & ANYOF_INVERT) ^ match;
}

STATIC U8 *
S_reghop3(U8 *s, SSize_t off, const U8* lim)
{
 /* return the position 'off' UTF-8 characters away from 's', forward if
 * 'off' >= 0, backwards if negative.  But don't go outside of position
 * 'lim', which better be < s  if off < 0 */

 PERL_ARGS_ASSERT_REGHOP3;

 if (off >= 0) {
  while (off-- && s < lim) {
   /* XXX could check well-formedness here */
   s += UTF8SKIP(s);
  }
 }
 else {
  while (off++ && s > lim) {
   s--;
   if (UTF8_IS_CONTINUED(*s)) {
    while (s > lim && UTF8_IS_CONTINUATION(*s))
     s--;
   }
   /* XXX could check well-formedness here */
  }
 }
 return s;
}

STATIC U8 *
S_reghop4(U8 *s, SSize_t off, const U8* llim, const U8* rlim)
{
 PERL_ARGS_ASSERT_REGHOP4;

 if (off >= 0) {
  while (off-- && s < rlim) {
   /* XXX could check well-formedness here */
   s += UTF8SKIP(s);
  }
 }
 else {
  while (off++ && s > llim) {
   s--;
   if (UTF8_IS_CONTINUED(*s)) {
    while (s > llim && UTF8_IS_CONTINUATION(*s))
     s--;
   }
   /* XXX could check well-formedness here */
  }
 }
 return s;
}

/* like reghop3, but returns NULL on overrun, rather than returning last
 * char pos */

STATIC U8 *
S_reghopmaybe3(U8* s, SSize_t off, const U8* lim)
{
 PERL_ARGS_ASSERT_REGHOPMAYBE3;

 if (off >= 0) {
  while (off-- && s < lim) {
   /* XXX could check well-formedness here */
   s += UTF8SKIP(s);
  }
  if (off >= 0)
   return NULL;
 }
 else {
  while (off++ && s > lim) {
   s--;
   if (UTF8_IS_CONTINUED(*s)) {
    while (s > lim && UTF8_IS_CONTINUATION(*s))
     s--;
   }
   /* XXX could check well-formedness here */
  }
  if (off <= 0)
   return NULL;
 }
 return s;
}


/* when executing a regex that may have (?{}), extra stuff needs setting
   up that will be visible to the called code, even before the current
   match has finished. In particular:

   * $_ is localised to the SV currently being matched;
   * pos($_) is created if necessary, ready to be updated on each call-out
 to code;
   * a fake PMOP is created that can be set to PL_curpm (normally PL_curpm
 isn't set until the current pattern is successfully finished), so that
 $1 etc of the match-so-far can be seen;
   * save the old values of subbeg etc of the current regex, and  set then
 to the current string (again, this is normally only done at the end
 of execution)
*/

static void
S_setup_eval_state(pTHX_ regmatch_info *const reginfo)
{
 MAGIC *mg;
 regexp *const rex = ReANY(reginfo->prog);
 regmatch_info_aux_eval *eval_state = reginfo->info_aux_eval;

 eval_state->rex = rex;

 if (reginfo->sv) {
  /* Make $_ available to executed code. */
  if (reginfo->sv != DEFSV) {
   SAVE_DEFSV;
   DEFSV_set(reginfo->sv);
  }

  if (!(mg = mg_find_mglob(reginfo->sv))) {
   /* prepare for quick setting of pos */
   mg = sv_magicext_mglob(reginfo->sv);
   mg->mg_len = -1;
  }
  eval_state->pos_magic = mg;
  eval_state->pos       = mg->mg_len;
  eval_state->pos_flags = mg->mg_flags;
 }
 else
  eval_state->pos_magic = NULL;

 if (!PL_reg_curpm) {
  /* PL_reg_curpm is a fake PMOP that we can attach the current
  * regex to and point PL_curpm at, so that $1 et al are visible
  * within a /(?{})/. It's just allocated once per interpreter the
  * first time its needed */
  Newxz(PL_reg_curpm, 1, PMOP);
#ifdef USE_ITHREADS
  {
   SV* const repointer = &PL_sv_undef;
   /* this regexp is also owned by the new PL_reg_curpm, which
   will try to free it.  */
   av_push(PL_regex_padav, repointer);
   PL_reg_curpm->op_pmoffset = av_tindex(PL_regex_padav);
   PL_regex_pad = AvARRAY(PL_regex_padav);
  }
#endif
 }
 SET_reg_curpm(reginfo->prog);
 eval_state->curpm = PL_curpm;
 PL_curpm = PL_reg_curpm;
 if (RXp_MATCH_COPIED(rex)) {
  /*  Here is a serious problem: we cannot rewrite subbeg,
   since it may be needed if this match fails.  Thus
   $` inside (?{}) could fail... */
  eval_state->subbeg     = rex->subbeg;
  eval_state->sublen     = rex->sublen;
  eval_state->suboffset  = rex->suboffset;
  eval_state->subcoffset = rex->subcoffset;
#ifdef PERL_ANY_COW
  eval_state->saved_copy = rex->saved_copy;
#endif
  RXp_MATCH_COPIED_off(rex);
 }
 else
  eval_state->subbeg = NULL;
 rex->subbeg = (char *)reginfo->strbeg;
 rex->suboffset = 0;
 rex->subcoffset = 0;
 rex->sublen = reginfo->strend - reginfo->strbeg;
}


/* destructor to clear up regmatch_info_aux and regmatch_info_aux_eval */

static void
S_cleanup_regmatch_info_aux(pTHX_ void *arg)
{
 regmatch_info_aux *aux = (regmatch_info_aux *) arg;
 regmatch_info_aux_eval *eval_state =  aux->info_aux_eval;
 regmatch_slab *s;

 Safefree(aux->poscache);

 if (eval_state) {

  /* undo the effects of S_setup_eval_state() */

  if (eval_state->subbeg) {
   regexp * const rex = eval_state->rex;
   rex->subbeg     = eval_state->subbeg;
   rex->sublen     = eval_state->sublen;
   rex->suboffset  = eval_state->suboffset;
   rex->subcoffset = eval_state->subcoffset;
#ifdef PERL_ANY_COW
   rex->saved_copy = eval_state->saved_copy;
#endif
   RXp_MATCH_COPIED_on(rex);
  }
  if (eval_state->pos_magic)
  {
   eval_state->pos_magic->mg_len = eval_state->pos;
   eval_state->pos_magic->mg_flags =
    (eval_state->pos_magic->mg_flags & ~MGf_BYTES)
   | (eval_state->pos_flags & MGf_BYTES);
  }

  PL_curpm = eval_state->curpm;
 }

 PL_regmatch_state = aux->old_regmatch_state;
 PL_regmatch_slab  = aux->old_regmatch_slab;

 /* free all slabs above current one - this must be the last action
 * of this function, as aux and eval_state are allocated within
 * slabs and may be freed here */

 s = PL_regmatch_slab->next;
 if (s) {
  PL_regmatch_slab->next = NULL;
  while (s) {
   regmatch_slab * const osl = s;
   s = s->next;
   Safefree(osl);
  }
 }
}


STATIC void
S_to_utf8_substr(pTHX_ regexp *prog)
{
 /* Converts substr fields in prog from bytes to UTF-8, calling fbm_compile
 * on the converted value */

 int i = 1;

 PERL_ARGS_ASSERT_TO_UTF8_SUBSTR;

 do {
  if (prog->substrs->data[i].substr
   && !prog->substrs->data[i].utf8_substr) {
   SV* const sv = newSVsv(prog->substrs->data[i].substr);
   prog->substrs->data[i].utf8_substr = sv;
   sv_utf8_upgrade(sv);
   if (SvVALID(prog->substrs->data[i].substr)) {
    if (SvTAIL(prog->substrs->data[i].substr)) {
     /* Trim the trailing \n that fbm_compile added last
     time.  */
     SvCUR_set(sv, SvCUR(sv) - 1);
     /* Whilst this makes the SV technically "invalid" (as its
     buffer is no longer followed by "\0") when fbm_compile()
     adds the "\n" back, a "\0" is restored.  */
     fbm_compile(sv, FBMcf_TAIL);
    } else
     fbm_compile(sv, 0);
   }
   if (prog->substrs->data[i].substr == prog->check_substr)
    prog->check_utf8 = sv;
  }
 } while (i--);
}

STATIC bool
S_to_byte_substr(pTHX_ regexp *prog)
{
 /* Converts substr fields in prog from UTF-8 to bytes, calling fbm_compile
 * on the converted value; returns FALSE if can't be converted. */

 int i = 1;

 PERL_ARGS_ASSERT_TO_BYTE_SUBSTR;

 do {
  if (prog->substrs->data[i].utf8_substr
   && !prog->substrs->data[i].substr) {
   SV* sv = newSVsv(prog->substrs->data[i].utf8_substr);
   if (! sv_utf8_downgrade(sv, TRUE)) {
    return FALSE;
   }
   if (SvVALID(prog->substrs->data[i].utf8_substr)) {
    if (SvTAIL(prog->substrs->data[i].utf8_substr)) {
     /* Trim the trailing \n that fbm_compile added last
      time.  */
     SvCUR_set(sv, SvCUR(sv) - 1);
     fbm_compile(sv, FBMcf_TAIL);
    } else
     fbm_compile(sv, 0);
   }
   prog->substrs->data[i].substr = sv;
   if (prog->substrs->data[i].utf8_substr == prog->check_utf8)
    prog->check_substr = sv;
  }
 } while (i--);

 return TRUE;
}

/*
 * Local variables:
 * c-indentation-style: bsd
 * c-basic-offset: 4
 * indent-tabs-mode: nil
 * End:
 *
 * ex: set ts=8 sts=4 sw=4 et:
 */