+++ /dev/null
-/* regexec.c
- */
-
-/*
- * One Ring to rule them all, One Ring to find them
- &
- * [p.v of _The Lord of the Rings_, opening poem]
- * [p.50 of _The Lord of the Rings_, I/iii: "The Shadow of the Past"]
- * [p.254 of _The Lord of the Rings_, II/ii: "The Council of Elrond"]
- */
-
-/* This file contains functions for executing a regular expression. See
- * also regcomp.c which funnily enough, contains functions for compiling
- * a regular expression.
- *
- * This file is also copied at build time to ext/re/re_exec.c, where
- * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
- * This causes the main functions to be compiled under new names and with
- * debugging support added, which makes "use re 'debug'" work.
- */
-
-/* NOTE: this is derived from Henry Spencer's regexp code, and should not
- * confused with the original package (see point 3 below). Thanks, Henry!
- */
-
-/* Additional note: this code is very heavily munged from Henry's version
- * in places. In some spots I've traded clarity for efficiency, so don't
- * blame Henry for some of the lack of readability.
- */
-
-/* The names of the functions have been changed from regcomp and
- * regexec to pregcomp and pregexec in order to avoid conflicts
- * with the POSIX routines of the same names.
-*/
-
-#ifdef PERL_EXT_RE_BUILD
-#include "re_top.h"
-#endif
-
-/*
- * pregcomp and pregexec -- regsub and regerror are not used in perl
- *
- * Copyright (c) 1986 by University of Toronto.
- * Written by Henry Spencer. Not derived from licensed software.
- *
- * Permission is granted to anyone to use this software for any
- * purpose on any computer system, and to redistribute it freely,
- * subject to the following restrictions:
- *
- * 1. The author is not responsible for the consequences of use of
- * this software, no matter how awful, even if they arise
- * from defects in it.
- *
- * 2. The origin of this software must not be misrepresented, either
- * by explicit claim or by omission.
- *
- * 3. Altered versions must be plainly marked as such, and must not
- * be misrepresented as being the original software.
- *
- **** Alterations to Henry's code are...
- ****
- **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- **** by Larry Wall and others
- ****
- **** You may distribute under the terms of either the GNU General Public
- **** License or the Artistic License, as specified in the README file.
- *
- * Beware that some of this code is subtly aware of the way operator
- * precedence is structured in regular expressions. Serious changes in
- * regular-expression syntax might require a total rethink.
- */
-#include "EXTERN.h"
-#define PERL_IN_REGEXEC_C
-#include "perl.h"
-
-#ifdef PERL_IN_XSUB_RE
-# include "re_comp.h"
-#else
-# include "regcomp.h"
-#endif
-
-#define RF_tainted 1 /* tainted information used? */
-#define RF_warned 2 /* warned about big count? */
-
-#define RF_utf8 8 /* Pattern contains multibyte chars? */
-
-#define UTF_PATTERN ((PL_reg_flags & RF_utf8) != 0)
-
-#define RS_init 1 /* eval environment created */
-#define RS_set 2 /* replsv value is set */
-
-#ifndef STATIC
-#define STATIC static
-#endif
-
-/* Valid for non-utf8 strings only: avoids the reginclass call if there are no
- * complications: i.e., if everything matchable is straight forward in the
- * bitmap */
-#define REGINCLASS(prog,p,c) (ANYOF_FLAGS(p) ? reginclass(prog,p,c,0,0) \
- : ANYOF_BITMAP_TEST(p,*(c)))
-
-/*
- * Forwards.
- */
-
-#define CHR_SVLEN(sv) (utf8_target ? sv_len_utf8(sv) : SvCUR(sv))
-#define CHR_DIST(a,b) (PL_reg_match_utf8 ? utf8_distance(a,b) : a - b)
-
-#define HOPc(pos,off) \
- (char *)(PL_reg_match_utf8 \
- ? reghop3((U8*)pos, off, (U8*)(off >= 0 ? PL_regeol : PL_bostr)) \
- : (U8*)(pos + off))
-#define HOPBACKc(pos, off) \
- (char*)(PL_reg_match_utf8\
- ? reghopmaybe3((U8*)pos, -off, (U8*)PL_bostr) \
- : (pos - off >= PL_bostr) \
- ? (U8*)pos - off \
- : NULL)
-
-#define HOP3(pos,off,lim) (PL_reg_match_utf8 ? reghop3((U8*)(pos), off, (U8*)(lim)) : (U8*)(pos + off))
-#define HOP3c(pos,off,lim) ((char*)HOP3(pos,off,lim))
-
-/* these are unrolled below in the CCC_TRY_XXX defined */
-#define LOAD_UTF8_CHARCLASS(class,str) STMT_START { \
- if (!CAT2(PL_utf8_,class)) { bool ok; ENTER; save_re_context(); ok=CAT2(is_utf8_,class)((const U8*)str); assert(ok); LEAVE; } } STMT_END
-
-/* Doesn't do an assert to verify that is correct */
-#define LOAD_UTF8_CHARCLASS_NO_CHECK(class) STMT_START { \
- if (!CAT2(PL_utf8_,class)) { bool ok; ENTER; save_re_context(); ok=CAT2(is_utf8_,class)((const U8*)" "); LEAVE; } } STMT_END
-
-#define LOAD_UTF8_CHARCLASS_ALNUM() LOAD_UTF8_CHARCLASS(alnum,"a")
-#define LOAD_UTF8_CHARCLASS_DIGIT() LOAD_UTF8_CHARCLASS(digit,"0")
-#define LOAD_UTF8_CHARCLASS_SPACE() LOAD_UTF8_CHARCLASS(space," ")
-
-#define LOAD_UTF8_CHARCLASS_GCB() /* Grapheme cluster boundaries */ \
- LOAD_UTF8_CHARCLASS(X_begin, " "); \
- LOAD_UTF8_CHARCLASS(X_non_hangul, "A"); \
- /* These are utf8 constants, and not utf-ebcdic constants, so the \
- * assert should likely and hopefully fail on an EBCDIC machine */ \
- LOAD_UTF8_CHARCLASS(X_extend, "\xcc\x80"); /* U+0300 */ \
- \
- /* No asserts are done for these, in case called on an early \
- * Unicode version in which they map to nothing */ \
- LOAD_UTF8_CHARCLASS_NO_CHECK(X_prepend);/* U+0E40 "\xe0\xb9\x80" */ \
- LOAD_UTF8_CHARCLASS_NO_CHECK(X_L); /* U+1100 "\xe1\x84\x80" */ \
- LOAD_UTF8_CHARCLASS_NO_CHECK(X_LV); /* U+AC00 "\xea\xb0\x80" */ \
- LOAD_UTF8_CHARCLASS_NO_CHECK(X_LVT); /* U+AC01 "\xea\xb0\x81" */ \
- LOAD_UTF8_CHARCLASS_NO_CHECK(X_LV_LVT_V);/* U+AC01 "\xea\xb0\x81" */\
- LOAD_UTF8_CHARCLASS_NO_CHECK(X_T); /* U+11A8 "\xe1\x86\xa8" */ \
- LOAD_UTF8_CHARCLASS_NO_CHECK(X_V) /* U+1160 "\xe1\x85\xa0" */
-
-/*
- We dont use PERL_LEGACY_UNICODE_CHARCLASS_MAPPINGS as the direct test
- so that it is possible to override the option here without having to
- rebuild the entire core. as we are required to do if we change regcomp.h
- which is where PERL_LEGACY_UNICODE_CHARCLASS_MAPPINGS is defined.
-*/
-#if PERL_LEGACY_UNICODE_CHARCLASS_MAPPINGS
-#define BROKEN_UNICODE_CHARCLASS_MAPPINGS
-#endif
-
-#ifdef BROKEN_UNICODE_CHARCLASS_MAPPINGS
-#define LOAD_UTF8_CHARCLASS_PERL_WORD() LOAD_UTF8_CHARCLASS_ALNUM()
-#define LOAD_UTF8_CHARCLASS_PERL_SPACE() LOAD_UTF8_CHARCLASS_SPACE()
-#define LOAD_UTF8_CHARCLASS_POSIX_DIGIT() LOAD_UTF8_CHARCLASS_DIGIT()
-#define RE_utf8_perl_word PL_utf8_alnum
-#define RE_utf8_perl_space PL_utf8_space
-#define RE_utf8_posix_digit PL_utf8_digit
-#define perl_word alnum
-#define perl_space space
-#define posix_digit digit
-#else
-#define LOAD_UTF8_CHARCLASS_PERL_WORD() LOAD_UTF8_CHARCLASS(perl_word,"a")
-#define LOAD_UTF8_CHARCLASS_PERL_SPACE() LOAD_UTF8_CHARCLASS(perl_space," ")
-#define LOAD_UTF8_CHARCLASS_POSIX_DIGIT() LOAD_UTF8_CHARCLASS(posix_digit,"0")
-#define RE_utf8_perl_word PL_utf8_perl_word
-#define RE_utf8_perl_space PL_utf8_perl_space
-#define RE_utf8_posix_digit PL_utf8_posix_digit
-#endif
-
-
-#define _CCC_TRY_AFF_COMMON(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNC) \
- case NAMEL: \
- PL_reg_flags |= RF_tainted; \
- /* FALL THROUGH */ \
- case NAME: \
- if (!nextchr) \
- sayNO; \
- if (utf8_target && UTF8_IS_CONTINUED(nextchr)) { \
- if (!CAT2(PL_utf8_,CLASS)) { \
- bool ok; \
- ENTER; \
- save_re_context(); \
- ok=CAT2(is_utf8_,CLASS)((const U8*)STR); \
- assert(ok); \
- LEAVE; \
- } \
- if (!(OP(scan) == NAME \
- ? cBOOL(swash_fetch(CAT2(PL_utf8_,CLASS), (U8*)locinput, utf8_target)) \
- : LCFUNC_utf8((U8*)locinput))) \
- { \
- sayNO; \
- } \
- locinput += PL_utf8skip[nextchr]; \
- nextchr = UCHARAT(locinput); \
- break; \
- } \
- /* Drops through to the macro that calls this one */
-
-#define CCC_TRY_AFF(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNC,LCFUNC) \
- _CCC_TRY_AFF_COMMON(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNC) \
- if (!(OP(scan) == NAME ? FUNC(nextchr) : LCFUNC(nextchr))) \
- sayNO; \
- nextchr = UCHARAT(++locinput); \
- break
-
-/* Almost identical to the above, but has a case for a node that matches chars
- * between 128 and 255 using Unicode (latin1) semantics. */
-#define CCC_TRY_AFF_U(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNCU,LCFUNC) \
- _CCC_TRY_AFF_COMMON(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNC) \
- if (!(OP(scan) == NAMEL ? LCFUNC(nextchr) : (FUNCU(nextchr) && (isASCII(nextchr) || (FLAGS(scan) & USE_UNI))))) \
- sayNO; \
- nextchr = UCHARAT(++locinput); \
- break
-
-#define _CCC_TRY_NEG_COMMON(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNC) \
- case NAMEL: \
- PL_reg_flags |= RF_tainted; \
- /* FALL THROUGH */ \
- case NAME : \
- if (!nextchr && locinput >= PL_regeol) \
- sayNO; \
- if (utf8_target && UTF8_IS_CONTINUED(nextchr)) { \
- if (!CAT2(PL_utf8_,CLASS)) { \
- bool ok; \
- ENTER; \
- save_re_context(); \
- ok=CAT2(is_utf8_,CLASS)((const U8*)STR); \
- assert(ok); \
- LEAVE; \
- } \
- if ((OP(scan) == NAME \
- ? cBOOL(swash_fetch(CAT2(PL_utf8_,CLASS), (U8*)locinput, utf8_target)) \
- : LCFUNC_utf8((U8*)locinput))) \
- { \
- sayNO; \
- } \
- locinput += PL_utf8skip[nextchr]; \
- nextchr = UCHARAT(locinput); \
- break; \
- }
-
-#define CCC_TRY_NEG(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNC,LCFUNC) \
- _CCC_TRY_NEG_COMMON(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNC) \
- if ((OP(scan) == NAME ? FUNC(nextchr) : LCFUNC(nextchr))) \
- sayNO; \
- nextchr = UCHARAT(++locinput); \
- break
-
-
-#define CCC_TRY_NEG_U(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNCU,LCFUNC) \
- _CCC_TRY_NEG_COMMON(NAME,NAMEL,CLASS,STR,LCFUNC_utf8,FUNCU) \
- if ((OP(scan) == NAMEL ? LCFUNC(nextchr) : (FUNCU(nextchr) && (isASCII(nextchr) || (FLAGS(scan) & USE_UNI))))) \
- sayNO; \
- nextchr = UCHARAT(++locinput); \
- break
-
-
-
-/* TODO: Combine JUMPABLE and HAS_TEXT to cache OP(rn) */
-
-/* for use after a quantifier and before an EXACT-like node -- japhy */
-/* it would be nice to rework regcomp.sym to generate this stuff. sigh
- *
- * NOTE that *nothing* that affects backtracking should be in here, specifically
- * VERBS must NOT be included. JUMPABLE is used to determine if we can ignore a
- * node that is in between two EXACT like nodes when ascertaining what the required
- * "follow" character is. This should probably be moved to regex compile time
- * although it may be done at run time beause of the REF possibility - more
- * investigation required. -- demerphq
-*/
-#define JUMPABLE(rn) ( \
- OP(rn) == OPEN || \
- (OP(rn) == CLOSE && (!cur_eval || cur_eval->u.eval.close_paren != ARG(rn))) || \
- OP(rn) == EVAL || \
- OP(rn) == SUSPEND || OP(rn) == IFMATCH || \
- OP(rn) == PLUS || OP(rn) == MINMOD || \
- OP(rn) == KEEPS || \
- (PL_regkind[OP(rn)] == CURLY && ARG1(rn) > 0) \
-)
-#define IS_EXACT(rn) (PL_regkind[OP(rn)] == EXACT)
-
-#define HAS_TEXT(rn) ( IS_EXACT(rn) || PL_regkind[OP(rn)] == REF )
-
-#if 0
-/* Currently these are only used when PL_regkind[OP(rn)] == EXACT so
- we don't need this definition. */
-#define IS_TEXT(rn) ( OP(rn)==EXACT || OP(rn)==REF || OP(rn)==NREF )
-#define IS_TEXTF(rn) ( (OP(rn)==EXACTFU || OP(rn)==EXACTF) || OP(rn)==REFF || OP(rn)==NREFF )
-#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL || OP(rn)==REFFL || OP(rn)==NREFFL )
-
-#else
-/* ... so we use this as its faster. */
-#define IS_TEXT(rn) ( OP(rn)==EXACT )
-#define IS_TEXTFU(rn) ( OP(rn)==EXACTFU )
-#define IS_TEXTF(rn) ( OP(rn)==EXACTF )
-#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL )
-
-#endif
-
-/*
- Search for mandatory following text node; for lookahead, the text must
- follow but for lookbehind (rn->flags != 0) we skip to the next step.
-*/
-#define FIND_NEXT_IMPT(rn) STMT_START { \
- while (JUMPABLE(rn)) { \
- const OPCODE type = OP(rn); \
- if (type == SUSPEND || PL_regkind[type] == CURLY) \
- rn = NEXTOPER(NEXTOPER(rn)); \
- else if (type == PLUS) \
- rn = NEXTOPER(rn); \
- else if (type == IFMATCH) \
- rn = (rn->flags == 0) ? NEXTOPER(NEXTOPER(rn)) : rn + ARG(rn); \
- else rn += NEXT_OFF(rn); \
- } \
-} STMT_END
-
-
-static void restore_pos(pTHX_ void *arg);
-
-#define REGCP_PAREN_ELEMS 4
-#define REGCP_OTHER_ELEMS 5
-#define REGCP_FRAME_ELEMS 1
-/* REGCP_FRAME_ELEMS are not part of the REGCP_OTHER_ELEMS and
- * are needed for the regexp context stack bookkeeping. */
-
-STATIC CHECKPOINT
-S_regcppush(pTHX_ I32 parenfloor)
-{
- dVAR;
- const int retval = PL_savestack_ix;
- const int paren_elems_to_push = (PL_regsize - parenfloor) * REGCP_PAREN_ELEMS;
- const UV total_elems = paren_elems_to_push + REGCP_OTHER_ELEMS;
- const UV elems_shifted = total_elems << SAVE_TIGHT_SHIFT;
- int p;
- GET_RE_DEBUG_FLAGS_DECL;
-
- if (paren_elems_to_push < 0)
- Perl_croak(aTHX_ "panic: paren_elems_to_push < 0");
-
- if ((elems_shifted >> SAVE_TIGHT_SHIFT) != total_elems)
- Perl_croak(aTHX_ "panic: paren_elems_to_push offset %"UVuf
- " out of range (%lu-%ld)",
- total_elems, (unsigned long)PL_regsize, (long)parenfloor);
-
- SSGROW(total_elems + REGCP_FRAME_ELEMS);
-
- for (p = PL_regsize; p > parenfloor; p--) {
-/* REGCP_PARENS_ELEMS are pushed per pairs of parentheses. */
- SSPUSHINT(PL_regoffs[p].end);
- SSPUSHINT(PL_regoffs[p].start);
- SSPUSHPTR(PL_reg_start_tmp[p]);
- SSPUSHINT(p);
- DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
- " saving \\%"UVuf" %"IVdf"(%"IVdf")..%"IVdf"\n",
- (UV)p, (IV)PL_regoffs[p].start,
- (IV)(PL_reg_start_tmp[p] - PL_bostr),
- (IV)PL_regoffs[p].end
- ));
- }
-/* REGCP_OTHER_ELEMS are pushed in any case, parentheses or no. */
- SSPUSHPTR(PL_regoffs);
- SSPUSHINT(PL_regsize);
- SSPUSHINT(*PL_reglastparen);
- SSPUSHINT(*PL_reglastcloseparen);
- SSPUSHPTR(PL_reginput);
- SSPUSHUV(SAVEt_REGCONTEXT | elems_shifted); /* Magic cookie. */
-
- return retval;
-}
-
-/* These are needed since we do not localize EVAL nodes: */
-#define REGCP_SET(cp) \
- DEBUG_STATE_r( \
- PerlIO_printf(Perl_debug_log, \
- " Setting an EVAL scope, savestack=%"IVdf"\n", \
- (IV)PL_savestack_ix)); \
- cp = PL_savestack_ix
-
-#define REGCP_UNWIND(cp) \
- DEBUG_STATE_r( \
- if (cp != PL_savestack_ix) \
- PerlIO_printf(Perl_debug_log, \
- " Clearing an EVAL scope, savestack=%"IVdf"..%"IVdf"\n", \
- (IV)(cp), (IV)PL_savestack_ix)); \
- regcpblow(cp)
-
-STATIC char *
-S_regcppop(pTHX_ const regexp *rex)
-{
- dVAR;
- UV i;
- char *input;
- GET_RE_DEBUG_FLAGS_DECL;
-
- PERL_ARGS_ASSERT_REGCPPOP;
-
- /* Pop REGCP_OTHER_ELEMS before the parentheses loop starts. */
- i = SSPOPUV;
- assert((i & SAVE_MASK) == SAVEt_REGCONTEXT); /* Check that the magic cookie is there. */
- i >>= SAVE_TIGHT_SHIFT; /* Parentheses elements to pop. */
- input = (char *) SSPOPPTR;
- *PL_reglastcloseparen = SSPOPINT;
- *PL_reglastparen = SSPOPINT;
- PL_regsize = SSPOPINT;
- PL_regoffs=(regexp_paren_pair *) SSPOPPTR;
-
- i -= REGCP_OTHER_ELEMS;
- /* Now restore the parentheses context. */
- for ( ; i > 0; i -= REGCP_PAREN_ELEMS) {
- I32 tmps;
- U32 paren = (U32)SSPOPINT;
- PL_reg_start_tmp[paren] = (char *) SSPOPPTR;
- PL_regoffs[paren].start = SSPOPINT;
- tmps = SSPOPINT;
- if (paren <= *PL_reglastparen)
- PL_regoffs[paren].end = tmps;
- DEBUG_BUFFERS_r(
- PerlIO_printf(Perl_debug_log,
- " restoring \\%"UVuf" to %"IVdf"(%"IVdf")..%"IVdf"%s\n",
- (UV)paren, (IV)PL_regoffs[paren].start,
- (IV)(PL_reg_start_tmp[paren] - PL_bostr),
- (IV)PL_regoffs[paren].end,
- (paren > *PL_reglastparen ? "(no)" : ""));
- );
- }
- DEBUG_BUFFERS_r(
- if (*PL_reglastparen + 1 <= rex->nparens) {
- PerlIO_printf(Perl_debug_log,
- " restoring \\%"IVdf"..\\%"IVdf" to undef\n",
- (IV)(*PL_reglastparen + 1), (IV)rex->nparens);
- }
- );
-#if 1
- /* It would seem that the similar code in regtry()
- * already takes care of this, and in fact it is in
- * a better location to since this code can #if 0-ed out
- * but the code in regtry() is needed or otherwise tests
- * requiring null fields (pat.t#187 and split.t#{13,14}
- * (as of patchlevel 7877) will fail. Then again,
- * this code seems to be necessary or otherwise
- * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
- * --jhi updated by dapm */
- for (i = *PL_reglastparen + 1; i <= rex->nparens; i++) {
- if (i > PL_regsize)
- PL_regoffs[i].start = -1;
- PL_regoffs[i].end = -1;
- }
-#endif
- return input;
-}
-
-#define regcpblow(cp) LEAVE_SCOPE(cp) /* Ignores regcppush()ed data. */
-
-/*
- * pregexec and friends
- */
-
-#ifndef PERL_IN_XSUB_RE
-/*
- - pregexec - match a regexp against a string
- */
-I32
-Perl_pregexec(pTHX_ REGEXP * const prog, char* stringarg, register char *strend,
- char *strbeg, I32 minend, SV *screamer, U32 nosave)
-/* strend: pointer to null at end of string */
-/* strbeg: real beginning of string */
-/* minend: end of match must be >=minend after stringarg. */
-/* nosave: For optimizations. */
-{
- PERL_ARGS_ASSERT_PREGEXEC;
-
- return
- regexec_flags(prog, stringarg, strend, strbeg, minend, screamer, NULL,
- nosave ? 0 : REXEC_COPY_STR);
-}
-#endif
-
-/*
- * Need to implement the following flags for reg_anch:
- *
- * USE_INTUIT_NOML - Useful to call re_intuit_start() first
- * USE_INTUIT_ML
- * INTUIT_AUTORITATIVE_NOML - Can trust a positive answer
- * INTUIT_AUTORITATIVE_ML
- * INTUIT_ONCE_NOML - Intuit can match in one location only.
- * INTUIT_ONCE_ML
- *
- * Another flag for this function: SECOND_TIME (so that float substrs
- * with giant delta may be not rechecked).
- */
-
-/* Assumptions: if ANCH_GPOS, then strpos is anchored. XXXX Check GPOS logic */
-
-/* If SCREAM, then SvPVX_const(sv) should be compatible with strpos and strend.
- Otherwise, only SvCUR(sv) is used to get strbeg. */
-
-/* XXXX We assume that strpos is strbeg unless sv. */
-
-/* XXXX Some places assume that there is a fixed substring.
- An update may be needed if optimizer marks as "INTUITable"
- RExen without fixed substrings. Similarly, it is assumed that
- lengths of all the strings are no more than minlen, thus they
- cannot come from lookahead.
- (Or minlen should take into account lookahead.)
- NOTE: Some of this comment is not correct. minlen does now take account
- of lookahead/behind. Further research is required. -- demerphq
-
-*/
-
-/* A failure to find a constant substring means that there is no need to make
- an expensive call to REx engine, thus we celebrate a failure. Similarly,
- finding a substring too deep into the string means that less calls to
- regtry() should be needed.
-
- REx compiler's optimizer found 4 possible hints:
- a) Anchored substring;
- b) Fixed substring;
- c) Whether we are anchored (beginning-of-line or \G);
- d) First node (of those at offset 0) which may distingush positions;
- We use a)b)d) and multiline-part of c), and try to find a position in the
- string which does not contradict any of them.
- */
-
-/* Most of decisions we do here should have been done at compile time.
- The nodes of the REx which we used for the search should have been
- deleted from the finite automaton. */
-
-char *
-Perl_re_intuit_start(pTHX_ REGEXP * const rx, SV *sv, char *strpos,
- char *strend, const U32 flags, re_scream_pos_data *data)
-{
- dVAR;
- struct regexp *const prog = (struct regexp *)SvANY(rx);
- register I32 start_shift = 0;
- /* Should be nonnegative! */
- register I32 end_shift = 0;
- register char *s;
- register SV *check;
- char *strbeg;
- char *t;
- const bool utf8_target = (sv && SvUTF8(sv)) ? 1 : 0; /* if no sv we have to assume bytes */
- I32 ml_anch;
- register char *other_last = NULL; /* other substr checked before this */
- char *check_at = NULL; /* check substr found at this pos */
- const I32 multiline = prog->extflags & RXf_PMf_MULTILINE;
- RXi_GET_DECL(prog,progi);
-#ifdef DEBUGGING
- const char * const i_strpos = strpos;
-#endif
- GET_RE_DEBUG_FLAGS_DECL;
-
- PERL_ARGS_ASSERT_RE_INTUIT_START;
-
- RX_MATCH_UTF8_set(rx,utf8_target);
-
- if (RX_UTF8(rx)) {
- PL_reg_flags |= RF_utf8;
- }
- DEBUG_EXECUTE_r(
- debug_start_match(rx, utf8_target, strpos, strend,
- sv ? "Guessing start of match in sv for"
- : "Guessing start of match in string for");
- );
-
- /* CHR_DIST() would be more correct here but it makes things slow. */
- if (prog->minlen > strend - strpos) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "String too short... [re_intuit_start]\n"));
- goto fail;
- }
-
- strbeg = (sv && SvPOK(sv)) ? strend - SvCUR(sv) : strpos;
- PL_regeol = strend;
- if (utf8_target) {
- if (!prog->check_utf8 && prog->check_substr)
- to_utf8_substr(prog);
- check = prog->check_utf8;
- } else {
- if (!prog->check_substr && prog->check_utf8)
- to_byte_substr(prog);
- check = prog->check_substr;
- }
- if (check == &PL_sv_undef) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "Non-utf8 string cannot match utf8 check string\n"));
- goto fail;
- }
- if (prog->extflags & RXf_ANCH) { /* Match at beg-of-str or after \n */
- ml_anch = !( (prog->extflags & RXf_ANCH_SINGLE)
- || ( (prog->extflags & RXf_ANCH_BOL)
- && !multiline ) ); /* Check after \n? */
-
- if (!ml_anch) {
- if ( !(prog->extflags & RXf_ANCH_GPOS) /* Checked by the caller */
- && !(prog->intflags & PREGf_IMPLICIT) /* not a real BOL */
- /* SvCUR is not set on references: SvRV and SvPVX_const overlap */
- && sv && !SvROK(sv)
- && (strpos != strbeg)) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Not at start...\n"));
- goto fail;
- }
- if (prog->check_offset_min == prog->check_offset_max &&
- !(prog->extflags & RXf_CANY_SEEN)) {
- /* Substring at constant offset from beg-of-str... */
- I32 slen;
-
- s = HOP3c(strpos, prog->check_offset_min, strend);
-
- if (SvTAIL(check)) {
- slen = SvCUR(check); /* >= 1 */
-
- if ( strend - s > slen || strend - s < slen - 1
- || (strend - s == slen && strend[-1] != '\n')) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "String too long...\n"));
- goto fail_finish;
- }
- /* Now should match s[0..slen-2] */
- slen--;
- if (slen && (*SvPVX_const(check) != *s
- || (slen > 1
- && memNE(SvPVX_const(check), s, slen)))) {
- report_neq:
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "String not equal...\n"));
- goto fail_finish;
- }
- }
- else if (*SvPVX_const(check) != *s
- || ((slen = SvCUR(check)) > 1
- && memNE(SvPVX_const(check), s, slen)))
- goto report_neq;
- check_at = s;
- goto success_at_start;
- }
- }
- /* Match is anchored, but substr is not anchored wrt beg-of-str. */
- s = strpos;
- start_shift = prog->check_offset_min; /* okay to underestimate on CC */
- end_shift = prog->check_end_shift;
-
- if (!ml_anch) {
- const I32 end = prog->check_offset_max + CHR_SVLEN(check)
- - (SvTAIL(check) != 0);
- const I32 eshift = CHR_DIST((U8*)strend, (U8*)s) - end;
-
- if (end_shift < eshift)
- end_shift = eshift;
- }
- }
- else { /* Can match at random position */
- ml_anch = 0;
- s = strpos;
- start_shift = prog->check_offset_min; /* okay to underestimate on CC */
- end_shift = prog->check_end_shift;
-
- /* end shift should be non negative here */
- }
-
-#ifdef QDEBUGGING /* 7/99: reports of failure (with the older version) */
- if (end_shift < 0)
- Perl_croak(aTHX_ "panic: end_shift: %"IVdf" pattern:\n%s\n ",
- (IV)end_shift, RX_PRECOMP(prog));
-#endif
-
- restart:
- /* Find a possible match in the region s..strend by looking for
- the "check" substring in the region corrected by start/end_shift. */
-
- {
- I32 srch_start_shift = start_shift;
- I32 srch_end_shift = end_shift;
- if (srch_start_shift < 0 && strbeg - s > srch_start_shift) {
- srch_end_shift -= ((strbeg - s) - srch_start_shift);
- srch_start_shift = strbeg - s;
- }
- DEBUG_OPTIMISE_MORE_r({
- PerlIO_printf(Perl_debug_log, "Check offset min: %"IVdf" Start shift: %"IVdf" End shift %"IVdf" Real End Shift: %"IVdf"\n",
- (IV)prog->check_offset_min,
- (IV)srch_start_shift,
- (IV)srch_end_shift,
- (IV)prog->check_end_shift);
- });
-
- if (flags & REXEC_SCREAM) {
- I32 p = -1; /* Internal iterator of scream. */
- I32 * const pp = data ? data->scream_pos : &p;
-
- if (PL_screamfirst[BmRARE(check)] >= 0
- || ( BmRARE(check) == '\n'
- && (BmPREVIOUS(check) == SvCUR(check) - 1)
- && SvTAIL(check) ))
- s = screaminstr(sv, check,
- srch_start_shift + (s - strbeg), srch_end_shift, pp, 0);
- else
- goto fail_finish;
- /* we may be pointing at the wrong string */
- if (s && RXp_MATCH_COPIED(prog))
- s = strbeg + (s - SvPVX_const(sv));
- if (data)
- *data->scream_olds = s;
- }
- else {
- U8* start_point;
- U8* end_point;
- if (prog->extflags & RXf_CANY_SEEN) {
- start_point= (U8*)(s + srch_start_shift);
- end_point= (U8*)(strend - srch_end_shift);
- } else {
- start_point= HOP3(s, srch_start_shift, srch_start_shift < 0 ? strbeg : strend);
- end_point= HOP3(strend, -srch_end_shift, strbeg);
- }
- DEBUG_OPTIMISE_MORE_r({
- PerlIO_printf(Perl_debug_log, "fbm_instr len=%d str=<%.*s>\n",
- (int)(end_point - start_point),
- (int)(end_point - start_point) > 20 ? 20 : (int)(end_point - start_point),
- start_point);
- });
-
- s = fbm_instr( start_point, end_point,
- check, multiline ? FBMrf_MULTILINE : 0);
- }
- }
- /* Update the count-of-usability, remove useless subpatterns,
- unshift s. */
-
- DEBUG_EXECUTE_r({
- RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
- SvPVX_const(check), RE_SV_DUMPLEN(check), 30);
- PerlIO_printf(Perl_debug_log, "%s %s substr %s%s%s",
- (s ? "Found" : "Did not find"),
- (check == (utf8_target ? prog->anchored_utf8 : prog->anchored_substr)
- ? "anchored" : "floating"),
- quoted,
- RE_SV_TAIL(check),
- (s ? " at offset " : "...\n") );
- });
-
- if (!s)
- goto fail_finish;
- /* Finish the diagnostic message */
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%ld...\n", (long)(s - i_strpos)) );
-
- /* XXX dmq: first branch is for positive lookbehind...
- Our check string is offset from the beginning of the pattern.
- So we need to do any stclass tests offset forward from that
- point. I think. :-(
- */
-
-
-
- check_at=s;
-
-
- /* Got a candidate. Check MBOL anchoring, and the *other* substr.
- Start with the other substr.
- XXXX no SCREAM optimization yet - and a very coarse implementation
- XXXX /ttx+/ results in anchored="ttx", floating="x". floating will
- *always* match. Probably should be marked during compile...
- Probably it is right to do no SCREAM here...
- */
-
- if (utf8_target ? (prog->float_utf8 && prog->anchored_utf8)
- : (prog->float_substr && prog->anchored_substr))
- {
- /* Take into account the "other" substring. */
- /* XXXX May be hopelessly wrong for UTF... */
- if (!other_last)
- other_last = strpos;
- if (check == (utf8_target ? prog->float_utf8 : prog->float_substr)) {
- do_other_anchored:
- {
- char * const last = HOP3c(s, -start_shift, strbeg);
- char *last1, *last2;
- char * const saved_s = s;
- SV* must;
-
- t = s - prog->check_offset_max;
- if (s - strpos > prog->check_offset_max /* signed-corrected t > strpos */
- && (!utf8_target
- || ((t = (char*)reghopmaybe3((U8*)s, -(prog->check_offset_max), (U8*)strpos))
- && t > strpos)))
- NOOP;
- else
- t = strpos;
- t = HOP3c(t, prog->anchored_offset, strend);
- if (t < other_last) /* These positions already checked */
- t = other_last;
- last2 = last1 = HOP3c(strend, -prog->minlen, strbeg);
- if (last < last1)
- last1 = last;
- /* XXXX It is not documented what units *_offsets are in.
- We assume bytes, but this is clearly wrong.
- Meaning this code needs to be carefully reviewed for errors.
- dmq.
- */
-
- /* On end-of-str: see comment below. */
- must = utf8_target ? prog->anchored_utf8 : prog->anchored_substr;
- if (must == &PL_sv_undef) {
- s = (char*)NULL;
- DEBUG_r(must = prog->anchored_utf8); /* for debug */
- }
- else
- s = fbm_instr(
- (unsigned char*)t,
- HOP3(HOP3(last1, prog->anchored_offset, strend)
- + SvCUR(must), -(SvTAIL(must)!=0), strbeg),
- must,
- multiline ? FBMrf_MULTILINE : 0
- );
- DEBUG_EXECUTE_r({
- RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
- SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
- PerlIO_printf(Perl_debug_log, "%s anchored substr %s%s",
- (s ? "Found" : "Contradicts"),
- quoted, RE_SV_TAIL(must));
- });
-
-
- if (!s) {
- if (last1 >= last2) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- ", giving up...\n"));
- goto fail_finish;
- }
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- ", trying floating at offset %ld...\n",
- (long)(HOP3c(saved_s, 1, strend) - i_strpos)));
- other_last = HOP3c(last1, prog->anchored_offset+1, strend);
- s = HOP3c(last, 1, strend);
- goto restart;
- }
- else {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, " at offset %ld...\n",
- (long)(s - i_strpos)));
- t = HOP3c(s, -prog->anchored_offset, strbeg);
- other_last = HOP3c(s, 1, strend);
- s = saved_s;
- if (t == strpos)
- goto try_at_start;
- goto try_at_offset;
- }
- }
- }
- else { /* Take into account the floating substring. */
- char *last, *last1;
- char * const saved_s = s;
- SV* must;
-
- t = HOP3c(s, -start_shift, strbeg);
- last1 = last =
- HOP3c(strend, -prog->minlen + prog->float_min_offset, strbeg);
- if (CHR_DIST((U8*)last, (U8*)t) > prog->float_max_offset)
- last = HOP3c(t, prog->float_max_offset, strend);
- s = HOP3c(t, prog->float_min_offset, strend);
- if (s < other_last)
- s = other_last;
- /* XXXX It is not documented what units *_offsets are in. Assume bytes. */
- must = utf8_target ? prog->float_utf8 : prog->float_substr;
- /* fbm_instr() takes into account exact value of end-of-str
- if the check is SvTAIL(ed). Since false positives are OK,
- and end-of-str is not later than strend we are OK. */
- if (must == &PL_sv_undef) {
- s = (char*)NULL;
- DEBUG_r(must = prog->float_utf8); /* for debug message */
- }
- else
- s = fbm_instr((unsigned char*)s,
- (unsigned char*)last + SvCUR(must)
- - (SvTAIL(must)!=0),
- must, multiline ? FBMrf_MULTILINE : 0);
- DEBUG_EXECUTE_r({
- RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
- SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
- PerlIO_printf(Perl_debug_log, "%s floating substr %s%s",
- (s ? "Found" : "Contradicts"),
- quoted, RE_SV_TAIL(must));
- });
- if (!s) {
- if (last1 == last) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- ", giving up...\n"));
- goto fail_finish;
- }
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- ", trying anchored starting at offset %ld...\n",
- (long)(saved_s + 1 - i_strpos)));
- other_last = last;
- s = HOP3c(t, 1, strend);
- goto restart;
- }
- else {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, " at offset %ld...\n",
- (long)(s - i_strpos)));
- other_last = s; /* Fix this later. --Hugo */
- s = saved_s;
- if (t == strpos)
- goto try_at_start;
- goto try_at_offset;
- }
- }
- }
-
-
- t= (char*)HOP3( s, -prog->check_offset_max, (prog->check_offset_max<0) ? strend : strpos);
-
- DEBUG_OPTIMISE_MORE_r(
- PerlIO_printf(Perl_debug_log,
- "Check offset min:%"IVdf" max:%"IVdf" S:%"IVdf" t:%"IVdf" D:%"IVdf" end:%"IVdf"\n",
- (IV)prog->check_offset_min,
- (IV)prog->check_offset_max,
- (IV)(s-strpos),
- (IV)(t-strpos),
- (IV)(t-s),
- (IV)(strend-strpos)
- )
- );
-
- if (s - strpos > prog->check_offset_max /* signed-corrected t > strpos */
- && (!utf8_target
- || ((t = (char*)reghopmaybe3((U8*)s, -prog->check_offset_max, (U8*) ((prog->check_offset_max<0) ? strend : strpos)))
- && t > strpos)))
- {
- /* Fixed substring is found far enough so that the match
- cannot start at strpos. */
- try_at_offset:
- if (ml_anch && t[-1] != '\n') {
- /* Eventually fbm_*() should handle this, but often
- anchored_offset is not 0, so this check will not be wasted. */
- /* XXXX In the code below we prefer to look for "^" even in
- presence of anchored substrings. And we search even
- beyond the found float position. These pessimizations
- are historical artefacts only. */
- find_anchor:
- while (t < strend - prog->minlen) {
- if (*t == '\n') {
- if (t < check_at - prog->check_offset_min) {
- if (utf8_target ? prog->anchored_utf8 : prog->anchored_substr) {
- /* Since we moved from the found position,
- we definitely contradict the found anchored
- substr. Due to the above check we do not
- contradict "check" substr.
- Thus we can arrive here only if check substr
- is float. Redo checking for "other"=="fixed".
- */
- strpos = t + 1;
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m at offset %ld, rescanning for anchored from offset %ld...\n",
- PL_colors[0], PL_colors[1], (long)(strpos - i_strpos), (long)(strpos - i_strpos + prog->anchored_offset)));
- goto do_other_anchored;
- }
- /* We don't contradict the found floating substring. */
- /* XXXX Why not check for STCLASS? */
- s = t + 1;
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m at offset %ld...\n",
- PL_colors[0], PL_colors[1], (long)(s - i_strpos)));
- goto set_useful;
- }
- /* Position contradicts check-string */
- /* XXXX probably better to look for check-string
- than for "\n", so one should lower the limit for t? */
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m, restarting lookup for check-string at offset %ld...\n",
- PL_colors[0], PL_colors[1], (long)(t + 1 - i_strpos)));
- other_last = strpos = s = t + 1;
- goto restart;
- }
- t++;
- }
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Did not find /%s^%s/m...\n",
- PL_colors[0], PL_colors[1]));
- goto fail_finish;
- }
- else {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Starting position does not contradict /%s^%s/m...\n",
- PL_colors[0], PL_colors[1]));
- }
- s = t;
- set_useful:
- ++BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr); /* hooray/5 */
- }
- else {
- /* The found string does not prohibit matching at strpos,
- - no optimization of calling REx engine can be performed,
- unless it was an MBOL and we are not after MBOL,
- or a future STCLASS check will fail this. */
- try_at_start:
- /* Even in this situation we may use MBOL flag if strpos is offset
- wrt the start of the string. */
- if (ml_anch && sv && !SvROK(sv) /* See prev comment on SvROK */
- && (strpos != strbeg) && strpos[-1] != '\n'
- /* May be due to an implicit anchor of m{.*foo} */
- && !(prog->intflags & PREGf_IMPLICIT))
- {
- t = strpos;
- goto find_anchor;
- }
- DEBUG_EXECUTE_r( if (ml_anch)
- PerlIO_printf(Perl_debug_log, "Position at offset %ld does not contradict /%s^%s/m...\n",
- (long)(strpos - i_strpos), PL_colors[0], PL_colors[1]);
- );
- success_at_start:
- if (!(prog->intflags & PREGf_NAUGHTY) /* XXXX If strpos moved? */
- && (utf8_target ? (
- prog->check_utf8 /* Could be deleted already */
- && --BmUSEFUL(prog->check_utf8) < 0
- && (prog->check_utf8 == prog->float_utf8)
- ) : (
- prog->check_substr /* Could be deleted already */
- && --BmUSEFUL(prog->check_substr) < 0
- && (prog->check_substr == prog->float_substr)
- )))
- {
- /* If flags & SOMETHING - do not do it many times on the same match */
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "... Disabling check substring...\n"));
- /* XXX Does the destruction order has to change with utf8_target? */
- SvREFCNT_dec(utf8_target ? prog->check_utf8 : prog->check_substr);
- SvREFCNT_dec(utf8_target ? prog->check_substr : prog->check_utf8);
- prog->check_substr = prog->check_utf8 = NULL; /* disable */
- prog->float_substr = prog->float_utf8 = NULL; /* clear */
- check = NULL; /* abort */
- s = strpos;
- /* XXXX If the check string was an implicit check MBOL, then we need to unset the relevent flag
- see http://bugs.activestate.com/show_bug.cgi?id=87173 */
- if (prog->intflags & PREGf_IMPLICIT)
- prog->extflags &= ~RXf_ANCH_MBOL;
- /* XXXX This is a remnant of the old implementation. It
- looks wasteful, since now INTUIT can use many
- other heuristics. */
- prog->extflags &= ~RXf_USE_INTUIT;
- /* XXXX What other flags might need to be cleared in this branch? */
- }
- else
- s = strpos;
- }
-
- /* Last resort... */
- /* XXXX BmUSEFUL already changed, maybe multiple change is meaningful... */
- /* trie stclasses are too expensive to use here, we are better off to
- leave it to regmatch itself */
- if (progi->regstclass && PL_regkind[OP(progi->regstclass)]!=TRIE) {
- /* minlen == 0 is possible if regstclass is \b or \B,
- and the fixed substr is ''$.
- Since minlen is already taken into account, s+1 is before strend;
- accidentally, minlen >= 1 guaranties no false positives at s + 1
- even for \b or \B. But (minlen? 1 : 0) below assumes that
- regstclass does not come from lookahead... */
- /* If regstclass takes bytelength more than 1: If charlength==1, OK.
- This leaves EXACTF, EXACTFU only, which are dealt with in find_byclass(). */
- const U8* const str = (U8*)STRING(progi->regstclass);
- const int cl_l = (PL_regkind[OP(progi->regstclass)] == EXACT
- ? CHR_DIST(str+STR_LEN(progi->regstclass), str)
- : 1);
- char * endpos;
- if (prog->anchored_substr || prog->anchored_utf8 || ml_anch)
- endpos= HOP3c(s, (prog->minlen ? cl_l : 0), strend);
- else if (prog->float_substr || prog->float_utf8)
- endpos= HOP3c(HOP3c(check_at, -start_shift, strbeg), cl_l, strend);
- else
- endpos= strend;
-
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "start_shift: %"IVdf" check_at: %"IVdf" s: %"IVdf" endpos: %"IVdf"\n",
- (IV)start_shift, (IV)(check_at - strbeg), (IV)(s - strbeg), (IV)(endpos - strbeg)));
-
- t = s;
- s = find_byclass(prog, progi->regstclass, s, endpos, NULL);
- if (!s) {
-#ifdef DEBUGGING
- const char *what = NULL;
-#endif
- if (endpos == strend) {
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "Could not match STCLASS...\n") );
- goto fail;
- }
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "This position contradicts STCLASS...\n") );
- if ((prog->extflags & RXf_ANCH) && !ml_anch)
- goto fail;
- /* Contradict one of substrings */
- if (prog->anchored_substr || prog->anchored_utf8) {
- if ((utf8_target ? prog->anchored_utf8 : prog->anchored_substr) == check) {
- DEBUG_EXECUTE_r( what = "anchored" );
- hop_and_restart:
- s = HOP3c(t, 1, strend);
- if (s + start_shift + end_shift > strend) {
- /* XXXX Should be taken into account earlier? */
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "Could not match STCLASS...\n") );
- goto fail;
- }
- if (!check)
- goto giveup;
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "Looking for %s substr starting at offset %ld...\n",
- what, (long)(s + start_shift - i_strpos)) );
- goto restart;
- }
- /* Have both, check_string is floating */
- if (t + start_shift >= check_at) /* Contradicts floating=check */
- goto retry_floating_check;
- /* Recheck anchored substring, but not floating... */
- s = check_at;
- if (!check)
- goto giveup;
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "Looking for anchored substr starting at offset %ld...\n",
- (long)(other_last - i_strpos)) );
- goto do_other_anchored;
- }
- /* Another way we could have checked stclass at the
- current position only: */
- if (ml_anch) {
- s = t = t + 1;
- if (!check)
- goto giveup;
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "Looking for /%s^%s/m starting at offset %ld...\n",
- PL_colors[0], PL_colors[1], (long)(t - i_strpos)) );
- goto try_at_offset;
- }
- if (!(utf8_target ? prog->float_utf8 : prog->float_substr)) /* Could have been deleted */
- goto fail;
- /* Check is floating subtring. */
- retry_floating_check:
- t = check_at - start_shift;
- DEBUG_EXECUTE_r( what = "floating" );
- goto hop_and_restart;
- }
- if (t != s) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "By STCLASS: moving %ld --> %ld\n",
- (long)(t - i_strpos), (long)(s - i_strpos))
- );
- }
- else {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "Does not contradict STCLASS...\n");
- );
- }
- }
- giveup:
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%s%s:%s match at offset %ld\n",
- PL_colors[4], (check ? "Guessed" : "Giving up"),
- PL_colors[5], (long)(s - i_strpos)) );
- return s;
-
- fail_finish: /* Substring not found */
- if (prog->check_substr || prog->check_utf8) /* could be removed already */
- BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr) += 5; /* hooray */
- fail:
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch rejected by optimizer%s\n",
- PL_colors[4], PL_colors[5]));
- return NULL;
-}
-
-#define DECL_TRIE_TYPE(scan) \
- const enum { trie_plain, trie_utf8, trie_utf8_fold, trie_latin_utf8_fold } \
- trie_type = (scan->flags != EXACT) \
- ? (utf8_target ? trie_utf8_fold : (UTF_PATTERN ? trie_latin_utf8_fold : trie_plain)) \
- : (utf8_target ? trie_utf8 : trie_plain)
-
-#define REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc, uscan, len, \
-uvc, charid, foldlen, foldbuf, uniflags) STMT_START { \
- switch (trie_type) { \
- case trie_utf8_fold: \
- if ( foldlen>0 ) { \
- uvc = utf8n_to_uvuni( uscan, UTF8_MAXLEN, &len, uniflags ); \
- foldlen -= len; \
- uscan += len; \
- len=0; \
- } else { \
- uvc = utf8n_to_uvuni( (U8*)uc, UTF8_MAXLEN, &len, uniflags ); \
- uvc = to_uni_fold( uvc, foldbuf, &foldlen ); \
- foldlen -= UNISKIP( uvc ); \
- uscan = foldbuf + UNISKIP( uvc ); \
- } \
- break; \
- case trie_latin_utf8_fold: \
- if ( foldlen>0 ) { \
- uvc = utf8n_to_uvuni( uscan, UTF8_MAXLEN, &len, uniflags ); \
- foldlen -= len; \
- uscan += len; \
- len=0; \
- } else { \
- len = 1; \
- uvc = to_uni_fold( *(U8*)uc, foldbuf, &foldlen ); \
- foldlen -= UNISKIP( uvc ); \
- uscan = foldbuf + UNISKIP( uvc ); \
- } \
- break; \
- case trie_utf8: \
- uvc = utf8n_to_uvuni( (U8*)uc, UTF8_MAXLEN, &len, uniflags ); \
- break; \
- case trie_plain: \
- uvc = (UV)*uc; \
- len = 1; \
- } \
- if (uvc < 256) { \
- charid = trie->charmap[ uvc ]; \
- } \
- else { \
- charid = 0; \
- if (widecharmap) { \
- SV** const svpp = hv_fetch(widecharmap, \
- (char*)&uvc, sizeof(UV), 0); \
- if (svpp) \
- charid = (U16)SvIV(*svpp); \
- } \
- } \
-} STMT_END
-
-#define REXEC_FBC_EXACTISH_CHECK(CoNd) \
-{ \
- char *my_strend= (char *)strend; \
- if ( (CoNd) \
- && (ln == len || \
- foldEQ_utf8(s, &my_strend, 0, utf8_target, \
- m, NULL, ln, cBOOL(UTF_PATTERN))) \
- && (!reginfo || regtry(reginfo, &s)) ) \
- goto got_it; \
- else { \
- U8 foldbuf[UTF8_MAXBYTES_CASE+1]; \
- uvchr_to_utf8(tmpbuf, c); \
- f = to_utf8_fold(tmpbuf, foldbuf, &foldlen); \
- if ( f != c \
- && (f == c1 || f == c2) \
- && (ln == len || \
- foldEQ_utf8(s, &my_strend, 0, utf8_target,\
- m, NULL, ln, cBOOL(UTF_PATTERN)))\
- && (!reginfo || regtry(reginfo, &s)) ) \
- goto got_it; \
- } \
-} \
-s += len
-
-#define REXEC_FBC_EXACTISH_SCAN(CoNd) \
-STMT_START { \
- re_fold_t folder; \
- switch (OP(c)) { \
- case EXACTFU: folder = foldEQ_latin1; break; \
- case EXACTFL: folder = foldEQ_locale; break; \
- case EXACTF: folder = foldEQ; break; \
- default: \
- Perl_croak(aTHX_ "panic: Unexpected op %u", OP(c)); \
- } \
- while (s <= e) { \
- if ( (CoNd) \
- && (ln == 1 || folder(s, m, ln)) \
- && (!reginfo || regtry(reginfo, &s)) ) \
- goto got_it; \
- s++; \
- } \
-} STMT_END
-
-#define REXEC_FBC_UTF8_SCAN(CoDe) \
-STMT_START { \
- while (s + (uskip = UTF8SKIP(s)) <= strend) { \
- CoDe \
- s += uskip; \
- } \
-} STMT_END
-
-#define REXEC_FBC_SCAN(CoDe) \
-STMT_START { \
- while (s < strend) { \
- CoDe \
- s++; \
- } \
-} STMT_END
-
-#define REXEC_FBC_UTF8_CLASS_SCAN(CoNd) \
-REXEC_FBC_UTF8_SCAN( \
- if (CoNd) { \
- if (tmp && (!reginfo || regtry(reginfo, &s))) \
- goto got_it; \
- else \
- tmp = doevery; \
- } \
- else \
- tmp = 1; \
-)
-
-#define REXEC_FBC_CLASS_SCAN(CoNd) \
-REXEC_FBC_SCAN( \
- if (CoNd) { \
- if (tmp && (!reginfo || regtry(reginfo, &s))) \
- goto got_it; \
- else \
- tmp = doevery; \
- } \
- else \
- tmp = 1; \
-)
-
-#define REXEC_FBC_TRYIT \
-if ((!reginfo || regtry(reginfo, &s))) \
- goto got_it
-
-#define REXEC_FBC_CSCAN(CoNdUtF8,CoNd) \
- if (utf8_target) { \
- REXEC_FBC_UTF8_CLASS_SCAN(CoNdUtF8); \
- } \
- else { \
- REXEC_FBC_CLASS_SCAN(CoNd); \
- } \
- break
-
-#define REXEC_FBC_CSCAN_PRELOAD(UtFpReLoAd,CoNdUtF8,CoNd) \
- if (utf8_target) { \
- UtFpReLoAd; \
- REXEC_FBC_UTF8_CLASS_SCAN(CoNdUtF8); \
- } \
- else { \
- REXEC_FBC_CLASS_SCAN(CoNd); \
- } \
- break
-
-#define REXEC_FBC_CSCAN_TAINT(CoNdUtF8,CoNd) \
- PL_reg_flags |= RF_tainted; \
- if (utf8_target) { \
- REXEC_FBC_UTF8_CLASS_SCAN(CoNdUtF8); \
- } \
- else { \
- REXEC_FBC_CLASS_SCAN(CoNd); \
- } \
- break
-
-#define DUMP_EXEC_POS(li,s,doutf8) \
- dump_exec_pos(li,s,(PL_regeol),(PL_bostr),(PL_reg_starttry),doutf8)
-
-/* We know what class REx starts with. Try to find this position... */
-/* if reginfo is NULL, its a dryrun */
-/* annoyingly all the vars in this routine have different names from their counterparts
- in regmatch. /grrr */
-
-STATIC char *
-S_find_byclass(pTHX_ regexp * prog, const regnode *c, char *s,
- const char *strend, regmatch_info *reginfo)
-{
- dVAR;
- const I32 doevery = (prog->intflags & PREGf_SKIP) == 0;
- char *m;
- STRLEN ln;
- STRLEN lnc;
- register STRLEN uskip;
- unsigned int c1;
- unsigned int c2;
- char *e;
- register I32 tmp = 1; /* Scratch variable? */
- register const bool utf8_target = PL_reg_match_utf8;
- RXi_GET_DECL(prog,progi);
-
- PERL_ARGS_ASSERT_FIND_BYCLASS;
-
- /* We know what class it must start with. */
- switch (OP(c)) {
- case ANYOF:
- if (utf8_target) {
- REXEC_FBC_UTF8_CLASS_SCAN((ANYOF_FLAGS(c) & ANYOF_NONBITMAP) ||
- !UTF8_IS_INVARIANT((U8)s[0]) ?
- reginclass(prog, c, (U8*)s, 0, utf8_target) :
- REGINCLASS(prog, c, (U8*)s));
- }
- else {
- while (s < strend) {
- STRLEN skip = 1;
-
- if (REGINCLASS(prog, c, (U8*)s) ||
- (ANYOF_FOLD_SHARP_S(c, s, strend) &&
- /* The assignment of 2 is intentional:
- * for the folded sharp s, the skip is 2. */
- (skip = SHARP_S_SKIP))) {
- if (tmp && (!reginfo || regtry(reginfo, &s)))
- goto got_it;
- else
- tmp = doevery;
- }
- else
- tmp = 1;
- s += skip;
- }
- }
- break;
- case CANY:
- REXEC_FBC_SCAN(
- if (tmp && (!reginfo || regtry(reginfo, &s)))
- goto got_it;
- else
- tmp = doevery;
- );
- break;
- case EXACTFU:
- case EXACTF:
- m = STRING(c);
- ln = STR_LEN(c); /* length to match in octets/bytes */
- lnc = (I32) ln; /* length to match in characters */
- if (UTF_PATTERN) {
- STRLEN ulen1, ulen2;
- U8 *sm = (U8 *) m;
- U8 tmpbuf1[UTF8_MAXBYTES_CASE+1];
- U8 tmpbuf2[UTF8_MAXBYTES_CASE+1];
- /* used by commented-out code below */
- /*const U32 uniflags = UTF8_ALLOW_DEFAULT;*/
-
- /* XXX: Since the node will be case folded at compile
- time this logic is a little odd, although im not
- sure that its actually wrong. --dmq */
-
- c1 = to_utf8_lower((U8*)m, tmpbuf1, &ulen1);
- c2 = to_utf8_upper((U8*)m, tmpbuf2, &ulen2);
-
- /* XXX: This is kinda strange. to_utf8_XYZ returns the
- codepoint of the first character in the converted
- form, yet originally we did the extra step.
- No tests fail by commenting this code out however
- so Ive left it out. -- dmq.
-
- c1 = utf8n_to_uvchr(tmpbuf1, UTF8_MAXBYTES_CASE,
- 0, uniflags);
- c2 = utf8n_to_uvchr(tmpbuf2, UTF8_MAXBYTES_CASE,
- 0, uniflags);
- */
-
- lnc = 0;
- while (sm < ((U8 *) m + ln)) {
- lnc++;
- sm += UTF8SKIP(sm);
- }
- }
- else {
- c1 = *(U8*)m;
- if (utf8_target || OP(c) == EXACTFU) {
-
- /* Micro sign folds to GREEK SMALL LETTER MU;
- LATIN_SMALL_LETTER_SHARP_S folds to 'ss', and this sets
- c2 to the first 's' of the pair, and the code below will
- look for others */
- c2 = (c1 == MICRO_SIGN)
- ? GREEK_SMALL_LETTER_MU
- : (c1 == LATIN_SMALL_LETTER_SHARP_S)
- ? 's'
- : PL_fold_latin1[c1];
- } else c2 = PL_fold[c1];
- }
- goto do_exactf;
- case EXACTFL:
- m = STRING(c);
- ln = STR_LEN(c);
- lnc = (I32) ln;
- c1 = *(U8*)m;
- c2 = PL_fold_locale[c1];
- do_exactf:
- e = HOP3c(strend, -((I32)lnc), s);
-
- if (!reginfo && e < s)
- e = s; /* Due to minlen logic of intuit() */
-
- /* The idea in the EXACTF* cases is to first find the
- * first character of the EXACTF* node and then, if
- * necessary, case-insensitively compare the full
- * text of the node. The c1 and c2 are the first
- * characters (though in Unicode it gets a bit
- * more complicated because there are more cases
- * than just upper and lower: one needs to use
- * the so-called folding case for case-insensitive
- * matching (called "loose matching" in Unicode).
- * foldEQ_utf8() will do just that. */
-
- if (utf8_target || UTF_PATTERN) {
- UV c, f;
- U8 tmpbuf [UTF8_MAXBYTES+1];
- STRLEN len = 1;
- STRLEN foldlen;
- const U32 uniflags = UTF8_ALLOW_DEFAULT;
- if (c1 == c2) {
- /* Upper and lower of 1st char are equal -
- * probably not a "letter". */
- while (s <= e) {
- if (utf8_target) {
- c = utf8n_to_uvchr((U8*)s, UTF8_MAXBYTES, &len,
- uniflags);
- } else {
- c = *((U8*)s);
- }
- REXEC_FBC_EXACTISH_CHECK(c == c1);
- }
- }
- else {
- while (s <= e) {
- if (utf8_target) {
- c = utf8n_to_uvchr((U8*)s, UTF8_MAXBYTES, &len,
- uniflags);
- } else {
- c = *((U8*)s);
- }
-
- /* Handle some of the three Greek sigmas cases.
- * Note that not all the possible combinations
- * are handled here: some of them are handled
- * by the standard folding rules, and some of
- * them (the character class or ANYOF cases)
- * are handled during compiletime in
- * regexec.c:S_regclass(). */
- if (c == (UV)UNICODE_GREEK_CAPITAL_LETTER_SIGMA ||
- c == (UV)UNICODE_GREEK_SMALL_LETTER_FINAL_SIGMA)
- c = (UV)UNICODE_GREEK_SMALL_LETTER_SIGMA;
-
- REXEC_FBC_EXACTISH_CHECK(c == c1 || c == c2);
- }
- }
- }
- else {
- /* Neither pattern nor string are UTF8 */
- if (c1 == c2)
- REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1);
- else
- REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1 || *(U8*)s == c2);
- }
- break;
- case BOUNDL:
- PL_reg_flags |= RF_tainted;
- /* FALL THROUGH */
- case BOUND:
- if (utf8_target) {
- if (s == PL_bostr)
- tmp = '\n';
- else {
- U8 * const r = reghop3((U8*)s, -1, (U8*)PL_bostr);
- tmp = utf8n_to_uvchr(r, UTF8SKIP(r), 0, UTF8_ALLOW_DEFAULT);
- }
- tmp = ((OP(c) == BOUND ?
- isALNUM_uni(tmp) : isALNUM_LC_uvchr(UNI_TO_NATIVE(tmp))) != 0);
- LOAD_UTF8_CHARCLASS_ALNUM();
- REXEC_FBC_UTF8_SCAN(
- if (tmp == !(OP(c) == BOUND ?
- cBOOL(swash_fetch(PL_utf8_alnum, (U8*)s, utf8_target)) :
- isALNUM_LC_utf8((U8*)s)))
- {
- tmp = !tmp;
- REXEC_FBC_TRYIT;
- }
- );
- }
- else { /* Not utf8 */
- tmp = (s != PL_bostr) ? UCHARAT(s - 1) : '\n';
- tmp = cBOOL((OP(c) == BOUNDL)
- ? isALNUM_LC(tmp)
- : (isWORDCHAR_L1(tmp)
- && (isASCII(tmp) || (FLAGS(c) & USE_UNI))));
- REXEC_FBC_SCAN(
- if (tmp ==
- !((OP(c) == BOUNDL)
- ? isALNUM_LC(*s)
- : (isWORDCHAR_L1((U8) *s)
- && (isASCII((U8) *s) || (FLAGS(c) & USE_UNI)))))
- {
- tmp = !tmp;
- REXEC_FBC_TRYIT;
- }
- );
- }
- if ((!prog->minlen && tmp) && (!reginfo || regtry(reginfo, &s)))
- goto got_it;
- break;
- case NBOUNDL:
- PL_reg_flags |= RF_tainted;
- /* FALL THROUGH */
- case NBOUND:
- if (utf8_target) {
- if (s == PL_bostr)
- tmp = '\n';
- else {
- U8 * const r = reghop3((U8*)s, -1, (U8*)PL_bostr);
- tmp = utf8n_to_uvchr(r, UTF8SKIP(r), 0, UTF8_ALLOW_DEFAULT);
- }
- tmp = ((OP(c) == NBOUND ?
- isALNUM_uni(tmp) : isALNUM_LC_uvchr(UNI_TO_NATIVE(tmp))) != 0);
- LOAD_UTF8_CHARCLASS_ALNUM();
- REXEC_FBC_UTF8_SCAN(
- if (tmp == !(OP(c) == NBOUND ?
- cBOOL(swash_fetch(PL_utf8_alnum, (U8*)s, utf8_target)) :
- isALNUM_LC_utf8((U8*)s)))
- tmp = !tmp;
- else REXEC_FBC_TRYIT;
- );
- }
- else {
- tmp = (s != PL_bostr) ? UCHARAT(s - 1) : '\n';
- tmp = cBOOL((OP(c) == NBOUNDL)
- ? isALNUM_LC(tmp)
- : (isWORDCHAR_L1(tmp)
- && (isASCII(tmp) || (FLAGS(c) & USE_UNI))));
- REXEC_FBC_SCAN(
- if (tmp == ! cBOOL(
- (OP(c) == NBOUNDL)
- ? isALNUM_LC(*s)
- : (isWORDCHAR_L1((U8) *s)
- && (isASCII((U8) *s) || (FLAGS(c) & USE_UNI)))))
- {
- tmp = !tmp;
- }
- else REXEC_FBC_TRYIT;
- );
- }
- if ((!prog->minlen && !tmp) && (!reginfo || regtry(reginfo, &s)))
- goto got_it;
- break;
- case ALNUM:
- REXEC_FBC_CSCAN_PRELOAD(
- LOAD_UTF8_CHARCLASS_PERL_WORD(),
- swash_fetch(RE_utf8_perl_word, (U8*)s, utf8_target),
- (FLAGS(c) & USE_UNI) ? isWORDCHAR_L1((U8) *s) : isALNUM(*s)
- );
- case ALNUML:
- REXEC_FBC_CSCAN_TAINT(
- isALNUM_LC_utf8((U8*)s),
- isALNUM_LC(*s)
- );
- case NALNUM:
- REXEC_FBC_CSCAN_PRELOAD(
- LOAD_UTF8_CHARCLASS_PERL_WORD(),
- !swash_fetch(RE_utf8_perl_word, (U8*)s, utf8_target),
- ! ((FLAGS(c) & USE_UNI) ? isWORDCHAR_L1((U8) *s) : isALNUM(*s))
- );
- case NALNUML:
- REXEC_FBC_CSCAN_TAINT(
- !isALNUM_LC_utf8((U8*)s),
- !isALNUM_LC(*s)
- );
- case SPACE:
- REXEC_FBC_CSCAN_PRELOAD(
- LOAD_UTF8_CHARCLASS_PERL_SPACE(),
- *s == ' ' || swash_fetch(RE_utf8_perl_space,(U8*)s, utf8_target),
- isSPACE_L1((U8) *s) && (isASCII((U8) *s) || (FLAGS(c) & USE_UNI))
- );
- case SPACEL:
- REXEC_FBC_CSCAN_TAINT(
- isSPACE_LC_utf8((U8*)s),
- isSPACE_LC(*s)
- );
- case NSPACE:
- REXEC_FBC_CSCAN_PRELOAD(
- LOAD_UTF8_CHARCLASS_PERL_SPACE(),
- !(*s == ' ' || swash_fetch(RE_utf8_perl_space,(U8*)s, utf8_target)),
- !(isSPACE_L1((U8) *s) && (isASCII((U8) *s) || (FLAGS(c) & USE_UNI)))
- );
- case NSPACEL:
- REXEC_FBC_CSCAN_TAINT(
- !isSPACE_LC_utf8((U8*)s),
- !isSPACE_LC(*s)
- );
- case DIGIT:
- REXEC_FBC_CSCAN_PRELOAD(
- LOAD_UTF8_CHARCLASS_POSIX_DIGIT(),
- swash_fetch(RE_utf8_posix_digit,(U8*)s, utf8_target),
- isDIGIT(*s)
- );
- case DIGITL:
- REXEC_FBC_CSCAN_TAINT(
- isDIGIT_LC_utf8((U8*)s),
- isDIGIT_LC(*s)
- );
- case NDIGIT:
- REXEC_FBC_CSCAN_PRELOAD(
- LOAD_UTF8_CHARCLASS_POSIX_DIGIT(),
- !swash_fetch(RE_utf8_posix_digit,(U8*)s, utf8_target),
- !isDIGIT(*s)
- );
- case NDIGITL:
- REXEC_FBC_CSCAN_TAINT(
- !isDIGIT_LC_utf8((U8*)s),
- !isDIGIT_LC(*s)
- );
- case LNBREAK:
- REXEC_FBC_CSCAN(
- is_LNBREAK_utf8(s),
- is_LNBREAK_latin1(s)
- );
- case VERTWS:
- REXEC_FBC_CSCAN(
- is_VERTWS_utf8(s),
- is_VERTWS_latin1(s)
- );
- case NVERTWS:
- REXEC_FBC_CSCAN(
- !is_VERTWS_utf8(s),
- !is_VERTWS_latin1(s)
- );
- case HORIZWS:
- REXEC_FBC_CSCAN(
- is_HORIZWS_utf8(s),
- is_HORIZWS_latin1(s)
- );
- case NHORIZWS:
- REXEC_FBC_CSCAN(
- !is_HORIZWS_utf8(s),
- !is_HORIZWS_latin1(s)
- );
- case AHOCORASICKC:
- case AHOCORASICK:
- {
- DECL_TRIE_TYPE(c);
- /* what trie are we using right now */
- reg_ac_data *aho
- = (reg_ac_data*)progi->data->data[ ARG( c ) ];
- reg_trie_data *trie
- = (reg_trie_data*)progi->data->data[ aho->trie ];
- HV *widecharmap = MUTABLE_HV(progi->data->data[ aho->trie + 1 ]);
-
- const char *last_start = strend - trie->minlen;
-#ifdef DEBUGGING
- const char *real_start = s;
-#endif
- STRLEN maxlen = trie->maxlen;
- SV *sv_points;
- U8 **points; /* map of where we were in the input string
- when reading a given char. For ASCII this
- is unnecessary overhead as the relationship
- is always 1:1, but for Unicode, especially
- case folded Unicode this is not true. */
- U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
- U8 *bitmap=NULL;
-
-
- GET_RE_DEBUG_FLAGS_DECL;
-
- /* We can't just allocate points here. We need to wrap it in
- * an SV so it gets freed properly if there is a croak while
- * running the match */
- ENTER;
- SAVETMPS;
- sv_points=newSV(maxlen * sizeof(U8 *));
- SvCUR_set(sv_points,
- maxlen * sizeof(U8 *));
- SvPOK_on(sv_points);
- sv_2mortal(sv_points);
- points=(U8**)SvPV_nolen(sv_points );
- if ( trie_type != trie_utf8_fold
- && (trie->bitmap || OP(c)==AHOCORASICKC) )
- {
- if (trie->bitmap)
- bitmap=(U8*)trie->bitmap;
- else
- bitmap=(U8*)ANYOF_BITMAP(c);
- }
- /* this is the Aho-Corasick algorithm modified a touch
- to include special handling for long "unknown char"
- sequences. The basic idea being that we use AC as long
- as we are dealing with a possible matching char, when
- we encounter an unknown char (and we have not encountered
- an accepting state) we scan forward until we find a legal
- starting char.
- AC matching is basically that of trie matching, except
- that when we encounter a failing transition, we fall back
- to the current states "fail state", and try the current char
- again, a process we repeat until we reach the root state,
- state 1, or a legal transition. If we fail on the root state
- then we can either terminate if we have reached an accepting
- state previously, or restart the entire process from the beginning
- if we have not.
-
- */
- while (s <= last_start) {
- const U32 uniflags = UTF8_ALLOW_DEFAULT;
- U8 *uc = (U8*)s;
- U16 charid = 0;
- U32 base = 1;
- U32 state = 1;
- UV uvc = 0;
- STRLEN len = 0;
- STRLEN foldlen = 0;
- U8 *uscan = (U8*)NULL;
- U8 *leftmost = NULL;
-#ifdef DEBUGGING
- U32 accepted_word= 0;
-#endif
- U32 pointpos = 0;
-
- while ( state && uc <= (U8*)strend ) {
- int failed=0;
- U32 word = aho->states[ state ].wordnum;
-
- if( state==1 ) {
- if ( bitmap ) {
- DEBUG_TRIE_EXECUTE_r(
- if ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
- dump_exec_pos( (char *)uc, c, strend, real_start,
- (char *)uc, utf8_target );
- PerlIO_printf( Perl_debug_log,
- " Scanning for legal start char...\n");
- }
- );
- if (utf8_target) {
- while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
- uc += UTF8SKIP(uc);
- }
- } else {
- while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
- uc++;
- }
- }
- s= (char *)uc;
- }
- if (uc >(U8*)last_start) break;
- }
-
- if ( word ) {
- U8 *lpos= points[ (pointpos - trie->wordinfo[word].len) % maxlen ];
- if (!leftmost || lpos < leftmost) {
- DEBUG_r(accepted_word=word);
- leftmost= lpos;
- }
- if (base==0) break;
-
- }
- points[pointpos++ % maxlen]= uc;
- REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc,
- uscan, len, uvc, charid, foldlen,
- foldbuf, uniflags);
- DEBUG_TRIE_EXECUTE_r({
- dump_exec_pos( (char *)uc, c, strend, real_start,
- s, utf8_target );
- PerlIO_printf(Perl_debug_log,
- " Charid:%3u CP:%4"UVxf" ",
- charid, uvc);
- });
-
- do {
-#ifdef DEBUGGING
- word = aho->states[ state ].wordnum;
-#endif
- base = aho->states[ state ].trans.base;
-
- DEBUG_TRIE_EXECUTE_r({
- if (failed)
- dump_exec_pos( (char *)uc, c, strend, real_start,
- s, utf8_target );
- PerlIO_printf( Perl_debug_log,
- "%sState: %4"UVxf", word=%"UVxf,
- failed ? " Fail transition to " : "",
- (UV)state, (UV)word);
- });
- if ( base ) {
- U32 tmp;
- I32 offset;
- if (charid &&
- ( ((offset = base + charid
- - 1 - trie->uniquecharcount)) >= 0)
- && ((U32)offset < trie->lasttrans)
- && trie->trans[offset].check == state
- && (tmp=trie->trans[offset].next))
- {
- DEBUG_TRIE_EXECUTE_r(
- PerlIO_printf( Perl_debug_log," - legal\n"));
- state = tmp;
- break;
- }
- else {
- DEBUG_TRIE_EXECUTE_r(
- PerlIO_printf( Perl_debug_log," - fail\n"));
- failed = 1;
- state = aho->fail[state];
- }
- }
- else {
- /* we must be accepting here */
- DEBUG_TRIE_EXECUTE_r(
- PerlIO_printf( Perl_debug_log," - accepting\n"));
- failed = 1;
- break;
- }
- } while(state);
- uc += len;
- if (failed) {
- if (leftmost)
- break;
- if (!state) state = 1;
- }
- }
- if ( aho->states[ state ].wordnum ) {
- U8 *lpos = points[ (pointpos - trie->wordinfo[aho->states[ state ].wordnum].len) % maxlen ];
- if (!leftmost || lpos < leftmost) {
- DEBUG_r(accepted_word=aho->states[ state ].wordnum);
- leftmost = lpos;
- }
- }
- if (leftmost) {
- s = (char*)leftmost;
- DEBUG_TRIE_EXECUTE_r({
- PerlIO_printf(
- Perl_debug_log,"Matches word #%"UVxf" at position %"IVdf". Trying full pattern...\n",
- (UV)accepted_word, (IV)(s - real_start)
- );
- });
- if (!reginfo || regtry(reginfo, &s)) {
- FREETMPS;
- LEAVE;
- goto got_it;
- }
- s = HOPc(s,1);
- DEBUG_TRIE_EXECUTE_r({
- PerlIO_printf( Perl_debug_log,"Pattern failed. Looking for new start point...\n");
- });
- } else {
- DEBUG_TRIE_EXECUTE_r(
- PerlIO_printf( Perl_debug_log,"No match.\n"));
- break;
- }
- }
- FREETMPS;
- LEAVE;
- }
- break;
- default:
- Perl_croak(aTHX_ "panic: unknown regstclass %d", (int)OP(c));
- break;
- }
- return 0;
- got_it:
- return s;
-}
-
-
-/*
- - regexec_flags - match a regexp against a string
- */
-I32
-Perl_regexec_flags(pTHX_ REGEXP * const rx, char *stringarg, register char *strend,
- char *strbeg, I32 minend, SV *sv, void *data, U32 flags)
-/* strend: pointer to null at end of string */
-/* strbeg: real beginning of string */
-/* minend: end of match must be >=minend after stringarg. */
-/* data: May be used for some additional optimizations.
- Currently its only used, with a U32 cast, for transmitting
- the ganch offset when doing a /g match. This will change */
-/* nosave: For optimizations. */
-{
- dVAR;
- struct regexp *const prog = (struct regexp *)SvANY(rx);
- /*register*/ char *s;
- register regnode *c;
- /*register*/ char *startpos = stringarg;
- I32 minlen; /* must match at least this many chars */
- I32 dontbother = 0; /* how many characters not to try at end */
- I32 end_shift = 0; /* Same for the end. */ /* CC */
- I32 scream_pos = -1; /* Internal iterator of scream. */
- char *scream_olds = NULL;
- const bool utf8_target = cBOOL(DO_UTF8(sv));
- I32 multiline;
- RXi_GET_DECL(prog,progi);
- regmatch_info reginfo; /* create some info to pass to regtry etc */
- regexp_paren_pair *swap = NULL;
- GET_RE_DEBUG_FLAGS_DECL;
-
- PERL_ARGS_ASSERT_REGEXEC_FLAGS;
- PERL_UNUSED_ARG(data);
-
- /* Be paranoid... */
- if (prog == NULL || startpos == NULL) {
- Perl_croak(aTHX_ "NULL regexp parameter");
- return 0;
- }
-
- multiline = prog->extflags & RXf_PMf_MULTILINE;
- reginfo.prog = rx; /* Yes, sorry that this is confusing. */
-
- RX_MATCH_UTF8_set(rx, utf8_target);
- DEBUG_EXECUTE_r(
- debug_start_match(rx, utf8_target, startpos, strend,
- "Matching");
- );
-
- minlen = prog->minlen;
-
- if (strend - startpos < (minlen+(prog->check_offset_min<0?prog->check_offset_min:0))) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "String too short [regexec_flags]...\n"));
- goto phooey;
- }
-
-
- /* Check validity of program. */
- if (UCHARAT(progi->program) != REG_MAGIC) {
- Perl_croak(aTHX_ "corrupted regexp program");
- }
-
- PL_reg_flags = 0;
- PL_reg_eval_set = 0;
- PL_reg_maxiter = 0;
-
- if (RX_UTF8(rx))
- PL_reg_flags |= RF_utf8;
-
- /* Mark beginning of line for ^ and lookbehind. */
- reginfo.bol = startpos; /* XXX not used ??? */
- PL_bostr = strbeg;
- reginfo.sv = sv;
-
- /* Mark end of line for $ (and such) */
- PL_regeol = strend;
-
- /* see how far we have to get to not match where we matched before */
- reginfo.till = startpos+minend;
-
- /* If there is a "must appear" string, look for it. */
- s = startpos;
-
- if (prog->extflags & RXf_GPOS_SEEN) { /* Need to set reginfo->ganch */
- MAGIC *mg;
- if (flags & REXEC_IGNOREPOS){ /* Means: check only at start */
- reginfo.ganch = startpos + prog->gofs;
- DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
- "GPOS IGNOREPOS: reginfo.ganch = startpos + %"UVxf"\n",(UV)prog->gofs));
- } else if (sv && SvTYPE(sv) >= SVt_PVMG
- && SvMAGIC(sv)
- && (mg = mg_find(sv, PERL_MAGIC_regex_global))
- && mg->mg_len >= 0) {
- reginfo.ganch = strbeg + mg->mg_len; /* Defined pos() */
- DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
- "GPOS MAGIC: reginfo.ganch = strbeg + %"IVdf"\n",(IV)mg->mg_len));
-
- if (prog->extflags & RXf_ANCH_GPOS) {
- if (s > reginfo.ganch)
- goto phooey;
- s = reginfo.ganch - prog->gofs;
- DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
- "GPOS ANCH_GPOS: s = ganch - %"UVxf"\n",(UV)prog->gofs));
- if (s < strbeg)
- goto phooey;
- }
- }
- else if (data) {
- reginfo.ganch = strbeg + PTR2UV(data);
- DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
- "GPOS DATA: reginfo.ganch= strbeg + %"UVxf"\n",PTR2UV(data)));
-
- } else { /* pos() not defined */
- reginfo.ganch = strbeg;
- DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
- "GPOS: reginfo.ganch = strbeg\n"));
- }
- }
- if (PL_curpm && (PM_GETRE(PL_curpm) == rx)) {
- /* We have to be careful. If the previous successful match
- was from this regex we don't want a subsequent partially
- successful match to clobber the old results.
- So when we detect this possibility we add a swap buffer
- to the re, and switch the buffer each match. If we fail
- we switch it back, otherwise we leave it swapped.
- */
- swap = prog->offs;
- /* do we need a save destructor here for eval dies? */
- Newxz(prog->offs, (prog->nparens + 1), regexp_paren_pair);
- }
- if (!(flags & REXEC_CHECKED) && (prog->check_substr != NULL || prog->check_utf8 != NULL)) {
- re_scream_pos_data d;
-
- d.scream_olds = &scream_olds;
- d.scream_pos = &scream_pos;
- s = re_intuit_start(rx, sv, s, strend, flags, &d);
- if (!s) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Not present...\n"));
- goto phooey; /* not present */
- }
- }
-
-
-
- /* Simplest case: anchored match need be tried only once. */
- /* [unless only anchor is BOL and multiline is set] */
- if (prog->extflags & (RXf_ANCH & ~RXf_ANCH_GPOS)) {
- if (s == startpos && regtry(®info, &startpos))
- goto got_it;
- else if (multiline || (prog->intflags & PREGf_IMPLICIT)
- || (prog->extflags & RXf_ANCH_MBOL)) /* XXXX SBOL? */
- {
- char *end;
-
- if (minlen)
- dontbother = minlen - 1;
- end = HOP3c(strend, -dontbother, strbeg) - 1;
- /* for multiline we only have to try after newlines */
- if (prog->check_substr || prog->check_utf8) {
- /* because of the goto we can not easily reuse the macros for bifurcating the
- unicode/non-unicode match modes here like we do elsewhere - demerphq */
- if (utf8_target) {
- if (s == startpos)
- goto after_try_utf8;
- while (1) {
- if (regtry(®info, &s)) {
- goto got_it;
- }
- after_try_utf8:
- if (s > end) {
- goto phooey;
- }
- if (prog->extflags & RXf_USE_INTUIT) {
- s = re_intuit_start(rx, sv, s + UTF8SKIP(s), strend, flags, NULL);
- if (!s) {
- goto phooey;
- }
- }
- else {
- s += UTF8SKIP(s);
- }
- }
- } /* end search for check string in unicode */
- else {
- if (s == startpos) {
- goto after_try_latin;
- }
- while (1) {
- if (regtry(®info, &s)) {
- goto got_it;
- }
- after_try_latin:
- if (s > end) {
- goto phooey;
- }
- if (prog->extflags & RXf_USE_INTUIT) {
- s = re_intuit_start(rx, sv, s + 1, strend, flags, NULL);
- if (!s) {
- goto phooey;
- }
- }
- else {
- s++;
- }
- }
- } /* end search for check string in latin*/
- } /* end search for check string */
- else { /* search for newline */
- if (s > startpos) {
- /*XXX: The s-- is almost definitely wrong here under unicode - demeprhq*/
- s--;
- }
- /* We can use a more efficient search as newlines are the same in unicode as they are in latin */
- while (s < end) {
- if (*s++ == '\n') { /* don't need PL_utf8skip here */
- if (regtry(®info, &s))
- goto got_it;
- }
- }
- } /* end search for newline */
- } /* end anchored/multiline check string search */
- goto phooey;
- } else if (RXf_GPOS_CHECK == (prog->extflags & RXf_GPOS_CHECK))
- {
- /* the warning about reginfo.ganch being used without intialization
- is bogus -- we set it above, when prog->extflags & RXf_GPOS_SEEN
- and we only enter this block when the same bit is set. */
- char *tmp_s = reginfo.ganch - prog->gofs;
-
- if (tmp_s >= strbeg && regtry(®info, &tmp_s))
- goto got_it;
- goto phooey;
- }
-
- /* Messy cases: unanchored match. */
- if ((prog->anchored_substr || prog->anchored_utf8) && prog->intflags & PREGf_SKIP) {
- /* we have /x+whatever/ */
- /* it must be a one character string (XXXX Except UTF_PATTERN?) */
- char ch;
-#ifdef DEBUGGING
- int did_match = 0;
-#endif
- if (!(utf8_target ? prog->anchored_utf8 : prog->anchored_substr))
- utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
- ch = SvPVX_const(utf8_target ? prog->anchored_utf8 : prog->anchored_substr)[0];
-
- if (utf8_target) {
- REXEC_FBC_SCAN(
- if (*s == ch) {
- DEBUG_EXECUTE_r( did_match = 1 );
- if (regtry(®info, &s)) goto got_it;
- s += UTF8SKIP(s);
- while (s < strend && *s == ch)
- s += UTF8SKIP(s);
- }
- );
- }
- else {
- REXEC_FBC_SCAN(
- if (*s == ch) {
- DEBUG_EXECUTE_r( did_match = 1 );
- if (regtry(®info, &s)) goto got_it;
- s++;
- while (s < strend && *s == ch)
- s++;
- }
- );
- }
- DEBUG_EXECUTE_r(if (!did_match)
- PerlIO_printf(Perl_debug_log,
- "Did not find anchored character...\n")
- );
- }
- else if (prog->anchored_substr != NULL
- || prog->anchored_utf8 != NULL
- || ((prog->float_substr != NULL || prog->float_utf8 != NULL)
- && prog->float_max_offset < strend - s)) {
- SV *must;
- I32 back_max;
- I32 back_min;
- char *last;
- char *last1; /* Last position checked before */
-#ifdef DEBUGGING
- int did_match = 0;
-#endif
- if (prog->anchored_substr || prog->anchored_utf8) {
- if (!(utf8_target ? prog->anchored_utf8 : prog->anchored_substr))
- utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
- must = utf8_target ? prog->anchored_utf8 : prog->anchored_substr;
- back_max = back_min = prog->anchored_offset;
- } else {
- if (!(utf8_target ? prog->float_utf8 : prog->float_substr))
- utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
- must = utf8_target ? prog->float_utf8 : prog->float_substr;
- back_max = prog->float_max_offset;
- back_min = prog->float_min_offset;
- }
-
-
- if (must == &PL_sv_undef)
- /* could not downgrade utf8 check substring, so must fail */
- goto phooey;
-
- if (back_min<0) {
- last = strend;
- } else {
- last = HOP3c(strend, /* Cannot start after this */
- -(I32)(CHR_SVLEN(must)
- - (SvTAIL(must) != 0) + back_min), strbeg);
- }
- if (s > PL_bostr)
- last1 = HOPc(s, -1);
- else
- last1 = s - 1; /* bogus */
-
- /* XXXX check_substr already used to find "s", can optimize if
- check_substr==must. */
- scream_pos = -1;
- dontbother = end_shift;
- strend = HOPc(strend, -dontbother);
- while ( (s <= last) &&
- ((flags & REXEC_SCREAM)
- ? (s = screaminstr(sv, must, HOP3c(s, back_min, (back_min<0 ? strbeg : strend)) - strbeg,
- end_shift, &scream_pos, 0))
- : (s = fbm_instr((unsigned char*)HOP3(s, back_min, (back_min<0 ? strbeg : strend)),
- (unsigned char*)strend, must,
- multiline ? FBMrf_MULTILINE : 0))) ) {
- /* we may be pointing at the wrong string */
- if ((flags & REXEC_SCREAM) && RXp_MATCH_COPIED(prog))
- s = strbeg + (s - SvPVX_const(sv));
- DEBUG_EXECUTE_r( did_match = 1 );
- if (HOPc(s, -back_max) > last1) {
- last1 = HOPc(s, -back_min);
- s = HOPc(s, -back_max);
- }
- else {
- char * const t = (last1 >= PL_bostr) ? HOPc(last1, 1) : last1 + 1;
-
- last1 = HOPc(s, -back_min);
- s = t;
- }
- if (utf8_target) {
- while (s <= last1) {
- if (regtry(®info, &s))
- goto got_it;
- s += UTF8SKIP(s);
- }
- }
- else {
- while (s <= last1) {
- if (regtry(®info, &s))
- goto got_it;
- s++;
- }
- }
- }
- DEBUG_EXECUTE_r(if (!did_match) {
- RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
- SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
- PerlIO_printf(Perl_debug_log, "Did not find %s substr %s%s...\n",
- ((must == prog->anchored_substr || must == prog->anchored_utf8)
- ? "anchored" : "floating"),
- quoted, RE_SV_TAIL(must));
- });
- goto phooey;
- }
- else if ( (c = progi->regstclass) ) {
- if (minlen) {
- const OPCODE op = OP(progi->regstclass);
- /* don't bother with what can't match */
- if (PL_regkind[op] != EXACT && op != CANY && PL_regkind[op] != TRIE)
- strend = HOPc(strend, -(minlen - 1));
- }
- DEBUG_EXECUTE_r({
- SV * const prop = sv_newmortal();
- regprop(prog, prop, c);
- {
- RE_PV_QUOTED_DECL(quoted,utf8_target,PERL_DEBUG_PAD_ZERO(1),
- s,strend-s,60);
- PerlIO_printf(Perl_debug_log,
- "Matching stclass %.*s against %s (%d bytes)\n",
- (int)SvCUR(prop), SvPVX_const(prop),
- quoted, (int)(strend - s));
- }
- });
- if (find_byclass(prog, c, s, strend, ®info))
- goto got_it;
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Contradicts stclass... [regexec_flags]\n"));
- }
- else {
- dontbother = 0;
- if (prog->float_substr != NULL || prog->float_utf8 != NULL) {
- /* Trim the end. */
- char *last;
- SV* float_real;
-
- if (!(utf8_target ? prog->float_utf8 : prog->float_substr))
- utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
- float_real = utf8_target ? prog->float_utf8 : prog->float_substr;
-
- if (flags & REXEC_SCREAM) {
- last = screaminstr(sv, float_real, s - strbeg,
- end_shift, &scream_pos, 1); /* last one */
- if (!last)
- last = scream_olds; /* Only one occurrence. */
- /* we may be pointing at the wrong string */
- else if (RXp_MATCH_COPIED(prog))
- s = strbeg + (s - SvPVX_const(sv));
- }
- else {
- STRLEN len;
- const char * const little = SvPV_const(float_real, len);
-
- if (SvTAIL(float_real)) {
- if (memEQ(strend - len + 1, little, len - 1))
- last = strend - len + 1;
- else if (!multiline)
- last = memEQ(strend - len, little, len)
- ? strend - len : NULL;
- else
- goto find_last;
- } else {
- find_last:
- if (len)
- last = rninstr(s, strend, little, little + len);
- else
- last = strend; /* matching "$" */
- }
- }
- if (last == NULL) {
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%sCan't trim the tail, match fails (should not happen)%s\n",
- PL_colors[4], PL_colors[5]));
- goto phooey; /* Should not happen! */
- }
- dontbother = strend - last + prog->float_min_offset;
- }
- if (minlen && (dontbother < minlen))
- dontbother = minlen - 1;
- strend -= dontbother; /* this one's always in bytes! */
- /* We don't know much -- general case. */
- if (utf8_target) {
- for (;;) {
- if (regtry(®info, &s))
- goto got_it;
- if (s >= strend)
- break;
- s += UTF8SKIP(s);
- };
- }
- else {
- do {
- if (regtry(®info, &s))
- goto got_it;
- } while (s++ < strend);
- }
- }
-
- /* Failure. */
- goto phooey;
-
-got_it:
- Safefree(swap);
- RX_MATCH_TAINTED_set(rx, PL_reg_flags & RF_tainted);
-
- if (PL_reg_eval_set)
- restore_pos(aTHX_ prog);
- if (RXp_PAREN_NAMES(prog))
- (void)hv_iterinit(RXp_PAREN_NAMES(prog));
-
- /* make sure $`, $&, $', and $digit will work later */
- if ( !(flags & REXEC_NOT_FIRST) ) {
- RX_MATCH_COPY_FREE(rx);
- if (flags & REXEC_COPY_STR) {
- const I32 i = PL_regeol - startpos + (stringarg - strbeg);
-#ifdef PERL_OLD_COPY_ON_WRITE
- if ((SvIsCOW(sv)
- || (SvFLAGS(sv) & CAN_COW_MASK) == CAN_COW_FLAGS)) {
- if (DEBUG_C_TEST) {
- PerlIO_printf(Perl_debug_log,
- "Copy on write: regexp capture, type %d\n",
- (int) SvTYPE(sv));
- }
- prog->saved_copy = sv_setsv_cow(prog->saved_copy, sv);
- prog->subbeg = (char *)SvPVX_const(prog->saved_copy);
- assert (SvPOKp(prog->saved_copy));
- } else
-#endif
- {
- RX_MATCH_COPIED_on(rx);
- s = savepvn(strbeg, i);
- prog->subbeg = s;
- }
- prog->sublen = i;
- }
- else {
- prog->subbeg = strbeg;
- prog->sublen = PL_regeol - strbeg; /* strend may have been modified */
- }
- }
-
- return 1;
-
-phooey:
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch failed%s\n",
- PL_colors[4], PL_colors[5]));
- if (PL_reg_eval_set)
- restore_pos(aTHX_ prog);
- if (swap) {
- /* we failed :-( roll it back */
- Safefree(prog->offs);
- prog->offs = swap;
- }
-
- return 0;
-}
-
-
-/*
- - regtry - try match at specific point
- */
-STATIC I32 /* 0 failure, 1 success */
-S_regtry(pTHX_ regmatch_info *reginfo, char **startpos)
-{
- dVAR;
- CHECKPOINT lastcp;
- REGEXP *const rx = reginfo->prog;
- regexp *const prog = (struct regexp *)SvANY(rx);
- RXi_GET_DECL(prog,progi);
- GET_RE_DEBUG_FLAGS_DECL;
-
- PERL_ARGS_ASSERT_REGTRY;
-
- reginfo->cutpoint=NULL;
-
- if ((prog->extflags & RXf_EVAL_SEEN) && !PL_reg_eval_set) {
- MAGIC *mg;
-
- PL_reg_eval_set = RS_init;
- DEBUG_EXECUTE_r(DEBUG_s(
- PerlIO_printf(Perl_debug_log, " setting stack tmpbase at %"IVdf"\n",
- (IV)(PL_stack_sp - PL_stack_base));
- ));
- SAVESTACK_CXPOS();
- cxstack[cxstack_ix].blk_oldsp = PL_stack_sp - PL_stack_base;
- /* Otherwise OP_NEXTSTATE will free whatever on stack now. */
- SAVETMPS;
- /* Apparently this is not needed, judging by wantarray. */
- /* SAVEI8(cxstack[cxstack_ix].blk_gimme);
- cxstack[cxstack_ix].blk_gimme = G_SCALAR; */
-
- if (reginfo->sv) {
- /* Make $_ available to executed code. */
- if (reginfo->sv != DEFSV) {
- SAVE_DEFSV;
- DEFSV_set(reginfo->sv);
- }
-
- if (!(SvTYPE(reginfo->sv) >= SVt_PVMG && SvMAGIC(reginfo->sv)
- && (mg = mg_find(reginfo->sv, PERL_MAGIC_regex_global)))) {
- /* prepare for quick setting of pos */
-#ifdef PERL_OLD_COPY_ON_WRITE
- if (SvIsCOW(reginfo->sv))
- sv_force_normal_flags(reginfo->sv, 0);
-#endif
- mg = sv_magicext(reginfo->sv, NULL, PERL_MAGIC_regex_global,
- &PL_vtbl_mglob, NULL, 0);
- mg->mg_len = -1;
- }
- PL_reg_magic = mg;
- PL_reg_oldpos = mg->mg_len;
- SAVEDESTRUCTOR_X(restore_pos, prog);
- }
- if (!PL_reg_curpm) {
- Newxz(PL_reg_curpm, 1, PMOP);
-#ifdef USE_ITHREADS
- {
- SV* const repointer = &PL_sv_undef;
- /* this regexp is also owned by the new PL_reg_curpm, which
- will try to free it. */
- av_push(PL_regex_padav, repointer);
- PL_reg_curpm->op_pmoffset = av_len(PL_regex_padav);
- PL_regex_pad = AvARRAY(PL_regex_padav);
- }
-#endif
- }
-#ifdef USE_ITHREADS
- /* It seems that non-ithreads works both with and without this code.
- So for efficiency reasons it seems best not to have the code
- compiled when it is not needed. */
- /* This is safe against NULLs: */
- ReREFCNT_dec(PM_GETRE(PL_reg_curpm));
- /* PM_reg_curpm owns a reference to this regexp. */
- ReREFCNT_inc(rx);
-#endif
- PM_SETRE(PL_reg_curpm, rx);
- PL_reg_oldcurpm = PL_curpm;
- PL_curpm = PL_reg_curpm;
- if (RXp_MATCH_COPIED(prog)) {
- /* Here is a serious problem: we cannot rewrite subbeg,
- since it may be needed if this match fails. Thus
- $` inside (?{}) could fail... */
- PL_reg_oldsaved = prog->subbeg;
- PL_reg_oldsavedlen = prog->sublen;
-#ifdef PERL_OLD_COPY_ON_WRITE
- PL_nrs = prog->saved_copy;
-#endif
- RXp_MATCH_COPIED_off(prog);
- }
- else
- PL_reg_oldsaved = NULL;
- prog->subbeg = PL_bostr;
- prog->sublen = PL_regeol - PL_bostr; /* strend may have been modified */
- }
- DEBUG_EXECUTE_r(PL_reg_starttry = *startpos);
- prog->offs[0].start = *startpos - PL_bostr;
- PL_reginput = *startpos;
- PL_reglastparen = &prog->lastparen;
- PL_reglastcloseparen = &prog->lastcloseparen;
- prog->lastparen = 0;
- prog->lastcloseparen = 0;
- PL_regsize = 0;
- PL_regoffs = prog->offs;
- if (PL_reg_start_tmpl <= prog->nparens) {
- PL_reg_start_tmpl = prog->nparens*3/2 + 3;
- if(PL_reg_start_tmp)
- Renew(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
- else
- Newx(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
- }
-
- /* XXXX What this code is doing here?!!! There should be no need
- to do this again and again, PL_reglastparen should take care of
- this! --ilya*/
-
- /* Tests pat.t#187 and split.t#{13,14} seem to depend on this code.
- * Actually, the code in regcppop() (which Ilya may be meaning by
- * PL_reglastparen), is not needed at all by the test suite
- * (op/regexp, op/pat, op/split), but that code is needed otherwise
- * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
- * Meanwhile, this code *is* needed for the
- * above-mentioned test suite tests to succeed. The common theme
- * on those tests seems to be returning null fields from matches.
- * --jhi updated by dapm */
-#if 1
- if (prog->nparens) {
- regexp_paren_pair *pp = PL_regoffs;
- register I32 i;
- for (i = prog->nparens; i > (I32)*PL_reglastparen; i--) {
- ++pp;
- pp->start = -1;
- pp->end = -1;
- }
- }
-#endif
- REGCP_SET(lastcp);
- if (regmatch(reginfo, progi->program + 1)) {
- PL_regoffs[0].end = PL_reginput - PL_bostr;
- return 1;
- }
- if (reginfo->cutpoint)
- *startpos= reginfo->cutpoint;
- REGCP_UNWIND(lastcp);
- return 0;
-}
-
-
-#define sayYES goto yes
-#define sayNO goto no
-#define sayNO_SILENT goto no_silent
-
-/* we dont use STMT_START/END here because it leads to
- "unreachable code" warnings, which are bogus, but distracting. */
-#define CACHEsayNO \
- if (ST.cache_mask) \
- PL_reg_poscache[ST.cache_offset] |= ST.cache_mask; \
- sayNO
-
-/* this is used to determine how far from the left messages like
- 'failed...' are printed. It should be set such that messages
- are inline with the regop output that created them.
-*/
-#define REPORT_CODE_OFF 32
-
-
-#define CHRTEST_UNINIT -1001 /* c1/c2 haven't been calculated yet */
-#define CHRTEST_VOID -1000 /* the c1/c2 "next char" test should be skipped */
-
-#define SLAB_FIRST(s) (&(s)->states[0])
-#define SLAB_LAST(s) (&(s)->states[PERL_REGMATCH_SLAB_SLOTS-1])
-
-/* grab a new slab and return the first slot in it */
-
-STATIC regmatch_state *
-S_push_slab(pTHX)
-{
-#if PERL_VERSION < 9 && !defined(PERL_CORE)
- dMY_CXT;
-#endif
- regmatch_slab *s = PL_regmatch_slab->next;
- if (!s) {
- Newx(s, 1, regmatch_slab);
- s->prev = PL_regmatch_slab;
- s->next = NULL;
- PL_regmatch_slab->next = s;
- }
- PL_regmatch_slab = s;
- return SLAB_FIRST(s);
-}
-
-
-/* push a new state then goto it */
-
-#define PUSH_STATE_GOTO(state, node) \
- scan = node; \
- st->resume_state = state; \
- goto push_state;
-
-/* push a new state with success backtracking, then goto it */
-
-#define PUSH_YES_STATE_GOTO(state, node) \
- scan = node; \
- st->resume_state = state; \
- goto push_yes_state;
-
-
-
-/*
-
-regmatch() - main matching routine
-
-This is basically one big switch statement in a loop. We execute an op,
-set 'next' to point the next op, and continue. If we come to a point which
-we may need to backtrack to on failure such as (A|B|C), we push a
-backtrack state onto the backtrack stack. On failure, we pop the top
-state, and re-enter the loop at the state indicated. If there are no more
-states to pop, we return failure.
-
-Sometimes we also need to backtrack on success; for example /A+/, where
-after successfully matching one A, we need to go back and try to
-match another one; similarly for lookahead assertions: if the assertion
-completes successfully, we backtrack to the state just before the assertion
-and then carry on. In these cases, the pushed state is marked as
-'backtrack on success too'. This marking is in fact done by a chain of
-pointers, each pointing to the previous 'yes' state. On success, we pop to
-the nearest yes state, discarding any intermediate failure-only states.
-Sometimes a yes state is pushed just to force some cleanup code to be
-called at the end of a successful match or submatch; e.g. (??{$re}) uses
-it to free the inner regex.
-
-Note that failure backtracking rewinds the cursor position, while
-success backtracking leaves it alone.
-
-A pattern is complete when the END op is executed, while a subpattern
-such as (?=foo) is complete when the SUCCESS op is executed. Both of these
-ops trigger the "pop to last yes state if any, otherwise return true"
-behaviour.
-
-A common convention in this function is to use A and B to refer to the two
-subpatterns (or to the first nodes thereof) in patterns like /A*B/: so A is
-the subpattern to be matched possibly multiple times, while B is the entire
-rest of the pattern. Variable and state names reflect this convention.
-
-The states in the main switch are the union of ops and failure/success of
-substates associated with with that op. For example, IFMATCH is the op
-that does lookahead assertions /(?=A)B/ and so the IFMATCH state means
-'execute IFMATCH'; while IFMATCH_A is a state saying that we have just
-successfully matched A and IFMATCH_A_fail is a state saying that we have
-just failed to match A. Resume states always come in pairs. The backtrack
-state we push is marked as 'IFMATCH_A', but when that is popped, we resume
-at IFMATCH_A or IFMATCH_A_fail, depending on whether we are backtracking
-on success or failure.
-
-The struct that holds a backtracking state is actually a big union, with
-one variant for each major type of op. The variable st points to the
-top-most backtrack struct. To make the code clearer, within each
-block of code we #define ST to alias the relevant union.
-
-Here's a concrete example of a (vastly oversimplified) IFMATCH
-implementation:
-
- switch (state) {
- ....
-
-#define ST st->u.ifmatch
-
- case IFMATCH: // we are executing the IFMATCH op, (?=A)B
- ST.foo = ...; // some state we wish to save
- ...
- // push a yes backtrack state with a resume value of
- // IFMATCH_A/IFMATCH_A_fail, then continue execution at the
- // first node of A:
- PUSH_YES_STATE_GOTO(IFMATCH_A, A);
- // NOTREACHED
-
- case IFMATCH_A: // we have successfully executed A; now continue with B
- next = B;
- bar = ST.foo; // do something with the preserved value
- break;
-
- case IFMATCH_A_fail: // A failed, so the assertion failed
- ...; // do some housekeeping, then ...
- sayNO; // propagate the failure
-
-#undef ST
-
- ...
- }
-
-For any old-timers reading this who are familiar with the old recursive
-approach, the code above is equivalent to:
-
- case IFMATCH: // we are executing the IFMATCH op, (?=A)B
- {
- int foo = ...
- ...
- if (regmatch(A)) {
- next = B;
- bar = foo;
- break;
- }
- ...; // do some housekeeping, then ...
- sayNO; // propagate the failure
- }
-
-The topmost backtrack state, pointed to by st, is usually free. If you
-want to claim it, populate any ST.foo fields in it with values you wish to
-save, then do one of
-
- PUSH_STATE_GOTO(resume_state, node);
- PUSH_YES_STATE_GOTO(resume_state, node);
-
-which sets that backtrack state's resume value to 'resume_state', pushes a
-new free entry to the top of the backtrack stack, then goes to 'node'.
-On backtracking, the free slot is popped, and the saved state becomes the
-new free state. An ST.foo field in this new top state can be temporarily
-accessed to retrieve values, but once the main loop is re-entered, it
-becomes available for reuse.
-
-Note that the depth of the backtrack stack constantly increases during the
-left-to-right execution of the pattern, rather than going up and down with
-the pattern nesting. For example the stack is at its maximum at Z at the
-end of the pattern, rather than at X in the following:
-
- /(((X)+)+)+....(Y)+....Z/
-
-The only exceptions to this are lookahead/behind assertions and the cut,
-(?>A), which pop all the backtrack states associated with A before
-continuing.
-
-Bascktrack state structs are allocated in slabs of about 4K in size.
-PL_regmatch_state and st always point to the currently active state,
-and PL_regmatch_slab points to the slab currently containing
-PL_regmatch_state. The first time regmatch() is called, the first slab is
-allocated, and is never freed until interpreter destruction. When the slab
-is full, a new one is allocated and chained to the end. At exit from
-regmatch(), slabs allocated since entry are freed.
-
-*/
-
-
-#define DEBUG_STATE_pp(pp) \
- DEBUG_STATE_r({ \
- DUMP_EXEC_POS(locinput, scan, utf8_target); \
- PerlIO_printf(Perl_debug_log, \
- " %*s"pp" %s%s%s%s%s\n", \
- depth*2, "", \
- PL_reg_name[st->resume_state], \
- ((st==yes_state||st==mark_state) ? "[" : ""), \
- ((st==yes_state) ? "Y" : ""), \
- ((st==mark_state) ? "M" : ""), \
- ((st==yes_state||st==mark_state) ? "]" : "") \
- ); \
- });
-
-
-#define REG_NODE_NUM(x) ((x) ? (int)((x)-prog) : -1)
-
-#ifdef DEBUGGING
-
-STATIC void
-S_debug_start_match(pTHX_ const REGEXP *prog, const bool utf8_target,
- const char *start, const char *end, const char *blurb)
-{
- const bool utf8_pat = RX_UTF8(prog) ? 1 : 0;
-
- PERL_ARGS_ASSERT_DEBUG_START_MATCH;
-
- if (!PL_colorset)
- reginitcolors();
- {
- RE_PV_QUOTED_DECL(s0, utf8_pat, PERL_DEBUG_PAD_ZERO(0),
- RX_PRECOMP_const(prog), RX_PRELEN(prog), 60);
-
- RE_PV_QUOTED_DECL(s1, utf8_target, PERL_DEBUG_PAD_ZERO(1),
- start, end - start, 60);
-
- PerlIO_printf(Perl_debug_log,
- "%s%s REx%s %s against %s\n",
- PL_colors[4], blurb, PL_colors[5], s0, s1);
-
- if (utf8_target||utf8_pat)
- PerlIO_printf(Perl_debug_log, "UTF-8 %s%s%s...\n",
- utf8_pat ? "pattern" : "",
- utf8_pat && utf8_target ? " and " : "",
- utf8_target ? "string" : ""
- );
- }
-}
-
-STATIC void
-S_dump_exec_pos(pTHX_ const char *locinput,
- const regnode *scan,
- const char *loc_regeol,
- const char *loc_bostr,
- const char *loc_reg_starttry,
- const bool utf8_target)
-{
- const int docolor = *PL_colors[0] || *PL_colors[2] || *PL_colors[4];
- const int taill = (docolor ? 10 : 7); /* 3 chars for "> <" */
- int l = (loc_regeol - locinput) > taill ? taill : (loc_regeol - locinput);
- /* The part of the string before starttry has one color
- (pref0_len chars), between starttry and current
- position another one (pref_len - pref0_len chars),
- after the current position the third one.
- We assume that pref0_len <= pref_len, otherwise we
- decrease pref0_len. */
- int pref_len = (locinput - loc_bostr) > (5 + taill) - l
- ? (5 + taill) - l : locinput - loc_bostr;
- int pref0_len;
-
- PERL_ARGS_ASSERT_DUMP_EXEC_POS;
-
- while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput - pref_len)))
- pref_len++;
- pref0_len = pref_len - (locinput - loc_reg_starttry);
- if (l + pref_len < (5 + taill) && l < loc_regeol - locinput)
- l = ( loc_regeol - locinput > (5 + taill) - pref_len
- ? (5 + taill) - pref_len : loc_regeol - locinput);
- while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput + l)))
- l--;
- if (pref0_len < 0)
- pref0_len = 0;
- if (pref0_len > pref_len)
- pref0_len = pref_len;
- {
- const int is_uni = (utf8_target && OP(scan) != CANY) ? 1 : 0;
-
- RE_PV_COLOR_DECL(s0,len0,is_uni,PERL_DEBUG_PAD(0),
- (locinput - pref_len),pref0_len, 60, 4, 5);
-
- RE_PV_COLOR_DECL(s1,len1,is_uni,PERL_DEBUG_PAD(1),
- (locinput - pref_len + pref0_len),
- pref_len - pref0_len, 60, 2, 3);
-
- RE_PV_COLOR_DECL(s2,len2,is_uni,PERL_DEBUG_PAD(2),
- locinput, loc_regeol - locinput, 10, 0, 1);
-
- const STRLEN tlen=len0+len1+len2;
- PerlIO_printf(Perl_debug_log,
- "%4"IVdf" <%.*s%.*s%s%.*s>%*s|",
- (IV)(locinput - loc_bostr),
- len0, s0,
- len1, s1,
- (docolor ? "" : "> <"),
- len2, s2,
- (int)(tlen > 19 ? 0 : 19 - tlen),
- "");
- }
-}
-
-#endif
-
-/* reg_check_named_buff_matched()
- * Checks to see if a named buffer has matched. The data array of
- * buffer numbers corresponding to the buffer is expected to reside
- * in the regexp->data->data array in the slot stored in the ARG() of
- * node involved. Note that this routine doesn't actually care about the
- * name, that information is not preserved from compilation to execution.
- * Returns the index of the leftmost defined buffer with the given name
- * or 0 if non of the buffers matched.
- */
-STATIC I32
-S_reg_check_named_buff_matched(pTHX_ const regexp *rex, const regnode *scan)
-{
- I32 n;
- RXi_GET_DECL(rex,rexi);
- SV *sv_dat= MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
- I32 *nums=(I32*)SvPVX(sv_dat);
-
- PERL_ARGS_ASSERT_REG_CHECK_NAMED_BUFF_MATCHED;
-
- for ( n=0; n<SvIVX(sv_dat); n++ ) {
- if ((I32)*PL_reglastparen >= nums[n] &&
- PL_regoffs[nums[n]].end != -1)
- {
- return nums[n];
- }
- }
- return 0;
-}
-
-
-/* free all slabs above current one - called during LEAVE_SCOPE */
-
-STATIC void
-S_clear_backtrack_stack(pTHX_ void *p)
-{
- regmatch_slab *s = PL_regmatch_slab->next;
- PERL_UNUSED_ARG(p);
-
- if (!s)
- return;
- PL_regmatch_slab->next = NULL;
- while (s) {
- regmatch_slab * const osl = s;
- s = s->next;
- Safefree(osl);
- }
-}
-
-
-#define SETREX(Re1,Re2) \
- if (PL_reg_eval_set) PM_SETRE((PL_reg_curpm), (Re2)); \
- Re1 = (Re2)
-
-STATIC I32 /* 0 failure, 1 success */
-S_regmatch(pTHX_ regmatch_info *reginfo, regnode *prog)
-{
-#if PERL_VERSION < 9 && !defined(PERL_CORE)
- dMY_CXT;
-#endif
- dVAR;
- register const bool utf8_target = PL_reg_match_utf8;
- const U32 uniflags = UTF8_ALLOW_DEFAULT;
- REGEXP *rex_sv = reginfo->prog;
- regexp *rex = (struct regexp *)SvANY(rex_sv);
- RXi_GET_DECL(rex,rexi);
- I32 oldsave;
- /* the current state. This is a cached copy of PL_regmatch_state */
- register regmatch_state *st;
- /* cache heavy used fields of st in registers */
- register regnode *scan;
- register regnode *next;
- register U32 n = 0; /* general value; init to avoid compiler warning */
- register I32 ln = 0; /* len or last; init to avoid compiler warning */
- register char *locinput = PL_reginput;
- register I32 nextchr; /* is always set to UCHARAT(locinput) */
-
- bool result = 0; /* return value of S_regmatch */
- int depth = 0; /* depth of backtrack stack */
- U32 nochange_depth = 0; /* depth of GOSUB recursion with nochange */
- const U32 max_nochange_depth =
- (3 * rex->nparens > MAX_RECURSE_EVAL_NOCHANGE_DEPTH) ?
- 3 * rex->nparens : MAX_RECURSE_EVAL_NOCHANGE_DEPTH;
- regmatch_state *yes_state = NULL; /* state to pop to on success of
- subpattern */
- /* mark_state piggy backs on the yes_state logic so that when we unwind
- the stack on success we can update the mark_state as we go */
- regmatch_state *mark_state = NULL; /* last mark state we have seen */
- regmatch_state *cur_eval = NULL; /* most recent EVAL_AB state */
- struct regmatch_state *cur_curlyx = NULL; /* most recent curlyx */
- U32 state_num;
- bool no_final = 0; /* prevent failure from backtracking? */
- bool do_cutgroup = 0; /* no_final only until next branch/trie entry */
- char *startpoint = PL_reginput;
- SV *popmark = NULL; /* are we looking for a mark? */
- SV *sv_commit = NULL; /* last mark name seen in failure */
- SV *sv_yes_mark = NULL; /* last mark name we have seen
- during a successfull match */
- U32 lastopen = 0; /* last open we saw */
- bool has_cutgroup = RX_HAS_CUTGROUP(rex) ? 1 : 0;
- SV* const oreplsv = GvSV(PL_replgv);
- /* these three flags are set by various ops to signal information to
- * the very next op. They have a useful lifetime of exactly one loop
- * iteration, and are not preserved or restored by state pushes/pops
- */
- bool sw = 0; /* the condition value in (?(cond)a|b) */
- bool minmod = 0; /* the next "{n,m}" is a "{n,m}?" */
- int logical = 0; /* the following EVAL is:
- 0: (?{...})
- 1: (?(?{...})X|Y)
- 2: (??{...})
- or the following IFMATCH/UNLESSM is:
- false: plain (?=foo)
- true: used as a condition: (?(?=foo))
- */
-#ifdef DEBUGGING
- GET_RE_DEBUG_FLAGS_DECL;
-#endif
-
- PERL_ARGS_ASSERT_REGMATCH;
-
- DEBUG_OPTIMISE_r( DEBUG_EXECUTE_r({
- PerlIO_printf(Perl_debug_log,"regmatch start\n");
- }));
- /* on first ever call to regmatch, allocate first slab */
- if (!PL_regmatch_slab) {
- Newx(PL_regmatch_slab, 1, regmatch_slab);
- PL_regmatch_slab->prev = NULL;
- PL_regmatch_slab->next = NULL;
- PL_regmatch_state = SLAB_FIRST(PL_regmatch_slab);
- }
-
- oldsave = PL_savestack_ix;
- SAVEDESTRUCTOR_X(S_clear_backtrack_stack, NULL);
- SAVEVPTR(PL_regmatch_slab);
- SAVEVPTR(PL_regmatch_state);
-
- /* grab next free state slot */
- st = ++PL_regmatch_state;
- if (st > SLAB_LAST(PL_regmatch_slab))
- st = PL_regmatch_state = S_push_slab(aTHX);
-
- /* Note that nextchr is a byte even in UTF */
- nextchr = UCHARAT(locinput);
- scan = prog;
- while (scan != NULL) {
-
- DEBUG_EXECUTE_r( {
- SV * const prop = sv_newmortal();
- regnode *rnext=regnext(scan);
- DUMP_EXEC_POS( locinput, scan, utf8_target );
- regprop(rex, prop, scan);
-
- PerlIO_printf(Perl_debug_log,
- "%3"IVdf":%*s%s(%"IVdf")\n",
- (IV)(scan - rexi->program), depth*2, "",
- SvPVX_const(prop),
- (PL_regkind[OP(scan)] == END || !rnext) ?
- 0 : (IV)(rnext - rexi->program));
- });
-
- next = scan + NEXT_OFF(scan);
- if (next == scan)
- next = NULL;
- state_num = OP(scan);
-
- reenter_switch:
-
- assert(PL_reglastparen == &rex->lastparen);
- assert(PL_reglastcloseparen == &rex->lastcloseparen);
- assert(PL_regoffs == rex->offs);
-
- switch (state_num) {
- case BOL:
- if (locinput == PL_bostr)
- {
- /* reginfo->till = reginfo->bol; */
- break;
- }
- sayNO;
- case MBOL:
- if (locinput == PL_bostr ||
- ((nextchr || locinput < PL_regeol) && locinput[-1] == '\n'))
- {
- break;
- }
- sayNO;
- case SBOL:
- if (locinput == PL_bostr)
- break;
- sayNO;
- case GPOS:
- if (locinput == reginfo->ganch)
- break;
- sayNO;
-
- case KEEPS:
- /* update the startpoint */
- st->u.keeper.val = PL_regoffs[0].start;
- PL_reginput = locinput;
- PL_regoffs[0].start = locinput - PL_bostr;
- PUSH_STATE_GOTO(KEEPS_next, next);
- /*NOT-REACHED*/
- case KEEPS_next_fail:
- /* rollback the start point change */
- PL_regoffs[0].start = st->u.keeper.val;
- sayNO_SILENT;
- /*NOT-REACHED*/
- case EOL:
- goto seol;
- case MEOL:
- if ((nextchr || locinput < PL_regeol) && nextchr != '\n')
- sayNO;
- break;
- case SEOL:
- seol:
- if ((nextchr || locinput < PL_regeol) && nextchr != '\n')
- sayNO;
- if (PL_regeol - locinput > 1)
- sayNO;
- break;
- case EOS:
- if (PL_regeol != locinput)
- sayNO;
- break;
- case SANY:
- if (!nextchr && locinput >= PL_regeol)
- sayNO;
- if (utf8_target) {
- locinput += PL_utf8skip[nextchr];
- if (locinput > PL_regeol)
- sayNO;
- nextchr = UCHARAT(locinput);
- }
- else
- nextchr = UCHARAT(++locinput);
- break;
- case CANY:
- if (!nextchr && locinput >= PL_regeol)
- sayNO;
- nextchr = UCHARAT(++locinput);
- break;
- case REG_ANY:
- if ((!nextchr && locinput >= PL_regeol) || nextchr == '\n')
- sayNO;
- if (utf8_target) {
- locinput += PL_utf8skip[nextchr];
- if (locinput > PL_regeol)
- sayNO;
- nextchr = UCHARAT(locinput);
- }
- else
- nextchr = UCHARAT(++locinput);
- break;
-
-#undef ST
-#define ST st->u.trie
- case TRIEC:
- /* In this case the charclass data is available inline so
- we can fail fast without a lot of extra overhead.
- */
- if (scan->flags == EXACT || !utf8_target) {
- if(!ANYOF_BITMAP_TEST(scan, *locinput)) {
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s %sfailed to match trie start class...%s\n",
- REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
- );
- sayNO_SILENT;
- /* NOTREACHED */
- }
- }
- /* FALL THROUGH */
- case TRIE:
- /* the basic plan of execution of the trie is:
- * At the beginning, run though all the states, and
- * find the longest-matching word. Also remember the position
- * of the shortest matching word. For example, this pattern:
- * 1 2 3 4 5
- * ab|a|x|abcd|abc
- * when matched against the string "abcde", will generate
- * accept states for all words except 3, with the longest
- * matching word being 4, and the shortest being 1 (with
- * the position being after char 1 of the string).
- *
- * Then for each matching word, in word order (i.e. 1,2,4,5),
- * we run the remainder of the pattern; on each try setting
- * the current position to the character following the word,
- * returning to try the next word on failure.
- *
- * We avoid having to build a list of words at runtime by
- * using a compile-time structure, wordinfo[].prev, which
- * gives, for each word, the previous accepting word (if any).
- * In the case above it would contain the mappings 1->2, 2->0,
- * 3->0, 4->5, 5->1. We can use this table to generate, from
- * the longest word (4 above), a list of all words, by
- * following the list of prev pointers; this gives us the
- * unordered list 4,5,1,2. Then given the current word we have
- * just tried, we can go through the list and find the
- * next-biggest word to try (so if we just failed on word 2,
- * the next in the list is 4).
- *
- * Since at runtime we don't record the matching position in
- * the string for each word, we have to work that out for
- * each word we're about to process. The wordinfo table holds
- * the character length of each word; given that we recorded
- * at the start: the position of the shortest word and its
- * length in chars, we just need to move the pointer the
- * difference between the two char lengths. Depending on
- * Unicode status and folding, that's cheap or expensive.
- *
- * This algorithm is optimised for the case where are only a
- * small number of accept states, i.e. 0,1, or maybe 2.
- * With lots of accepts states, and having to try all of them,
- * it becomes quadratic on number of accept states to find all
- * the next words.
- */
-
- {
- /* what type of TRIE am I? (utf8 makes this contextual) */
- DECL_TRIE_TYPE(scan);
-
- /* what trie are we using right now */
- reg_trie_data * const trie
- = (reg_trie_data*)rexi->data->data[ ARG( scan ) ];
- HV * widecharmap = MUTABLE_HV(rexi->data->data[ ARG( scan ) + 1 ]);
- U32 state = trie->startstate;
-
- if (trie->bitmap && trie_type != trie_utf8_fold &&
- !TRIE_BITMAP_TEST(trie,*locinput)
- ) {
- if (trie->states[ state ].wordnum) {
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s %smatched empty string...%s\n",
- REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
- );
- if (!trie->jump)
- break;
- } else {
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s %sfailed to match trie start class...%s\n",
- REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
- );
- sayNO_SILENT;
- }
- }
-
- {
- U8 *uc = ( U8* )locinput;
-
- STRLEN len = 0;
- STRLEN foldlen = 0;
- U8 *uscan = (U8*)NULL;
- U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
- U32 charcount = 0; /* how many input chars we have matched */
- U32 accepted = 0; /* have we seen any accepting states? */
-
- ST.B = next;
- ST.jump = trie->jump;
- ST.me = scan;
- ST.firstpos = NULL;
- ST.longfold = FALSE; /* char longer if folded => it's harder */
- ST.nextword = 0;
-
- /* fully traverse the TRIE; note the position of the
- shortest accept state and the wordnum of the longest
- accept state */
-
- while ( state && uc <= (U8*)PL_regeol ) {
- U32 base = trie->states[ state ].trans.base;
- UV uvc = 0;
- U16 charid = 0;
- U16 wordnum;
- wordnum = trie->states[ state ].wordnum;
-
- if (wordnum) { /* it's an accept state */
- if (!accepted) {
- accepted = 1;
- /* record first match position */
- if (ST.longfold) {
- ST.firstpos = (U8*)locinput;
- ST.firstchars = 0;
- }
- else {
- ST.firstpos = uc;
- ST.firstchars = charcount;
- }
- }
- if (!ST.nextword || wordnum < ST.nextword)
- ST.nextword = wordnum;
- ST.topword = wordnum;
- }
-
- DEBUG_TRIE_EXECUTE_r({
- DUMP_EXEC_POS( (char *)uc, scan, utf8_target );
- PerlIO_printf( Perl_debug_log,
- "%*s %sState: %4"UVxf" Accepted: %c ",
- 2+depth * 2, "", PL_colors[4],
- (UV)state, (accepted ? 'Y' : 'N'));
- });
-
- /* read a char and goto next state */
- if ( base ) {
- I32 offset;
- REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc,
- uscan, len, uvc, charid, foldlen,
- foldbuf, uniflags);
- charcount++;
- if (foldlen>0)
- ST.longfold = TRUE;
- if (charid &&
- ( ((offset =
- base + charid - 1 - trie->uniquecharcount)) >= 0)
-
- && ((U32)offset < trie->lasttrans)
- && trie->trans[offset].check == state)
- {
- state = trie->trans[offset].next;
- }
- else {
- state = 0;
- }
- uc += len;
-
- }
- else {
- state = 0;
- }
- DEBUG_TRIE_EXECUTE_r(
- PerlIO_printf( Perl_debug_log,
- "Charid:%3x CP:%4"UVxf" After State: %4"UVxf"%s\n",
- charid, uvc, (UV)state, PL_colors[5] );
- );
- }
- if (!accepted)
- sayNO;
-
- /* calculate total number of accept states */
- {
- U16 w = ST.topword;
- accepted = 0;
- while (w) {
- w = trie->wordinfo[w].prev;
- accepted++;
- }
- ST.accepted = accepted;
- }
-
- DEBUG_EXECUTE_r(
- PerlIO_printf( Perl_debug_log,
- "%*s %sgot %"IVdf" possible matches%s\n",
- REPORT_CODE_OFF + depth * 2, "",
- PL_colors[4], (IV)ST.accepted, PL_colors[5] );
- );
- goto trie_first_try; /* jump into the fail handler */
- }}
- /* NOTREACHED */
-
- case TRIE_next_fail: /* we failed - try next alternative */
- if ( ST.jump) {
- REGCP_UNWIND(ST.cp);
- for (n = *PL_reglastparen; n > ST.lastparen; n--)
- PL_regoffs[n].end = -1;
- *PL_reglastparen = n;
- }
- if (!--ST.accepted) {
- DEBUG_EXECUTE_r({
- PerlIO_printf( Perl_debug_log,
- "%*s %sTRIE failed...%s\n",
- REPORT_CODE_OFF+depth*2, "",
- PL_colors[4],
- PL_colors[5] );
- });
- sayNO_SILENT;
- }
- {
- /* Find next-highest word to process. Note that this code
- * is O(N^2) per trie run (O(N) per branch), so keep tight */
- register U16 min = 0;
- register U16 word;
- register U16 const nextword = ST.nextword;
- register reg_trie_wordinfo * const wordinfo
- = ((reg_trie_data*)rexi->data->data[ARG(ST.me)])->wordinfo;
- for (word=ST.topword; word; word=wordinfo[word].prev) {
- if (word > nextword && (!min || word < min))
- min = word;
- }
- ST.nextword = min;
- }
-
- trie_first_try:
- if (do_cutgroup) {
- do_cutgroup = 0;
- no_final = 0;
- }
-
- if ( ST.jump) {
- ST.lastparen = *PL_reglastparen;
- REGCP_SET(ST.cp);
- }
-
- /* find start char of end of current word */
- {
- U32 chars; /* how many chars to skip */
- U8 *uc = ST.firstpos;
- reg_trie_data * const trie
- = (reg_trie_data*)rexi->data->data[ARG(ST.me)];
-
- assert((trie->wordinfo[ST.nextword].len - trie->prefixlen)
- >= ST.firstchars);
- chars = (trie->wordinfo[ST.nextword].len - trie->prefixlen)
- - ST.firstchars;
-
- if (ST.longfold) {
- /* the hard option - fold each char in turn and find
- * its folded length (which may be different */
- U8 foldbuf[UTF8_MAXBYTES_CASE + 1];
- STRLEN foldlen;
- STRLEN len;
- UV uvc;
- U8 *uscan;
-
- while (chars) {
- if (utf8_target) {
- uvc = utf8n_to_uvuni((U8*)uc, UTF8_MAXLEN, &len,
- uniflags);
- uc += len;
- }
- else {
- uvc = *uc;
- uc++;
- }
- uvc = to_uni_fold(uvc, foldbuf, &foldlen);
- uscan = foldbuf;
- while (foldlen) {
- if (!--chars)
- break;
- uvc = utf8n_to_uvuni(uscan, UTF8_MAXLEN, &len,
- uniflags);
- uscan += len;
- foldlen -= len;
- }
- }
- }
- else {
- if (utf8_target)
- while (chars--)
- uc += UTF8SKIP(uc);
- else
- uc += chars;
- }
- PL_reginput = (char *)uc;
- }
-
- scan = (ST.jump && ST.jump[ST.nextword])
- ? ST.me + ST.jump[ST.nextword]
- : ST.B;
-
- DEBUG_EXECUTE_r({
- PerlIO_printf( Perl_debug_log,
- "%*s %sTRIE matched word #%d, continuing%s\n",
- REPORT_CODE_OFF+depth*2, "",
- PL_colors[4],
- ST.nextword,
- PL_colors[5]
- );
- });
-
- if (ST.accepted > 1 || has_cutgroup) {
- PUSH_STATE_GOTO(TRIE_next, scan);
- /* NOTREACHED */
- }
- /* only one choice left - just continue */
- DEBUG_EXECUTE_r({
- AV *const trie_words
- = MUTABLE_AV(rexi->data->data[ARG(ST.me)+TRIE_WORDS_OFFSET]);
- SV ** const tmp = av_fetch( trie_words,
- ST.nextword-1, 0 );
- SV *sv= tmp ? sv_newmortal() : NULL;
-
- PerlIO_printf( Perl_debug_log,
- "%*s %sonly one match left, short-circuiting: #%d <%s>%s\n",
- REPORT_CODE_OFF+depth*2, "", PL_colors[4],
- ST.nextword,
- tmp ? pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 0,
- PL_colors[0], PL_colors[1],
- (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0)
- )
- : "not compiled under -Dr",
- PL_colors[5] );
- });
-
- locinput = PL_reginput;
- nextchr = UCHARAT(locinput);
- continue; /* execute rest of RE */
- /* NOTREACHED */
-#undef ST
-
- case EXACT: {
- char *s = STRING(scan);
- ln = STR_LEN(scan);
- if (utf8_target != UTF_PATTERN) {
- /* The target and the pattern have differing utf8ness. */
- char *l = locinput;
- const char * const e = s + ln;
-
- if (utf8_target) {
- /* The target is utf8, the pattern is not utf8. */
- while (s < e) {
- STRLEN ulen;
- if (l >= PL_regeol)
- sayNO;
- if (NATIVE_TO_UNI(*(U8*)s) !=
- utf8n_to_uvuni((U8*)l, UTF8_MAXBYTES, &ulen,
- uniflags))
- sayNO;
- l += ulen;
- s ++;
- }
- }
- else {
- /* The target is not utf8, the pattern is utf8. */
- while (s < e) {
- STRLEN ulen;
- if (l >= PL_regeol)
- sayNO;
- if (NATIVE_TO_UNI(*((U8*)l)) !=
- utf8n_to_uvuni((U8*)s, UTF8_MAXBYTES, &ulen,
- uniflags))
- sayNO;
- s += ulen;
- l ++;
- }
- }
- locinput = l;
- nextchr = UCHARAT(locinput);
- break;
- }
- /* The target and the pattern have the same utf8ness. */
- /* Inline the first character, for speed. */
- if (UCHARAT(s) != nextchr)
- sayNO;
- if (PL_regeol - locinput < ln)
- sayNO;
- if (ln > 1 && memNE(s, locinput, ln))
- sayNO;
- locinput += ln;
- nextchr = UCHARAT(locinput);
- break;
- }
- case EXACTFL: {
- re_fold_t folder;
- const U8 * fold_array;
- const char * s;
-
- PL_reg_flags |= RF_tainted;
- folder = foldEQ_locale;
- fold_array = PL_fold_locale;
- goto do_exactf;
-
- case EXACTFU:
- folder = foldEQ_latin1;
- fold_array = PL_fold_latin1;
- goto do_exactf;
-
- case EXACTF:
- folder = foldEQ;
- fold_array = PL_fold;
-
- do_exactf:
- s = STRING(scan);
- ln = STR_LEN(scan);
-
- if (utf8_target || UTF_PATTERN) {
- /* Either target or the pattern are utf8. */
- const char * const l = locinput;
- char *e = PL_regeol;
-
- if (! foldEQ_utf8(s, 0, ln, cBOOL(UTF_PATTERN),
- l, &e, 0, utf8_target)) {
- /* One more case for the sharp s:
- * pack("U0U*", 0xDF) =~ /ss/i,
- * the 0xC3 0x9F are the UTF-8
- * byte sequence for the U+00DF. */
-
- if (!(utf8_target &&
- toLOWER(s[0]) == 's' &&
- ln >= 2 &&
- toLOWER(s[1]) == 's' &&
- (U8)l[0] == 0xC3 &&
- e - l >= 2 &&
- (U8)l[1] == 0x9F))
- sayNO;
- }
- locinput = e;
- nextchr = UCHARAT(locinput);
- break;
- }
-
- /* Neither the target and the pattern are utf8. */
-
- /* Inline the first character, for speed. */
- if (UCHARAT(s) != nextchr &&
- UCHARAT(s) != fold_array[nextchr])
- {
- sayNO;
- }
- if (PL_regeol - locinput < ln)
- sayNO;
- if (ln > 1 && ! folder(s, locinput, ln))
- sayNO;
- locinput += ln;
- nextchr = UCHARAT(locinput);
- break;
- }
- case BOUNDL:
- case NBOUNDL:
- PL_reg_flags |= RF_tainted;
- /* FALL THROUGH */
- case BOUND:
- case NBOUND:
- /* was last char in word? */
- if (utf8_target) {
- if (locinput == PL_bostr)
- ln = '\n';
- else {
- const U8 * const r = reghop3((U8*)locinput, -1, (U8*)PL_bostr);
-
- ln = utf8n_to_uvchr(r, UTF8SKIP(r), 0, uniflags);
- }
- if (OP(scan) == BOUND || OP(scan) == NBOUND) {
- ln = isALNUM_uni(ln);
- LOAD_UTF8_CHARCLASS_ALNUM();
- n = swash_fetch(PL_utf8_alnum, (U8*)locinput, utf8_target);
- }
- else {
- ln = isALNUM_LC_uvchr(UNI_TO_NATIVE(ln));
- n = isALNUM_LC_utf8((U8*)locinput);
- }
- }
- else {
- ln = (locinput != PL_bostr) ?
- UCHARAT(locinput - 1) : '\n';
- if (FLAGS(scan) & USE_UNI) {
-
- /* Here, can't be BOUNDL or NBOUNDL because they never set
- * the flags to USE_UNI */
- ln = isWORDCHAR_L1(ln);
- n = isWORDCHAR_L1(nextchr);
- }
- else if (OP(scan) == BOUND || OP(scan) == NBOUND) {
- ln = isALNUM(ln);
- n = isALNUM(nextchr);
- }
- else {
- ln = isALNUM_LC(ln);
- n = isALNUM_LC(nextchr);
- }
- }
- if (((!ln) == (!n)) == (OP(scan) == BOUND ||
- OP(scan) == BOUNDL))
- sayNO;
- break;
- case ANYOF:
- if (utf8_target) {
- STRLEN inclasslen = PL_regeol - locinput;
- if (locinput >= PL_regeol)
- sayNO;
-
- if (!reginclass(rex, scan, (U8*)locinput, &inclasslen, utf8_target))
- goto anyof_fail;
- locinput += inclasslen;
- nextchr = UCHARAT(locinput);
- break;
- }
- else {
- if (nextchr < 0)
- nextchr = UCHARAT(locinput);
- if (!nextchr && locinput >= PL_regeol)
- sayNO;
- if (!REGINCLASS(rex, scan, (U8*)locinput))
- goto anyof_fail;
- nextchr = UCHARAT(++locinput);
- break;
- }
- anyof_fail:
- /* If we might have the case of the German sharp s
- * in a casefolding Unicode character class. */
-
- if (ANYOF_FOLD_SHARP_S(scan, locinput, PL_regeol)) {
- locinput += SHARP_S_SKIP;
- nextchr = UCHARAT(locinput);
- }
- else
- sayNO;
- break;
- /* Special char classes - The defines start on line 129 or so */
- CCC_TRY_AFF_U( ALNUM, ALNUML, perl_word, "a", isALNUM_LC_utf8, isWORDCHAR_L1, isALNUM_LC);
- CCC_TRY_NEG_U(NALNUM, NALNUML, perl_word, "a", isALNUM_LC_utf8, isWORDCHAR_L1, isALNUM_LC);
-
- CCC_TRY_AFF_U( SPACE, SPACEL, perl_space, " ", isSPACE_LC_utf8, isSPACE_L1, isSPACE_LC);
- CCC_TRY_NEG_U(NSPACE, NSPACEL, perl_space, " ", isSPACE_LC_utf8, isSPACE_L1, isSPACE_LC);
-
- CCC_TRY_AFF( DIGIT, DIGITL, posix_digit, "0", isDIGIT_LC_utf8, isDIGIT, isDIGIT_LC);
- CCC_TRY_NEG(NDIGIT, NDIGITL, posix_digit, "0", isDIGIT_LC_utf8, isDIGIT, isDIGIT_LC);
-
- case CLUMP: /* Match \X: logical Unicode character. This is defined as
- a Unicode extended Grapheme Cluster */
- /* From http://www.unicode.org/reports/tr29 (5.2 version). An
- extended Grapheme Cluster is:
-
- CR LF
- | Prepend* Begin Extend*
- | .
-
- Begin is (Hangul-syllable | ! Control)
- Extend is (Grapheme_Extend | Spacing_Mark)
- Control is [ GCB_Control CR LF ]
-
- The discussion below shows how the code for CLUMP is derived
- from this regex. Note that most of these concepts are from
- property values of the Grapheme Cluster Boundary (GCB) property.
- No code point can have multiple property values for a given
- property. Thus a code point in Prepend can't be in Control, but
- it must be in !Control. This is why Control above includes
- GCB_Control plus CR plus LF. The latter two are used in the GCB
- property separately, and so can't be in GCB_Control, even though
- they logically are controls. Control is not the same as gc=cc,
- but includes format and other characters as well.
-
- The Unicode definition of Hangul-syllable is:
- L+
- | (L* ( ( V | LV ) V* | LVT ) T*)
- | T+
- )
- Each of these is a value for the GCB property, and hence must be
- disjoint, so the order they are tested is immaterial, so the
- above can safely be changed to
- T+
- | L+
- | (L* ( LVT | ( V | LV ) V*) T*)
-
- The last two terms can be combined like this:
- L* ( L
- | (( LVT | ( V | LV ) V*) T*))
-
- And refactored into this:
- L* (L | LVT T* | V V* T* | LV V* T*)
-
- That means that if we have seen any L's at all we can quit
- there, but if the next character is a LVT, a V or and LV we
- should keep going.
-
- There is a subtlety with Prepend* which showed up in testing.
- Note that the Begin, and only the Begin is required in:
- | Prepend* Begin Extend*
- Also, Begin contains '! Control'. A Prepend must be a '!
- Control', which means it must be a Begin. What it comes down to
- is that if we match Prepend* and then find no suitable Begin
- afterwards, that if we backtrack the last Prepend, that one will
- be a suitable Begin.
- */
-
- if (locinput >= PL_regeol)
- sayNO;
- if (! utf8_target) {
-
- /* Match either CR LF or '.', as all the other possibilities
- * require utf8 */
- locinput++; /* Match the . or CR */
- if (nextchr == '\r'
- && locinput < PL_regeol
- && UCHARAT(locinput) == '\n') locinput++;
- }
- else {
-
- /* Utf8: See if is ( CR LF ); already know that locinput <
- * PL_regeol, so locinput+1 is in bounds */
- if (nextchr == '\r' && UCHARAT(locinput + 1) == '\n') {
- locinput += 2;
- }
- else {
- /* In case have to backtrack to beginning, then match '.' */
- char *starting = locinput;
-
- /* In case have to backtrack the last prepend */
- char *previous_prepend = 0;
-
- LOAD_UTF8_CHARCLASS_GCB();
-
- /* Match (prepend)* */
- while (locinput < PL_regeol
- && swash_fetch(PL_utf8_X_prepend,
- (U8*)locinput, utf8_target))
- {
- previous_prepend = locinput;
- locinput += UTF8SKIP(locinput);
- }
-
- /* As noted above, if we matched a prepend character, but
- * the next thing won't match, back off the last prepend we
- * matched, as it is guaranteed to match the begin */
- if (previous_prepend
- && (locinput >= PL_regeol
- || ! swash_fetch(PL_utf8_X_begin,
- (U8*)locinput, utf8_target)))
- {
- locinput = previous_prepend;
- }
-
- /* Note that here we know PL_regeol > locinput, as we
- * tested that upon input to this switch case, and if we
- * moved locinput forward, we tested the result just above
- * and it either passed, or we backed off so that it will
- * now pass */
- if (! swash_fetch(PL_utf8_X_begin, (U8*)locinput, utf8_target)) {
-
- /* Here did not match the required 'Begin' in the
- * second term. So just match the very first
- * character, the '.' of the final term of the regex */
- locinput = starting + UTF8SKIP(starting);
- } else {
-
- /* Here is the beginning of a character that can have
- * an extender. It is either a hangul syllable, or a
- * non-control */
- if (swash_fetch(PL_utf8_X_non_hangul,
- (U8*)locinput, utf8_target))
- {
-
- /* Here not a Hangul syllable, must be a
- * ('! * Control') */
- locinput += UTF8SKIP(locinput);
- } else {
-
- /* Here is a Hangul syllable. It can be composed
- * of several individual characters. One
- * possibility is T+ */
- if (swash_fetch(PL_utf8_X_T,
- (U8*)locinput, utf8_target))
- {
- while (locinput < PL_regeol
- && swash_fetch(PL_utf8_X_T,
- (U8*)locinput, utf8_target))
- {
- locinput += UTF8SKIP(locinput);
- }
- } else {
-
- /* Here, not T+, but is a Hangul. That means
- * it is one of the others: L, LV, LVT or V,
- * and matches:
- * L* (L | LVT T* | V V* T* | LV V* T*) */
-
- /* Match L* */
- while (locinput < PL_regeol
- && swash_fetch(PL_utf8_X_L,
- (U8*)locinput, utf8_target))
- {
- locinput += UTF8SKIP(locinput);
- }
-
- /* Here, have exhausted L*. If the next
- * character is not an LV, LVT nor V, it means
- * we had to have at least one L, so matches L+
- * in the original equation, we have a complete
- * hangul syllable. Are done. */
-
- if (locinput < PL_regeol
- && swash_fetch(PL_utf8_X_LV_LVT_V,
- (U8*)locinput, utf8_target))
- {
-
- /* Otherwise keep going. Must be LV, LVT
- * or V. See if LVT */
- if (swash_fetch(PL_utf8_X_LVT,
- (U8*)locinput, utf8_target))
- {
- locinput += UTF8SKIP(locinput);
- } else {
-
- /* Must be V or LV. Take it, then
- * match V* */
- locinput += UTF8SKIP(locinput);
- while (locinput < PL_regeol
- && swash_fetch(PL_utf8_X_V,
- (U8*)locinput, utf8_target))
- {
- locinput += UTF8SKIP(locinput);
- }
- }
-
- /* And any of LV, LVT, or V can be followed
- * by T* */
- while (locinput < PL_regeol
- && swash_fetch(PL_utf8_X_T,
- (U8*)locinput,
- utf8_target))
- {
- locinput += UTF8SKIP(locinput);
- }
- }
- }
- }
-
- /* Match any extender */
- while (locinput < PL_regeol
- && swash_fetch(PL_utf8_X_extend,
- (U8*)locinput, utf8_target))
- {
- locinput += UTF8SKIP(locinput);
- }
- }
- }
- if (locinput > PL_regeol) sayNO;
- }
- nextchr = UCHARAT(locinput);
- break;
-
- case NREFFL:
- { /* The capture buffer cases. The ones beginning with N for the
- named buffers just convert to the equivalent numbered and
- pretend they were called as the corresponding numbered buffer
- op. */
- /* don't initialize these, it makes C++ unhappy */
- char *s;
- char type;
- re_fold_t folder;
- const U8 *fold_array;
-
- folder = NULL; /* NULL assumes will be NREF, REF: no
- folding */
- fold_array = NULL;
-
- PL_reg_flags |= RF_tainted;
- folder = foldEQ_locale;
- fold_array = PL_fold_locale;
- type = REFFL;
- goto do_nref;
-
- case NREFFU:
- folder = foldEQ_latin1;
- fold_array = PL_fold_latin1;
- type = REFFU;
- goto do_nref;
-
- case NREFF:
- folder = foldEQ;
- fold_array = PL_fold;
- type = REFF;
- goto do_nref;
-
- case NREF:
- type = REF;
- folder = NULL;
- fold_array = NULL;
- do_nref:
-
- /* For the named back references, find the corresponding buffer
- * number */
- n = reg_check_named_buff_matched(rex,scan);
-
- if ( ! n ) {
- sayNO;
- }
- goto do_nref_ref_common;
-
- case REFFL:
- PL_reg_flags |= RF_tainted;
- folder = foldEQ_locale;
- fold_array = PL_fold_locale;
- goto do_ref;
-
- case REFFU:
- folder = foldEQ_latin1;
- fold_array = PL_fold_latin1;
- goto do_ref;
-
- case REFF:
- folder = foldEQ;
- fold_array = PL_fold;
- goto do_ref;
-
- case REF:
- folder = NULL;
- fold_array = NULL;
-
- do_ref:
- type = OP(scan);
- n = ARG(scan); /* which paren pair */
-
- do_nref_ref_common:
- ln = PL_regoffs[n].start;
- PL_reg_leftiter = PL_reg_maxiter; /* Void cache */
- if (*PL_reglastparen < n || ln == -1)
- sayNO; /* Do not match unless seen CLOSEn. */
- if (ln == PL_regoffs[n].end)
- break;
-
- s = PL_bostr + ln;
- if (type != REF /* REF can do byte comparison */
- && (utf8_target
- || (type == REFFU
- && (*s == (char) LATIN_SMALL_LETTER_SHARP_S
- || *locinput == (char) LATIN_SMALL_LETTER_SHARP_S))))
- { /* XXX handle REFFL better */
- char * limit = PL_regeol;
-
- /* This call case insensitively compares the entire buffer
- * at s, with the current input starting at locinput, but
- * not going off the end given by PL_regeol, and returns in
- * limit upon success, how much of the current input was
- * matched */
- if (! foldEQ_utf8(s, NULL, PL_regoffs[n].end - ln, utf8_target,
- locinput, &limit, 0, utf8_target))
- {
- sayNO;
- }
- locinput = limit;
- nextchr = UCHARAT(locinput);
- break;
- }
-
- /* Not utf8: Inline the first character, for speed. */
- if (UCHARAT(s) != nextchr &&
- (type == REF ||
- UCHARAT(s) != fold_array[nextchr]))
- sayNO;
- ln = PL_regoffs[n].end - ln;
- if (locinput + ln > PL_regeol)
- sayNO;
- if (ln > 1 && (type == REF
- ? memNE(s, locinput, ln)
- : ! folder(s, locinput, ln)))
- sayNO;
- locinput += ln;
- nextchr = UCHARAT(locinput);
- break;
- }
- case NOTHING:
- case TAIL:
- break;
- case BACK:
- break;
-
-#undef ST
-#define ST st->u.eval
- {
- SV *ret;
- REGEXP *re_sv;
- regexp *re;
- regexp_internal *rei;
- regnode *startpoint;
-
- case GOSTART:
- case GOSUB: /* /(...(?1))/ /(...(?&foo))/ */
- if (cur_eval && cur_eval->locinput==locinput) {
- if (cur_eval->u.eval.close_paren == (U32)ARG(scan))
- Perl_croak(aTHX_ "Infinite recursion in regex");
- if ( ++nochange_depth > max_nochange_depth )
- Perl_croak(aTHX_
- "Pattern subroutine nesting without pos change"
- " exceeded limit in regex");
- } else {
- nochange_depth = 0;
- }
- re_sv = rex_sv;
- re = rex;
- rei = rexi;
- (void)ReREFCNT_inc(rex_sv);
- if (OP(scan)==GOSUB) {
- startpoint = scan + ARG2L(scan);
- ST.close_paren = ARG(scan);
- } else {
- startpoint = rei->program+1;
- ST.close_paren = 0;
- }
- goto eval_recurse_doit;
- /* NOTREACHED */
- case EVAL: /* /(?{A})B/ /(??{A})B/ and /(?(?{A})X|Y)B/ */
- if (cur_eval && cur_eval->locinput==locinput) {
- if ( ++nochange_depth > max_nochange_depth )
- Perl_croak(aTHX_ "EVAL without pos change exceeded limit in regex");
- } else {
- nochange_depth = 0;
- }
- {
- /* execute the code in the {...} */
- dSP;
- SV ** const before = SP;
- OP_4tree * const oop = PL_op;
- COP * const ocurcop = PL_curcop;
- PAD *old_comppad;
- char *saved_regeol = PL_regeol;
- struct re_save_state saved_state;
-
- /* To not corrupt the existing regex state while executing the
- * eval we would normally put it on the save stack, like with
- * save_re_context. However, re-evals have a weird scoping so we
- * can't just add ENTER/LEAVE here. With that, things like
- *
- * (?{$a=2})(a(?{local$a=$a+1}))*aak*c(?{$b=$a})
- *
- * would break, as they expect the localisation to be unwound
- * only when the re-engine backtracks through the bit that
- * localised it.
- *
- * What we do instead is just saving the state in a local c
- * variable.
- */
- Copy(&PL_reg_state, &saved_state, 1, struct re_save_state);
-
- n = ARG(scan);
- PL_op = (OP_4tree*)rexi->data->data[n];
- DEBUG_STATE_r( PerlIO_printf(Perl_debug_log,
- " re_eval 0x%"UVxf"\n", PTR2UV(PL_op)) );
- PAD_SAVE_LOCAL(old_comppad, (PAD*)rexi->data->data[n + 2]);
- PL_regoffs[0].end = PL_reg_magic->mg_len = locinput - PL_bostr;
-
- if (sv_yes_mark) {
- SV *sv_mrk = get_sv("REGMARK", 1);
- sv_setsv(sv_mrk, sv_yes_mark);
- }
-
- CALLRUNOPS(aTHX); /* Scalar context. */
- SPAGAIN;
- if (SP == before)
- ret = &PL_sv_undef; /* protect against empty (?{}) blocks. */
- else {
- ret = POPs;
- PUTBACK;
- }
-
- Copy(&saved_state, &PL_reg_state, 1, struct re_save_state);
-
- PL_op = oop;
- PAD_RESTORE_LOCAL(old_comppad);
- PL_curcop = ocurcop;
- PL_regeol = saved_regeol;
- if (!logical) {
- /* /(?{...})/ */
- sv_setsv(save_scalar(PL_replgv), ret);
- break;
- }
- }
- if (logical == 2) { /* Postponed subexpression: /(??{...})/ */
- logical = 0;
- {
- /* extract RE object from returned value; compiling if
- * necessary */
- MAGIC *mg = NULL;
- REGEXP *rx = NULL;
-
- if (SvROK(ret)) {
- SV *const sv = SvRV(ret);
-
- if (SvTYPE(sv) == SVt_REGEXP) {
- rx = (REGEXP*) sv;
- } else if (SvSMAGICAL(sv)) {
- mg = mg_find(sv, PERL_MAGIC_qr);
- assert(mg);
- }
- } else if (SvTYPE(ret) == SVt_REGEXP) {
- rx = (REGEXP*) ret;
- } else if (SvSMAGICAL(ret)) {
- if (SvGMAGICAL(ret)) {
- /* I don't believe that there is ever qr magic
- here. */
- assert(!mg_find(ret, PERL_MAGIC_qr));
- sv_unmagic(ret, PERL_MAGIC_qr);
- }
- else {
- mg = mg_find(ret, PERL_MAGIC_qr);
- /* testing suggests mg only ends up non-NULL for
- scalars who were upgraded and compiled in the
- else block below. In turn, this is only
- triggered in the "postponed utf8 string" tests
- in t/op/pat.t */
- }
- }
-
- if (mg) {
- rx = (REGEXP *) mg->mg_obj; /*XXX:dmq*/
- assert(rx);
- }
- if (rx) {
- rx = reg_temp_copy(NULL, rx);
- }
- else {
- U32 pm_flags = 0;
- const I32 osize = PL_regsize;
-
- if (DO_UTF8(ret)) {
- assert (SvUTF8(ret));
- } else if (SvUTF8(ret)) {
- /* Not doing UTF-8, despite what the SV says. Is
- this only if we're trapped in use 'bytes'? */
- /* Make a copy of the octet sequence, but without
- the flag on, as the compiler now honours the
- SvUTF8 flag on ret. */
- STRLEN len;
- const char *const p = SvPV(ret, len);
- ret = newSVpvn_flags(p, len, SVs_TEMP);
- }
- rx = CALLREGCOMP(ret, pm_flags);
- if (!(SvFLAGS(ret)
- & (SVs_TEMP | SVs_PADTMP | SVf_READONLY
- | SVs_GMG))) {
- /* This isn't a first class regexp. Instead, it's
- caching a regexp onto an existing, Perl visible
- scalar. */
- sv_magic(ret, MUTABLE_SV(rx), PERL_MAGIC_qr, 0, 0);
- }
- PL_regsize = osize;
- }
- re_sv = rx;
- re = (struct regexp *)SvANY(rx);
- }
- RXp_MATCH_COPIED_off(re);
- re->subbeg = rex->subbeg;
- re->sublen = rex->sublen;
- rei = RXi_GET(re);
- DEBUG_EXECUTE_r(
- debug_start_match(re_sv, utf8_target, locinput, PL_regeol,
- "Matching embedded");
- );
- startpoint = rei->program + 1;
- ST.close_paren = 0; /* only used for GOSUB */
- /* borrowed from regtry */
- if (PL_reg_start_tmpl <= re->nparens) {
- PL_reg_start_tmpl = re->nparens*3/2 + 3;
- if(PL_reg_start_tmp)
- Renew(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
- else
- Newx(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
- }
-
- eval_recurse_doit: /* Share code with GOSUB below this line */
- /* run the pattern returned from (??{...}) */
- ST.cp = regcppush(0); /* Save *all* the positions. */
- REGCP_SET(ST.lastcp);
-
- PL_regoffs = re->offs; /* essentially NOOP on GOSUB */
-
- /* see regtry, specifically PL_reglast(?:close)?paren is a pointer! (i dont know why) :dmq */
- PL_reglastparen = &re->lastparen;
- PL_reglastcloseparen = &re->lastcloseparen;
- re->lastparen = 0;
- re->lastcloseparen = 0;
-
- PL_reginput = locinput;
- PL_regsize = 0;
-
- /* XXXX This is too dramatic a measure... */
- PL_reg_maxiter = 0;
-
- ST.toggle_reg_flags = PL_reg_flags;
- if (RX_UTF8(re_sv))
- PL_reg_flags |= RF_utf8;
- else
- PL_reg_flags &= ~RF_utf8;
- ST.toggle_reg_flags ^= PL_reg_flags; /* diff of old and new */
-
- ST.prev_rex = rex_sv;
- ST.prev_curlyx = cur_curlyx;
- SETREX(rex_sv,re_sv);
- rex = re;
- rexi = rei;
- cur_curlyx = NULL;
- ST.B = next;
- ST.prev_eval = cur_eval;
- cur_eval = st;
- /* now continue from first node in postoned RE */
- PUSH_YES_STATE_GOTO(EVAL_AB, startpoint);
- /* NOTREACHED */
- }
- /* logical is 1, /(?(?{...})X|Y)/ */
- sw = cBOOL(SvTRUE(ret));
- logical = 0;
- break;
- }
-
- case EVAL_AB: /* cleanup after a successful (??{A})B */
- /* note: this is called twice; first after popping B, then A */
- PL_reg_flags ^= ST.toggle_reg_flags;
- ReREFCNT_dec(rex_sv);
- SETREX(rex_sv,ST.prev_rex);
- rex = (struct regexp *)SvANY(rex_sv);
- rexi = RXi_GET(rex);
- regcpblow(ST.cp);
- cur_eval = ST.prev_eval;
- cur_curlyx = ST.prev_curlyx;
-
- /* rex was changed so update the pointer in PL_reglastparen and PL_reglastcloseparen */
- PL_reglastparen = &rex->lastparen;
- PL_reglastcloseparen = &rex->lastcloseparen;
- /* also update PL_regoffs */
- PL_regoffs = rex->offs;
-
- /* XXXX This is too dramatic a measure... */
- PL_reg_maxiter = 0;
- if ( nochange_depth )
- nochange_depth--;
- sayYES;
-
-
- case EVAL_AB_fail: /* unsuccessfully ran A or B in (??{A})B */
- /* note: this is called twice; first after popping B, then A */
- PL_reg_flags ^= ST.toggle_reg_flags;
- ReREFCNT_dec(rex_sv);
- SETREX(rex_sv,ST.prev_rex);
- rex = (struct regexp *)SvANY(rex_sv);
- rexi = RXi_GET(rex);
- /* rex was changed so update the pointer in PL_reglastparen and PL_reglastcloseparen */
- PL_reglastparen = &rex->lastparen;
- PL_reglastcloseparen = &rex->lastcloseparen;
-
- PL_reginput = locinput;
- REGCP_UNWIND(ST.lastcp);
- regcppop(rex);
- cur_eval = ST.prev_eval;
- cur_curlyx = ST.prev_curlyx;
- /* XXXX This is too dramatic a measure... */
- PL_reg_maxiter = 0;
- if ( nochange_depth )
- nochange_depth--;
- sayNO_SILENT;
-#undef ST
-
- case OPEN:
- n = ARG(scan); /* which paren pair */
- PL_reg_start_tmp[n] = locinput;
- if (n > PL_regsize)
- PL_regsize = n;
- lastopen = n;
- break;
- case CLOSE:
- n = ARG(scan); /* which paren pair */
- PL_regoffs[n].start = PL_reg_start_tmp[n] - PL_bostr;
- PL_regoffs[n].end = locinput - PL_bostr;
- /*if (n > PL_regsize)
- PL_regsize = n;*/
- if (n > *PL_reglastparen)
- *PL_reglastparen = n;
- *PL_reglastcloseparen = n;
- if (cur_eval && cur_eval->u.eval.close_paren == n) {
- goto fake_end;
- }
- break;
- case ACCEPT:
- if (ARG(scan)){
- regnode *cursor;
- for (cursor=scan;
- cursor && OP(cursor)!=END;
- cursor=regnext(cursor))
- {
- if ( OP(cursor)==CLOSE ){
- n = ARG(cursor);
- if ( n <= lastopen ) {
- PL_regoffs[n].start
- = PL_reg_start_tmp[n] - PL_bostr;
- PL_regoffs[n].end = locinput - PL_bostr;
- /*if (n > PL_regsize)
- PL_regsize = n;*/
- if (n > *PL_reglastparen)
- *PL_reglastparen = n;
- *PL_reglastcloseparen = n;
- if ( n == ARG(scan) || (cur_eval &&
- cur_eval->u.eval.close_paren == n))
- break;
- }
- }
- }
- }
- goto fake_end;
- /*NOTREACHED*/
- case GROUPP:
- n = ARG(scan); /* which paren pair */
- sw = cBOOL(*PL_reglastparen >= n && PL_regoffs[n].end != -1);
- break;
- case NGROUPP:
- /* reg_check_named_buff_matched returns 0 for no match */
- sw = cBOOL(0 < reg_check_named_buff_matched(rex,scan));
- break;
- case INSUBP:
- n = ARG(scan);
- sw = (cur_eval && (!n || cur_eval->u.eval.close_paren == n));
- break;
- case DEFINEP:
- sw = 0;
- break;
- case IFTHEN:
- PL_reg_leftiter = PL_reg_maxiter; /* Void cache */
- if (sw)
- next = NEXTOPER(NEXTOPER(scan));
- else {
- next = scan + ARG(scan);
- if (OP(next) == IFTHEN) /* Fake one. */
- next = NEXTOPER(NEXTOPER(next));
- }
- break;
- case LOGICAL:
- logical = scan->flags;
- break;
-
-/*******************************************************************
-
-The CURLYX/WHILEM pair of ops handle the most generic case of the /A*B/
-pattern, where A and B are subpatterns. (For simple A, CURLYM or
-STAR/PLUS/CURLY/CURLYN are used instead.)
-
-A*B is compiled as <CURLYX><A><WHILEM><B>
-
-On entry to the subpattern, CURLYX is called. This pushes a CURLYX
-state, which contains the current count, initialised to -1. It also sets
-cur_curlyx to point to this state, with any previous value saved in the
-state block.
-
-CURLYX then jumps straight to the WHILEM op, rather than executing A,
-since the pattern may possibly match zero times (i.e. it's a while {} loop
-rather than a do {} while loop).
-
-Each entry to WHILEM represents a successful match of A. The count in the
-CURLYX block is incremented, another WHILEM state is pushed, and execution
-passes to A or B depending on greediness and the current count.
-
-For example, if matching against the string a1a2a3b (where the aN are
-substrings that match /A/), then the match progresses as follows: (the
-pushed states are interspersed with the bits of strings matched so far):
-
- <CURLYX cnt=-1>
- <CURLYX cnt=0><WHILEM>
- <CURLYX cnt=1><WHILEM> a1 <WHILEM>
- <CURLYX cnt=2><WHILEM> a1 <WHILEM> a2 <WHILEM>
- <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM>
- <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM> b
-
-(Contrast this with something like CURLYM, which maintains only a single
-backtrack state:
-
- <CURLYM cnt=0> a1
- a1 <CURLYM cnt=1> a2
- a1 a2 <CURLYM cnt=2> a3
- a1 a2 a3 <CURLYM cnt=3> b
-)
-
-Each WHILEM state block marks a point to backtrack to upon partial failure
-of A or B, and also contains some minor state data related to that
-iteration. The CURLYX block, pointed to by cur_curlyx, contains the
-overall state, such as the count, and pointers to the A and B ops.
-
-This is complicated slightly by nested CURLYX/WHILEM's. Since cur_curlyx
-must always point to the *current* CURLYX block, the rules are:
-
-When executing CURLYX, save the old cur_curlyx in the CURLYX state block,
-and set cur_curlyx to point the new block.
-
-When popping the CURLYX block after a successful or unsuccessful match,
-restore the previous cur_curlyx.
-
-When WHILEM is about to execute B, save the current cur_curlyx, and set it
-to the outer one saved in the CURLYX block.
-
-When popping the WHILEM block after a successful or unsuccessful B match,
-restore the previous cur_curlyx.
-
-Here's an example for the pattern (AI* BI)*BO
-I and O refer to inner and outer, C and W refer to CURLYX and WHILEM:
-
-cur_
-curlyx backtrack stack
------- ---------------
-NULL
-CO <CO prev=NULL> <WO>
-CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
-CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
-NULL <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi <WO prev=CO> bo
-
-At this point the pattern succeeds, and we work back down the stack to
-clean up, restoring as we go:
-
-CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
-CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
-CO <CO prev=NULL> <WO>
-NULL
-
-*******************************************************************/
-
-#define ST st->u.curlyx
-
- case CURLYX: /* start of /A*B/ (for complex A) */
- {
- /* No need to save/restore up to this paren */
- I32 parenfloor = scan->flags;
-
- assert(next); /* keep Coverity happy */
- if (OP(PREVOPER(next)) == NOTHING) /* LONGJMP */
- next += ARG(next);
-
- /* XXXX Probably it is better to teach regpush to support
- parenfloor > PL_regsize... */
- if (parenfloor > (I32)*PL_reglastparen)
- parenfloor = *PL_reglastparen; /* Pessimization... */
-
- ST.prev_curlyx= cur_curlyx;
- cur_curlyx = st;
- ST.cp = PL_savestack_ix;
-
- /* these fields contain the state of the current curly.
- * they are accessed by subsequent WHILEMs */
- ST.parenfloor = parenfloor;
- ST.me = scan;
- ST.B = next;
- ST.minmod = minmod;
- minmod = 0;
- ST.count = -1; /* this will be updated by WHILEM */
- ST.lastloc = NULL; /* this will be updated by WHILEM */
-
- PL_reginput = locinput;
- PUSH_YES_STATE_GOTO(CURLYX_end, PREVOPER(next));
- /* NOTREACHED */
- }
-
- case CURLYX_end: /* just finished matching all of A*B */
- cur_curlyx = ST.prev_curlyx;
- sayYES;
- /* NOTREACHED */
-
- case CURLYX_end_fail: /* just failed to match all of A*B */
- regcpblow(ST.cp);
- cur_curlyx = ST.prev_curlyx;
- sayNO;
- /* NOTREACHED */
-
-
-#undef ST
-#define ST st->u.whilem
-
- case WHILEM: /* just matched an A in /A*B/ (for complex A) */
- {
- /* see the discussion above about CURLYX/WHILEM */
- I32 n;
- int min = ARG1(cur_curlyx->u.curlyx.me);
- int max = ARG2(cur_curlyx->u.curlyx.me);
- regnode *A = NEXTOPER(cur_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS;
-
- assert(cur_curlyx); /* keep Coverity happy */
- n = ++cur_curlyx->u.curlyx.count; /* how many A's matched */
- ST.save_lastloc = cur_curlyx->u.curlyx.lastloc;
- ST.cache_offset = 0;
- ST.cache_mask = 0;
-
- PL_reginput = locinput;
-
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "%*s whilem: matched %ld out of %d..%d\n",
- REPORT_CODE_OFF+depth*2, "", (long)n, min, max)
- );
-
- /* First just match a string of min A's. */
-
- if (n < min) {
- cur_curlyx->u.curlyx.lastloc = locinput;
- PUSH_STATE_GOTO(WHILEM_A_pre, A);
- /* NOTREACHED */
- }
-
- /* If degenerate A matches "", assume A done. */
-
- if (locinput == cur_curlyx->u.curlyx.lastloc) {
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "%*s whilem: empty match detected, trying continuation...\n",
- REPORT_CODE_OFF+depth*2, "")
- );
- goto do_whilem_B_max;
- }
-
- /* super-linear cache processing */
-
- if (scan->flags) {
-
- if (!PL_reg_maxiter) {
- /* start the countdown: Postpone detection until we
- * know the match is not *that* much linear. */
- PL_reg_maxiter = (PL_regeol - PL_bostr + 1) * (scan->flags>>4);
- /* possible overflow for long strings and many CURLYX's */
- if (PL_reg_maxiter < 0)
- PL_reg_maxiter = I32_MAX;
- PL_reg_leftiter = PL_reg_maxiter;
- }
-
- if (PL_reg_leftiter-- == 0) {
- /* initialise cache */
- const I32 size = (PL_reg_maxiter + 7)/8;
- if (PL_reg_poscache) {
- if ((I32)PL_reg_poscache_size < size) {
- Renew(PL_reg_poscache, size, char);
- PL_reg_poscache_size = size;
- }
- Zero(PL_reg_poscache, size, char);
- }
- else {
- PL_reg_poscache_size = size;
- Newxz(PL_reg_poscache, size, char);
- }
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "%swhilem: Detected a super-linear match, switching on caching%s...\n",
- PL_colors[4], PL_colors[5])
- );
- }
-
- if (PL_reg_leftiter < 0) {
- /* have we already failed at this position? */
- I32 offset, mask;
- offset = (scan->flags & 0xf) - 1
- + (locinput - PL_bostr) * (scan->flags>>4);
- mask = 1 << (offset % 8);
- offset /= 8;
- if (PL_reg_poscache[offset] & mask) {
- DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
- "%*s whilem: (cache) already tried at this position...\n",
- REPORT_CODE_OFF+depth*2, "")
- );
- sayNO; /* cache records failure */
- }
- ST.cache_offset = offset;
- ST.cache_mask = mask;
- }
- }
-
- /* Prefer B over A for minimal matching. */
-
- if (cur_curlyx->u.curlyx.minmod) {
- ST.save_curlyx = cur_curlyx;
- cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
- ST.cp = regcppush(ST.save_curlyx->u.curlyx.parenfloor);
- REGCP_SET(ST.lastcp);
- PUSH_YES_STATE_GOTO(WHILEM_B_min, ST.save_curlyx->u.curlyx.B);
- /* NOTREACHED */
- }
-
- /* Prefer A over B for maximal matching. */
-
- if (n < max) { /* More greed allowed? */
- ST.cp = regcppush(cur_curlyx->u.curlyx.parenfloor);
- cur_curlyx->u.curlyx.lastloc = locinput;
- REGCP_SET(ST.lastcp);
- PUSH_STATE_GOTO(WHILEM_A_max, A);
- /* NOTREACHED */
- }
- goto do_whilem_B_max;
- }
- /* NOTREACHED */
-
- case WHILEM_B_min: /* just matched B in a minimal match */
- case WHILEM_B_max: /* just matched B in a maximal match */
- cur_curlyx = ST.save_curlyx;
- sayYES;
- /* NOTREACHED */
-
- case WHILEM_B_max_fail: /* just failed to match B in a maximal match */
- cur_curlyx = ST.save_curlyx;
- cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
- cur_curlyx->u.curlyx.count--;
- CACHEsayNO;
- /* NOTREACHED */
-
- case WHILEM_A_min_fail: /* just failed to match A in a minimal match */
- REGCP_UNWIND(ST.lastcp);
- regcppop(rex);
- /* FALL THROUGH */
- case WHILEM_A_pre_fail: /* just failed to match even minimal A */
- cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
- cur_curlyx->u.curlyx.count--;
- CACHEsayNO;
- /* NOTREACHED */
-
- case WHILEM_A_max_fail: /* just failed to match A in a maximal match */
- REGCP_UNWIND(ST.lastcp);
- regcppop(rex); /* Restore some previous $<digit>s? */
- PL_reginput = locinput;
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "%*s whilem: failed, trying continuation...\n",
- REPORT_CODE_OFF+depth*2, "")
- );
- do_whilem_B_max:
- if (cur_curlyx->u.curlyx.count >= REG_INFTY
- && ckWARN(WARN_REGEXP)
- && !(PL_reg_flags & RF_warned))
- {
- PL_reg_flags |= RF_warned;
- Perl_warner(aTHX_ packWARN(WARN_REGEXP), "%s limit (%d) exceeded",
- "Complex regular subexpression recursion",
- REG_INFTY - 1);
- }
-
- /* now try B */
- ST.save_curlyx = cur_curlyx;
- cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
- PUSH_YES_STATE_GOTO(WHILEM_B_max, ST.save_curlyx->u.curlyx.B);
- /* NOTREACHED */
-
- case WHILEM_B_min_fail: /* just failed to match B in a minimal match */
- cur_curlyx = ST.save_curlyx;
- REGCP_UNWIND(ST.lastcp);
- regcppop(rex);
-
- if (cur_curlyx->u.curlyx.count >= /*max*/ARG2(cur_curlyx->u.curlyx.me)) {
- /* Maximum greed exceeded */
- if (cur_curlyx->u.curlyx.count >= REG_INFTY
- && ckWARN(WARN_REGEXP)
- && !(PL_reg_flags & RF_warned))
- {
- PL_reg_flags |= RF_warned;
- Perl_warner(aTHX_ packWARN(WARN_REGEXP),
- "%s limit (%d) exceeded",
- "Complex regular subexpression recursion",
- REG_INFTY - 1);
- }
- cur_curlyx->u.curlyx.count--;
- CACHEsayNO;
- }
-
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "%*s trying longer...\n", REPORT_CODE_OFF+depth*2, "")
- );
- /* Try grabbing another A and see if it helps. */
- PL_reginput = locinput;
- cur_curlyx->u.curlyx.lastloc = locinput;
- ST.cp = regcppush(cur_curlyx->u.curlyx.parenfloor);
- REGCP_SET(ST.lastcp);
- PUSH_STATE_GOTO(WHILEM_A_min,
- /*A*/ NEXTOPER(ST.save_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS);
- /* NOTREACHED */
-
-#undef ST
-#define ST st->u.branch
-
- case BRANCHJ: /* /(...|A|...)/ with long next pointer */
- next = scan + ARG(scan);
- if (next == scan)
- next = NULL;
- scan = NEXTOPER(scan);
- /* FALL THROUGH */
-
- case BRANCH: /* /(...|A|...)/ */
- scan = NEXTOPER(scan); /* scan now points to inner node */
- ST.lastparen = *PL_reglastparen;
- ST.next_branch = next;
- REGCP_SET(ST.cp);
- PL_reginput = locinput;
-
- /* Now go into the branch */
- if (has_cutgroup) {
- PUSH_YES_STATE_GOTO(BRANCH_next, scan);
- } else {
- PUSH_STATE_GOTO(BRANCH_next, scan);
- }
- /* NOTREACHED */
- case CUTGROUP:
- PL_reginput = locinput;
- sv_yes_mark = st->u.mark.mark_name = scan->flags ? NULL :
- MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
- PUSH_STATE_GOTO(CUTGROUP_next,next);
- /* NOTREACHED */
- case CUTGROUP_next_fail:
- do_cutgroup = 1;
- no_final = 1;
- if (st->u.mark.mark_name)
- sv_commit = st->u.mark.mark_name;
- sayNO;
- /* NOTREACHED */
- case BRANCH_next:
- sayYES;
- /* NOTREACHED */
- case BRANCH_next_fail: /* that branch failed; try the next, if any */
- if (do_cutgroup) {
- do_cutgroup = 0;
- no_final = 0;
- }
- REGCP_UNWIND(ST.cp);
- for (n = *PL_reglastparen; n > ST.lastparen; n--)
- PL_regoffs[n].end = -1;
- *PL_reglastparen = n;
- /*dmq: *PL_reglastcloseparen = n; */
- scan = ST.next_branch;
- /* no more branches? */
- if (!scan || (OP(scan) != BRANCH && OP(scan) != BRANCHJ)) {
- DEBUG_EXECUTE_r({
- PerlIO_printf( Perl_debug_log,
- "%*s %sBRANCH failed...%s\n",
- REPORT_CODE_OFF+depth*2, "",
- PL_colors[4],
- PL_colors[5] );
- });
- sayNO_SILENT;
- }
- continue; /* execute next BRANCH[J] op */
- /* NOTREACHED */
-
- case MINMOD:
- minmod = 1;
- break;
-
-#undef ST
-#define ST st->u.curlym
-
- case CURLYM: /* /A{m,n}B/ where A is fixed-length */
-
- /* This is an optimisation of CURLYX that enables us to push
- * only a single backtracking state, no matter how many matches
- * there are in {m,n}. It relies on the pattern being constant
- * length, with no parens to influence future backrefs
- */
-
- ST.me = scan;
- scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
-
- /* if paren positive, emulate an OPEN/CLOSE around A */
- if (ST.me->flags) {
- U32 paren = ST.me->flags;
- if (paren > PL_regsize)
- PL_regsize = paren;
- if (paren > *PL_reglastparen)
- *PL_reglastparen = paren;
- scan += NEXT_OFF(scan); /* Skip former OPEN. */
- }
- ST.A = scan;
- ST.B = next;
- ST.alen = 0;
- ST.count = 0;
- ST.minmod = minmod;
- minmod = 0;
- ST.c1 = CHRTEST_UNINIT;
- REGCP_SET(ST.cp);
-
- if (!(ST.minmod ? ARG1(ST.me) : ARG2(ST.me))) /* min/max */
- goto curlym_do_B;
-
- curlym_do_A: /* execute the A in /A{m,n}B/ */
- PL_reginput = locinput;
- PUSH_YES_STATE_GOTO(CURLYM_A, ST.A); /* match A */
- /* NOTREACHED */
-
- case CURLYM_A: /* we've just matched an A */
- locinput = st->locinput;
- nextchr = UCHARAT(locinput);
-
- ST.count++;
- /* after first match, determine A's length: u.curlym.alen */
- if (ST.count == 1) {
- if (PL_reg_match_utf8) {
- char *s = locinput;
- while (s < PL_reginput) {
- ST.alen++;
- s += UTF8SKIP(s);
- }
- }
- else {
- ST.alen = PL_reginput - locinput;
- }
- if (ST.alen == 0)
- ST.count = ST.minmod ? ARG1(ST.me) : ARG2(ST.me);
- }
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s CURLYM now matched %"IVdf" times, len=%"IVdf"...\n",
- (int)(REPORT_CODE_OFF+(depth*2)), "",
- (IV) ST.count, (IV)ST.alen)
- );
-
- locinput = PL_reginput;
-
- if (cur_eval && cur_eval->u.eval.close_paren &&
- cur_eval->u.eval.close_paren == (U32)ST.me->flags)
- goto fake_end;
-
- {
- I32 max = (ST.minmod ? ARG1(ST.me) : ARG2(ST.me));
- if ( max == REG_INFTY || ST.count < max )
- goto curlym_do_A; /* try to match another A */
- }
- goto curlym_do_B; /* try to match B */
-
- case CURLYM_A_fail: /* just failed to match an A */
- REGCP_UNWIND(ST.cp);
-
- if (ST.minmod || ST.count < ARG1(ST.me) /* min*/
- || (cur_eval && cur_eval->u.eval.close_paren &&
- cur_eval->u.eval.close_paren == (U32)ST.me->flags))
- sayNO;
-
- curlym_do_B: /* execute the B in /A{m,n}B/ */
- PL_reginput = locinput;
- if (ST.c1 == CHRTEST_UNINIT) {
- /* calculate c1 and c2 for possible match of 1st char
- * following curly */
- ST.c1 = ST.c2 = CHRTEST_VOID;
- if (HAS_TEXT(ST.B) || JUMPABLE(ST.B)) {
- regnode *text_node = ST.B;
- if (! HAS_TEXT(text_node))
- FIND_NEXT_IMPT(text_node);
- /* this used to be
-
- (HAS_TEXT(text_node) && PL_regkind[OP(text_node)] == EXACT)
-
- But the former is redundant in light of the latter.
-
- if this changes back then the macro for
- IS_TEXT and friends need to change.
- */
- if (PL_regkind[OP(text_node)] == EXACT)
- {
-
- ST.c1 = (U8)*STRING(text_node);
- switch (OP(text_node)) {
- case EXACTF: ST.c2 = PL_fold[ST.c1]; break;
- case EXACTFU: ST.c2 = PL_fold_latin1[ST.c1]; break;
- case EXACTFL: ST.c2 = PL_fold_locale[ST.c1]; break;
- default: ST.c2 = ST.c1;
- }
- }
- }
- }
-
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s CURLYM trying tail with matches=%"IVdf"...\n",
- (int)(REPORT_CODE_OFF+(depth*2)),
- "", (IV)ST.count)
- );
- if (ST.c1 != CHRTEST_VOID
- && UCHARAT(PL_reginput) != ST.c1
- && UCHARAT(PL_reginput) != ST.c2)
- {
- /* simulate B failing */
- DEBUG_OPTIMISE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s CURLYM Fast bail c1=%"IVdf" c2=%"IVdf"\n",
- (int)(REPORT_CODE_OFF+(depth*2)),"",
- (IV)ST.c1,(IV)ST.c2
- ));
- state_num = CURLYM_B_fail;
- goto reenter_switch;
- }
-
- if (ST.me->flags) {
- /* mark current A as captured */
- I32 paren = ST.me->flags;
- if (ST.count) {
- PL_regoffs[paren].start
- = HOPc(PL_reginput, -ST.alen) - PL_bostr;
- PL_regoffs[paren].end = PL_reginput - PL_bostr;
- /*dmq: *PL_reglastcloseparen = paren; */
- }
- else
- PL_regoffs[paren].end = -1;
- if (cur_eval && cur_eval->u.eval.close_paren &&
- cur_eval->u.eval.close_paren == (U32)ST.me->flags)
- {
- if (ST.count)
- goto fake_end;
- else
- sayNO;
- }
- }
-
- PUSH_STATE_GOTO(CURLYM_B, ST.B); /* match B */
- /* NOTREACHED */
-
- case CURLYM_B_fail: /* just failed to match a B */
- REGCP_UNWIND(ST.cp);
- if (ST.minmod) {
- I32 max = ARG2(ST.me);
- if (max != REG_INFTY && ST.count == max)
- sayNO;
- goto curlym_do_A; /* try to match a further A */
- }
- /* backtrack one A */
- if (ST.count == ARG1(ST.me) /* min */)
- sayNO;
- ST.count--;
- locinput = HOPc(locinput, -ST.alen);
- goto curlym_do_B; /* try to match B */
-
-#undef ST
-#define ST st->u.curly
-
-#define CURLY_SETPAREN(paren, success) \
- if (paren) { \
- if (success) { \
- PL_regoffs[paren].start = HOPc(locinput, -1) - PL_bostr; \
- PL_regoffs[paren].end = locinput - PL_bostr; \
- *PL_reglastcloseparen = paren; \
- } \
- else \
- PL_regoffs[paren].end = -1; \
- }
-
- case STAR: /* /A*B/ where A is width 1 */
- ST.paren = 0;
- ST.min = 0;
- ST.max = REG_INFTY;
- scan = NEXTOPER(scan);
- goto repeat;
- case PLUS: /* /A+B/ where A is width 1 */
- ST.paren = 0;
- ST.min = 1;
- ST.max = REG_INFTY;
- scan = NEXTOPER(scan);
- goto repeat;
- case CURLYN: /* /(A){m,n}B/ where A is width 1 */
- ST.paren = scan->flags; /* Which paren to set */
- if (ST.paren > PL_regsize)
- PL_regsize = ST.paren;
- if (ST.paren > *PL_reglastparen)
- *PL_reglastparen = ST.paren;
- ST.min = ARG1(scan); /* min to match */
- ST.max = ARG2(scan); /* max to match */
- if (cur_eval && cur_eval->u.eval.close_paren &&
- cur_eval->u.eval.close_paren == (U32)ST.paren) {
- ST.min=1;
- ST.max=1;
- }
- scan = regnext(NEXTOPER(scan) + NODE_STEP_REGNODE);
- goto repeat;
- case CURLY: /* /A{m,n}B/ where A is width 1 */
- ST.paren = 0;
- ST.min = ARG1(scan); /* min to match */
- ST.max = ARG2(scan); /* max to match */
- scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
- repeat:
- /*
- * Lookahead to avoid useless match attempts
- * when we know what character comes next.
- *
- * Used to only do .*x and .*?x, but now it allows
- * for )'s, ('s and (?{ ... })'s to be in the way
- * of the quantifier and the EXACT-like node. -- japhy
- */
-
- if (ST.min > ST.max) /* XXX make this a compile-time check? */
- sayNO;
- if (HAS_TEXT(next) || JUMPABLE(next)) {
- U8 *s;
- regnode *text_node = next;
-
- if (! HAS_TEXT(text_node))
- FIND_NEXT_IMPT(text_node);
-
- if (! HAS_TEXT(text_node))
- ST.c1 = ST.c2 = CHRTEST_VOID;
- else {
- if ( PL_regkind[OP(text_node)] != EXACT ) {
- ST.c1 = ST.c2 = CHRTEST_VOID;
- goto assume_ok_easy;
- }
- else
- s = (U8*)STRING(text_node);
-
- /* Currently we only get here when
-
- PL_rekind[OP(text_node)] == EXACT
-
- if this changes back then the macro for IS_TEXT and
- friends need to change. */
- if (!UTF_PATTERN) {
- ST.c1 = *s;
- switch (OP(text_node)) {
- case EXACTF: ST.c2 = PL_fold[ST.c1]; break;
- case EXACTFU: ST.c2 = PL_fold_latin1[ST.c1]; break;
- case EXACTFL: ST.c2 = PL_fold_locale[ST.c1]; break;
- default: ST.c2 = ST.c1; break;
- }
- }
- else { /* UTF_PATTERN */
- if (IS_TEXTFU(text_node) || IS_TEXTF(text_node)) {
- STRLEN ulen1, ulen2;
- U8 tmpbuf1[UTF8_MAXBYTES_CASE+1];
- U8 tmpbuf2[UTF8_MAXBYTES_CASE+1];
-
- to_utf8_lower((U8*)s, tmpbuf1, &ulen1);
- to_utf8_upper((U8*)s, tmpbuf2, &ulen2);
-#ifdef EBCDIC
- ST.c1 = utf8n_to_uvchr(tmpbuf1, UTF8_MAXLEN, 0,
- ckWARN(WARN_UTF8) ?
- 0 : UTF8_ALLOW_ANY);
- ST.c2 = utf8n_to_uvchr(tmpbuf2, UTF8_MAXLEN, 0,
- ckWARN(WARN_UTF8) ?
- 0 : UTF8_ALLOW_ANY);
-#else
- ST.c1 = utf8n_to_uvuni(tmpbuf1, UTF8_MAXBYTES, 0,
- uniflags);
- ST.c2 = utf8n_to_uvuni(tmpbuf2, UTF8_MAXBYTES, 0,
- uniflags);
-#endif
- }
- else {
- ST.c2 = ST.c1 = utf8n_to_uvchr(s, UTF8_MAXBYTES, 0,
- uniflags);
- }
- }
- }
- }
- else
- ST.c1 = ST.c2 = CHRTEST_VOID;
- assume_ok_easy:
-
- ST.A = scan;
- ST.B = next;
- PL_reginput = locinput;
- if (minmod) {
- minmod = 0;
- if (ST.min && regrepeat(rex, ST.A, ST.min, depth) < ST.min)
- sayNO;
- ST.count = ST.min;
- locinput = PL_reginput;
- REGCP_SET(ST.cp);
- if (ST.c1 == CHRTEST_VOID)
- goto curly_try_B_min;
-
- ST.oldloc = locinput;
-
- /* set ST.maxpos to the furthest point along the
- * string that could possibly match */
- if (ST.max == REG_INFTY) {
- ST.maxpos = PL_regeol - 1;
- if (utf8_target)
- while (UTF8_IS_CONTINUATION(*(U8*)ST.maxpos))
- ST.maxpos--;
- }
- else if (utf8_target) {
- int m = ST.max - ST.min;
- for (ST.maxpos = locinput;
- m >0 && ST.maxpos + UTF8SKIP(ST.maxpos) <= PL_regeol; m--)
- ST.maxpos += UTF8SKIP(ST.maxpos);
- }
- else {
- ST.maxpos = locinput + ST.max - ST.min;
- if (ST.maxpos >= PL_regeol)
- ST.maxpos = PL_regeol - 1;
- }
- goto curly_try_B_min_known;
-
- }
- else {
- ST.count = regrepeat(rex, ST.A, ST.max, depth);
- locinput = PL_reginput;
- if (ST.count < ST.min)
- sayNO;
- if ((ST.count > ST.min)
- && (PL_regkind[OP(ST.B)] == EOL) && (OP(ST.B) != MEOL))
- {
- /* A{m,n} must come at the end of the string, there's
- * no point in backing off ... */
- ST.min = ST.count;
- /* ...except that $ and \Z can match before *and* after
- newline at the end. Consider "\n\n" =~ /\n+\Z\n/.
- We may back off by one in this case. */
- if (UCHARAT(PL_reginput - 1) == '\n' && OP(ST.B) != EOS)
- ST.min--;
- }
- REGCP_SET(ST.cp);
- goto curly_try_B_max;
- }
- /* NOTREACHED */
-
-
- case CURLY_B_min_known_fail:
- /* failed to find B in a non-greedy match where c1,c2 valid */
- if (ST.paren && ST.count)
- PL_regoffs[ST.paren].end = -1;
-
- PL_reginput = locinput; /* Could be reset... */
- REGCP_UNWIND(ST.cp);
- /* Couldn't or didn't -- move forward. */
- ST.oldloc = locinput;
- if (utf8_target)
- locinput += UTF8SKIP(locinput);
- else
- locinput++;
- ST.count++;
- curly_try_B_min_known:
- /* find the next place where 'B' could work, then call B */
- {
- int n;
- if (utf8_target) {
- n = (ST.oldloc == locinput) ? 0 : 1;
- if (ST.c1 == ST.c2) {
- STRLEN len;
- /* set n to utf8_distance(oldloc, locinput) */
- while (locinput <= ST.maxpos &&
- utf8n_to_uvchr((U8*)locinput,
- UTF8_MAXBYTES, &len,
- uniflags) != (UV)ST.c1) {
- locinput += len;
- n++;
- }
- }
- else {
- /* set n to utf8_distance(oldloc, locinput) */
- while (locinput <= ST.maxpos) {
- STRLEN len;
- const UV c = utf8n_to_uvchr((U8*)locinput,
- UTF8_MAXBYTES, &len,
- uniflags);
- if (c == (UV)ST.c1 || c == (UV)ST.c2)
- break;
- locinput += len;
- n++;
- }
- }
- }
- else {
- if (ST.c1 == ST.c2) {
- while (locinput <= ST.maxpos &&
- UCHARAT(locinput) != ST.c1)
- locinput++;
- }
- else {
- while (locinput <= ST.maxpos
- && UCHARAT(locinput) != ST.c1
- && UCHARAT(locinput) != ST.c2)
- locinput++;
- }
- n = locinput - ST.oldloc;
- }
- if (locinput > ST.maxpos)
- sayNO;
- /* PL_reginput == oldloc now */
- if (n) {
- ST.count += n;
- if (regrepeat(rex, ST.A, n, depth) < n)
- sayNO;
- }
- PL_reginput = locinput;
- CURLY_SETPAREN(ST.paren, ST.count);
- if (cur_eval && cur_eval->u.eval.close_paren &&
- cur_eval->u.eval.close_paren == (U32)ST.paren) {
- goto fake_end;
- }
- PUSH_STATE_GOTO(CURLY_B_min_known, ST.B);
- }
- /* NOTREACHED */
-
-
- case CURLY_B_min_fail:
- /* failed to find B in a non-greedy match where c1,c2 invalid */
- if (ST.paren && ST.count)
- PL_regoffs[ST.paren].end = -1;
-
- REGCP_UNWIND(ST.cp);
- /* failed -- move forward one */
- PL_reginput = locinput;
- if (regrepeat(rex, ST.A, 1, depth)) {
- ST.count++;
- locinput = PL_reginput;
- if (ST.count <= ST.max || (ST.max == REG_INFTY &&
- ST.count > 0)) /* count overflow ? */
- {
- curly_try_B_min:
- CURLY_SETPAREN(ST.paren, ST.count);
- if (cur_eval && cur_eval->u.eval.close_paren &&
- cur_eval->u.eval.close_paren == (U32)ST.paren) {
- goto fake_end;
- }
- PUSH_STATE_GOTO(CURLY_B_min, ST.B);
- }
- }
- sayNO;
- /* NOTREACHED */
-
-
- curly_try_B_max:
- /* a successful greedy match: now try to match B */
- if (cur_eval && cur_eval->u.eval.close_paren &&
- cur_eval->u.eval.close_paren == (U32)ST.paren) {
- goto fake_end;
- }
- {
- UV c = 0;
- if (ST.c1 != CHRTEST_VOID)
- c = utf8_target ? utf8n_to_uvchr((U8*)PL_reginput,
- UTF8_MAXBYTES, 0, uniflags)
- : (UV) UCHARAT(PL_reginput);
- /* If it could work, try it. */
- if (ST.c1 == CHRTEST_VOID || c == (UV)ST.c1 || c == (UV)ST.c2) {
- CURLY_SETPAREN(ST.paren, ST.count);
- PUSH_STATE_GOTO(CURLY_B_max, ST.B);
- /* NOTREACHED */
- }
- }
- /* FALL THROUGH */
- case CURLY_B_max_fail:
- /* failed to find B in a greedy match */
- if (ST.paren && ST.count)
- PL_regoffs[ST.paren].end = -1;
-
- REGCP_UNWIND(ST.cp);
- /* back up. */
- if (--ST.count < ST.min)
- sayNO;
- PL_reginput = locinput = HOPc(locinput, -1);
- goto curly_try_B_max;
-
-#undef ST
-
- case END:
- fake_end:
- if (cur_eval) {
- /* we've just finished A in /(??{A})B/; now continue with B */
- I32 tmpix;
- st->u.eval.toggle_reg_flags
- = cur_eval->u.eval.toggle_reg_flags;
- PL_reg_flags ^= st->u.eval.toggle_reg_flags;
-
- st->u.eval.prev_rex = rex_sv; /* inner */
- SETREX(rex_sv,cur_eval->u.eval.prev_rex);
- rex = (struct regexp *)SvANY(rex_sv);
- rexi = RXi_GET(rex);
- cur_curlyx = cur_eval->u.eval.prev_curlyx;
- ReREFCNT_inc(rex_sv);
- st->u.eval.cp = regcppush(0); /* Save *all* the positions. */
-
- /* rex was changed so update the pointer in PL_reglastparen and PL_reglastcloseparen */
- PL_reglastparen = &rex->lastparen;
- PL_reglastcloseparen = &rex->lastcloseparen;
-
- REGCP_SET(st->u.eval.lastcp);
- PL_reginput = locinput;
-
- /* Restore parens of the outer rex without popping the
- * savestack */
- tmpix = PL_savestack_ix;
- PL_savestack_ix = cur_eval->u.eval.lastcp;
- regcppop(rex);
- PL_savestack_ix = tmpix;
-
- st->u.eval.prev_eval = cur_eval;
- cur_eval = cur_eval->u.eval.prev_eval;
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log, "%*s EVAL trying tail ... %"UVxf"\n",
- REPORT_CODE_OFF+depth*2, "",PTR2UV(cur_eval)););
- if ( nochange_depth )
- nochange_depth--;
-
- PUSH_YES_STATE_GOTO(EVAL_AB,
- st->u.eval.prev_eval->u.eval.B); /* match B */
- }
-
- if (locinput < reginfo->till) {
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
- "%sMatch possible, but length=%ld is smaller than requested=%ld, failing!%s\n",
- PL_colors[4],
- (long)(locinput - PL_reg_starttry),
- (long)(reginfo->till - PL_reg_starttry),
- PL_colors[5]));
-
- sayNO_SILENT; /* Cannot match: too short. */
- }
- PL_reginput = locinput; /* put where regtry can find it */
- sayYES; /* Success! */
-
- case SUCCEED: /* successful SUSPEND/UNLESSM/IFMATCH/CURLYM */
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s %ssubpattern success...%s\n",
- REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5]));
- PL_reginput = locinput; /* put where regtry can find it */
- sayYES; /* Success! */
-
-#undef ST
-#define ST st->u.ifmatch
-
- case SUSPEND: /* (?>A) */
- ST.wanted = 1;
- PL_reginput = locinput;
- goto do_ifmatch;
-
- case UNLESSM: /* -ve lookaround: (?!A), or with flags, (?<!A) */
- ST.wanted = 0;
- goto ifmatch_trivial_fail_test;
-
- case IFMATCH: /* +ve lookaround: (?=A), or with flags, (?<=A) */
- ST.wanted = 1;
- ifmatch_trivial_fail_test:
- if (scan->flags) {
- char * const s = HOPBACKc(locinput, scan->flags);
- if (!s) {
- /* trivial fail */
- if (logical) {
- logical = 0;
- sw = 1 - cBOOL(ST.wanted);
- }
- else if (ST.wanted)
- sayNO;
- next = scan + ARG(scan);
- if (next == scan)
- next = NULL;
- break;
- }
- PL_reginput = s;
- }
- else
- PL_reginput = locinput;
-
- do_ifmatch:
- ST.me = scan;
- ST.logical = logical;
- logical = 0; /* XXX: reset state of logical once it has been saved into ST */
-
- /* execute body of (?...A) */
- PUSH_YES_STATE_GOTO(IFMATCH_A, NEXTOPER(NEXTOPER(scan)));
- /* NOTREACHED */
-
- case IFMATCH_A_fail: /* body of (?...A) failed */
- ST.wanted = !ST.wanted;
- /* FALL THROUGH */
-
- case IFMATCH_A: /* body of (?...A) succeeded */
- if (ST.logical) {
- sw = cBOOL(ST.wanted);
- }
- else if (!ST.wanted)
- sayNO;
-
- if (OP(ST.me) == SUSPEND)
- locinput = PL_reginput;
- else {
- locinput = PL_reginput = st->locinput;
- nextchr = UCHARAT(locinput);
- }
- scan = ST.me + ARG(ST.me);
- if (scan == ST.me)
- scan = NULL;
- continue; /* execute B */
-
-#undef ST
-
- case LONGJMP:
- next = scan + ARG(scan);
- if (next == scan)
- next = NULL;
- break;
- case COMMIT:
- reginfo->cutpoint = PL_regeol;
- /* FALLTHROUGH */
- case PRUNE:
- PL_reginput = locinput;
- if (!scan->flags)
- sv_yes_mark = sv_commit = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
- PUSH_STATE_GOTO(COMMIT_next,next);
- /* NOTREACHED */
- case COMMIT_next_fail:
- no_final = 1;
- /* FALLTHROUGH */
- case OPFAIL:
- sayNO;
- /* NOTREACHED */
-
-#define ST st->u.mark
- case MARKPOINT:
- ST.prev_mark = mark_state;
- ST.mark_name = sv_commit = sv_yes_mark
- = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
- mark_state = st;
- ST.mark_loc = PL_reginput = locinput;
- PUSH_YES_STATE_GOTO(MARKPOINT_next,next);
- /* NOTREACHED */
- case MARKPOINT_next:
- mark_state = ST.prev_mark;
- sayYES;
- /* NOTREACHED */
- case MARKPOINT_next_fail:
- if (popmark && sv_eq(ST.mark_name,popmark))
- {
- if (ST.mark_loc > startpoint)
- reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
- popmark = NULL; /* we found our mark */
- sv_commit = ST.mark_name;
-
- DEBUG_EXECUTE_r({
- PerlIO_printf(Perl_debug_log,
- "%*s %ssetting cutpoint to mark:%"SVf"...%s\n",
- REPORT_CODE_OFF+depth*2, "",
- PL_colors[4], SVfARG(sv_commit), PL_colors[5]);
- });
- }
- mark_state = ST.prev_mark;
- sv_yes_mark = mark_state ?
- mark_state->u.mark.mark_name : NULL;
- sayNO;
- /* NOTREACHED */
- case SKIP:
- PL_reginput = locinput;
- if (scan->flags) {
- /* (*SKIP) : if we fail we cut here*/
- ST.mark_name = NULL;
- ST.mark_loc = locinput;
- PUSH_STATE_GOTO(SKIP_next,next);
- } else {
- /* (*SKIP:NAME) : if there is a (*MARK:NAME) fail where it was,
- otherwise do nothing. Meaning we need to scan
- */
- regmatch_state *cur = mark_state;
- SV *find = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
-
- while (cur) {
- if ( sv_eq( cur->u.mark.mark_name,
- find ) )
- {
- ST.mark_name = find;
- PUSH_STATE_GOTO( SKIP_next, next );
- }
- cur = cur->u.mark.prev_mark;
- }
- }
- /* Didn't find our (*MARK:NAME) so ignore this (*SKIP:NAME) */
- break;
- case SKIP_next_fail:
- if (ST.mark_name) {
- /* (*CUT:NAME) - Set up to search for the name as we
- collapse the stack*/
- popmark = ST.mark_name;
- } else {
- /* (*CUT) - No name, we cut here.*/
- if (ST.mark_loc > startpoint)
- reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
- /* but we set sv_commit to latest mark_name if there
- is one so they can test to see how things lead to this
- cut */
- if (mark_state)
- sv_commit=mark_state->u.mark.mark_name;
- }
- no_final = 1;
- sayNO;
- /* NOTREACHED */
-#undef ST
- case FOLDCHAR:
- n = ARG(scan);
- if ( n == (U32)what_len_TRICKYFOLD(locinput,utf8_target,ln) ) {
- locinput += ln;
- } else if ( LATIN_SMALL_LETTER_SHARP_S == n && !utf8_target && !UTF_PATTERN ) {
- sayNO;
- } else {
- U8 folded[UTF8_MAXBYTES_CASE+1];
- STRLEN foldlen;
- const char * const l = locinput;
- char *e = PL_regeol;
- to_uni_fold(n, folded, &foldlen);
-
- if (! foldEQ_utf8((const char*) folded, 0, foldlen, 1,
- l, &e, 0, utf8_target)) {
- sayNO;
- }
- locinput = e;
- }
- nextchr = UCHARAT(locinput);
- break;
- case LNBREAK:
- if ((n=is_LNBREAK(locinput,utf8_target))) {
- locinput += n;
- nextchr = UCHARAT(locinput);
- } else
- sayNO;
- break;
-
-#define CASE_CLASS(nAmE) \
- case nAmE: \
- if ((n=is_##nAmE(locinput,utf8_target))) { \
- locinput += n; \
- nextchr = UCHARAT(locinput); \
- } else \
- sayNO; \
- break; \
- case N##nAmE: \
- if ((n=is_##nAmE(locinput,utf8_target))) { \
- sayNO; \
- } else { \
- locinput += UTF8SKIP(locinput); \
- nextchr = UCHARAT(locinput); \
- } \
- break
-
- CASE_CLASS(VERTWS);
- CASE_CLASS(HORIZWS);
-#undef CASE_CLASS
-
- default:
- PerlIO_printf(Perl_error_log, "%"UVxf" %d\n",
- PTR2UV(scan), OP(scan));
- Perl_croak(aTHX_ "regexp memory corruption");
-
- } /* end switch */
-
- /* switch break jumps here */
- scan = next; /* prepare to execute the next op and ... */
- continue; /* ... jump back to the top, reusing st */
- /* NOTREACHED */
-
- push_yes_state:
- /* push a state that backtracks on success */
- st->u.yes.prev_yes_state = yes_state;
- yes_state = st;
- /* FALL THROUGH */
- push_state:
- /* push a new regex state, then continue at scan */
- {
- regmatch_state *newst;
-
- DEBUG_STACK_r({
- regmatch_state *cur = st;
- regmatch_state *curyes = yes_state;
- int curd = depth;
- regmatch_slab *slab = PL_regmatch_slab;
- for (;curd > -1;cur--,curd--) {
- if (cur < SLAB_FIRST(slab)) {
- slab = slab->prev;
- cur = SLAB_LAST(slab);
- }
- PerlIO_printf(Perl_error_log, "%*s#%-3d %-10s %s\n",
- REPORT_CODE_OFF + 2 + depth * 2,"",
- curd, PL_reg_name[cur->resume_state],
- (curyes == cur) ? "yes" : ""
- );
- if (curyes == cur)
- curyes = cur->u.yes.prev_yes_state;
- }
- } else
- DEBUG_STATE_pp("push")
- );
- depth++;
- st->locinput = locinput;
- newst = st+1;
- if (newst > SLAB_LAST(PL_regmatch_slab))
- newst = S_push_slab(aTHX);
- PL_regmatch_state = newst;
-
- locinput = PL_reginput;
- nextchr = UCHARAT(locinput);
- st = newst;
- continue;
- /* NOTREACHED */
- }
- }
-
- /*
- * We get here only if there's trouble -- normally "case END" is
- * the terminating point.
- */
- Perl_croak(aTHX_ "corrupted regexp pointers");
- /*NOTREACHED*/
- sayNO;
-
-yes:
- if (yes_state) {
- /* we have successfully completed a subexpression, but we must now
- * pop to the state marked by yes_state and continue from there */
- assert(st != yes_state);
-#ifdef DEBUGGING
- while (st != yes_state) {
- st--;
- if (st < SLAB_FIRST(PL_regmatch_slab)) {
- PL_regmatch_slab = PL_regmatch_slab->prev;
- st = SLAB_LAST(PL_regmatch_slab);
- }
- DEBUG_STATE_r({
- if (no_final) {
- DEBUG_STATE_pp("pop (no final)");
- } else {
- DEBUG_STATE_pp("pop (yes)");
- }
- });
- depth--;
- }
-#else
- while (yes_state < SLAB_FIRST(PL_regmatch_slab)
- || yes_state > SLAB_LAST(PL_regmatch_slab))
- {
- /* not in this slab, pop slab */
- depth -= (st - SLAB_FIRST(PL_regmatch_slab) + 1);
- PL_regmatch_slab = PL_regmatch_slab->prev;
- st = SLAB_LAST(PL_regmatch_slab);
- }
- depth -= (st - yes_state);
-#endif
- st = yes_state;
- yes_state = st->u.yes.prev_yes_state;
- PL_regmatch_state = st;
-
- if (no_final) {
- locinput= st->locinput;
- nextchr = UCHARAT(locinput);
- }
- state_num = st->resume_state + no_final;
- goto reenter_switch;
- }
-
- DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch successful!%s\n",
- PL_colors[4], PL_colors[5]));
-
- if (PL_reg_eval_set) {
- /* each successfully executed (?{...}) block does the equivalent of
- * local $^R = do {...}
- * When popping the save stack, all these locals would be undone;
- * bypass this by setting the outermost saved $^R to the latest
- * value */
- if (oreplsv != GvSV(PL_replgv))
- sv_setsv(oreplsv, GvSV(PL_replgv));
- }
- result = 1;
- goto final_exit;
-
-no:
- DEBUG_EXECUTE_r(
- PerlIO_printf(Perl_debug_log,
- "%*s %sfailed...%s\n",
- REPORT_CODE_OFF+depth*2, "",
- PL_colors[4], PL_colors[5])
- );
-
-no_silent:
- if (no_final) {
- if (yes_state) {
- goto yes;
- } else {
- goto final_exit;
- }
- }
- if (depth) {
- /* there's a previous state to backtrack to */
- st--;
- if (st < SLAB_FIRST(PL_regmatch_slab)) {
- PL_regmatch_slab = PL_regmatch_slab->prev;
- st = SLAB_LAST(PL_regmatch_slab);
- }
- PL_regmatch_state = st;
- locinput= st->locinput;
- nextchr = UCHARAT(locinput);
-
- DEBUG_STATE_pp("pop");
- depth--;
- if (yes_state == st)
- yes_state = st->u.yes.prev_yes_state;
-
- state_num = st->resume_state + 1; /* failure = success + 1 */
- goto reenter_switch;
- }
- result = 0;
-
- final_exit:
- if (rex->intflags & PREGf_VERBARG_SEEN) {
- SV *sv_err = get_sv("REGERROR", 1);
- SV *sv_mrk = get_sv("REGMARK", 1);
- if (result) {
- sv_commit = &PL_sv_no;
- if (!sv_yes_mark)
- sv_yes_mark = &PL_sv_yes;
- } else {
- if (!sv_commit)
- sv_commit = &PL_sv_yes;
- sv_yes_mark = &PL_sv_no;
- }
- sv_setsv(sv_err, sv_commit);
- sv_setsv(sv_mrk, sv_yes_mark);
- }
-
- /* clean up; in particular, free all slabs above current one */
- LEAVE_SCOPE(oldsave);
-
- return result;
-}
-
-/*
- - regrepeat - repeatedly match something simple, report how many
- */
-/*
- * [This routine now assumes that it will only match on things of length 1.
- * That was true before, but now we assume scan - reginput is the count,
- * rather than incrementing count on every character. [Er, except utf8.]]
- */
-STATIC I32
-S_regrepeat(pTHX_ const regexp *prog, const regnode *p, I32 max, int depth)
-{
- dVAR;
- register char *scan;
- register I32 c;
- register char *loceol = PL_regeol;
- register I32 hardcount = 0;
- register bool utf8_target = PL_reg_match_utf8;
-#ifndef DEBUGGING
- PERL_UNUSED_ARG(depth);
-#endif
-
- PERL_ARGS_ASSERT_REGREPEAT;
-
- scan = PL_reginput;
- if (max == REG_INFTY)
- max = I32_MAX;
- else if (max < loceol - scan)
- loceol = scan + max;
- switch (OP(p)) {
- case REG_ANY:
- if (utf8_target) {
- loceol = PL_regeol;
- while (scan < loceol && hardcount < max && *scan != '\n') {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && *scan != '\n')
- scan++;
- }
- break;
- case SANY:
- if (utf8_target) {
- loceol = PL_regeol;
- while (scan < loceol && hardcount < max) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- }
- else
- scan = loceol;
- break;
- case CANY:
- scan = loceol;
- break;
- case EXACT:
- /* To get here, EXACTish nodes must have *byte* length == 1. That
- * means they match only characters in the string that can be expressed
- * as a single byte. For non-utf8 strings, that means a simple match.
- * For utf8 strings, the character matched must be an invariant, or
- * downgradable to a single byte. The pattern's utf8ness is
- * irrelevant, as since it's a single byte, it either isn't utf8, or if
- * it is, it's an invariant */
-
- c = (U8)*STRING(p);
- assert(! UTF_PATTERN || UNI_IS_INVARIANT(c));
-
- if (! utf8_target || UNI_IS_INVARIANT(c)) {
- while (scan < loceol && UCHARAT(scan) == c) {
- scan++;
- }
- }
- else {
-
- /* Here, the string is utf8, and the pattern char is different
- * in utf8 than not, so can't compare them directly. Outside the
- * loop, find find the two utf8 bytes that represent c, and then
- * look for those in sequence in the utf8 string */
- U8 high = UTF8_TWO_BYTE_HI(c);
- U8 low = UTF8_TWO_BYTE_LO(c);
- loceol = PL_regeol;
-
- while (hardcount < max
- && scan + 1 < loceol
- && UCHARAT(scan) == high
- && UCHARAT(scan + 1) == low)
- {
- scan += 2;
- hardcount++;
- }
- }
- break;
- case EXACTFL:
- PL_reg_flags |= RF_tainted;
- /* FALL THROUGH */
- case EXACTF:
- case EXACTFU:
-
- /* The comments for the EXACT case above apply as well to these fold
- * ones */
-
- c = (U8)*STRING(p);
- assert(! UTF_PATTERN || UNI_IS_INVARIANT(c));
-
- if (utf8_target) { /* Use full Unicode fold matching */
-
- /* For the EXACTFL case, It doesn't really make sense to compare
- * locale and utf8, but it is best we can do. The documents warn
- * against mixing them */
-
- char *tmpeol = loceol;
- while (hardcount < max
- && foldEQ_utf8(scan, &tmpeol, 0, utf8_target,
- STRING(p), NULL, 1, cBOOL(UTF_PATTERN)))
- {
- scan = tmpeol;
- tmpeol = loceol;
- hardcount++;
- }
-
- /* XXX Note that the above handles properly the German sharp s in
- * the pattern matching ss in the string. But it doesn't handle
- * properly cases where the string contains say 'LIGATURE ff' and
- * the pattern is 'f+'. This would require, say, a new function or
- * revised interface to foldEQ_utf8(), in which the maximum number
- * of characters to match could be passed and it would return how
- * many actually did. This is just one of many cases where
- * multi-char folds don't work properly, and so the fix is being
- * deferred */
- }
- else {
- U8 folded;
-
- /* Here, the string isn't utf8 and c is a single byte; and either
- * the pattern isn't utf8 or c is an invariant, so its utf8ness
- * doesn't affect c. Can just do simple comparisons for exact or
- * fold matching. */
- switch (OP(p)) {
- case EXACTF: folded = PL_fold[c]; break;
- case EXACTFU: folded = PL_fold_latin1[c]; break;
- case EXACTFL: folded = PL_fold_locale[c]; break;
- default: Perl_croak(aTHX_ "panic: Unexpected op %u", OP(p));
- }
- while (scan < loceol &&
- (UCHARAT(scan) == c || UCHARAT(scan) == folded))
- {
- scan++;
- }
- }
- break;
- case ANYOF:
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol &&
- reginclass(prog, p, (U8*)scan, 0, utf8_target)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && REGINCLASS(prog, p, (U8*)scan))
- scan++;
- }
- break;
- case ALNUM:
- if (utf8_target) {
- loceol = PL_regeol;
- LOAD_UTF8_CHARCLASS_ALNUM();
- while (hardcount < max && scan < loceol &&
- swash_fetch(PL_utf8_alnum, (U8*)scan, utf8_target))
- {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else if (FLAGS(p) & USE_UNI) {
- while (scan < loceol && isWORDCHAR_L1((U8) *scan)) {
- scan++;
- }
- } else {
- while (scan < loceol && isALNUM((U8) *scan)) {
- scan++;
- }
- }
- break;
- case ALNUML:
- PL_reg_flags |= RF_tainted;
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol &&
- isALNUM_LC_utf8((U8*)scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && isALNUM_LC(*scan))
- scan++;
- }
- break;
- case NALNUM:
- if (utf8_target) {
- loceol = PL_regeol;
- LOAD_UTF8_CHARCLASS_ALNUM();
- while (hardcount < max && scan < loceol &&
- !swash_fetch(PL_utf8_alnum, (U8*)scan, utf8_target))
- {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else if (FLAGS(p) & USE_UNI) {
- while (scan < loceol && ! isWORDCHAR_L1((U8) *scan)) {
- scan++;
- }
- } else {
- while (scan < loceol && ! isALNUM((U8) *scan)) {
- scan++;
- }
- }
- break;
- case NALNUML:
- PL_reg_flags |= RF_tainted;
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol &&
- !isALNUM_LC_utf8((U8*)scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && !isALNUM_LC(*scan))
- scan++;
- }
- break;
- case SPACE:
- if (utf8_target) {
- loceol = PL_regeol;
- LOAD_UTF8_CHARCLASS_SPACE();
- while (hardcount < max && scan < loceol &&
- (*scan == ' ' ||
- swash_fetch(PL_utf8_space,(U8*)scan, utf8_target)))
- {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else if (FLAGS(p) & USE_UNI) {
- while (scan < loceol && isSPACE_L1((U8) *scan)) {
- scan++;
- }
- } else {
- while (scan < loceol && isSPACE((U8) *scan))
- scan++;
- }
- break;
- case SPACEL:
- PL_reg_flags |= RF_tainted;
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol &&
- isSPACE_LC_utf8((U8*)scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && isSPACE_LC(*scan))
- scan++;
- }
- break;
- case NSPACE:
- if (utf8_target) {
- loceol = PL_regeol;
- LOAD_UTF8_CHARCLASS_SPACE();
- while (hardcount < max && scan < loceol &&
- !(*scan == ' ' ||
- swash_fetch(PL_utf8_space,(U8*)scan, utf8_target)))
- {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else if (FLAGS(p) & USE_UNI) {
- while (scan < loceol && ! isSPACE_L1((U8) *scan)) {
- scan++;
- }
- } else {
- while (scan < loceol && ! isSPACE((U8) *scan)) {
- scan++;
- }
- }
- break;
- case NSPACEL:
- PL_reg_flags |= RF_tainted;
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol &&
- !isSPACE_LC_utf8((U8*)scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && !isSPACE_LC(*scan))
- scan++;
- }
- break;
- case DIGIT:
- if (utf8_target) {
- loceol = PL_regeol;
- LOAD_UTF8_CHARCLASS_DIGIT();
- while (hardcount < max && scan < loceol &&
- swash_fetch(PL_utf8_digit, (U8*)scan, utf8_target)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && isDIGIT(*scan))
- scan++;
- }
- break;
- case DIGITL:
- PL_reg_flags |= RF_tainted;
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol &&
- isDIGIT_LC_utf8((U8*)scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && isDIGIT_LC(*scan))
- scan++;
- }
- break;
- case NDIGIT:
- if (utf8_target) {
- loceol = PL_regeol;
- LOAD_UTF8_CHARCLASS_DIGIT();
- while (hardcount < max && scan < loceol &&
- !swash_fetch(PL_utf8_digit, (U8*)scan, utf8_target)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && !isDIGIT(*scan))
- scan++;
- }
- case NDIGITL:
- PL_reg_flags |= RF_tainted;
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol &&
- !isDIGIT_LC_utf8((U8*)scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && !isDIGIT_LC(*scan))
- scan++;
- }
- break;
- case LNBREAK:
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol && (c=is_LNBREAK_utf8(scan))) {
- scan += c;
- hardcount++;
- }
- } else {
- /*
- LNBREAK can match two latin chars, which is ok,
- because we have a null terminated string, but we
- have to use hardcount in this situation
- */
- while (scan < loceol && (c=is_LNBREAK_latin1(scan))) {
- scan+=c;
- hardcount++;
- }
- }
- break;
- case HORIZWS:
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol && (c=is_HORIZWS_utf8(scan))) {
- scan += c;
- hardcount++;
- }
- } else {
- while (scan < loceol && is_HORIZWS_latin1(scan))
- scan++;
- }
- break;
- case NHORIZWS:
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol && !is_HORIZWS_utf8(scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && !is_HORIZWS_latin1(scan))
- scan++;
-
- }
- break;
- case VERTWS:
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol && (c=is_VERTWS_utf8(scan))) {
- scan += c;
- hardcount++;
- }
- } else {
- while (scan < loceol && is_VERTWS_latin1(scan))
- scan++;
-
- }
- break;
- case NVERTWS:
- if (utf8_target) {
- loceol = PL_regeol;
- while (hardcount < max && scan < loceol && !is_VERTWS_utf8(scan)) {
- scan += UTF8SKIP(scan);
- hardcount++;
- }
- } else {
- while (scan < loceol && !is_VERTWS_latin1(scan))
- scan++;
-
- }
- break;
-
- default: /* Called on something of 0 width. */
- break; /* So match right here or not at all. */
- }
-
- if (hardcount)
- c = hardcount;
- else
- c = scan - PL_reginput;
- PL_reginput = scan;
-
- DEBUG_r({
- GET_RE_DEBUG_FLAGS_DECL;
- DEBUG_EXECUTE_r({
- SV * const prop = sv_newmortal();
- regprop(prog, prop, p);
- PerlIO_printf(Perl_debug_log,
- "%*s %s can match %"IVdf" times out of %"IVdf"...\n",
- REPORT_CODE_OFF + depth*2, "", SvPVX_const(prop),(IV)c,(IV)max);
- });
- });
-
- return(c);
-}
-
-
-#if !defined(PERL_IN_XSUB_RE) || defined(PLUGGABLE_RE_EXTENSION)
-/*
-- regclass_swash - prepare the utf8 swash
-*/
-
-SV *
-Perl_regclass_swash(pTHX_ const regexp *prog, register const regnode* node, bool doinit, SV** listsvp, SV **altsvp)
-{
- dVAR;
- SV *sw = NULL;
- SV *si = NULL;
- SV *alt = NULL;
- RXi_GET_DECL(prog,progi);
- const struct reg_data * const data = prog ? progi->data : NULL;
-
- PERL_ARGS_ASSERT_REGCLASS_SWASH;
-
- if (data && data->count) {
- const U32 n = ARG(node);
-
- if (data->what[n] == 's') {
- SV * const rv = MUTABLE_SV(data->data[n]);
- AV * const av = MUTABLE_AV(SvRV(rv));
- SV **const ary = AvARRAY(av);
- SV **a, **b;
-
- /* See the end of regcomp.c:S_regclass() for
- * documentation of these array elements. */
-
- si = *ary;
- a = SvROK(ary[1]) ? &ary[1] : NULL;
- b = SvTYPE(ary[2]) == SVt_PVAV ? &ary[2] : NULL;
-
- if (a)
- sw = *a;
- else if (si && doinit) {
- sw = swash_init("utf8", "", si, 1, 0);
- (void)av_store(av, 1, sw);
- }
- if (b)
- alt = *b;
- }
- }
-
- if (listsvp)
- *listsvp = si;
- if (altsvp)
- *altsvp = alt;
-
- return sw;
-}
-#endif
-
-/*
- - reginclass - determine if a character falls into a character class
-
- n is the ANYOF regnode
- p is the target string
- lenp is pointer to the maximum number of bytes of how far to go in p
- (This is assumed wthout checking to always be at least the current
- character's size)
- utf8_target tells whether p is in UTF-8.
-
- Returns true if matched; false otherwise. If lenp is not NULL, on return
- from a successful match, the value it points to will be updated to how many
- bytes in p were matched. If there was no match, the value is undefined,
- possibly changed from the input.
-
- */
-
-STATIC bool
-S_reginclass(pTHX_ const regexp * const prog, register const regnode * const n, register const U8* const p, STRLEN* lenp, register const bool utf8_target)
-{
- dVAR;
- const char flags = ANYOF_FLAGS(n);
- bool match = FALSE;
- UV c = *p;
- STRLEN c_len = 0;
- STRLEN maxlen;
-
- PERL_ARGS_ASSERT_REGINCLASS;
-
- /* If c is not already the code point, get it */
- if (utf8_target && !UTF8_IS_INVARIANT(c)) {
- c = utf8n_to_uvchr(p, UTF8_MAXBYTES, &c_len,
- (UTF8_ALLOW_DEFAULT & UTF8_ALLOW_ANYUV)
- | UTF8_ALLOW_FFFF | UTF8_CHECK_ONLY);
- /* see [perl #37836] for UTF8_ALLOW_ANYUV; [perl #38293] for
- * UTF8_ALLOW_FFFF */
- if (c_len == (STRLEN)-1)
- Perl_croak(aTHX_ "Malformed UTF-8 character (fatal)");
- }
- else {
- c_len = 1;
- }
-
- /* Use passed in max length, or one character if none passed in or less
- * than one character. And assume will match just one character. This is
- * overwritten later if matched more. */
- if (lenp) {
- maxlen = (*lenp > c_len) ? *lenp : c_len;
- *lenp = c_len;
-
- }
- else {
- maxlen = c_len;
- }
-
- /* If this character is potentially in the bitmap, check it */
- if (c < 256) {
- if (ANYOF_BITMAP_TEST(n, c))
- match = TRUE;
- else if (flags & ANYOF_FOLD) {
- U8 f;
-
- if (flags & ANYOF_LOCALE) {
- PL_reg_flags |= RF_tainted;
- f = PL_fold_locale[c];
- }
- else
- f = PL_fold[c];
- if (f != c && ANYOF_BITMAP_TEST(n, f))
- match = TRUE;
- }
-
- if (!match && ANYOF_CLASS_TEST_ANY_SET(n)) {
- PL_reg_flags |= RF_tainted; /* CLASS implies LOCALE */
- if (
- (ANYOF_CLASS_TEST(n, ANYOF_ALNUM) && isALNUM_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NALNUM) && !isALNUM_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_SPACE) && isSPACE_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NSPACE) && !isSPACE_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_DIGIT) && isDIGIT_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NDIGIT) && !isDIGIT_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_ALNUMC) && isALNUMC_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NALNUMC) && !isALNUMC_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_ALPHA) && isALPHA_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NALPHA) && !isALPHA_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_ASCII) && isASCII(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NASCII) && !isASCII(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_CNTRL) && isCNTRL_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NCNTRL) && !isCNTRL_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_GRAPH) && isGRAPH_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NGRAPH) && !isGRAPH_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_LOWER) && isLOWER_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NLOWER) && !isLOWER_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_PRINT) && isPRINT_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NPRINT) && !isPRINT_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_PUNCT) && isPUNCT_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NPUNCT) && !isPUNCT_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_UPPER) && isUPPER_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NUPPER) && !isUPPER_LC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_XDIGIT) && isXDIGIT(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NXDIGIT) && !isXDIGIT(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_PSXSPC) && isPSXSPC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NPSXSPC) && !isPSXSPC(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_BLANK) && isBLANK(c)) ||
- (ANYOF_CLASS_TEST(n, ANYOF_NBLANK) && !isBLANK(c))
- ) /* How's that for a conditional? */
- {
- match = TRUE;
- }
- }
- }
-
- /* If the bitmap didn't (or couldn't) match, and something outside the
- * bitmap could match, try that */
- if (!match) {
- if (utf8_target && (flags & ANYOF_UNICODE_ALL)) {
- if (c >= 256
- || ((flags & ANYOF_FOLD) /* Latin1 1 that has a non-Latin1 fold
- should match */
- && _HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(c)))
- {
- match = TRUE;
- }
- }
- if (!match && ((flags & ANYOF_NONBITMAP_NON_UTF8)
- || (utf8_target && flags & ANYOF_UTF8)))
- {
- AV *av;
- SV * const sw = regclass_swash(prog, n, TRUE, 0, (SV**)&av);
-
- if (sw) {
- U8 * utf8_p;
- if (utf8_target) {
- utf8_p = (U8 *) p;
- } else {
- STRLEN len = 1;
- utf8_p = bytes_to_utf8(p, &len);
- }
- if (swash_fetch(sw, utf8_p, 1))
- match = TRUE;
- else if (flags & ANYOF_FOLD) {
- if (!match && lenp && av) {
- I32 i;
- for (i = 0; i <= av_len(av); i++) {
- SV* const sv = *av_fetch(av, i, FALSE);
- STRLEN len;
- const char * const s = SvPV_const(sv, len);
- if (len <= maxlen && memEQ(s, (char*)utf8_p, len)) {
- *lenp = len;
- match = TRUE;
- break;
- }
- }
- }
- if (!match) { /* See if the folded version matches */
- U8 folded[UTF8_MAXBYTES_CASE+1];
- SV** listp;
- STRLEN foldlen;
-
- to_utf8_fold(utf8_p, folded, &foldlen);
-
- /* Consider "k" =~ /[K]/i. The line above would have
- * just folded the 'k' to itself, and that isn't going
- * to match 'K'. So we look through the closure of
- * everything that folds to 'k'. That will find the
- * 'K'. Initialize the list, if necessary */
- if (! PL_utf8_foldclosures) {
-
- /* If the folds haven't been read in, call a fold
- * function to force that */
- if (! PL_utf8_tofold) {
- U8 dummy[UTF8_MAXBYTES+1];
- STRLEN dummy_len;
- to_utf8_fold((U8*) "A", dummy, &dummy_len);
- }
- PL_utf8_foldclosures =
- _swash_inversion_hash(PL_utf8_tofold);
- }
-
- /* The data structure is a hash with the keys every
- * character that is folded to, like 'k', and the
- * values each an array of everything that folds to its
- * key. e.g. [ 'k', 'K', KELVIN_SIGN ] */
- if ((listp = hv_fetch(PL_utf8_foldclosures,
- (char *) folded, foldlen, FALSE)))
- {
- AV* list = (AV*) *listp;
- IV i;
- for (i = 0; i <= av_len(list); i++) {
- SV** try_p = av_fetch(list, i, FALSE);
- char* try_c;
- if (try_p == NULL) {
- Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
- }
- /* Don't have to worry about embeded nulls
- * since NULL isn't folded or foldable */
- try_c = SvPVX(*try_p);
-
- /* The fold in a few cases of an above Latin1
- * char is in the Latin1 range, and hence may
- * be in the bitmap */
- if (UTF8_IS_INVARIANT(*try_c)
- && ANYOF_BITMAP_TEST(n,
- UNI_TO_NATIVE(*try_c)))
- {
- match = TRUE;
- break;
- }
- else if
- (UTF8_IS_DOWNGRADEABLE_START(*try_c)
- && ANYOF_BITMAP_TEST(n, UNI_TO_NATIVE(
- TWO_BYTE_UTF8_TO_UNI(try_c[0],
- try_c[1]))))
- {
- /* Since the fold comes from internally
- * generated data, we can safely assume it
- * is valid utf8 in the test above */
- match = TRUE;
- break;
- } else if (swash_fetch(sw, (U8*) try_c, 1)) {
- match = TRUE;
- break;
- }
- }
- }
- }
- }
-
- /* If we allocated a string above, free it */
- if (! utf8_target) Safefree(utf8_p);
- }
- }
- }
-
- return (flags & ANYOF_INVERT) ? !match : match;
-}
-
-STATIC U8 *
-S_reghop3(U8 *s, I32 off, const U8* lim)
-{
- dVAR;
-
- PERL_ARGS_ASSERT_REGHOP3;
-
- if (off >= 0) {
- while (off-- && s < lim) {
- /* XXX could check well-formedness here */
- s += UTF8SKIP(s);
- }
- }
- else {
- while (off++ && s > lim) {
- s--;
- if (UTF8_IS_CONTINUED(*s)) {
- while (s > lim && UTF8_IS_CONTINUATION(*s))
- s--;
- }
- /* XXX could check well-formedness here */
- }
- }
- return s;
-}
-
-#ifdef XXX_dmq
-/* there are a bunch of places where we use two reghop3's that should
- be replaced with this routine. but since thats not done yet
- we ifdef it out - dmq
-*/
-STATIC U8 *
-S_reghop4(U8 *s, I32 off, const U8* llim, const U8* rlim)
-{
- dVAR;
-
- PERL_ARGS_ASSERT_REGHOP4;
-
- if (off >= 0) {
- while (off-- && s < rlim) {
- /* XXX could check well-formedness here */
- s += UTF8SKIP(s);
- }
- }
- else {
- while (off++ && s > llim) {
- s--;
- if (UTF8_IS_CONTINUED(*s)) {
- while (s > llim && UTF8_IS_CONTINUATION(*s))
- s--;
- }
- /* XXX could check well-formedness here */
- }
- }
- return s;
-}
-#endif
-
-STATIC U8 *
-S_reghopmaybe3(U8* s, I32 off, const U8* lim)
-{
- dVAR;
-
- PERL_ARGS_ASSERT_REGHOPMAYBE3;
-
- if (off >= 0) {
- while (off-- && s < lim) {
- /* XXX could check well-formedness here */
- s += UTF8SKIP(s);
- }
- if (off >= 0)
- return NULL;
- }
- else {
- while (off++ && s > lim) {
- s--;
- if (UTF8_IS_CONTINUED(*s)) {
- while (s > lim && UTF8_IS_CONTINUATION(*s))
- s--;
- }
- /* XXX could check well-formedness here */
- }
- if (off <= 0)
- return NULL;
- }
- return s;
-}
-
-static void
-restore_pos(pTHX_ void *arg)
-{
- dVAR;
- regexp * const rex = (regexp *)arg;
- if (PL_reg_eval_set) {
- if (PL_reg_oldsaved) {
- rex->subbeg = PL_reg_oldsaved;
- rex->sublen = PL_reg_oldsavedlen;
-#ifdef PERL_OLD_COPY_ON_WRITE
- rex->saved_copy = PL_nrs;
-#endif
- RXp_MATCH_COPIED_on(rex);
- }
- PL_reg_magic->mg_len = PL_reg_oldpos;
- PL_reg_eval_set = 0;
- PL_curpm = PL_reg_oldcurpm;
- }
-}
-
-STATIC void
-S_to_utf8_substr(pTHX_ register regexp *prog)
-{
- int i = 1;
-
- PERL_ARGS_ASSERT_TO_UTF8_SUBSTR;
-
- do {
- if (prog->substrs->data[i].substr
- && !prog->substrs->data[i].utf8_substr) {
- SV* const sv = newSVsv(prog->substrs->data[i].substr);
- prog->substrs->data[i].utf8_substr = sv;
- sv_utf8_upgrade(sv);
- if (SvVALID(prog->substrs->data[i].substr)) {
- const U8 flags = BmFLAGS(prog->substrs->data[i].substr);
- if (flags & FBMcf_TAIL) {
- /* Trim the trailing \n that fbm_compile added last
- time. */
- SvCUR_set(sv, SvCUR(sv) - 1);
- /* Whilst this makes the SV technically "invalid" (as its
- buffer is no longer followed by "\0") when fbm_compile()
- adds the "\n" back, a "\0" is restored. */
- }
- fbm_compile(sv, flags);
- }
- if (prog->substrs->data[i].substr == prog->check_substr)
- prog->check_utf8 = sv;
- }
- } while (i--);
-}
-
-STATIC void
-S_to_byte_substr(pTHX_ register regexp *prog)
-{
- dVAR;
- int i = 1;
-
- PERL_ARGS_ASSERT_TO_BYTE_SUBSTR;
-
- do {
- if (prog->substrs->data[i].utf8_substr
- && !prog->substrs->data[i].substr) {
- SV* sv = newSVsv(prog->substrs->data[i].utf8_substr);
- if (sv_utf8_downgrade(sv, TRUE)) {
- if (SvVALID(prog->substrs->data[i].utf8_substr)) {
- const U8 flags
- = BmFLAGS(prog->substrs->data[i].utf8_substr);
- if (flags & FBMcf_TAIL) {
- /* Trim the trailing \n that fbm_compile added last
- time. */
- SvCUR_set(sv, SvCUR(sv) - 1);
- }
- fbm_compile(sv, flags);
- }
- } else {
- SvREFCNT_dec(sv);
- sv = &PL_sv_undef;
- }
- prog->substrs->data[i].substr = sv;
- if (prog->substrs->data[i].utf8_substr == prog->check_utf8)
- prog->check_substr = sv;
- }
- } while (i--);
-}
-
-/*
- * Local variables:
- * c-indentation-style: bsd
- * c-basic-offset: 4
- * indent-tabs-mode: t
- * End:
- *
- * ex: set ts=8 sts=4 sw=4 noet:
- */