+/* regexec.c
+ */
+
+/*
+ * One Ring to rule them all, One Ring to find them
+ &
+ * [p.v of _The Lord of the Rings_, opening poem]
+ * [p.50 of _The Lord of the Rings_, I/iii: "The Shadow of the Past"]
+ * [p.254 of _The Lord of the Rings_, II/ii: "The Council of Elrond"]
+ */
+
+/* This file contains functions for executing a regular expression. See
+ * also regcomp.c which funnily enough, contains functions for compiling
+ * a regular expression.
+ *
+ * This file is also copied at build time to ext/re/re_exec.c, where
+ * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
+ * This causes the main functions to be compiled under new names and with
+ * debugging support added, which makes "use re 'debug'" work.
+ */
+
+/* NOTE: this is derived from Henry Spencer's regexp code, and should not
+ * confused with the original package (see point 3 below). Thanks, Henry!
+ */
+
+/* Additional note: this code is very heavily munged from Henry's version
+ * in places. In some spots I've traded clarity for efficiency, so don't
+ * blame Henry for some of the lack of readability.
+ */
+
+/* The names of the functions have been changed from regcomp and
+ * regexec to pregcomp and pregexec in order to avoid conflicts
+ * with the POSIX routines of the same names.
+*/
+
+#ifdef PERL_EXT_RE_BUILD
+#include "re_top.h"
+#endif
+
+/*
+ * pregcomp and pregexec -- regsub and regerror are not used in perl
+ *
+ * Copyright (c) 1986 by University of Toronto.
+ * Written by Henry Spencer. Not derived from licensed software.
+ *
+ * Permission is granted to anyone to use this software for any
+ * purpose on any computer system, and to redistribute it freely,
+ * subject to the following restrictions:
+ *
+ * 1. The author is not responsible for the consequences of use of
+ * this software, no matter how awful, even if they arise
+ * from defects in it.
+ *
+ * 2. The origin of this software must not be misrepresented, either
+ * by explicit claim or by omission.
+ *
+ * 3. Altered versions must be plainly marked as such, and must not
+ * be misrepresented as being the original software.
+ *
+ **** Alterations to Henry's code are...
+ ****
+ **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ **** by Larry Wall and others
+ ****
+ **** You may distribute under the terms of either the GNU General Public
+ **** License or the Artistic License, as specified in the README file.
+ *
+ * Beware that some of this code is subtly aware of the way operator
+ * precedence is structured in regular expressions. Serious changes in
+ * regular-expression syntax might require a total rethink.
+ */
+#include "EXTERN.h"
+#define PERL_IN_REGEXEC_C
+#include "perl.h"
+#include "re_defs.h"
+
+#ifdef PERL_IN_XSUB_RE
+# include "re_comp.h"
+#else
+# include "regcomp.h"
+#endif
+
+#define RF_tainted 1 /* tainted information used? e.g. locale */
+#define RF_warned 2 /* warned about big count? */
+
+#define RF_utf8 8 /* Pattern contains multibyte chars? */
+
+#define UTF_PATTERN ((PL_reg_flags & RF_utf8) != 0)
+
+#define RS_init 1 /* eval environment created */
+#define RS_set 2 /* replsv value is set */
+
+#ifndef STATIC
+#define STATIC static
+#endif
+
+/* Valid for non-utf8 strings, non-ANYOFV nodes only: avoids the reginclass
+ * call if there are no complications: i.e., if everything matchable is
+ * straight forward in the bitmap */
+#define REGINCLASS(prog,p,c) (ANYOF_FLAGS(p) ? reginclass(prog,p,c,0,0) \
+ : ANYOF_BITMAP_TEST(p,*(c)))
+
+/*
+ * Forwards.
+ */
+
+#define CHR_SVLEN(sv) (utf8_target ? sv_len_utf8(sv) : SvCUR(sv))
+#define CHR_DIST(a,b) (PL_reg_match_utf8 ? utf8_distance(a,b) : a - b)
+
+#define HOPc(pos,off) \
+ (char *)(PL_reg_match_utf8 \
+ ? reghop3((U8*)pos, off, (U8*)(off >= 0 ? PL_regeol : PL_bostr)) \
+ : (U8*)(pos + off))
+#define HOPBACKc(pos, off) \
+ (char*)(PL_reg_match_utf8\
+ ? reghopmaybe3((U8*)pos, -off, (U8*)PL_bostr) \
+ : (pos - off >= PL_bostr) \
+ ? (U8*)pos - off \
+ : NULL)
+
+#define HOP3(pos,off,lim) (PL_reg_match_utf8 ? reghop3((U8*)(pos), off, (U8*)(lim)) : (U8*)(pos + off))
+#define HOP3c(pos,off,lim) ((char*)HOP3(pos,off,lim))
+
+/* these are unrolled below in the CCC_TRY_XXX defined */
+#ifdef EBCDIC
+ /* Often 'str' is a hard-coded utf8 string instead of utfebcdic. so just
+ * skip the check on EBCDIC platforms */
+# define LOAD_UTF8_CHARCLASS(class,str) LOAD_UTF8_CHARCLASS_NO_CHECK(class)
+#else
+# define LOAD_UTF8_CHARCLASS(class,str) STMT_START { \
+ if (!CAT2(PL_utf8_,class)) { \
+ bool ok; \
+ ENTER; save_re_context(); \
+ ok=CAT2(is_utf8_,class)((const U8*)str); \
+ assert(ok); assert(CAT2(PL_utf8_,class)); LEAVE; } } STMT_END
+#endif
+
+/* Doesn't do an assert to verify that is correct */
+#define LOAD_UTF8_CHARCLASS_NO_CHECK(class) STMT_START { \
+ if (!CAT2(PL_utf8_,class)) { \
+ bool throw_away PERL_UNUSED_DECL; \
+ ENTER; save_re_context(); \
+ throw_away = CAT2(is_utf8_,class)((const U8*)" "); \
+ LEAVE; } } STMT_END
+
+#define LOAD_UTF8_CHARCLASS_ALNUM() LOAD_UTF8_CHARCLASS(alnum,"a")
+#define LOAD_UTF8_CHARCLASS_DIGIT() LOAD_UTF8_CHARCLASS(digit,"0")
+#define LOAD_UTF8_CHARCLASS_SPACE() LOAD_UTF8_CHARCLASS(space," ")
+
+#define LOAD_UTF8_CHARCLASS_GCB() /* Grapheme cluster boundaries */ \
+ LOAD_UTF8_CHARCLASS(X_begin, " "); \
+ LOAD_UTF8_CHARCLASS(X_non_hangul, "A"); \
+ /* These are utf8 constants, and not utf-ebcdic constants, so the \
+ * assert should likely and hopefully fail on an EBCDIC machine */ \
+ LOAD_UTF8_CHARCLASS(X_extend, "\xcc\x80"); /* U+0300 */ \
+ \
+ /* No asserts are done for these, in case called on an early \
+ * Unicode version in which they map to nothing */ \
+ LOAD_UTF8_CHARCLASS_NO_CHECK(X_prepend);/* U+0E40 "\xe0\xb9\x80" */ \
+ LOAD_UTF8_CHARCLASS_NO_CHECK(X_L); /* U+1100 "\xe1\x84\x80" */ \
+ LOAD_UTF8_CHARCLASS_NO_CHECK(X_LV); /* U+AC00 "\xea\xb0\x80" */ \
+ LOAD_UTF8_CHARCLASS_NO_CHECK(X_LVT); /* U+AC01 "\xea\xb0\x81" */ \
+ LOAD_UTF8_CHARCLASS_NO_CHECK(X_LV_LVT_V);/* U+AC01 "\xea\xb0\x81" */\
+ LOAD_UTF8_CHARCLASS_NO_CHECK(X_T); /* U+11A8 "\xe1\x86\xa8" */ \
+ LOAD_UTF8_CHARCLASS_NO_CHECK(X_V) /* U+1160 "\xe1\x85\xa0" */
+
+#define PLACEHOLDER /* Something for the preprocessor to grab onto */
+
+/* The actual code for CCC_TRY, which uses several variables from the routine
+ * it's callable from. It is designed to be the bulk of a case statement.
+ * FUNC is the macro or function to call on non-utf8 targets that indicate if
+ * nextchr matches the class.
+ * UTF8_TEST is the whole test string to use for utf8 targets
+ * LOAD is what to use to test, and if not present to load in the swash for the
+ * class
+ * POS_OR_NEG is either empty or ! to complement the results of FUNC or
+ * UTF8_TEST test.
+ * The logic is: Fail if we're at the end-of-string; otherwise if the target is
+ * utf8 and a variant, load the swash if necessary and test using the utf8
+ * test. Advance to the next character if test is ok, otherwise fail; If not
+ * utf8 or an invariant under utf8, use the non-utf8 test, and fail if it
+ * fails, or advance to the next character */
+
+#define _CCC_TRY_CODE(POS_OR_NEG, FUNC, UTF8_TEST, CLASS, STR) \
+ if (locinput >= PL_regeol) { \
+ sayNO; \
+ } \
+ if (utf8_target && UTF8_IS_CONTINUED(nextchr)) { \
+ LOAD_UTF8_CHARCLASS(CLASS, STR); \
+ if (POS_OR_NEG (UTF8_TEST)) { \
+ sayNO; \
+ } \
+ locinput += PL_utf8skip[nextchr]; \
+ nextchr = UCHARAT(locinput); \
+ break; \
+ } \
+ if (POS_OR_NEG (FUNC(nextchr))) { \
+ sayNO; \
+ } \
+ nextchr = UCHARAT(++locinput); \
+ break;
+
+/* Handle the non-locale cases for a character class and its complement. It
+ * calls _CCC_TRY_CODE with a ! to complement the test for the character class.
+ * This is because that code fails when the test succeeds, so we want to have
+ * the test fail so that the code succeeds. The swash is stored in a
+ * predictable PL_ place */
+#define _CCC_TRY_NONLOCALE(NAME, NNAME, FUNC, \
+ CLASS, STR) \
+ case NAME: \
+ _CCC_TRY_CODE( !, FUNC, \
+ cBOOL(swash_fetch(CAT2(PL_utf8_,CLASS), \
+ (U8*)locinput, TRUE)), \
+ CLASS, STR) \
+ case NNAME: \
+ _CCC_TRY_CODE( PLACEHOLDER , FUNC, \
+ cBOOL(swash_fetch(CAT2(PL_utf8_,CLASS), \
+ (U8*)locinput, TRUE)), \
+ CLASS, STR) \
+
+/* Generate the case statements for both locale and non-locale character
+ * classes in regmatch for classes that don't have special unicode semantics.
+ * Locales don't use an immediate swash, but an intermediary special locale
+ * function that is called on the pointer to the current place in the input
+ * string. That function will resolve to needing the same swash. One might
+ * think that because we don't know what the locale will match, we shouldn't
+ * check with the swash loading function that it loaded properly; ie, that we
+ * should use LOAD_UTF8_CHARCLASS_NO_CHECK for those, but what is passed to the
+ * regular LOAD_UTF8_CHARCLASS is in non-locale terms, and so locale is
+ * irrelevant here */
+#define CCC_TRY(NAME, NNAME, FUNC, \
+ NAMEL, NNAMEL, LCFUNC, LCFUNC_utf8, \
+ NAMEA, NNAMEA, FUNCA, \
+ CLASS, STR) \
+ case NAMEL: \
+ PL_reg_flags |= RF_tainted; \
+ _CCC_TRY_CODE( !, LCFUNC, LCFUNC_utf8((U8*)locinput), CLASS, STR) \
+ case NNAMEL: \
+ PL_reg_flags |= RF_tainted; \
+ _CCC_TRY_CODE( PLACEHOLDER, LCFUNC, LCFUNC_utf8((U8*)locinput), \
+ CLASS, STR) \
+ case NAMEA: \
+ if (locinput >= PL_regeol || ! FUNCA(nextchr)) { \
+ sayNO; \
+ } \
+ /* Matched a utf8-invariant, so don't have to worry about utf8 */ \
+ nextchr = UCHARAT(++locinput); \
+ break; \
+ case NNAMEA: \
+ if (locinput >= PL_regeol || FUNCA(nextchr)) { \
+ sayNO; \
+ } \
+ if (utf8_target) { \
+ locinput += PL_utf8skip[nextchr]; \
+ nextchr = UCHARAT(locinput); \
+ } \
+ else { \
+ nextchr = UCHARAT(++locinput); \
+ } \
+ break; \
+ /* Generate the non-locale cases */ \
+ _CCC_TRY_NONLOCALE(NAME, NNAME, FUNC, CLASS, STR)
+
+/* This is like CCC_TRY, but has an extra set of parameters for generating case
+ * statements to handle separate Unicode semantics nodes */
+#define CCC_TRY_U(NAME, NNAME, FUNC, \
+ NAMEL, NNAMEL, LCFUNC, LCFUNC_utf8, \
+ NAMEU, NNAMEU, FUNCU, \
+ NAMEA, NNAMEA, FUNCA, \
+ CLASS, STR) \
+ CCC_TRY(NAME, NNAME, FUNC, \
+ NAMEL, NNAMEL, LCFUNC, LCFUNC_utf8, \
+ NAMEA, NNAMEA, FUNCA, \
+ CLASS, STR) \
+ _CCC_TRY_NONLOCALE(NAMEU, NNAMEU, FUNCU, CLASS, STR)
+
+/* TODO: Combine JUMPABLE and HAS_TEXT to cache OP(rn) */
+
+/* for use after a quantifier and before an EXACT-like node -- japhy */
+/* it would be nice to rework regcomp.sym to generate this stuff. sigh
+ *
+ * NOTE that *nothing* that affects backtracking should be in here, specifically
+ * VERBS must NOT be included. JUMPABLE is used to determine if we can ignore a
+ * node that is in between two EXACT like nodes when ascertaining what the required
+ * "follow" character is. This should probably be moved to regex compile time
+ * although it may be done at run time beause of the REF possibility - more
+ * investigation required. -- demerphq
+*/
+#define JUMPABLE(rn) ( \
+ OP(rn) == OPEN || \
+ (OP(rn) == CLOSE && (!cur_eval || cur_eval->u.eval.close_paren != ARG(rn))) || \
+ OP(rn) == EVAL || \
+ OP(rn) == SUSPEND || OP(rn) == IFMATCH || \
+ OP(rn) == PLUS || OP(rn) == MINMOD || \
+ OP(rn) == KEEPS || \
+ (PL_regkind[OP(rn)] == CURLY && ARG1(rn) > 0) \
+)
+#define IS_EXACT(rn) (PL_regkind[OP(rn)] == EXACT)
+
+#define HAS_TEXT(rn) ( IS_EXACT(rn) || PL_regkind[OP(rn)] == REF )
+
+#if 0
+/* Currently these are only used when PL_regkind[OP(rn)] == EXACT so
+ we don't need this definition. */
+#define IS_TEXT(rn) ( OP(rn)==EXACT || OP(rn)==REF || OP(rn)==NREF )
+#define IS_TEXTF(rn) ( OP(rn)==EXACTFU || OP(rn)==EXACTFU_SS || OP(rn)==EXACTFU_TRICKYFOLD || OP(rn)==EXACTFA || OP(rn)==EXACTF || OP(rn)==REFF || OP(rn)==NREFF )
+#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL || OP(rn)==REFFL || OP(rn)==NREFFL )
+
+#else
+/* ... so we use this as its faster. */
+#define IS_TEXT(rn) ( OP(rn)==EXACT )
+#define IS_TEXTFU(rn) ( OP(rn)==EXACTFU || OP(rn)==EXACTFU_SS || OP(rn)==EXACTFU_TRICKYFOLD || OP(rn) == EXACTFA)
+#define IS_TEXTF(rn) ( OP(rn)==EXACTF )
+#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL )
+
+#endif
+
+/*
+ Search for mandatory following text node; for lookahead, the text must
+ follow but for lookbehind (rn->flags != 0) we skip to the next step.
+*/
+#define FIND_NEXT_IMPT(rn) STMT_START { \
+ while (JUMPABLE(rn)) { \
+ const OPCODE type = OP(rn); \
+ if (type == SUSPEND || PL_regkind[type] == CURLY) \
+ rn = NEXTOPER(NEXTOPER(rn)); \
+ else if (type == PLUS) \
+ rn = NEXTOPER(rn); \
+ else if (type == IFMATCH) \
+ rn = (rn->flags == 0) ? NEXTOPER(NEXTOPER(rn)) : rn + ARG(rn); \
+ else rn += NEXT_OFF(rn); \
+ } \
+} STMT_END
+
+
+static void restore_pos(pTHX_ void *arg);
+
+#define REGCP_PAREN_ELEMS 4
+#define REGCP_OTHER_ELEMS 5
+#define REGCP_FRAME_ELEMS 1
+/* REGCP_FRAME_ELEMS are not part of the REGCP_OTHER_ELEMS and
+ * are needed for the regexp context stack bookkeeping. */
+
+STATIC CHECKPOINT
+S_regcppush(pTHX_ I32 parenfloor)
+{
+ dVAR;
+ const int retval = PL_savestack_ix;
+ const int paren_elems_to_push = (PL_regsize - parenfloor) * REGCP_PAREN_ELEMS;
+ const UV total_elems = paren_elems_to_push + REGCP_OTHER_ELEMS;
+ const UV elems_shifted = total_elems << SAVE_TIGHT_SHIFT;
+ int p;
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ if (paren_elems_to_push < 0)
+ Perl_croak(aTHX_ "panic: paren_elems_to_push, %i < 0",
+ paren_elems_to_push);
+
+ if ((elems_shifted >> SAVE_TIGHT_SHIFT) != total_elems)
+ Perl_croak(aTHX_ "panic: paren_elems_to_push offset %"UVuf
+ " out of range (%lu-%ld)",
+ total_elems, (unsigned long)PL_regsize, (long)parenfloor);
+
+ SSGROW(total_elems + REGCP_FRAME_ELEMS);
+
+ for (p = PL_regsize; p > parenfloor; p--) {
+/* REGCP_PARENS_ELEMS are pushed per pairs of parentheses. */
+ SSPUSHINT(PL_regoffs[p].end);
+ SSPUSHINT(PL_regoffs[p].start);
+ SSPUSHPTR(PL_reg_start_tmp[p]);
+ SSPUSHINT(p);
+ DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
+ " saving \\%"UVuf" %"IVdf"(%"IVdf")..%"IVdf"\n",
+ (UV)p, (IV)PL_regoffs[p].start,
+ (IV)(PL_reg_start_tmp[p] - PL_bostr),
+ (IV)PL_regoffs[p].end
+ ));
+ }
+/* REGCP_OTHER_ELEMS are pushed in any case, parentheses or no. */
+ SSPUSHPTR(PL_regoffs);
+ SSPUSHINT(PL_regsize);
+ SSPUSHINT(*PL_reglastparen);
+ SSPUSHINT(*PL_reglastcloseparen);
+ SSPUSHPTR(PL_reginput);
+ SSPUSHUV(SAVEt_REGCONTEXT | elems_shifted); /* Magic cookie. */
+
+ return retval;
+}
+
+/* These are needed since we do not localize EVAL nodes: */
+#define REGCP_SET(cp) \
+ DEBUG_STATE_r( \
+ PerlIO_printf(Perl_debug_log, \
+ " Setting an EVAL scope, savestack=%"IVdf"\n", \
+ (IV)PL_savestack_ix)); \
+ cp = PL_savestack_ix
+
+#define REGCP_UNWIND(cp) \
+ DEBUG_STATE_r( \
+ if (cp != PL_savestack_ix) \
+ PerlIO_printf(Perl_debug_log, \
+ " Clearing an EVAL scope, savestack=%"IVdf"..%"IVdf"\n", \
+ (IV)(cp), (IV)PL_savestack_ix)); \
+ regcpblow(cp)
+
+STATIC char *
+S_regcppop(pTHX_ const regexp *rex)
+{
+ dVAR;
+ UV i;
+ char *input;
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_REGCPPOP;
+
+ /* Pop REGCP_OTHER_ELEMS before the parentheses loop starts. */
+ i = SSPOPUV;
+ assert((i & SAVE_MASK) == SAVEt_REGCONTEXT); /* Check that the magic cookie is there. */
+ i >>= SAVE_TIGHT_SHIFT; /* Parentheses elements to pop. */
+ input = (char *) SSPOPPTR;
+ *PL_reglastcloseparen = SSPOPINT;
+ *PL_reglastparen = SSPOPINT;
+ PL_regsize = SSPOPINT;
+ PL_regoffs=(regexp_paren_pair *) SSPOPPTR;
+
+ i -= REGCP_OTHER_ELEMS;
+ /* Now restore the parentheses context. */
+ for ( ; i > 0; i -= REGCP_PAREN_ELEMS) {
+ I32 tmps;
+ U32 paren = (U32)SSPOPINT;
+ PL_reg_start_tmp[paren] = (char *) SSPOPPTR;
+ PL_regoffs[paren].start = SSPOPINT;
+ tmps = SSPOPINT;
+ if (paren <= *PL_reglastparen)
+ PL_regoffs[paren].end = tmps;
+ DEBUG_BUFFERS_r(
+ PerlIO_printf(Perl_debug_log,
+ " restoring \\%"UVuf" to %"IVdf"(%"IVdf")..%"IVdf"%s\n",
+ (UV)paren, (IV)PL_regoffs[paren].start,
+ (IV)(PL_reg_start_tmp[paren] - PL_bostr),
+ (IV)PL_regoffs[paren].end,
+ (paren > *PL_reglastparen ? "(no)" : ""));
+ );
+ }
+ DEBUG_BUFFERS_r(
+ if (*PL_reglastparen + 1 <= rex->nparens) {
+ PerlIO_printf(Perl_debug_log,
+ " restoring \\%"IVdf"..\\%"IVdf" to undef\n",
+ (IV)(*PL_reglastparen + 1), (IV)rex->nparens);
+ }
+ );
+#if 1
+ /* It would seem that the similar code in regtry()
+ * already takes care of this, and in fact it is in
+ * a better location to since this code can #if 0-ed out
+ * but the code in regtry() is needed or otherwise tests
+ * requiring null fields (pat.t#187 and split.t#{13,14}
+ * (as of patchlevel 7877) will fail. Then again,
+ * this code seems to be necessary or otherwise
+ * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
+ * --jhi updated by dapm */
+ for (i = *PL_reglastparen + 1; i <= rex->nparens; i++) {
+ if (i > PL_regsize)
+ PL_regoffs[i].start = -1;
+ PL_regoffs[i].end = -1;
+ }
+#endif
+ return input;
+}
+
+#define regcpblow(cp) LEAVE_SCOPE(cp) /* Ignores regcppush()ed data. */
+
+/*
+ * pregexec and friends
+ */
+
+#ifndef PERL_IN_XSUB_RE
+/*
+ - pregexec - match a regexp against a string
+ */
+I32
+Perl_pregexec(pTHX_ REGEXP * const prog, char* stringarg, register char *strend,
+ char *strbeg, I32 minend, SV *screamer, U32 nosave)
+/* strend: pointer to null at end of string */
+/* strbeg: real beginning of string */
+/* minend: end of match must be >=minend after stringarg. */
+/* nosave: For optimizations. */
+{
+ PERL_ARGS_ASSERT_PREGEXEC;
+
+ return
+ regexec_flags(prog, stringarg, strend, strbeg, minend, screamer, NULL,
+ nosave ? 0 : REXEC_COPY_STR);
+}
+#endif
+
+/*
+ * Need to implement the following flags for reg_anch:
+ *
+ * USE_INTUIT_NOML - Useful to call re_intuit_start() first
+ * USE_INTUIT_ML
+ * INTUIT_AUTORITATIVE_NOML - Can trust a positive answer
+ * INTUIT_AUTORITATIVE_ML
+ * INTUIT_ONCE_NOML - Intuit can match in one location only.
+ * INTUIT_ONCE_ML
+ *
+ * Another flag for this function: SECOND_TIME (so that float substrs
+ * with giant delta may be not rechecked).
+ */
+
+/* Assumptions: if ANCH_GPOS, then strpos is anchored. XXXX Check GPOS logic */
+
+/* If SCREAM, then SvPVX_const(sv) should be compatible with strpos and strend.
+ Otherwise, only SvCUR(sv) is used to get strbeg. */
+
+/* XXXX We assume that strpos is strbeg unless sv. */
+
+/* XXXX Some places assume that there is a fixed substring.
+ An update may be needed if optimizer marks as "INTUITable"
+ RExen without fixed substrings. Similarly, it is assumed that
+ lengths of all the strings are no more than minlen, thus they
+ cannot come from lookahead.
+ (Or minlen should take into account lookahead.)
+ NOTE: Some of this comment is not correct. minlen does now take account
+ of lookahead/behind. Further research is required. -- demerphq
+
+*/
+
+/* A failure to find a constant substring means that there is no need to make
+ an expensive call to REx engine, thus we celebrate a failure. Similarly,
+ finding a substring too deep into the string means that less calls to
+ regtry() should be needed.
+
+ REx compiler's optimizer found 4 possible hints:
+ a) Anchored substring;
+ b) Fixed substring;
+ c) Whether we are anchored (beginning-of-line or \G);
+ d) First node (of those at offset 0) which may distinguish positions;
+ We use a)b)d) and multiline-part of c), and try to find a position in the
+ string which does not contradict any of them.
+ */
+
+/* Most of decisions we do here should have been done at compile time.
+ The nodes of the REx which we used for the search should have been
+ deleted from the finite automaton. */
+
+char *
+Perl_re_intuit_start(pTHX_ REGEXP * const rx, SV *sv, char *strpos,
+ char *strend, const U32 flags, re_scream_pos_data *data)
+{
+ dVAR;
+ struct regexp *const prog = (struct regexp *)SvANY(rx);
+ register I32 start_shift = 0;
+ /* Should be nonnegative! */
+ register I32 end_shift = 0;
+ register char *s;
+ register SV *check;
+ char *strbeg;
+ char *t;
+ const bool utf8_target = (sv && SvUTF8(sv)) ? 1 : 0; /* if no sv we have to assume bytes */
+ I32 ml_anch;
+ register char *other_last = NULL; /* other substr checked before this */
+ char *check_at = NULL; /* check substr found at this pos */
+ const I32 multiline = prog->extflags & RXf_PMf_MULTILINE;
+ RXi_GET_DECL(prog,progi);
+#ifdef DEBUGGING
+ const char * const i_strpos = strpos;
+#endif
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_RE_INTUIT_START;
+
+ RX_MATCH_UTF8_set(rx,utf8_target);
+
+ if (RX_UTF8(rx)) {
+ PL_reg_flags |= RF_utf8;
+ }
+ DEBUG_EXECUTE_r(
+ debug_start_match(rx, utf8_target, strpos, strend,
+ sv ? "Guessing start of match in sv for"
+ : "Guessing start of match in string for");
+ );
+
+ /* CHR_DIST() would be more correct here but it makes things slow. */
+ if (prog->minlen > strend - strpos) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "String too short... [re_intuit_start]\n"));
+ goto fail;
+ }
+
+ strbeg = (sv && SvPOK(sv)) ? strend - SvCUR(sv) : strpos;
+ PL_regeol = strend;
+ if (utf8_target) {
+ if (!prog->check_utf8 && prog->check_substr)
+ to_utf8_substr(prog);
+ check = prog->check_utf8;
+ } else {
+ if (!prog->check_substr && prog->check_utf8)
+ to_byte_substr(prog);
+ check = prog->check_substr;
+ }
+ if (check == &PL_sv_undef) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "Non-utf8 string cannot match utf8 check string\n"));
+ goto fail;
+ }
+ if (prog->extflags & RXf_ANCH) { /* Match at beg-of-str or after \n */
+ ml_anch = !( (prog->extflags & RXf_ANCH_SINGLE)
+ || ( (prog->extflags & RXf_ANCH_BOL)
+ && !multiline ) ); /* Check after \n? */
+
+ if (!ml_anch) {
+ if ( !(prog->extflags & RXf_ANCH_GPOS) /* Checked by the caller */
+ && !(prog->intflags & PREGf_IMPLICIT) /* not a real BOL */
+ /* SvCUR is not set on references: SvRV and SvPVX_const overlap */
+ && sv && !SvROK(sv)
+ && (strpos != strbeg)) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Not at start...\n"));
+ goto fail;
+ }
+ if (prog->check_offset_min == prog->check_offset_max &&
+ !(prog->extflags & RXf_CANY_SEEN)) {
+ /* Substring at constant offset from beg-of-str... */
+ I32 slen;
+
+ s = HOP3c(strpos, prog->check_offset_min, strend);
+
+ if (SvTAIL(check)) {
+ slen = SvCUR(check); /* >= 1 */
+
+ if ( strend - s > slen || strend - s < slen - 1
+ || (strend - s == slen && strend[-1] != '\n')) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "String too long...\n"));
+ goto fail_finish;
+ }
+ /* Now should match s[0..slen-2] */
+ slen--;
+ if (slen && (*SvPVX_const(check) != *s
+ || (slen > 1
+ && memNE(SvPVX_const(check), s, slen)))) {
+ report_neq:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "String not equal...\n"));
+ goto fail_finish;
+ }
+ }
+ else if (*SvPVX_const(check) != *s
+ || ((slen = SvCUR(check)) > 1
+ && memNE(SvPVX_const(check), s, slen)))
+ goto report_neq;
+ check_at = s;
+ goto success_at_start;
+ }
+ }
+ /* Match is anchored, but substr is not anchored wrt beg-of-str. */
+ s = strpos;
+ start_shift = prog->check_offset_min; /* okay to underestimate on CC */
+ end_shift = prog->check_end_shift;
+
+ if (!ml_anch) {
+ const I32 end = prog->check_offset_max + CHR_SVLEN(check)
+ - (SvTAIL(check) != 0);
+ const I32 eshift = CHR_DIST((U8*)strend, (U8*)s) - end;
+
+ if (end_shift < eshift)
+ end_shift = eshift;
+ }
+ }
+ else { /* Can match at random position */
+ ml_anch = 0;
+ s = strpos;
+ start_shift = prog->check_offset_min; /* okay to underestimate on CC */
+ end_shift = prog->check_end_shift;
+
+ /* end shift should be non negative here */
+ }
+
+#ifdef QDEBUGGING /* 7/99: reports of failure (with the older version) */
+ if (end_shift < 0)
+ Perl_croak(aTHX_ "panic: end_shift: %"IVdf" pattern:\n%s\n ",
+ (IV)end_shift, RX_PRECOMP(prog));
+#endif
+
+ restart:
+ /* Find a possible match in the region s..strend by looking for
+ the "check" substring in the region corrected by start/end_shift. */
+
+ {
+ I32 srch_start_shift = start_shift;
+ I32 srch_end_shift = end_shift;
+ if (srch_start_shift < 0 && strbeg - s > srch_start_shift) {
+ srch_end_shift -= ((strbeg - s) - srch_start_shift);
+ srch_start_shift = strbeg - s;
+ }
+ DEBUG_OPTIMISE_MORE_r({
+ PerlIO_printf(Perl_debug_log, "Check offset min: %"IVdf" Start shift: %"IVdf" End shift %"IVdf" Real End Shift: %"IVdf"\n",
+ (IV)prog->check_offset_min,
+ (IV)srch_start_shift,
+ (IV)srch_end_shift,
+ (IV)prog->check_end_shift);
+ });
+
+ if ((flags & REXEC_SCREAM) && SvSCREAM(sv)) {
+ I32 p = -1; /* Internal iterator of scream. */
+ I32 * const pp = data ? data->scream_pos : &p;
+ const MAGIC *mg;
+ bool found = FALSE;
+
+ assert(SvMAGICAL(sv));
+ mg = mg_find(sv, PERL_MAGIC_study);
+ assert(mg);
+
+ if (mg->mg_private == 1) {
+ found = ((U8 *)mg->mg_ptr)[BmRARE(check)] != (U8)~0;
+ } else if (mg->mg_private == 2) {
+ found = ((U16 *)mg->mg_ptr)[BmRARE(check)] != (U16)~0;
+ } else {
+ assert (mg->mg_private == 4);
+ found = ((U32 *)mg->mg_ptr)[BmRARE(check)] != (U32)~0;
+ }
+
+ if (found
+ || ( BmRARE(check) == '\n'
+ && (BmPREVIOUS(check) == SvCUR(check) - 1)
+ && SvTAIL(check) ))
+ s = screaminstr(sv, check,
+ srch_start_shift + (s - strbeg), srch_end_shift, pp, 0);
+ else
+ goto fail_finish;
+ /* we may be pointing at the wrong string */
+ if (s && RXp_MATCH_COPIED(prog))
+ s = strbeg + (s - SvPVX_const(sv));
+ if (data)
+ *data->scream_olds = s;
+ }
+ else {
+ U8* start_point;
+ U8* end_point;
+ if (prog->extflags & RXf_CANY_SEEN) {
+ start_point= (U8*)(s + srch_start_shift);
+ end_point= (U8*)(strend - srch_end_shift);
+ } else {
+ start_point= HOP3(s, srch_start_shift, srch_start_shift < 0 ? strbeg : strend);
+ end_point= HOP3(strend, -srch_end_shift, strbeg);
+ }
+ DEBUG_OPTIMISE_MORE_r({
+ PerlIO_printf(Perl_debug_log, "fbm_instr len=%d str=<%.*s>\n",
+ (int)(end_point - start_point),
+ (int)(end_point - start_point) > 20 ? 20 : (int)(end_point - start_point),
+ start_point);
+ });
+
+ s = fbm_instr( start_point, end_point,
+ check, multiline ? FBMrf_MULTILINE : 0);
+ }
+ }
+ /* Update the count-of-usability, remove useless subpatterns,
+ unshift s. */
+
+ DEBUG_EXECUTE_r({
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(check), RE_SV_DUMPLEN(check), 30);
+ PerlIO_printf(Perl_debug_log, "%s %s substr %s%s%s",
+ (s ? "Found" : "Did not find"),
+ (check == (utf8_target ? prog->anchored_utf8 : prog->anchored_substr)
+ ? "anchored" : "floating"),
+ quoted,
+ RE_SV_TAIL(check),
+ (s ? " at offset " : "...\n") );
+ });
+
+ if (!s)
+ goto fail_finish;
+ /* Finish the diagnostic message */
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%ld...\n", (long)(s - i_strpos)) );
+
+ /* XXX dmq: first branch is for positive lookbehind...
+ Our check string is offset from the beginning of the pattern.
+ So we need to do any stclass tests offset forward from that
+ point. I think. :-(
+ */
+
+
+
+ check_at=s;
+
+
+ /* Got a candidate. Check MBOL anchoring, and the *other* substr.
+ Start with the other substr.
+ XXXX no SCREAM optimization yet - and a very coarse implementation
+ XXXX /ttx+/ results in anchored="ttx", floating="x". floating will
+ *always* match. Probably should be marked during compile...
+ Probably it is right to do no SCREAM here...
+ */
+
+ if (utf8_target ? (prog->float_utf8 && prog->anchored_utf8)
+ : (prog->float_substr && prog->anchored_substr))
+ {
+ /* Take into account the "other" substring. */
+ /* XXXX May be hopelessly wrong for UTF... */
+ if (!other_last)
+ other_last = strpos;
+ if (check == (utf8_target ? prog->float_utf8 : prog->float_substr)) {
+ do_other_anchored:
+ {
+ char * const last = HOP3c(s, -start_shift, strbeg);
+ char *last1, *last2;
+ char * const saved_s = s;
+ SV* must;
+
+ t = s - prog->check_offset_max;
+ if (s - strpos > prog->check_offset_max /* signed-corrected t > strpos */
+ && (!utf8_target
+ || ((t = (char*)reghopmaybe3((U8*)s, -(prog->check_offset_max), (U8*)strpos))
+ && t > strpos)))
+ NOOP;
+ else
+ t = strpos;
+ t = HOP3c(t, prog->anchored_offset, strend);
+ if (t < other_last) /* These positions already checked */
+ t = other_last;
+ last2 = last1 = HOP3c(strend, -prog->minlen, strbeg);
+ if (last < last1)
+ last1 = last;
+ /* XXXX It is not documented what units *_offsets are in.
+ We assume bytes, but this is clearly wrong.
+ Meaning this code needs to be carefully reviewed for errors.
+ dmq.
+ */
+
+ /* On end-of-str: see comment below. */
+ must = utf8_target ? prog->anchored_utf8 : prog->anchored_substr;
+ if (must == &PL_sv_undef) {
+ s = (char*)NULL;
+ DEBUG_r(must = prog->anchored_utf8); /* for debug */
+ }
+ else
+ s = fbm_instr(
+ (unsigned char*)t,
+ HOP3(HOP3(last1, prog->anchored_offset, strend)
+ + SvCUR(must), -(SvTAIL(must)!=0), strbeg),
+ must,
+ multiline ? FBMrf_MULTILINE : 0
+ );
+ DEBUG_EXECUTE_r({
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
+ PerlIO_printf(Perl_debug_log, "%s anchored substr %s%s",
+ (s ? "Found" : "Contradicts"),
+ quoted, RE_SV_TAIL(must));
+ });
+
+
+ if (!s) {
+ if (last1 >= last2) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", giving up...\n"));
+ goto fail_finish;
+ }
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", trying floating at offset %ld...\n",
+ (long)(HOP3c(saved_s, 1, strend) - i_strpos)));
+ other_last = HOP3c(last1, prog->anchored_offset+1, strend);
+ s = HOP3c(last, 1, strend);
+ goto restart;
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, " at offset %ld...\n",
+ (long)(s - i_strpos)));
+ t = HOP3c(s, -prog->anchored_offset, strbeg);
+ other_last = HOP3c(s, 1, strend);
+ s = saved_s;
+ if (t == strpos)
+ goto try_at_start;
+ goto try_at_offset;
+ }
+ }
+ }
+ else { /* Take into account the floating substring. */
+ char *last, *last1;
+ char * const saved_s = s;
+ SV* must;
+
+ t = HOP3c(s, -start_shift, strbeg);
+ last1 = last =
+ HOP3c(strend, -prog->minlen + prog->float_min_offset, strbeg);
+ if (CHR_DIST((U8*)last, (U8*)t) > prog->float_max_offset)
+ last = HOP3c(t, prog->float_max_offset, strend);
+ s = HOP3c(t, prog->float_min_offset, strend);
+ if (s < other_last)
+ s = other_last;
+ /* XXXX It is not documented what units *_offsets are in. Assume bytes. */
+ must = utf8_target ? prog->float_utf8 : prog->float_substr;
+ /* fbm_instr() takes into account exact value of end-of-str
+ if the check is SvTAIL(ed). Since false positives are OK,
+ and end-of-str is not later than strend we are OK. */
+ if (must == &PL_sv_undef) {
+ s = (char*)NULL;
+ DEBUG_r(must = prog->float_utf8); /* for debug message */
+ }
+ else
+ s = fbm_instr((unsigned char*)s,
+ (unsigned char*)last + SvCUR(must)
+ - (SvTAIL(must)!=0),
+ must, multiline ? FBMrf_MULTILINE : 0);
+ DEBUG_EXECUTE_r({
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
+ PerlIO_printf(Perl_debug_log, "%s floating substr %s%s",
+ (s ? "Found" : "Contradicts"),
+ quoted, RE_SV_TAIL(must));
+ });
+ if (!s) {
+ if (last1 == last) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", giving up...\n"));
+ goto fail_finish;
+ }
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", trying anchored starting at offset %ld...\n",
+ (long)(saved_s + 1 - i_strpos)));
+ other_last = last;
+ s = HOP3c(t, 1, strend);
+ goto restart;
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, " at offset %ld...\n",
+ (long)(s - i_strpos)));
+ other_last = s; /* Fix this later. --Hugo */
+ s = saved_s;
+ if (t == strpos)
+ goto try_at_start;
+ goto try_at_offset;
+ }
+ }
+ }
+
+
+ t= (char*)HOP3( s, -prog->check_offset_max, (prog->check_offset_max<0) ? strend : strpos);
+
+ DEBUG_OPTIMISE_MORE_r(
+ PerlIO_printf(Perl_debug_log,
+ "Check offset min:%"IVdf" max:%"IVdf" S:%"IVdf" t:%"IVdf" D:%"IVdf" end:%"IVdf"\n",
+ (IV)prog->check_offset_min,
+ (IV)prog->check_offset_max,
+ (IV)(s-strpos),
+ (IV)(t-strpos),
+ (IV)(t-s),
+ (IV)(strend-strpos)
+ )
+ );
+
+ if (s - strpos > prog->check_offset_max /* signed-corrected t > strpos */
+ && (!utf8_target
+ || ((t = (char*)reghopmaybe3((U8*)s, -prog->check_offset_max, (U8*) ((prog->check_offset_max<0) ? strend : strpos)))
+ && t > strpos)))
+ {
+ /* Fixed substring is found far enough so that the match
+ cannot start at strpos. */
+ try_at_offset:
+ if (ml_anch && t[-1] != '\n') {
+ /* Eventually fbm_*() should handle this, but often
+ anchored_offset is not 0, so this check will not be wasted. */
+ /* XXXX In the code below we prefer to look for "^" even in
+ presence of anchored substrings. And we search even
+ beyond the found float position. These pessimizations
+ are historical artefacts only. */
+ find_anchor:
+ while (t < strend - prog->minlen) {
+ if (*t == '\n') {
+ if (t < check_at - prog->check_offset_min) {
+ if (utf8_target ? prog->anchored_utf8 : prog->anchored_substr) {
+ /* Since we moved from the found position,
+ we definitely contradict the found anchored
+ substr. Due to the above check we do not
+ contradict "check" substr.
+ Thus we can arrive here only if check substr
+ is float. Redo checking for "other"=="fixed".
+ */
+ strpos = t + 1;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m at offset %ld, rescanning for anchored from offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(strpos - i_strpos), (long)(strpos - i_strpos + prog->anchored_offset)));
+ goto do_other_anchored;
+ }
+ /* We don't contradict the found floating substring. */
+ /* XXXX Why not check for STCLASS? */
+ s = t + 1;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m at offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(s - i_strpos)));
+ goto set_useful;
+ }
+ /* Position contradicts check-string */
+ /* XXXX probably better to look for check-string
+ than for "\n", so one should lower the limit for t? */
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m, restarting lookup for check-string at offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(t + 1 - i_strpos)));
+ other_last = strpos = s = t + 1;
+ goto restart;
+ }
+ t++;
+ }
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Did not find /%s^%s/m...\n",
+ PL_colors[0], PL_colors[1]));
+ goto fail_finish;
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Starting position does not contradict /%s^%s/m...\n",
+ PL_colors[0], PL_colors[1]));
+ }
+ s = t;
+ set_useful:
+ ++BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr); /* hooray/5 */
+ }
+ else {
+ /* The found string does not prohibit matching at strpos,
+ - no optimization of calling REx engine can be performed,
+ unless it was an MBOL and we are not after MBOL,
+ or a future STCLASS check will fail this. */
+ try_at_start:
+ /* Even in this situation we may use MBOL flag if strpos is offset
+ wrt the start of the string. */
+ if (ml_anch && sv && !SvROK(sv) /* See prev comment on SvROK */
+ && (strpos != strbeg) && strpos[-1] != '\n'
+ /* May be due to an implicit anchor of m{.*foo} */
+ && !(prog->intflags & PREGf_IMPLICIT))
+ {
+ t = strpos;
+ goto find_anchor;
+ }
+ DEBUG_EXECUTE_r( if (ml_anch)
+ PerlIO_printf(Perl_debug_log, "Position at offset %ld does not contradict /%s^%s/m...\n",
+ (long)(strpos - i_strpos), PL_colors[0], PL_colors[1]);
+ );
+ success_at_start:
+ if (!(prog->intflags & PREGf_NAUGHTY) /* XXXX If strpos moved? */
+ && (utf8_target ? (
+ prog->check_utf8 /* Could be deleted already */
+ && --BmUSEFUL(prog->check_utf8) < 0
+ && (prog->check_utf8 == prog->float_utf8)
+ ) : (
+ prog->check_substr /* Could be deleted already */
+ && --BmUSEFUL(prog->check_substr) < 0
+ && (prog->check_substr == prog->float_substr)
+ )))
+ {
+ /* If flags & SOMETHING - do not do it many times on the same match */
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "... Disabling check substring...\n"));
+ /* XXX Does the destruction order has to change with utf8_target? */
+ SvREFCNT_dec(utf8_target ? prog->check_utf8 : prog->check_substr);
+ SvREFCNT_dec(utf8_target ? prog->check_substr : prog->check_utf8);
+ prog->check_substr = prog->check_utf8 = NULL; /* disable */
+ prog->float_substr = prog->float_utf8 = NULL; /* clear */
+ check = NULL; /* abort */
+ s = strpos;
+ /* XXXX If the check string was an implicit check MBOL, then we need to unset the relevant flag
+ see http://bugs.activestate.com/show_bug.cgi?id=87173 */
+ if (prog->intflags & PREGf_IMPLICIT)
+ prog->extflags &= ~RXf_ANCH_MBOL;
+ /* XXXX This is a remnant of the old implementation. It
+ looks wasteful, since now INTUIT can use many
+ other heuristics. */
+ prog->extflags &= ~RXf_USE_INTUIT;
+ /* XXXX What other flags might need to be cleared in this branch? */
+ }
+ else
+ s = strpos;
+ }
+
+ /* Last resort... */
+ /* XXXX BmUSEFUL already changed, maybe multiple change is meaningful... */
+ /* trie stclasses are too expensive to use here, we are better off to
+ leave it to regmatch itself */
+ if (progi->regstclass && PL_regkind[OP(progi->regstclass)]!=TRIE) {
+ /* minlen == 0 is possible if regstclass is \b or \B,
+ and the fixed substr is ''$.
+ Since minlen is already taken into account, s+1 is before strend;
+ accidentally, minlen >= 1 guaranties no false positives at s + 1
+ even for \b or \B. But (minlen? 1 : 0) below assumes that
+ regstclass does not come from lookahead... */
+ /* If regstclass takes bytelength more than 1: If charlength==1, OK.
+ This leaves EXACTF-ish only, which are dealt with in find_byclass(). */
+ const U8* const str = (U8*)STRING(progi->regstclass);
+ const int cl_l = (PL_regkind[OP(progi->regstclass)] == EXACT
+ ? CHR_DIST(str+STR_LEN(progi->regstclass), str)
+ : 1);
+ char * endpos;
+ if (prog->anchored_substr || prog->anchored_utf8 || ml_anch)
+ endpos= HOP3c(s, (prog->minlen ? cl_l : 0), strend);
+ else if (prog->float_substr || prog->float_utf8)
+ endpos= HOP3c(HOP3c(check_at, -start_shift, strbeg), cl_l, strend);
+ else
+ endpos= strend;
+
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "start_shift: %"IVdf" check_at: %"IVdf" s: %"IVdf" endpos: %"IVdf"\n",
+ (IV)start_shift, (IV)(check_at - strbeg), (IV)(s - strbeg), (IV)(endpos - strbeg)));
+
+ t = s;
+ s = find_byclass(prog, progi->regstclass, s, endpos, NULL);
+ if (!s) {
+#ifdef DEBUGGING
+ const char *what = NULL;
+#endif
+ if (endpos == strend) {
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Could not match STCLASS...\n") );
+ goto fail;
+ }
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "This position contradicts STCLASS...\n") );
+ if ((prog->extflags & RXf_ANCH) && !ml_anch)
+ goto fail;
+ /* Contradict one of substrings */
+ if (prog->anchored_substr || prog->anchored_utf8) {
+ if ((utf8_target ? prog->anchored_utf8 : prog->anchored_substr) == check) {
+ DEBUG_EXECUTE_r( what = "anchored" );
+ hop_and_restart:
+ s = HOP3c(t, 1, strend);
+ if (s + start_shift + end_shift > strend) {
+ /* XXXX Should be taken into account earlier? */
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Could not match STCLASS...\n") );
+ goto fail;
+ }
+ if (!check)
+ goto giveup;
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Looking for %s substr starting at offset %ld...\n",
+ what, (long)(s + start_shift - i_strpos)) );
+ goto restart;
+ }
+ /* Have both, check_string is floating */
+ if (t + start_shift >= check_at) /* Contradicts floating=check */
+ goto retry_floating_check;
+ /* Recheck anchored substring, but not floating... */
+ s = check_at;
+ if (!check)
+ goto giveup;
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Looking for anchored substr starting at offset %ld...\n",
+ (long)(other_last - i_strpos)) );
+ goto do_other_anchored;
+ }
+ /* Another way we could have checked stclass at the
+ current position only: */
+ if (ml_anch) {
+ s = t = t + 1;
+ if (!check)
+ goto giveup;
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Looking for /%s^%s/m starting at offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(t - i_strpos)) );
+ goto try_at_offset;
+ }
+ if (!(utf8_target ? prog->float_utf8 : prog->float_substr)) /* Could have been deleted */
+ goto fail;
+ /* Check is floating substring. */
+ retry_floating_check:
+ t = check_at - start_shift;
+ DEBUG_EXECUTE_r( what = "floating" );
+ goto hop_and_restart;
+ }
+ if (t != s) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "By STCLASS: moving %ld --> %ld\n",
+ (long)(t - i_strpos), (long)(s - i_strpos))
+ );
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "Does not contradict STCLASS...\n");
+ );
+ }
+ }
+ giveup:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%s%s:%s match at offset %ld\n",
+ PL_colors[4], (check ? "Guessed" : "Giving up"),
+ PL_colors[5], (long)(s - i_strpos)) );
+ return s;
+
+ fail_finish: /* Substring not found */
+ if (prog->check_substr || prog->check_utf8) /* could be removed already */
+ BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr) += 5; /* hooray */
+ fail:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch rejected by optimizer%s\n",
+ PL_colors[4], PL_colors[5]));
+ return NULL;
+}
+
+#define DECL_TRIE_TYPE(scan) \
+ const enum { trie_plain, trie_utf8, trie_utf8_fold, trie_latin_utf8_fold } \
+ trie_type = ((scan->flags == EXACT) \
+ ? (utf8_target ? trie_utf8 : trie_plain) \
+ : (utf8_target ? trie_utf8_fold : trie_latin_utf8_fold))
+
+#define REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc, uscan, len, \
+uvc, charid, foldlen, foldbuf, uniflags) STMT_START { \
+ STRLEN skiplen; \
+ switch (trie_type) { \
+ case trie_utf8_fold: \
+ if ( foldlen>0 ) { \
+ uvc = utf8n_to_uvuni( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
+ foldlen -= len; \
+ uscan += len; \
+ len=0; \
+ } else { \
+ uvc = to_utf8_fold( (const U8*) uc, foldbuf, &foldlen ); \
+ len = UTF8SKIP(uc); \
+ skiplen = UNISKIP( uvc ); \
+ foldlen -= skiplen; \
+ uscan = foldbuf + skiplen; \
+ } \
+ break; \
+ case trie_latin_utf8_fold: \
+ if ( foldlen>0 ) { \
+ uvc = utf8n_to_uvuni( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
+ foldlen -= len; \
+ uscan += len; \
+ len=0; \
+ } else { \
+ len = 1; \
+ uvc = _to_fold_latin1( (U8) *uc, foldbuf, &foldlen, 1); \
+ skiplen = UNISKIP( uvc ); \
+ foldlen -= skiplen; \
+ uscan = foldbuf + skiplen; \
+ } \
+ break; \
+ case trie_utf8: \
+ uvc = utf8n_to_uvuni( (const U8*) uc, UTF8_MAXLEN, &len, uniflags ); \
+ break; \
+ case trie_plain: \
+ uvc = (UV)*uc; \
+ len = 1; \
+ } \
+ if (uvc < 256) { \
+ charid = trie->charmap[ uvc ]; \
+ } \
+ else { \
+ charid = 0; \
+ if (widecharmap) { \
+ SV** const svpp = hv_fetch(widecharmap, \
+ (char*)&uvc, sizeof(UV), 0); \
+ if (svpp) \
+ charid = (U16)SvIV(*svpp); \
+ } \
+ } \
+} STMT_END
+
+#define REXEC_FBC_EXACTISH_SCAN(CoNd) \
+STMT_START { \
+ while (s <= e) { \
+ if ( (CoNd) \
+ && (ln == 1 || folder(s, pat_string, ln)) \
+ && (!reginfo || regtry(reginfo, &s)) ) \
+ goto got_it; \
+ s++; \
+ } \
+} STMT_END
+
+#define REXEC_FBC_UTF8_SCAN(CoDe) \
+STMT_START { \
+ while (s + (uskip = UTF8SKIP(s)) <= strend) { \
+ CoDe \
+ s += uskip; \
+ } \
+} STMT_END
+
+#define REXEC_FBC_SCAN(CoDe) \
+STMT_START { \
+ while (s < strend) { \
+ CoDe \
+ s++; \
+ } \
+} STMT_END
+
+#define REXEC_FBC_UTF8_CLASS_SCAN(CoNd) \
+REXEC_FBC_UTF8_SCAN( \
+ if (CoNd) { \
+ if (tmp && (!reginfo || regtry(reginfo, &s))) \
+ goto got_it; \
+ else \
+ tmp = doevery; \
+ } \
+ else \
+ tmp = 1; \
+)
+
+#define REXEC_FBC_CLASS_SCAN(CoNd) \
+REXEC_FBC_SCAN( \
+ if (CoNd) { \
+ if (tmp && (!reginfo || regtry(reginfo, &s))) \
+ goto got_it; \
+ else \
+ tmp = doevery; \
+ } \
+ else \
+ tmp = 1; \
+)
+
+#define REXEC_FBC_TRYIT \
+if ((!reginfo || regtry(reginfo, &s))) \
+ goto got_it
+
+#define REXEC_FBC_CSCAN(CoNdUtF8,CoNd) \
+ if (utf8_target) { \
+ REXEC_FBC_UTF8_CLASS_SCAN(CoNdUtF8); \
+ } \
+ else { \
+ REXEC_FBC_CLASS_SCAN(CoNd); \
+ }
+
+#define REXEC_FBC_CSCAN_PRELOAD(UtFpReLoAd,CoNdUtF8,CoNd) \
+ if (utf8_target) { \
+ UtFpReLoAd; \
+ REXEC_FBC_UTF8_CLASS_SCAN(CoNdUtF8); \
+ } \
+ else { \
+ REXEC_FBC_CLASS_SCAN(CoNd); \
+ }
+
+#define REXEC_FBC_CSCAN_TAINT(CoNdUtF8,CoNd) \
+ PL_reg_flags |= RF_tainted; \
+ if (utf8_target) { \
+ REXEC_FBC_UTF8_CLASS_SCAN(CoNdUtF8); \
+ } \
+ else { \
+ REXEC_FBC_CLASS_SCAN(CoNd); \
+ }
+
+#define DUMP_EXEC_POS(li,s,doutf8) \
+ dump_exec_pos(li,s,(PL_regeol),(PL_bostr),(PL_reg_starttry),doutf8)
+
+
+#define UTF8_NOLOAD(TEST_NON_UTF8, IF_SUCCESS, IF_FAIL) \
+ tmp = (s != PL_bostr) ? UCHARAT(s - 1) : '\n'; \
+ tmp = TEST_NON_UTF8(tmp); \
+ REXEC_FBC_UTF8_SCAN( \
+ if (tmp == ! TEST_NON_UTF8((U8) *s)) { \
+ tmp = !tmp; \
+ IF_SUCCESS; \
+ } \
+ else { \
+ IF_FAIL; \
+ } \
+ ); \
+
+#define UTF8_LOAD(TeSt1_UtF8, TeSt2_UtF8, IF_SUCCESS, IF_FAIL) \
+ if (s == PL_bostr) { \
+ tmp = '\n'; \
+ } \
+ else { \
+ U8 * const r = reghop3((U8*)s, -1, (U8*)PL_bostr); \
+ tmp = utf8n_to_uvchr(r, UTF8SKIP(r), 0, UTF8_ALLOW_DEFAULT); \
+ } \
+ tmp = TeSt1_UtF8; \
+ LOAD_UTF8_CHARCLASS_ALNUM(); \
+ REXEC_FBC_UTF8_SCAN( \
+ if (tmp == ! (TeSt2_UtF8)) { \
+ tmp = !tmp; \
+ IF_SUCCESS; \
+ } \
+ else { \
+ IF_FAIL; \
+ } \
+ ); \
+
+/* The only difference between the BOUND and NBOUND cases is that
+ * REXEC_FBC_TRYIT is called when matched in BOUND, and when non-matched in
+ * NBOUND. This is accomplished by passing it in either the if or else clause,
+ * with the other one being empty */
+#define FBC_BOUND(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_LOAD(TEST1_UTF8, TEST2_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER), TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)
+
+#define FBC_BOUND_NOLOAD(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_NOLOAD(TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER), TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)
+
+#define FBC_NBOUND(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_LOAD(TEST1_UTF8, TEST2_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT), TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)
+
+#define FBC_NBOUND_NOLOAD(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_NOLOAD(TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT), TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)
+
+
+/* Common to the BOUND and NBOUND cases. Unfortunately the UTF8 tests need to
+ * be passed in completely with the variable name being tested, which isn't
+ * such a clean interface, but this is easier to read than it was before. We
+ * are looking for the boundary (or non-boundary between a word and non-word
+ * character. The utf8 and non-utf8 cases have the same logic, but the details
+ * must be different. Find the "wordness" of the character just prior to this
+ * one, and compare it with the wordness of this one. If they differ, we have
+ * a boundary. At the beginning of the string, pretend that the previous
+ * character was a new-line */
+#define FBC_BOUND_COMMON(UTF8_CODE, TEST_NON_UTF8, IF_SUCCESS, IF_FAIL) \
+ if (utf8_target) { \
+ UTF8_CODE \
+ } \
+ else { /* Not utf8 */ \
+ tmp = (s != PL_bostr) ? UCHARAT(s - 1) : '\n'; \
+ tmp = TEST_NON_UTF8(tmp); \
+ REXEC_FBC_SCAN( \
+ if (tmp == ! TEST_NON_UTF8((U8) *s)) { \
+ tmp = !tmp; \
+ IF_SUCCESS; \
+ } \
+ else { \
+ IF_FAIL; \
+ } \
+ ); \
+ } \
+ if ((!prog->minlen && tmp) && (!reginfo || regtry(reginfo, &s))) \
+ goto got_it;
+
+/* We know what class REx starts with. Try to find this position... */
+/* if reginfo is NULL, its a dryrun */
+/* annoyingly all the vars in this routine have different names from their counterparts
+ in regmatch. /grrr */
+
+STATIC char *
+S_find_byclass(pTHX_ regexp * prog, const regnode *c, char *s,
+ const char *strend, regmatch_info *reginfo)
+{
+ dVAR;
+ const I32 doevery = (prog->intflags & PREGf_SKIP) == 0;
+ char *pat_string; /* The pattern's exactish string */
+ char *pat_end; /* ptr to end char of pat_string */
+ re_fold_t folder; /* Function for computing non-utf8 folds */
+ const U8 *fold_array; /* array for folding ords < 256 */
+ STRLEN ln;
+ STRLEN lnc;
+ register STRLEN uskip;
+ U8 c1;
+ U8 c2;
+ char *e;
+ register I32 tmp = 1; /* Scratch variable? */
+ register const bool utf8_target = PL_reg_match_utf8;
+ UV utf8_fold_flags = 0;
+ RXi_GET_DECL(prog,progi);
+
+ PERL_ARGS_ASSERT_FIND_BYCLASS;
+
+ /* We know what class it must start with. */
+ switch (OP(c)) {
+ case ANYOFV:
+ case ANYOF:
+ if (utf8_target || OP(c) == ANYOFV) {
+ STRLEN inclasslen = strend - s;
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ reginclass(prog, c, (U8*)s, &inclasslen, utf8_target));
+ }
+ else {
+ REXEC_FBC_CLASS_SCAN(REGINCLASS(prog, c, (U8*)s));
+ }
+ break;
+ case CANY:
+ REXEC_FBC_SCAN(
+ if (tmp && (!reginfo || regtry(reginfo, &s)))
+ goto got_it;
+ else
+ tmp = doevery;
+ );
+ break;
+
+ case EXACTFA:
+ if (UTF_PATTERN || utf8_target) {
+ utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_exactf_utf8;
+ }
+ fold_array = PL_fold_latin1; /* Latin1 folds are not affected by */
+ folder = foldEQ_latin1; /* /a, except the sharp s one which */
+ goto do_exactf_non_utf8; /* isn't dealt with by these */
+
+ case EXACTF:
+ if (utf8_target) {
+
+ /* regcomp.c already folded this if pattern is in UTF-8 */
+ utf8_fold_flags = 0;
+ goto do_exactf_utf8;
+ }
+ fold_array = PL_fold;
+ folder = foldEQ;
+ goto do_exactf_non_utf8;
+
+ case EXACTFL:
+ if (UTF_PATTERN || utf8_target) {
+ utf8_fold_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_exactf_utf8;
+ }
+ fold_array = PL_fold_locale;
+ folder = foldEQ_locale;
+ goto do_exactf_non_utf8;
+
+ case EXACTFU_SS:
+ if (UTF_PATTERN) {
+ utf8_fold_flags = FOLDEQ_S2_ALREADY_FOLDED;
+ }
+ goto do_exactf_utf8;
+
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU:
+ if (UTF_PATTERN || utf8_target) {
+ utf8_fold_flags = (UTF_PATTERN) ? FOLDEQ_S2_ALREADY_FOLDED : 0;
+ goto do_exactf_utf8;
+ }
+
+ /* Any 'ss' in the pattern should have been replaced by regcomp,
+ * so we don't have to worry here about this single special case
+ * in the Latin1 range */
+ fold_array = PL_fold_latin1;
+ folder = foldEQ_latin1;
+
+ /* FALL THROUGH */
+
+ do_exactf_non_utf8: /* Neither pattern nor string are UTF8, and there
+ are no glitches with fold-length differences
+ between the target string and pattern */
+
+ /* The idea in the non-utf8 EXACTF* cases is to first find the
+ * first character of the EXACTF* node and then, if necessary,
+ * case-insensitively compare the full text of the node. c1 is the
+ * first character. c2 is its fold. This logic will not work for
+ * Unicode semantics and the german sharp ss, which hence should
+ * not be compiled into a node that gets here. */
+ pat_string = STRING(c);
+ ln = STR_LEN(c); /* length to match in octets/bytes */
+
+ /* We know that we have to match at least 'ln' bytes (which is the
+ * same as characters, since not utf8). If we have to match 3
+ * characters, and there are only 2 availabe, we know without
+ * trying that it will fail; so don't start a match past the
+ * required minimum number from the far end */
+ e = HOP3c(strend, -((I32)ln), s);
+
+ if (!reginfo && e < s) {
+ e = s; /* Due to minlen logic of intuit() */
+ }
+
+ c1 = *pat_string;
+ c2 = fold_array[c1];
+ if (c1 == c2) { /* If char and fold are the same */
+ REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1);
+ }
+ else {
+ REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1 || *(U8*)s == c2);
+ }
+ break;
+
+ do_exactf_utf8:
+ {
+ unsigned expansion;
+
+
+ /* If one of the operands is in utf8, we can't use the simpler
+ * folding above, due to the fact that many different characters
+ * can have the same fold, or portion of a fold, or different-
+ * length fold */
+ pat_string = STRING(c);
+ ln = STR_LEN(c); /* length to match in octets/bytes */
+ pat_end = pat_string + ln;
+ lnc = (UTF_PATTERN) /* length to match in characters */
+ ? utf8_length((U8 *) pat_string, (U8 *) pat_end)
+ : ln;
+
+ /* We have 'lnc' characters to match in the pattern, but because of
+ * multi-character folding, each character in the target can match
+ * up to 3 characters (Unicode guarantees it will never exceed
+ * this) if it is utf8-encoded; and up to 2 if not (based on the
+ * fact that the Latin 1 folds are already determined, and the
+ * only multi-char fold in that range is the sharp-s folding to
+ * 'ss'. Thus, a pattern character can match as little as 1/3 of a
+ * string character. Adjust lnc accordingly, rounding up, so that
+ * if we need to match at least 4+1/3 chars, that really is 5. */
+ expansion = (utf8_target) ? UTF8_MAX_FOLD_CHAR_EXPAND : 2;
+ lnc = (lnc + expansion - 1) / expansion;
+
+ /* As in the non-UTF8 case, if we have to match 3 characters, and
+ * only 2 are left, it's guaranteed to fail, so don't start a
+ * match that would require us to go beyond the end of the string
+ */
+ e = HOP3c(strend, -((I32)lnc), s);
+
+ if (!reginfo && e < s) {
+ e = s; /* Due to minlen logic of intuit() */
+ }
+
+ /* XXX Note that we could recalculate e to stop the loop earlier,
+ * as the worst case expansion above will rarely be met, and as we
+ * go along we would usually find that e moves further to the left.
+ * This would happen only after we reached the point in the loop
+ * where if there were no expansion we should fail. Unclear if
+ * worth the expense */
+
+ while (s <= e) {
+ char *my_strend= (char *)strend;
+ if (foldEQ_utf8_flags(s, &my_strend, 0, utf8_target,
+ pat_string, NULL, ln, cBOOL(UTF_PATTERN), utf8_fold_flags)
+ && (!reginfo || regtry(reginfo, &s)) )
+ {
+ goto got_it;
+ }
+ s += (utf8_target) ? UTF8SKIP(s) : 1;
+ }
+ break;
+ }
+ case BOUNDL:
+ PL_reg_flags |= RF_tainted;
+ FBC_BOUND(isALNUM_LC,
+ isALNUM_LC_uvchr(UNI_TO_NATIVE(tmp)),
+ isALNUM_LC_utf8((U8*)s));
+ break;
+ case NBOUNDL:
+ PL_reg_flags |= RF_tainted;
+ FBC_NBOUND(isALNUM_LC,
+ isALNUM_LC_uvchr(UNI_TO_NATIVE(tmp)),
+ isALNUM_LC_utf8((U8*)s));
+ break;
+ case BOUND:
+ FBC_BOUND(isWORDCHAR,
+ isALNUM_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_alnum, (U8*)s, utf8_target)));
+ break;
+ case BOUNDA:
+ FBC_BOUND_NOLOAD(isWORDCHAR_A,
+ isWORDCHAR_A(tmp),
+ isWORDCHAR_A((U8*)s));
+ break;
+ case NBOUND:
+ FBC_NBOUND(isWORDCHAR,
+ isALNUM_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_alnum, (U8*)s, utf8_target)));
+ break;
+ case NBOUNDA:
+ FBC_NBOUND_NOLOAD(isWORDCHAR_A,
+ isWORDCHAR_A(tmp),
+ isWORDCHAR_A((U8*)s));
+ break;
+ case BOUNDU:
+ FBC_BOUND(isWORDCHAR_L1,
+ isALNUM_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_alnum, (U8*)s, utf8_target)));
+ break;
+ case NBOUNDU:
+ FBC_NBOUND(isWORDCHAR_L1,
+ isALNUM_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_alnum, (U8*)s, utf8_target)));
+ break;
+ case ALNUML:
+ REXEC_FBC_CSCAN_TAINT(
+ isALNUM_LC_utf8((U8*)s),
+ isALNUM_LC(*s)
+ );
+ break;
+ case ALNUMU:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_ALNUM(),
+ swash_fetch(PL_utf8_alnum,(U8*)s, utf8_target),
+ isWORDCHAR_L1((U8) *s)
+ );
+ break;
+ case ALNUM:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_ALNUM(),
+ swash_fetch(PL_utf8_alnum,(U8*)s, utf8_target),
+ isWORDCHAR((U8) *s)
+ );
+ break;
+ case ALNUMA:
+ /* Don't need to worry about utf8, as it can match only a single
+ * byte invariant character */
+ REXEC_FBC_CLASS_SCAN( isWORDCHAR_A(*s));
+ break;
+ case NALNUMU:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_ALNUM(),
+ !swash_fetch(PL_utf8_alnum,(U8*)s, utf8_target),
+ ! isWORDCHAR_L1((U8) *s)
+ );
+ break;
+ case NALNUM:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_ALNUM(),
+ !swash_fetch(PL_utf8_alnum, (U8*)s, utf8_target),
+ ! isALNUM(*s)
+ );
+ break;
+ case NALNUMA:
+ REXEC_FBC_CSCAN(
+ !isWORDCHAR_A(*s),
+ !isWORDCHAR_A(*s)
+ );
+ break;
+ case NALNUML:
+ REXEC_FBC_CSCAN_TAINT(
+ !isALNUM_LC_utf8((U8*)s),
+ !isALNUM_LC(*s)
+ );
+ break;
+ case SPACEU:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_SPACE(),
+ *s == ' ' || swash_fetch(PL_utf8_space,(U8*)s, utf8_target),
+ isSPACE_L1((U8) *s)
+ );
+ break;
+ case SPACE:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_SPACE(),
+ *s == ' ' || swash_fetch(PL_utf8_space,(U8*)s, utf8_target),
+ isSPACE((U8) *s)
+ );
+ break;
+ case SPACEA:
+ /* Don't need to worry about utf8, as it can match only a single
+ * byte invariant character */
+ REXEC_FBC_CLASS_SCAN( isSPACE_A(*s));
+ break;
+ case SPACEL:
+ REXEC_FBC_CSCAN_TAINT(
+ isSPACE_LC_utf8((U8*)s),
+ isSPACE_LC(*s)
+ );
+ break;
+ case NSPACEU:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_SPACE(),
+ !( *s == ' ' || swash_fetch(PL_utf8_space,(U8*)s, utf8_target)),
+ ! isSPACE_L1((U8) *s)
+ );
+ break;
+ case NSPACE:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_SPACE(),
+ !(*s == ' ' || swash_fetch(PL_utf8_space,(U8*)s, utf8_target)),
+ ! isSPACE((U8) *s)
+ );
+ break;
+ case NSPACEA:
+ REXEC_FBC_CSCAN(
+ !isSPACE_A(*s),
+ !isSPACE_A(*s)
+ );
+ break;
+ case NSPACEL:
+ REXEC_FBC_CSCAN_TAINT(
+ !isSPACE_LC_utf8((U8*)s),
+ !isSPACE_LC(*s)
+ );
+ break;
+ case DIGIT:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_DIGIT(),
+ swash_fetch(PL_utf8_digit,(U8*)s, utf8_target),
+ isDIGIT(*s)
+ );
+ break;
+ case DIGITA:
+ /* Don't need to worry about utf8, as it can match only a single
+ * byte invariant character */
+ REXEC_FBC_CLASS_SCAN( isDIGIT_A(*s));
+ break;
+ case DIGITL:
+ REXEC_FBC_CSCAN_TAINT(
+ isDIGIT_LC_utf8((U8*)s),
+ isDIGIT_LC(*s)
+ );
+ break;
+ case NDIGIT:
+ REXEC_FBC_CSCAN_PRELOAD(
+ LOAD_UTF8_CHARCLASS_DIGIT(),
+ !swash_fetch(PL_utf8_digit,(U8*)s, utf8_target),
+ !isDIGIT(*s)
+ );
+ break;
+ case NDIGITA:
+ REXEC_FBC_CSCAN(
+ !isDIGIT_A(*s),
+ !isDIGIT_A(*s)
+ );
+ break;
+ case NDIGITL:
+ REXEC_FBC_CSCAN_TAINT(
+ !isDIGIT_LC_utf8((U8*)s),
+ !isDIGIT_LC(*s)
+ );
+ break;
+ case LNBREAK:
+ REXEC_FBC_CSCAN(
+ is_LNBREAK_utf8(s),
+ is_LNBREAK_latin1(s)
+ );
+ break;
+ case VERTWS:
+ REXEC_FBC_CSCAN(
+ is_VERTWS_utf8(s),
+ is_VERTWS_latin1(s)
+ );
+ break;
+ case NVERTWS:
+ REXEC_FBC_CSCAN(
+ !is_VERTWS_utf8(s),
+ !is_VERTWS_latin1(s)
+ );
+ break;
+ case HORIZWS:
+ REXEC_FBC_CSCAN(
+ is_HORIZWS_utf8(s),
+ is_HORIZWS_latin1(s)
+ );
+ break;
+ case NHORIZWS:
+ REXEC_FBC_CSCAN(
+ !is_HORIZWS_utf8(s),
+ !is_HORIZWS_latin1(s)
+ );
+ break;
+ case AHOCORASICKC:
+ case AHOCORASICK:
+ {
+ DECL_TRIE_TYPE(c);
+ /* what trie are we using right now */
+ reg_ac_data *aho
+ = (reg_ac_data*)progi->data->data[ ARG( c ) ];
+ reg_trie_data *trie
+ = (reg_trie_data*)progi->data->data[ aho->trie ];
+ HV *widecharmap = MUTABLE_HV(progi->data->data[ aho->trie + 1 ]);
+
+ const char *last_start = strend - trie->minlen;
+#ifdef DEBUGGING
+ const char *real_start = s;
+#endif
+ STRLEN maxlen = trie->maxlen;
+ SV *sv_points;
+ U8 **points; /* map of where we were in the input string
+ when reading a given char. For ASCII this
+ is unnecessary overhead as the relationship
+ is always 1:1, but for Unicode, especially
+ case folded Unicode this is not true. */
+ U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
+ U8 *bitmap=NULL;
+
+
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ /* We can't just allocate points here. We need to wrap it in
+ * an SV so it gets freed properly if there is a croak while
+ * running the match */
+ ENTER;
+ SAVETMPS;
+ sv_points=newSV(maxlen * sizeof(U8 *));
+ SvCUR_set(sv_points,
+ maxlen * sizeof(U8 *));
+ SvPOK_on(sv_points);
+ sv_2mortal(sv_points);
+ points=(U8**)SvPV_nolen(sv_points );
+ if ( trie_type != trie_utf8_fold
+ && (trie->bitmap || OP(c)==AHOCORASICKC) )
+ {
+ if (trie->bitmap)
+ bitmap=(U8*)trie->bitmap;
+ else
+ bitmap=(U8*)ANYOF_BITMAP(c);
+ }
+ /* this is the Aho-Corasick algorithm modified a touch
+ to include special handling for long "unknown char"
+ sequences. The basic idea being that we use AC as long
+ as we are dealing with a possible matching char, when
+ we encounter an unknown char (and we have not encountered
+ an accepting state) we scan forward until we find a legal
+ starting char.
+ AC matching is basically that of trie matching, except
+ that when we encounter a failing transition, we fall back
+ to the current states "fail state", and try the current char
+ again, a process we repeat until we reach the root state,
+ state 1, or a legal transition. If we fail on the root state
+ then we can either terminate if we have reached an accepting
+ state previously, or restart the entire process from the beginning
+ if we have not.
+
+ */
+ while (s <= last_start) {
+ const U32 uniflags = UTF8_ALLOW_DEFAULT;
+ U8 *uc = (U8*)s;
+ U16 charid = 0;
+ U32 base = 1;
+ U32 state = 1;
+ UV uvc = 0;
+ STRLEN len = 0;
+ STRLEN foldlen = 0;
+ U8 *uscan = (U8*)NULL;
+ U8 *leftmost = NULL;
+#ifdef DEBUGGING
+ U32 accepted_word= 0;
+#endif
+ U32 pointpos = 0;
+
+ while ( state && uc <= (U8*)strend ) {
+ int failed=0;
+ U32 word = aho->states[ state ].wordnum;
+
+ if( state==1 ) {
+ if ( bitmap ) {
+ DEBUG_TRIE_EXECUTE_r(
+ if ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
+ dump_exec_pos( (char *)uc, c, strend, real_start,
+ (char *)uc, utf8_target );
+ PerlIO_printf( Perl_debug_log,
+ " Scanning for legal start char...\n");
+ }
+ );
+ if (utf8_target) {
+ while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
+ uc += UTF8SKIP(uc);
+ }
+ } else {
+ while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
+ uc++;
+ }
+ }
+ s= (char *)uc;
+ }
+ if (uc >(U8*)last_start) break;
+ }
+
+ if ( word ) {
+ U8 *lpos= points[ (pointpos - trie->wordinfo[word].len) % maxlen ];
+ if (!leftmost || lpos < leftmost) {
+ DEBUG_r(accepted_word=word);
+ leftmost= lpos;
+ }
+ if (base==0) break;
+
+ }
+ points[pointpos++ % maxlen]= uc;
+ REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc,
+ uscan, len, uvc, charid, foldlen,
+ foldbuf, uniflags);
+ DEBUG_TRIE_EXECUTE_r({
+ dump_exec_pos( (char *)uc, c, strend, real_start,
+ s, utf8_target );
+ PerlIO_printf(Perl_debug_log,
+ " Charid:%3u CP:%4"UVxf" ",
+ charid, uvc);
+ });
+
+ do {
+#ifdef DEBUGGING
+ word = aho->states[ state ].wordnum;
+#endif
+ base = aho->states[ state ].trans.base;
+
+ DEBUG_TRIE_EXECUTE_r({
+ if (failed)
+ dump_exec_pos( (char *)uc, c, strend, real_start,
+ s, utf8_target );
+ PerlIO_printf( Perl_debug_log,
+ "%sState: %4"UVxf", word=%"UVxf,
+ failed ? " Fail transition to " : "",
+ (UV)state, (UV)word);
+ });
+ if ( base ) {
+ U32 tmp;
+ I32 offset;
+ if (charid &&
+ ( ((offset = base + charid
+ - 1 - trie->uniquecharcount)) >= 0)
+ && ((U32)offset < trie->lasttrans)
+ && trie->trans[offset].check == state
+ && (tmp=trie->trans[offset].next))
+ {
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log," - legal\n"));
+ state = tmp;
+ break;
+ }
+ else {
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log," - fail\n"));
+ failed = 1;
+ state = aho->fail[state];
+ }
+ }
+ else {
+ /* we must be accepting here */
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log," - accepting\n"));
+ failed = 1;
+ break;
+ }
+ } while(state);
+ uc += len;
+ if (failed) {
+ if (leftmost)
+ break;
+ if (!state) state = 1;
+ }
+ }
+ if ( aho->states[ state ].wordnum ) {
+ U8 *lpos = points[ (pointpos - trie->wordinfo[aho->states[ state ].wordnum].len) % maxlen ];
+ if (!leftmost || lpos < leftmost) {
+ DEBUG_r(accepted_word=aho->states[ state ].wordnum);
+ leftmost = lpos;
+ }
+ }
+ if (leftmost) {
+ s = (char*)leftmost;
+ DEBUG_TRIE_EXECUTE_r({
+ PerlIO_printf(
+ Perl_debug_log,"Matches word #%"UVxf" at position %"IVdf". Trying full pattern...\n",
+ (UV)accepted_word, (IV)(s - real_start)
+ );
+ });
+ if (!reginfo || regtry(reginfo, &s)) {
+ FREETMPS;
+ LEAVE;
+ goto got_it;
+ }
+ s = HOPc(s,1);
+ DEBUG_TRIE_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,"Pattern failed. Looking for new start point...\n");
+ });
+ } else {
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log,"No match.\n"));
+ break;
+ }
+ }
+ FREETMPS;
+ LEAVE;
+ }
+ break;
+ default:
+ Perl_croak(aTHX_ "panic: unknown regstclass %d", (int)OP(c));
+ break;
+ }
+ return 0;
+ got_it:
+ return s;
+}
+
+
+/*
+ - regexec_flags - match a regexp against a string
+ */
+I32
+Perl_regexec_flags(pTHX_ REGEXP * const rx, char *stringarg, register char *strend,
+ char *strbeg, I32 minend, SV *sv, void *data, U32 flags)
+/* strend: pointer to null at end of string */
+/* strbeg: real beginning of string */
+/* minend: end of match must be >=minend after stringarg. */
+/* data: May be used for some additional optimizations.
+ Currently its only used, with a U32 cast, for transmitting
+ the ganch offset when doing a /g match. This will change */
+/* nosave: For optimizations. */
+{
+ dVAR;
+ struct regexp *const prog = (struct regexp *)SvANY(rx);
+ /*register*/ char *s;
+ register regnode *c;
+ /*register*/ char *startpos = stringarg;
+ I32 minlen; /* must match at least this many chars */
+ I32 dontbother = 0; /* how many characters not to try at end */
+ I32 end_shift = 0; /* Same for the end. */ /* CC */
+ I32 scream_pos = -1; /* Internal iterator of scream. */
+ char *scream_olds = NULL;
+ const bool utf8_target = cBOOL(DO_UTF8(sv));
+ I32 multiline;
+ RXi_GET_DECL(prog,progi);
+ regmatch_info reginfo; /* create some info to pass to regtry etc */
+ regexp_paren_pair *swap = NULL;
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_REGEXEC_FLAGS;
+ PERL_UNUSED_ARG(data);
+
+ /* Be paranoid... */
+ if (prog == NULL || startpos == NULL) {
+ Perl_croak(aTHX_ "NULL regexp parameter");
+ return 0;
+ }
+
+ multiline = prog->extflags & RXf_PMf_MULTILINE;
+ reginfo.prog = rx; /* Yes, sorry that this is confusing. */
+
+ RX_MATCH_UTF8_set(rx, utf8_target);
+ DEBUG_EXECUTE_r(
+ debug_start_match(rx, utf8_target, startpos, strend,
+ "Matching");
+ );
+
+ minlen = prog->minlen;
+
+ if (strend - startpos < (minlen+(prog->check_offset_min<0?prog->check_offset_min:0))) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "String too short [regexec_flags]...\n"));
+ goto phooey;
+ }
+
+
+ /* Check validity of program. */
+ if (UCHARAT(progi->program) != REG_MAGIC) {
+ Perl_croak(aTHX_ "corrupted regexp program");
+ }
+
+ PL_reg_flags = 0;
+ PL_reg_eval_set = 0;
+ PL_reg_maxiter = 0;
+
+ if (RX_UTF8(rx))
+ PL_reg_flags |= RF_utf8;
+
+ /* Mark beginning of line for ^ and lookbehind. */
+ reginfo.bol = startpos; /* XXX not used ??? */
+ PL_bostr = strbeg;
+ reginfo.sv = sv;
+
+ /* Mark end of line for $ (and such) */
+ PL_regeol = strend;
+
+ /* see how far we have to get to not match where we matched before */
+ reginfo.till = startpos+minend;
+
+ /* If there is a "must appear" string, look for it. */
+ s = startpos;
+
+ if (prog->extflags & RXf_GPOS_SEEN) { /* Need to set reginfo->ganch */
+ MAGIC *mg;
+ if (flags & REXEC_IGNOREPOS){ /* Means: check only at start */
+ reginfo.ganch = startpos + prog->gofs;
+ DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
+ "GPOS IGNOREPOS: reginfo.ganch = startpos + %"UVxf"\n",(UV)prog->gofs));
+ } else if (sv && SvTYPE(sv) >= SVt_PVMG
+ && SvMAGIC(sv)
+ && (mg = mg_find(sv, PERL_MAGIC_regex_global))
+ && mg->mg_len >= 0) {
+ reginfo.ganch = strbeg + mg->mg_len; /* Defined pos() */
+ DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
+ "GPOS MAGIC: reginfo.ganch = strbeg + %"IVdf"\n",(IV)mg->mg_len));
+
+ if (prog->extflags & RXf_ANCH_GPOS) {
+ if (s > reginfo.ganch)
+ goto phooey;
+ s = reginfo.ganch - prog->gofs;
+ DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
+ "GPOS ANCH_GPOS: s = ganch - %"UVxf"\n",(UV)prog->gofs));
+ if (s < strbeg)
+ goto phooey;
+ }
+ }
+ else if (data) {
+ reginfo.ganch = strbeg + PTR2UV(data);
+ DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
+ "GPOS DATA: reginfo.ganch= strbeg + %"UVxf"\n",PTR2UV(data)));
+
+ } else { /* pos() not defined */
+ reginfo.ganch = strbeg;
+ DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
+ "GPOS: reginfo.ganch = strbeg\n"));
+ }
+ }
+ if (PL_curpm && (PM_GETRE(PL_curpm) == rx)) {
+ /* We have to be careful. If the previous successful match
+ was from this regex we don't want a subsequent partially
+ successful match to clobber the old results.
+ So when we detect this possibility we add a swap buffer
+ to the re, and switch the buffer each match. If we fail
+ we switch it back, otherwise we leave it swapped.
+ */
+ swap = prog->offs;
+ /* do we need a save destructor here for eval dies? */
+ Newxz(prog->offs, (prog->nparens + 1), regexp_paren_pair);
+ }
+ if (!(flags & REXEC_CHECKED) && (prog->check_substr != NULL || prog->check_utf8 != NULL)) {
+ re_scream_pos_data d;
+
+ d.scream_olds = &scream_olds;
+ d.scream_pos = &scream_pos;
+ s = re_intuit_start(rx, sv, s, strend, flags, &d);
+ if (!s) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Not present...\n"));
+ goto phooey; /* not present */
+ }
+ }
+
+
+
+ /* Simplest case: anchored match need be tried only once. */
+ /* [unless only anchor is BOL and multiline is set] */
+ if (prog->extflags & (RXf_ANCH & ~RXf_ANCH_GPOS)) {
+ if (s == startpos && regtry(®info, &startpos))
+ goto got_it;
+ else if (multiline || (prog->intflags & PREGf_IMPLICIT)
+ || (prog->extflags & RXf_ANCH_MBOL)) /* XXXX SBOL? */
+ {
+ char *end;
+
+ if (minlen)
+ dontbother = minlen - 1;
+ end = HOP3c(strend, -dontbother, strbeg) - 1;
+ /* for multiline we only have to try after newlines */
+ if (prog->check_substr || prog->check_utf8) {
+ /* because of the goto we can not easily reuse the macros for bifurcating the
+ unicode/non-unicode match modes here like we do elsewhere - demerphq */
+ if (utf8_target) {
+ if (s == startpos)
+ goto after_try_utf8;
+ while (1) {
+ if (regtry(®info, &s)) {
+ goto got_it;
+ }
+ after_try_utf8:
+ if (s > end) {
+ goto phooey;
+ }
+ if (prog->extflags & RXf_USE_INTUIT) {
+ s = re_intuit_start(rx, sv, s + UTF8SKIP(s), strend, flags, NULL);
+ if (!s) {
+ goto phooey;
+ }
+ }
+ else {
+ s += UTF8SKIP(s);
+ }
+ }
+ } /* end search for check string in unicode */
+ else {
+ if (s == startpos) {
+ goto after_try_latin;
+ }
+ while (1) {
+ if (regtry(®info, &s)) {
+ goto got_it;
+ }
+ after_try_latin:
+ if (s > end) {
+ goto phooey;
+ }
+ if (prog->extflags & RXf_USE_INTUIT) {
+ s = re_intuit_start(rx, sv, s + 1, strend, flags, NULL);
+ if (!s) {
+ goto phooey;
+ }
+ }
+ else {
+ s++;
+ }
+ }
+ } /* end search for check string in latin*/
+ } /* end search for check string */
+ else { /* search for newline */
+ if (s > startpos) {
+ /*XXX: The s-- is almost definitely wrong here under unicode - demeprhq*/
+ s--;
+ }
+ /* We can use a more efficient search as newlines are the same in unicode as they are in latin */
+ while (s <= end) { /* note it could be possible to match at the end of the string */
+ if (*s++ == '\n') { /* don't need PL_utf8skip here */
+ if (regtry(®info, &s))
+ goto got_it;
+ }
+ }
+ } /* end search for newline */
+ } /* end anchored/multiline check string search */
+ goto phooey;
+ } else if (RXf_GPOS_CHECK == (prog->extflags & RXf_GPOS_CHECK))
+ {
+ /* the warning about reginfo.ganch being used without initialization
+ is bogus -- we set it above, when prog->extflags & RXf_GPOS_SEEN
+ and we only enter this block when the same bit is set. */
+ char *tmp_s = reginfo.ganch - prog->gofs;
+
+ if (tmp_s >= strbeg && regtry(®info, &tmp_s))
+ goto got_it;
+ goto phooey;
+ }
+
+ /* Messy cases: unanchored match. */
+ if ((prog->anchored_substr || prog->anchored_utf8) && prog->intflags & PREGf_SKIP) {
+ /* we have /x+whatever/ */
+ /* it must be a one character string (XXXX Except UTF_PATTERN?) */
+ char ch;
+#ifdef DEBUGGING
+ int did_match = 0;
+#endif
+ if (!(utf8_target ? prog->anchored_utf8 : prog->anchored_substr))
+ utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
+ ch = SvPVX_const(utf8_target ? prog->anchored_utf8 : prog->anchored_substr)[0];
+
+ if (utf8_target) {
+ REXEC_FBC_SCAN(
+ if (*s == ch) {
+ DEBUG_EXECUTE_r( did_match = 1 );
+ if (regtry(®info, &s)) goto got_it;
+ s += UTF8SKIP(s);
+ while (s < strend && *s == ch)
+ s += UTF8SKIP(s);
+ }
+ );
+ }
+ else {
+ REXEC_FBC_SCAN(
+ if (*s == ch) {
+ DEBUG_EXECUTE_r( did_match = 1 );
+ if (regtry(®info, &s)) goto got_it;
+ s++;
+ while (s < strend && *s == ch)
+ s++;
+ }
+ );
+ }
+ DEBUG_EXECUTE_r(if (!did_match)
+ PerlIO_printf(Perl_debug_log,
+ "Did not find anchored character...\n")
+ );
+ }
+ else if (prog->anchored_substr != NULL
+ || prog->anchored_utf8 != NULL
+ || ((prog->float_substr != NULL || prog->float_utf8 != NULL)
+ && prog->float_max_offset < strend - s)) {
+ SV *must;
+ I32 back_max;
+ I32 back_min;
+ char *last;
+ char *last1; /* Last position checked before */
+#ifdef DEBUGGING
+ int did_match = 0;
+#endif
+ if (prog->anchored_substr || prog->anchored_utf8) {
+ if (!(utf8_target ? prog->anchored_utf8 : prog->anchored_substr))
+ utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
+ must = utf8_target ? prog->anchored_utf8 : prog->anchored_substr;
+ back_max = back_min = prog->anchored_offset;
+ } else {
+ if (!(utf8_target ? prog->float_utf8 : prog->float_substr))
+ utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
+ must = utf8_target ? prog->float_utf8 : prog->float_substr;
+ back_max = prog->float_max_offset;
+ back_min = prog->float_min_offset;
+ }
+
+
+ if (must == &PL_sv_undef)
+ /* could not downgrade utf8 check substring, so must fail */
+ goto phooey;
+
+ if (back_min<0) {
+ last = strend;
+ } else {
+ last = HOP3c(strend, /* Cannot start after this */
+ -(I32)(CHR_SVLEN(must)
+ - (SvTAIL(must) != 0) + back_min), strbeg);
+ }
+ if (s > PL_bostr)
+ last1 = HOPc(s, -1);
+ else
+ last1 = s - 1; /* bogus */
+
+ /* XXXX check_substr already used to find "s", can optimize if
+ check_substr==must. */
+ scream_pos = -1;
+ dontbother = end_shift;
+ strend = HOPc(strend, -dontbother);
+ while ( (s <= last) &&
+ ((flags & REXEC_SCREAM) && SvSCREAM(sv)
+ ? (s = screaminstr(sv, must, HOP3c(s, back_min, (back_min<0 ? strbeg : strend)) - strbeg,
+ end_shift, &scream_pos, 0))
+ : (s = fbm_instr((unsigned char*)HOP3(s, back_min, (back_min<0 ? strbeg : strend)),
+ (unsigned char*)strend, must,
+ multiline ? FBMrf_MULTILINE : 0))) ) {
+ /* we may be pointing at the wrong string */
+ if ((flags & REXEC_SCREAM) && RXp_MATCH_COPIED(prog))
+ s = strbeg + (s - SvPVX_const(sv));
+ DEBUG_EXECUTE_r( did_match = 1 );
+ if (HOPc(s, -back_max) > last1) {
+ last1 = HOPc(s, -back_min);
+ s = HOPc(s, -back_max);
+ }
+ else {
+ char * const t = (last1 >= PL_bostr) ? HOPc(last1, 1) : last1 + 1;
+
+ last1 = HOPc(s, -back_min);
+ s = t;
+ }
+ if (utf8_target) {
+ while (s <= last1) {
+ if (regtry(®info, &s))
+ goto got_it;
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (s <= last1) {
+ if (regtry(®info, &s))
+ goto got_it;
+ s++;
+ }
+ }
+ }
+ DEBUG_EXECUTE_r(if (!did_match) {
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
+ PerlIO_printf(Perl_debug_log, "Did not find %s substr %s%s...\n",
+ ((must == prog->anchored_substr || must == prog->anchored_utf8)
+ ? "anchored" : "floating"),
+ quoted, RE_SV_TAIL(must));
+ });
+ goto phooey;
+ }
+ else if ( (c = progi->regstclass) ) {
+ if (minlen) {
+ const OPCODE op = OP(progi->regstclass);
+ /* don't bother with what can't match */
+ if (PL_regkind[op] != EXACT && op != CANY && PL_regkind[op] != TRIE)
+ strend = HOPc(strend, -(minlen - 1));
+ }
+ DEBUG_EXECUTE_r({
+ SV * const prop = sv_newmortal();
+ regprop(prog, prop, c);
+ {
+ RE_PV_QUOTED_DECL(quoted,utf8_target,PERL_DEBUG_PAD_ZERO(1),
+ s,strend-s,60);
+ PerlIO_printf(Perl_debug_log,
+ "Matching stclass %.*s against %s (%d bytes)\n",
+ (int)SvCUR(prop), SvPVX_const(prop),
+ quoted, (int)(strend - s));
+ }
+ });
+ if (find_byclass(prog, c, s, strend, ®info))
+ goto got_it;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Contradicts stclass... [regexec_flags]\n"));
+ }
+ else {
+ dontbother = 0;
+ if (prog->float_substr != NULL || prog->float_utf8 != NULL) {
+ /* Trim the end. */
+ char *last= NULL;
+ SV* float_real;
+
+ if (!(utf8_target ? prog->float_utf8 : prog->float_substr))
+ utf8_target ? to_utf8_substr(prog) : to_byte_substr(prog);
+ float_real = utf8_target ? prog->float_utf8 : prog->float_substr;
+
+ if ((flags & REXEC_SCREAM) && SvSCREAM(sv)) {
+ last = screaminstr(sv, float_real, s - strbeg,
+ end_shift, &scream_pos, 1); /* last one */
+ if (!last)
+ last = scream_olds; /* Only one occurrence. */
+ /* we may be pointing at the wrong string */
+ else if (RXp_MATCH_COPIED(prog))
+ s = strbeg + (s - SvPVX_const(sv));
+ }
+ else {
+ STRLEN len;
+ const char * const little = SvPV_const(float_real, len);
+ if (SvTAIL(float_real)) {
+ /* This means that float_real contains an artificial \n on the end
+ * due to the presence of something like this: /foo$/
+ * where we can match both "foo" and "foo\n" at the end of the string.
+ * So we have to compare the end of the string first against the float_real
+ * without the \n and then against the full float_real with the string.
+ * We have to watch out for cases where the string might be smaller
+ * than the float_real or the float_real without the \n.
+ */
+ char *checkpos= strend - len;
+ DEBUG_OPTIMISE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sChecking for float_real.%s\n",
+ PL_colors[4], PL_colors[5]));
+ if (checkpos + 1 < strbeg) {
+ /* can't match, even if we remove the trailing \n string is too short to match */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sString shorter than required trailing substring, cannot match.%s\n",
+ PL_colors[4], PL_colors[5]));
+ goto phooey;
+ } else if (memEQ(checkpos + 1, little, len - 1)) {
+ /* can match, the end of the string matches without the "\n" */
+ last = checkpos + 1;
+ } else if (checkpos < strbeg) {
+ /* cant match, string is too short when the "\n" is included */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sString does not contain required trailing substring, cannot match.%s\n",
+ PL_colors[4], PL_colors[5]));
+ goto phooey;
+ } else if (!multiline) {
+ /* non multiline match, so compare with the "\n" at the end of the string */
+ if (memEQ(checkpos, little, len)) {
+ last= checkpos;
+ } else {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sString does not contain required trailing substring, cannot match.%s\n",
+ PL_colors[4], PL_colors[5]));
+ goto phooey;
+ }
+ } else {
+ /* multiline match, so we have to search for a place where the full string is located */
+ goto find_last;
+ }
+ } else {
+ find_last:
+ if (len)
+ last = rninstr(s, strend, little, little + len);
+ else
+ last = strend; /* matching "$" */
+ }
+ }
+ if (!last) {
+ /* at one point this block contained a comment which was probably
+ * incorrect, which said that this was a "should not happen" case.
+ * Even if it was true when it was written I am pretty sure it is
+ * not anymore, so I have removed the comment and replaced it with
+ * this one. Yves */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "String does not contain required substring, cannot match.\n"
+ ));
+ goto phooey;
+ }
+ dontbother = strend - last + prog->float_min_offset;
+ }
+ if (minlen && (dontbother < minlen))
+ dontbother = minlen - 1;
+ strend -= dontbother; /* this one's always in bytes! */
+ /* We don't know much -- general case. */
+ if (utf8_target) {
+ for (;;) {
+ if (regtry(®info, &s))
+ goto got_it;
+ if (s >= strend)
+ break;
+ s += UTF8SKIP(s);
+ };
+ }
+ else {
+ do {
+ if (regtry(®info, &s))
+ goto got_it;
+ } while (s++ < strend);
+ }
+ }
+
+ /* Failure. */
+ goto phooey;
+
+got_it:
+ Safefree(swap);
+ RX_MATCH_TAINTED_set(rx, PL_reg_flags & RF_tainted);
+
+ if (PL_reg_eval_set)
+ restore_pos(aTHX_ prog);
+ if (RXp_PAREN_NAMES(prog))
+ (void)hv_iterinit(RXp_PAREN_NAMES(prog));
+
+ /* make sure $`, $&, $', and $digit will work later */
+ if ( !(flags & REXEC_NOT_FIRST) ) {
+ RX_MATCH_COPY_FREE(rx);
+ if (flags & REXEC_COPY_STR) {
+ const I32 i = PL_regeol - startpos + (stringarg - strbeg);
+#ifdef PERL_OLD_COPY_ON_WRITE
+ if ((SvIsCOW(sv)
+ || (SvFLAGS(sv) & CAN_COW_MASK) == CAN_COW_FLAGS)) {
+ if (DEBUG_C_TEST) {
+ PerlIO_printf(Perl_debug_log,
+ "Copy on write: regexp capture, type %d\n",
+ (int) SvTYPE(sv));
+ }
+ prog->saved_copy = sv_setsv_cow(prog->saved_copy, sv);
+ prog->subbeg = (char *)SvPVX_const(prog->saved_copy);
+ assert (SvPOKp(prog->saved_copy));
+ } else
+#endif
+ {
+ RX_MATCH_COPIED_on(rx);
+ s = savepvn(strbeg, i);
+ prog->subbeg = s;
+ }
+ prog->sublen = i;
+ }
+ else {
+ prog->subbeg = strbeg;
+ prog->sublen = PL_regeol - strbeg; /* strend may have been modified */
+ }
+ }
+
+ return 1;
+
+phooey:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch failed%s\n",
+ PL_colors[4], PL_colors[5]));
+ if (PL_reg_eval_set)
+ restore_pos(aTHX_ prog);
+ if (swap) {
+ /* we failed :-( roll it back */
+ Safefree(prog->offs);
+ prog->offs = swap;
+ }
+
+ return 0;
+}
+
+
+/*
+ - regtry - try match at specific point
+ */
+STATIC I32 /* 0 failure, 1 success */
+S_regtry(pTHX_ regmatch_info *reginfo, char **startpos)
+{
+ dVAR;
+ CHECKPOINT lastcp;
+ REGEXP *const rx = reginfo->prog;
+ regexp *const prog = (struct regexp *)SvANY(rx);
+ RXi_GET_DECL(prog,progi);
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_REGTRY;
+
+ reginfo->cutpoint=NULL;
+
+ if ((prog->extflags & RXf_EVAL_SEEN) && !PL_reg_eval_set) {
+ MAGIC *mg;
+
+ PL_reg_eval_set = RS_init;
+ DEBUG_EXECUTE_r(DEBUG_s(
+ PerlIO_printf(Perl_debug_log, " setting stack tmpbase at %"IVdf"\n",
+ (IV)(PL_stack_sp - PL_stack_base));
+ ));
+ SAVESTACK_CXPOS();
+ cxstack[cxstack_ix].blk_oldsp = PL_stack_sp - PL_stack_base;
+ /* Otherwise OP_NEXTSTATE will free whatever on stack now. */
+ SAVETMPS;
+ /* Apparently this is not needed, judging by wantarray. */
+ /* SAVEI8(cxstack[cxstack_ix].blk_gimme);
+ cxstack[cxstack_ix].blk_gimme = G_SCALAR; */
+
+ if (reginfo->sv) {
+ /* Make $_ available to executed code. */
+ if (reginfo->sv != DEFSV) {
+ SAVE_DEFSV;
+ DEFSV_set(reginfo->sv);
+ }
+
+ if (!(SvTYPE(reginfo->sv) >= SVt_PVMG && SvMAGIC(reginfo->sv)
+ && (mg = mg_find(reginfo->sv, PERL_MAGIC_regex_global)))) {
+ /* prepare for quick setting of pos */
+#ifdef PERL_OLD_COPY_ON_WRITE
+ if (SvIsCOW(reginfo->sv))
+ sv_force_normal_flags(reginfo->sv, 0);
+#endif
+ mg = sv_magicext(reginfo->sv, NULL, PERL_MAGIC_regex_global,
+ &PL_vtbl_mglob, NULL, 0);
+ mg->mg_len = -1;
+ }
+ PL_reg_magic = mg;
+ PL_reg_oldpos = mg->mg_len;
+ SAVEDESTRUCTOR_X(restore_pos, prog);
+ }
+ if (!PL_reg_curpm) {
+ Newxz(PL_reg_curpm, 1, PMOP);
+#ifdef USE_ITHREADS
+ {
+ SV* const repointer = &PL_sv_undef;
+ /* this regexp is also owned by the new PL_reg_curpm, which
+ will try to free it. */
+ av_push(PL_regex_padav, repointer);
+ PL_reg_curpm->op_pmoffset = av_len(PL_regex_padav);
+ PL_regex_pad = AvARRAY(PL_regex_padav);
+ }
+#endif
+ }
+#ifdef USE_ITHREADS
+ /* It seems that non-ithreads works both with and without this code.
+ So for efficiency reasons it seems best not to have the code
+ compiled when it is not needed. */
+ /* This is safe against NULLs: */
+ ReREFCNT_dec(PM_GETRE(PL_reg_curpm));
+ /* PM_reg_curpm owns a reference to this regexp. */
+ (void)ReREFCNT_inc(rx);
+#endif
+ PM_SETRE(PL_reg_curpm, rx);
+ PL_reg_oldcurpm = PL_curpm;
+ PL_curpm = PL_reg_curpm;
+ if (RXp_MATCH_COPIED(prog)) {
+ /* Here is a serious problem: we cannot rewrite subbeg,
+ since it may be needed if this match fails. Thus
+ $` inside (?{}) could fail... */
+ PL_reg_oldsaved = prog->subbeg;
+ PL_reg_oldsavedlen = prog->sublen;
+#ifdef PERL_OLD_COPY_ON_WRITE
+ PL_nrs = prog->saved_copy;
+#endif
+ RXp_MATCH_COPIED_off(prog);
+ }
+ else
+ PL_reg_oldsaved = NULL;
+ prog->subbeg = PL_bostr;
+ prog->sublen = PL_regeol - PL_bostr; /* strend may have been modified */
+ }
+ DEBUG_EXECUTE_r(PL_reg_starttry = *startpos);
+ prog->offs[0].start = *startpos - PL_bostr;
+ PL_reginput = *startpos;
+ PL_reglastparen = &prog->lastparen;
+ PL_reglastcloseparen = &prog->lastcloseparen;
+ prog->lastparen = 0;
+ prog->lastcloseparen = 0;
+ PL_regsize = 0;
+ PL_regoffs = prog->offs;
+ if (PL_reg_start_tmpl <= prog->nparens) {
+ PL_reg_start_tmpl = prog->nparens*3/2 + 3;
+ if(PL_reg_start_tmp)
+ Renew(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
+ else
+ Newx(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
+ }
+
+ /* XXXX What this code is doing here?!!! There should be no need
+ to do this again and again, PL_reglastparen should take care of
+ this! --ilya*/
+
+ /* Tests pat.t#187 and split.t#{13,14} seem to depend on this code.
+ * Actually, the code in regcppop() (which Ilya may be meaning by
+ * PL_reglastparen), is not needed at all by the test suite
+ * (op/regexp, op/pat, op/split), but that code is needed otherwise
+ * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
+ * Meanwhile, this code *is* needed for the
+ * above-mentioned test suite tests to succeed. The common theme
+ * on those tests seems to be returning null fields from matches.
+ * --jhi updated by dapm */
+#if 1
+ if (prog->nparens) {
+ regexp_paren_pair *pp = PL_regoffs;
+ register I32 i;
+ for (i = prog->nparens; i > (I32)*PL_reglastparen; i--) {
+ ++pp;
+ pp->start = -1;
+ pp->end = -1;
+ }
+ }
+#endif
+ REGCP_SET(lastcp);
+ if (regmatch(reginfo, progi->program + 1)) {
+ PL_regoffs[0].end = PL_reginput - PL_bostr;
+ return 1;
+ }
+ if (reginfo->cutpoint)
+ *startpos= reginfo->cutpoint;
+ REGCP_UNWIND(lastcp);
+ return 0;
+}
+
+
+#define sayYES goto yes
+#define sayNO goto no
+#define sayNO_SILENT goto no_silent
+
+/* we dont use STMT_START/END here because it leads to
+ "unreachable code" warnings, which are bogus, but distracting. */
+#define CACHEsayNO \
+ if (ST.cache_mask) \
+ PL_reg_poscache[ST.cache_offset] |= ST.cache_mask; \
+ sayNO
+
+/* this is used to determine how far from the left messages like
+ 'failed...' are printed. It should be set such that messages
+ are inline with the regop output that created them.
+*/
+#define REPORT_CODE_OFF 32
+
+
+#define CHRTEST_UNINIT -1001 /* c1/c2 haven't been calculated yet */
+#define CHRTEST_VOID -1000 /* the c1/c2 "next char" test should be skipped */
+
+#define SLAB_FIRST(s) (&(s)->states[0])
+#define SLAB_LAST(s) (&(s)->states[PERL_REGMATCH_SLAB_SLOTS-1])
+
+/* grab a new slab and return the first slot in it */
+
+STATIC regmatch_state *
+S_push_slab(pTHX)
+{
+#if PERL_VERSION < 9 && !defined(PERL_CORE)
+ dMY_CXT;
+#endif
+ regmatch_slab *s = PL_regmatch_slab->next;
+ if (!s) {
+ Newx(s, 1, regmatch_slab);
+ s->prev = PL_regmatch_slab;
+ s->next = NULL;
+ PL_regmatch_slab->next = s;
+ }
+ PL_regmatch_slab = s;
+ return SLAB_FIRST(s);
+}
+
+
+/* push a new state then goto it */
+
+#define PUSH_STATE_GOTO(state, node) \
+ scan = node; \
+ st->resume_state = state; \
+ goto push_state;
+
+/* push a new state with success backtracking, then goto it */
+
+#define PUSH_YES_STATE_GOTO(state, node) \
+ scan = node; \
+ st->resume_state = state; \
+ goto push_yes_state;
+
+
+
+/*
+
+regmatch() - main matching routine
+
+This is basically one big switch statement in a loop. We execute an op,
+set 'next' to point the next op, and continue. If we come to a point which
+we may need to backtrack to on failure such as (A|B|C), we push a
+backtrack state onto the backtrack stack. On failure, we pop the top
+state, and re-enter the loop at the state indicated. If there are no more
+states to pop, we return failure.
+
+Sometimes we also need to backtrack on success; for example /A+/, where
+after successfully matching one A, we need to go back and try to
+match another one; similarly for lookahead assertions: if the assertion
+completes successfully, we backtrack to the state just before the assertion
+and then carry on. In these cases, the pushed state is marked as
+'backtrack on success too'. This marking is in fact done by a chain of
+pointers, each pointing to the previous 'yes' state. On success, we pop to
+the nearest yes state, discarding any intermediate failure-only states.
+Sometimes a yes state is pushed just to force some cleanup code to be
+called at the end of a successful match or submatch; e.g. (??{$re}) uses
+it to free the inner regex.
+
+Note that failure backtracking rewinds the cursor position, while
+success backtracking leaves it alone.
+
+A pattern is complete when the END op is executed, while a subpattern
+such as (?=foo) is complete when the SUCCESS op is executed. Both of these
+ops trigger the "pop to last yes state if any, otherwise return true"
+behaviour.
+
+A common convention in this function is to use A and B to refer to the two
+subpatterns (or to the first nodes thereof) in patterns like /A*B/: so A is
+the subpattern to be matched possibly multiple times, while B is the entire
+rest of the pattern. Variable and state names reflect this convention.
+
+The states in the main switch are the union of ops and failure/success of
+substates associated with with that op. For example, IFMATCH is the op
+that does lookahead assertions /(?=A)B/ and so the IFMATCH state means
+'execute IFMATCH'; while IFMATCH_A is a state saying that we have just
+successfully matched A and IFMATCH_A_fail is a state saying that we have
+just failed to match A. Resume states always come in pairs. The backtrack
+state we push is marked as 'IFMATCH_A', but when that is popped, we resume
+at IFMATCH_A or IFMATCH_A_fail, depending on whether we are backtracking
+on success or failure.
+
+The struct that holds a backtracking state is actually a big union, with
+one variant for each major type of op. The variable st points to the
+top-most backtrack struct. To make the code clearer, within each
+block of code we #define ST to alias the relevant union.
+
+Here's a concrete example of a (vastly oversimplified) IFMATCH
+implementation:
+
+ switch (state) {
+ ....
+
+#define ST st->u.ifmatch
+
+ case IFMATCH: // we are executing the IFMATCH op, (?=A)B
+ ST.foo = ...; // some state we wish to save
+ ...
+ // push a yes backtrack state with a resume value of
+ // IFMATCH_A/IFMATCH_A_fail, then continue execution at the
+ // first node of A:
+ PUSH_YES_STATE_GOTO(IFMATCH_A, A);
+ // NOTREACHED
+
+ case IFMATCH_A: // we have successfully executed A; now continue with B
+ next = B;
+ bar = ST.foo; // do something with the preserved value
+ break;
+
+ case IFMATCH_A_fail: // A failed, so the assertion failed
+ ...; // do some housekeeping, then ...
+ sayNO; // propagate the failure
+
+#undef ST
+
+ ...
+ }
+
+For any old-timers reading this who are familiar with the old recursive
+approach, the code above is equivalent to:
+
+ case IFMATCH: // we are executing the IFMATCH op, (?=A)B
+ {
+ int foo = ...
+ ...
+ if (regmatch(A)) {
+ next = B;
+ bar = foo;
+ break;
+ }
+ ...; // do some housekeeping, then ...
+ sayNO; // propagate the failure
+ }
+
+The topmost backtrack state, pointed to by st, is usually free. If you
+want to claim it, populate any ST.foo fields in it with values you wish to
+save, then do one of
+
+ PUSH_STATE_GOTO(resume_state, node);
+ PUSH_YES_STATE_GOTO(resume_state, node);
+
+which sets that backtrack state's resume value to 'resume_state', pushes a
+new free entry to the top of the backtrack stack, then goes to 'node'.
+On backtracking, the free slot is popped, and the saved state becomes the
+new free state. An ST.foo field in this new top state can be temporarily
+accessed to retrieve values, but once the main loop is re-entered, it
+becomes available for reuse.
+
+Note that the depth of the backtrack stack constantly increases during the
+left-to-right execution of the pattern, rather than going up and down with
+the pattern nesting. For example the stack is at its maximum at Z at the
+end of the pattern, rather than at X in the following:
+
+ /(((X)+)+)+....(Y)+....Z/
+
+The only exceptions to this are lookahead/behind assertions and the cut,
+(?>A), which pop all the backtrack states associated with A before
+continuing.
+
+Backtrack state structs are allocated in slabs of about 4K in size.
+PL_regmatch_state and st always point to the currently active state,
+and PL_regmatch_slab points to the slab currently containing
+PL_regmatch_state. The first time regmatch() is called, the first slab is
+allocated, and is never freed until interpreter destruction. When the slab
+is full, a new one is allocated and chained to the end. At exit from
+regmatch(), slabs allocated since entry are freed.
+
+*/
+
+
+#define DEBUG_STATE_pp(pp) \
+ DEBUG_STATE_r({ \
+ DUMP_EXEC_POS(locinput, scan, utf8_target); \
+ PerlIO_printf(Perl_debug_log, \
+ " %*s"pp" %s%s%s%s%s\n", \
+ depth*2, "", \
+ PL_reg_name[st->resume_state], \
+ ((st==yes_state||st==mark_state) ? "[" : ""), \
+ ((st==yes_state) ? "Y" : ""), \
+ ((st==mark_state) ? "M" : ""), \
+ ((st==yes_state||st==mark_state) ? "]" : "") \
+ ); \
+ });
+
+
+#define REG_NODE_NUM(x) ((x) ? (int)((x)-prog) : -1)
+
+#ifdef DEBUGGING
+
+STATIC void
+S_debug_start_match(pTHX_ const REGEXP *prog, const bool utf8_target,
+ const char *start, const char *end, const char *blurb)
+{
+ const bool utf8_pat = RX_UTF8(prog) ? 1 : 0;
+
+ PERL_ARGS_ASSERT_DEBUG_START_MATCH;
+
+ if (!PL_colorset)
+ reginitcolors();
+ {
+ RE_PV_QUOTED_DECL(s0, utf8_pat, PERL_DEBUG_PAD_ZERO(0),
+ RX_PRECOMP_const(prog), RX_PRELEN(prog), 60);
+
+ RE_PV_QUOTED_DECL(s1, utf8_target, PERL_DEBUG_PAD_ZERO(1),
+ start, end - start, 60);
+
+ PerlIO_printf(Perl_debug_log,
+ "%s%s REx%s %s against %s\n",
+ PL_colors[4], blurb, PL_colors[5], s0, s1);
+
+ if (utf8_target||utf8_pat)
+ PerlIO_printf(Perl_debug_log, "UTF-8 %s%s%s...\n",
+ utf8_pat ? "pattern" : "",
+ utf8_pat && utf8_target ? " and " : "",
+ utf8_target ? "string" : ""
+ );
+ }
+}
+
+STATIC void
+S_dump_exec_pos(pTHX_ const char *locinput,
+ const regnode *scan,
+ const char *loc_regeol,
+ const char *loc_bostr,
+ const char *loc_reg_starttry,
+ const bool utf8_target)
+{
+ const int docolor = *PL_colors[0] || *PL_colors[2] || *PL_colors[4];
+ const int taill = (docolor ? 10 : 7); /* 3 chars for "> <" */
+ int l = (loc_regeol - locinput) > taill ? taill : (loc_regeol - locinput);
+ /* The part of the string before starttry has one color
+ (pref0_len chars), between starttry and current
+ position another one (pref_len - pref0_len chars),
+ after the current position the third one.
+ We assume that pref0_len <= pref_len, otherwise we
+ decrease pref0_len. */
+ int pref_len = (locinput - loc_bostr) > (5 + taill) - l
+ ? (5 + taill) - l : locinput - loc_bostr;
+ int pref0_len;
+
+ PERL_ARGS_ASSERT_DUMP_EXEC_POS;
+
+ while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput - pref_len)))
+ pref_len++;
+ pref0_len = pref_len - (locinput - loc_reg_starttry);
+ if (l + pref_len < (5 + taill) && l < loc_regeol - locinput)
+ l = ( loc_regeol - locinput > (5 + taill) - pref_len
+ ? (5 + taill) - pref_len : loc_regeol - locinput);
+ while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput + l)))
+ l--;
+ if (pref0_len < 0)
+ pref0_len = 0;
+ if (pref0_len > pref_len)
+ pref0_len = pref_len;
+ {
+ const int is_uni = (utf8_target && OP(scan) != CANY) ? 1 : 0;
+
+ RE_PV_COLOR_DECL(s0,len0,is_uni,PERL_DEBUG_PAD(0),
+ (locinput - pref_len),pref0_len, 60, 4, 5);
+
+ RE_PV_COLOR_DECL(s1,len1,is_uni,PERL_DEBUG_PAD(1),
+ (locinput - pref_len + pref0_len),
+ pref_len - pref0_len, 60, 2, 3);
+
+ RE_PV_COLOR_DECL(s2,len2,is_uni,PERL_DEBUG_PAD(2),
+ locinput, loc_regeol - locinput, 10, 0, 1);
+
+ const STRLEN tlen=len0+len1+len2;
+ PerlIO_printf(Perl_debug_log,
+ "%4"IVdf" <%.*s%.*s%s%.*s>%*s|",
+ (IV)(locinput - loc_bostr),
+ len0, s0,
+ len1, s1,
+ (docolor ? "" : "> <"),
+ len2, s2,
+ (int)(tlen > 19 ? 0 : 19 - tlen),
+ "");
+ }
+}
+
+#endif
+
+/* reg_check_named_buff_matched()
+ * Checks to see if a named buffer has matched. The data array of
+ * buffer numbers corresponding to the buffer is expected to reside
+ * in the regexp->data->data array in the slot stored in the ARG() of
+ * node involved. Note that this routine doesn't actually care about the
+ * name, that information is not preserved from compilation to execution.
+ * Returns the index of the leftmost defined buffer with the given name
+ * or 0 if non of the buffers matched.
+ */
+STATIC I32
+S_reg_check_named_buff_matched(pTHX_ const regexp *rex, const regnode *scan)
+{
+ I32 n;
+ RXi_GET_DECL(rex,rexi);
+ SV *sv_dat= MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ I32 *nums=(I32*)SvPVX(sv_dat);
+
+ PERL_ARGS_ASSERT_REG_CHECK_NAMED_BUFF_MATCHED;
+
+ for ( n=0; n<SvIVX(sv_dat); n++ ) {
+ if ((I32)*PL_reglastparen >= nums[n] &&
+ PL_regoffs[nums[n]].end != -1)
+ {
+ return nums[n];
+ }
+ }
+ return 0;
+}
+
+
+/* free all slabs above current one - called during LEAVE_SCOPE */
+
+STATIC void
+S_clear_backtrack_stack(pTHX_ void *p)
+{
+ regmatch_slab *s = PL_regmatch_slab->next;
+ PERL_UNUSED_ARG(p);
+
+ if (!s)
+ return;
+ PL_regmatch_slab->next = NULL;
+ while (s) {
+ regmatch_slab * const osl = s;
+ s = s->next;
+ Safefree(osl);
+ }
+}
+
+
+#define SETREX(Re1,Re2) \
+ if (PL_reg_eval_set) PM_SETRE((PL_reg_curpm), (Re2)); \
+ Re1 = (Re2)
+
+STATIC I32 /* 0 failure, 1 success */
+S_regmatch(pTHX_ regmatch_info *reginfo, regnode *prog)
+{
+#if PERL_VERSION < 9 && !defined(PERL_CORE)
+ dMY_CXT;
+#endif
+ dVAR;
+ register const bool utf8_target = PL_reg_match_utf8;
+ const U32 uniflags = UTF8_ALLOW_DEFAULT;
+ REGEXP *rex_sv = reginfo->prog;
+ regexp *rex = (struct regexp *)SvANY(rex_sv);
+ RXi_GET_DECL(rex,rexi);
+ I32 oldsave;
+ /* the current state. This is a cached copy of PL_regmatch_state */
+ register regmatch_state *st;
+ /* cache heavy used fields of st in registers */
+ register regnode *scan;
+ register regnode *next;
+ register U32 n = 0; /* general value; init to avoid compiler warning */
+ register I32 ln = 0; /* len or last; init to avoid compiler warning */
+ register char *locinput = PL_reginput;
+ register I32 nextchr; /* is always set to UCHARAT(locinput) */
+
+ bool result = 0; /* return value of S_regmatch */
+ int depth = 0; /* depth of backtrack stack */
+ U32 nochange_depth = 0; /* depth of GOSUB recursion with nochange */
+ const U32 max_nochange_depth =
+ (3 * rex->nparens > MAX_RECURSE_EVAL_NOCHANGE_DEPTH) ?
+ 3 * rex->nparens : MAX_RECURSE_EVAL_NOCHANGE_DEPTH;
+ regmatch_state *yes_state = NULL; /* state to pop to on success of
+ subpattern */
+ /* mark_state piggy backs on the yes_state logic so that when we unwind
+ the stack on success we can update the mark_state as we go */
+ regmatch_state *mark_state = NULL; /* last mark state we have seen */
+ regmatch_state *cur_eval = NULL; /* most recent EVAL_AB state */
+ struct regmatch_state *cur_curlyx = NULL; /* most recent curlyx */
+ U32 state_num;
+ bool no_final = 0; /* prevent failure from backtracking? */
+ bool do_cutgroup = 0; /* no_final only until next branch/trie entry */
+ char *startpoint = PL_reginput;
+ SV *popmark = NULL; /* are we looking for a mark? */
+ SV *sv_commit = NULL; /* last mark name seen in failure */
+ SV *sv_yes_mark = NULL; /* last mark name we have seen
+ during a successful match */
+ U32 lastopen = 0; /* last open we saw */
+ bool has_cutgroup = RX_HAS_CUTGROUP(rex) ? 1 : 0;
+ SV* const oreplsv = GvSV(PL_replgv);
+ /* these three flags are set by various ops to signal information to
+ * the very next op. They have a useful lifetime of exactly one loop
+ * iteration, and are not preserved or restored by state pushes/pops
+ */
+ bool sw = 0; /* the condition value in (?(cond)a|b) */
+ bool minmod = 0; /* the next "{n,m}" is a "{n,m}?" */
+ int logical = 0; /* the following EVAL is:
+ 0: (?{...})
+ 1: (?(?{...})X|Y)
+ 2: (??{...})
+ or the following IFMATCH/UNLESSM is:
+ false: plain (?=foo)
+ true: used as a condition: (?(?=foo))
+ */
+#ifdef DEBUGGING
+ GET_RE_DEBUG_FLAGS_DECL;
+#endif
+
+ PERL_ARGS_ASSERT_REGMATCH;
+
+ DEBUG_OPTIMISE_r( DEBUG_EXECUTE_r({
+ PerlIO_printf(Perl_debug_log,"regmatch start\n");
+ }));
+ /* on first ever call to regmatch, allocate first slab */
+ if (!PL_regmatch_slab) {
+ Newx(PL_regmatch_slab, 1, regmatch_slab);
+ PL_regmatch_slab->prev = NULL;
+ PL_regmatch_slab->next = NULL;
+ PL_regmatch_state = SLAB_FIRST(PL_regmatch_slab);
+ }
+
+ oldsave = PL_savestack_ix;
+ SAVEDESTRUCTOR_X(S_clear_backtrack_stack, NULL);
+ SAVEVPTR(PL_regmatch_slab);
+ SAVEVPTR(PL_regmatch_state);
+
+ /* grab next free state slot */
+ st = ++PL_regmatch_state;
+ if (st > SLAB_LAST(PL_regmatch_slab))
+ st = PL_regmatch_state = S_push_slab(aTHX);
+
+ /* Note that nextchr is a byte even in UTF */
+ nextchr = UCHARAT(locinput);
+ scan = prog;
+ while (scan != NULL) {
+
+ DEBUG_EXECUTE_r( {
+ SV * const prop = sv_newmortal();
+ regnode *rnext=regnext(scan);
+ DUMP_EXEC_POS( locinput, scan, utf8_target );
+ regprop(rex, prop, scan);
+
+ PerlIO_printf(Perl_debug_log,
+ "%3"IVdf":%*s%s(%"IVdf")\n",
+ (IV)(scan - rexi->program), depth*2, "",
+ SvPVX_const(prop),
+ (PL_regkind[OP(scan)] == END || !rnext) ?
+ 0 : (IV)(rnext - rexi->program));
+ });
+
+ next = scan + NEXT_OFF(scan);
+ if (next == scan)
+ next = NULL;
+ state_num = OP(scan);
+
+ REH_CALL_EXEC_NODE_HOOK(rex, scan, reginfo, st);
+ reenter_switch:
+
+ assert(PL_reglastparen == &rex->lastparen);
+ assert(PL_reglastcloseparen == &rex->lastcloseparen);
+ assert(PL_regoffs == rex->offs);
+
+ switch (state_num) {
+ case BOL:
+ if (locinput == PL_bostr)
+ {
+ /* reginfo->till = reginfo->bol; */
+ break;
+ }
+ sayNO;
+ case MBOL:
+ if (locinput == PL_bostr ||
+ ((nextchr || locinput < PL_regeol) && locinput[-1] == '\n'))
+ {
+ break;
+ }
+ sayNO;
+ case SBOL:
+ if (locinput == PL_bostr)
+ break;
+ sayNO;
+ case GPOS:
+ if (locinput == reginfo->ganch)
+ break;
+ sayNO;
+
+ case KEEPS:
+ /* update the startpoint */
+ st->u.keeper.val = PL_regoffs[0].start;
+ PL_reginput = locinput;
+ PL_regoffs[0].start = locinput - PL_bostr;
+ PUSH_STATE_GOTO(KEEPS_next, next);
+ /*NOT-REACHED*/
+ case KEEPS_next_fail:
+ /* rollback the start point change */
+ PL_regoffs[0].start = st->u.keeper.val;
+ sayNO_SILENT;
+ /*NOT-REACHED*/
+ case EOL:
+ goto seol;
+ case MEOL:
+ if ((nextchr || locinput < PL_regeol) && nextchr != '\n')
+ sayNO;
+ break;
+ case SEOL:
+ seol:
+ if ((nextchr || locinput < PL_regeol) && nextchr != '\n')
+ sayNO;
+ if (PL_regeol - locinput > 1)
+ sayNO;
+ break;
+ case EOS:
+ if (PL_regeol != locinput)
+ sayNO;
+ break;
+ case SANY:
+ if (!nextchr && locinput >= PL_regeol)
+ sayNO;
+ if (utf8_target) {
+ locinput += PL_utf8skip[nextchr];
+ if (locinput > PL_regeol)
+ sayNO;
+ nextchr = UCHARAT(locinput);
+ }
+ else
+ nextchr = UCHARAT(++locinput);
+ break;
+ case CANY:
+ if (!nextchr && locinput >= PL_regeol)
+ sayNO;
+ nextchr = UCHARAT(++locinput);
+ break;
+ case REG_ANY:
+ if ((!nextchr && locinput >= PL_regeol) || nextchr == '\n')
+ sayNO;
+ if (utf8_target) {
+ locinput += PL_utf8skip[nextchr];
+ if (locinput > PL_regeol)
+ sayNO;
+ nextchr = UCHARAT(locinput);
+ }
+ else
+ nextchr = UCHARAT(++locinput);
+ break;
+
+#undef ST
+#define ST st->u.trie
+ case TRIEC:
+ /* In this case the charclass data is available inline so
+ we can fail fast without a lot of extra overhead.
+ */
+ if(!ANYOF_BITMAP_TEST(scan, *locinput)) {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %sfailed to match trie start class...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
+ );
+ sayNO_SILENT;
+ /* NOTREACHED */
+ }
+ /* FALL THROUGH */
+ case TRIE:
+ /* the basic plan of execution of the trie is:
+ * At the beginning, run though all the states, and
+ * find the longest-matching word. Also remember the position
+ * of the shortest matching word. For example, this pattern:
+ * 1 2 3 4 5
+ * ab|a|x|abcd|abc
+ * when matched against the string "abcde", will generate
+ * accept states for all words except 3, with the longest
+ * matching word being 4, and the shortest being 1 (with
+ * the position being after char 1 of the string).
+ *
+ * Then for each matching word, in word order (i.e. 1,2,4,5),
+ * we run the remainder of the pattern; on each try setting
+ * the current position to the character following the word,
+ * returning to try the next word on failure.
+ *
+ * We avoid having to build a list of words at runtime by
+ * using a compile-time structure, wordinfo[].prev, which
+ * gives, for each word, the previous accepting word (if any).
+ * In the case above it would contain the mappings 1->2, 2->0,
+ * 3->0, 4->5, 5->1. We can use this table to generate, from
+ * the longest word (4 above), a list of all words, by
+ * following the list of prev pointers; this gives us the
+ * unordered list 4,5,1,2. Then given the current word we have
+ * just tried, we can go through the list and find the
+ * next-biggest word to try (so if we just failed on word 2,
+ * the next in the list is 4).
+ *
+ * Since at runtime we don't record the matching position in
+ * the string for each word, we have to work that out for
+ * each word we're about to process. The wordinfo table holds
+ * the character length of each word; given that we recorded
+ * at the start: the position of the shortest word and its
+ * length in chars, we just need to move the pointer the
+ * difference between the two char lengths. Depending on
+ * Unicode status and folding, that's cheap or expensive.
+ *
+ * This algorithm is optimised for the case where are only a
+ * small number of accept states, i.e. 0,1, or maybe 2.
+ * With lots of accepts states, and having to try all of them,
+ * it becomes quadratic on number of accept states to find all
+ * the next words.
+ */
+
+ {
+ /* what type of TRIE am I? (utf8 makes this contextual) */
+ DECL_TRIE_TYPE(scan);
+
+ /* what trie are we using right now */
+ reg_trie_data * const trie
+ = (reg_trie_data*)rexi->data->data[ ARG( scan ) ];
+ HV * widecharmap = MUTABLE_HV(rexi->data->data[ ARG( scan ) + 1 ]);
+ U32 state = trie->startstate;
+
+ if (trie->bitmap && !TRIE_BITMAP_TEST(trie,*locinput) ) {
+ if (trie->states[ state ].wordnum) {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %smatched empty string...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
+ );
+ if (!trie->jump)
+ break;
+ } else {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %sfailed to match trie start class...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
+ );
+ sayNO_SILENT;
+ }
+ }
+
+ {
+ U8 *uc = ( U8* )locinput;
+
+ STRLEN len = 0;
+ STRLEN foldlen = 0;
+ U8 *uscan = (U8*)NULL;
+ U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
+ U32 charcount = 0; /* how many input chars we have matched */
+ U32 accepted = 0; /* have we seen any accepting states? */
+
+ ST.B = next;
+ ST.jump = trie->jump;
+ ST.me = scan;
+ ST.firstpos = NULL;
+ ST.longfold = FALSE; /* char longer if folded => it's harder */
+ ST.nextword = 0;
+
+ /* fully traverse the TRIE; note the position of the
+ shortest accept state and the wordnum of the longest
+ accept state */
+
+ while ( state && uc <= (U8*)PL_regeol ) {
+ U32 base = trie->states[ state ].trans.base;
+ UV uvc = 0;
+ U16 charid = 0;
+ U16 wordnum;
+ wordnum = trie->states[ state ].wordnum;
+
+ if (wordnum) { /* it's an accept state */
+ if (!accepted) {
+ accepted = 1;
+ /* record first match position */
+ if (ST.longfold) {
+ ST.firstpos = (U8*)locinput;
+ ST.firstchars = 0;
+ }
+ else {
+ ST.firstpos = uc;
+ ST.firstchars = charcount;
+ }
+ }
+ if (!ST.nextword || wordnum < ST.nextword)
+ ST.nextword = wordnum;
+ ST.topword = wordnum;
+ }
+
+ DEBUG_TRIE_EXECUTE_r({
+ DUMP_EXEC_POS( (char *)uc, scan, utf8_target );
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sState: %4"UVxf" Accepted: %c ",
+ 2+depth * 2, "", PL_colors[4],
+ (UV)state, (accepted ? 'Y' : 'N'));
+ });
+
+ /* read a char and goto next state */
+ if ( base ) {
+ I32 offset;
+ REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc,
+ uscan, len, uvc, charid, foldlen,
+ foldbuf, uniflags);
+ charcount++;
+ if (foldlen>0)
+ ST.longfold = TRUE;
+ if (charid &&
+ ( ((offset =
+ base + charid - 1 - trie->uniquecharcount)) >= 0)
+
+ && ((U32)offset < trie->lasttrans)
+ && trie->trans[offset].check == state)
+ {
+ state = trie->trans[offset].next;
+ }
+ else {
+ state = 0;
+ }
+ uc += len;
+
+ }
+ else {
+ state = 0;
+ }
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log,
+ "Charid:%3x CP:%4"UVxf" After State: %4"UVxf"%s\n",
+ charid, uvc, (UV)state, PL_colors[5] );
+ );
+ }
+ if (!accepted)
+ sayNO;
+
+ /* calculate total number of accept states */
+ {
+ U16 w = ST.topword;
+ accepted = 0;
+ while (w) {
+ w = trie->wordinfo[w].prev;
+ accepted++;
+ }
+ ST.accepted = accepted;
+ }
+
+ DEBUG_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sgot %"IVdf" possible matches%s\n",
+ REPORT_CODE_OFF + depth * 2, "",
+ PL_colors[4], (IV)ST.accepted, PL_colors[5] );
+ );
+ goto trie_first_try; /* jump into the fail handler */
+ }}
+ /* NOTREACHED */
+
+ case TRIE_next_fail: /* we failed - try next alternative */
+ if ( ST.jump) {
+ REGCP_UNWIND(ST.cp);
+ for (n = *PL_reglastparen; n > ST.lastparen; n--)
+ PL_regoffs[n].end = -1;
+ *PL_reglastparen = n;
+ }
+ if (!--ST.accepted) {
+ DEBUG_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sTRIE failed...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4],
+ PL_colors[5] );
+ });
+ sayNO_SILENT;
+ }
+ {
+ /* Find next-highest word to process. Note that this code
+ * is O(N^2) per trie run (O(N) per branch), so keep tight */
+ register U16 min = 0;
+ register U16 word;
+ register U16 const nextword = ST.nextword;
+ register reg_trie_wordinfo * const wordinfo
+ = ((reg_trie_data*)rexi->data->data[ARG(ST.me)])->wordinfo;
+ for (word=ST.topword; word; word=wordinfo[word].prev) {
+ if (word > nextword && (!min || word < min))
+ min = word;
+ }
+ ST.nextword = min;
+ }
+
+ trie_first_try:
+ if (do_cutgroup) {
+ do_cutgroup = 0;
+ no_final = 0;
+ }
+
+ if ( ST.jump) {
+ ST.lastparen = *PL_reglastparen;
+ REGCP_SET(ST.cp);
+ }
+
+ /* find start char of end of current word */
+ {
+ U32 chars; /* how many chars to skip */
+ U8 *uc = ST.firstpos;
+ reg_trie_data * const trie
+ = (reg_trie_data*)rexi->data->data[ARG(ST.me)];
+
+ assert((trie->wordinfo[ST.nextword].len - trie->prefixlen)
+ >= ST.firstchars);
+ chars = (trie->wordinfo[ST.nextword].len - trie->prefixlen)
+ - ST.firstchars;
+
+ if (ST.longfold) {
+ /* the hard option - fold each char in turn and find
+ * its folded length (which may be different */
+ U8 foldbuf[UTF8_MAXBYTES_CASE + 1];
+ STRLEN foldlen;
+ STRLEN len;
+ UV uvc;
+ U8 *uscan;
+
+ while (chars) {
+ if (utf8_target) {
+ uvc = utf8n_to_uvuni((U8*)uc, UTF8_MAXLEN, &len,
+ uniflags);
+ uc += len;
+ }
+ else {
+ uvc = *uc;
+ uc++;
+ }
+ uvc = to_uni_fold(uvc, foldbuf, &foldlen);
+ uscan = foldbuf;
+ while (foldlen) {
+ if (!--chars)
+ break;
+ uvc = utf8n_to_uvuni(uscan, UTF8_MAXLEN, &len,
+ uniflags);
+ uscan += len;
+ foldlen -= len;
+ }
+ }
+ }
+ else {
+ if (utf8_target)
+ while (chars--)
+ uc += UTF8SKIP(uc);
+ else
+ uc += chars;
+ }
+ PL_reginput = (char *)uc;
+ }
+
+ scan = (ST.jump && ST.jump[ST.nextword])
+ ? ST.me + ST.jump[ST.nextword]
+ : ST.B;
+
+ DEBUG_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sTRIE matched word #%d, continuing%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4],
+ ST.nextword,
+ PL_colors[5]
+ );
+ });
+
+ if (ST.accepted > 1 || has_cutgroup) {
+ PUSH_STATE_GOTO(TRIE_next, scan);
+ /* NOTREACHED */
+ }
+ /* only one choice left - just continue */
+ DEBUG_EXECUTE_r({
+ AV *const trie_words
+ = MUTABLE_AV(rexi->data->data[ARG(ST.me)+TRIE_WORDS_OFFSET]);
+ SV ** const tmp = av_fetch( trie_words,
+ ST.nextword-1, 0 );
+ SV *sv= tmp ? sv_newmortal() : NULL;
+
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sonly one match left, short-circuiting: #%d <%s>%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4],
+ ST.nextword,
+ tmp ? pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 0,
+ PL_colors[0], PL_colors[1],
+ (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0)|PERL_PV_ESCAPE_NONASCII
+ )
+ : "not compiled under -Dr",
+ PL_colors[5] );
+ });
+
+ locinput = PL_reginput;
+ nextchr = UCHARAT(locinput);
+ continue; /* execute rest of RE */
+ /* NOTREACHED */
+#undef ST
+
+ case EXACT: {
+ char *s = STRING(scan);
+ ln = STR_LEN(scan);
+ if (utf8_target != UTF_PATTERN) {
+ /* The target and the pattern have differing utf8ness. */
+ char *l = locinput;
+ const char * const e = s + ln;
+
+ if (utf8_target) {
+ /* The target is utf8, the pattern is not utf8. */
+ while (s < e) {
+ STRLEN ulen;
+ if (l >= PL_regeol)
+ sayNO;
+ if (NATIVE_TO_UNI(*(U8*)s) !=
+ utf8n_to_uvuni((U8*)l, UTF8_MAXBYTES, &ulen,
+ uniflags))
+ sayNO;
+ l += ulen;
+ s ++;
+ }
+ }
+ else {
+ /* The target is not utf8, the pattern is utf8. */
+ while (s < e) {
+ STRLEN ulen;
+ if (l >= PL_regeol)
+ sayNO;
+ if (NATIVE_TO_UNI(*((U8*)l)) !=
+ utf8n_to_uvuni((U8*)s, UTF8_MAXBYTES, &ulen,
+ uniflags))
+ sayNO;
+ s += ulen;
+ l ++;
+ }
+ }
+ locinput = l;
+ nextchr = UCHARAT(locinput);
+ break;
+ }
+ /* The target and the pattern have the same utf8ness. */
+ /* Inline the first character, for speed. */
+ if (UCHARAT(s) != nextchr)
+ sayNO;
+ if (PL_regeol - locinput < ln)
+ sayNO;
+ if (ln > 1 && memNE(s, locinput, ln))
+ sayNO;
+ locinput += ln;
+ nextchr = UCHARAT(locinput);
+ break;
+ }
+ case EXACTFL: {
+ re_fold_t folder;
+ const U8 * fold_array;
+ const char * s;
+ U32 fold_utf8_flags;
+
+ PL_reg_flags |= RF_tainted;
+ folder = foldEQ_locale;
+ fold_array = PL_fold_locale;
+ fold_utf8_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_exactf;
+
+ case EXACTFU_SS:
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU:
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ fold_utf8_flags = (UTF_PATTERN) ? FOLDEQ_S1_ALREADY_FOLDED : 0;
+ goto do_exactf;
+
+ case EXACTFA:
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ fold_utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_exactf;
+
+ case EXACTF:
+ folder = foldEQ;
+ fold_array = PL_fold;
+ fold_utf8_flags = 0;
+
+ do_exactf:
+ s = STRING(scan);
+ ln = STR_LEN(scan);
+
+ if (utf8_target || UTF_PATTERN || state_num == EXACTFU_SS) {
+ /* Either target or the pattern are utf8, or has the issue where
+ * the fold lengths may differ. */
+ const char * const l = locinput;
+ char *e = PL_regeol;
+
+ if (! foldEQ_utf8_flags(s, 0, ln, cBOOL(UTF_PATTERN),
+ l, &e, 0, utf8_target, fold_utf8_flags))
+ {
+ sayNO;
+ }
+ locinput = e;
+ nextchr = UCHARAT(locinput);
+ break;
+ }
+
+ /* Neither the target nor the pattern are utf8 */
+ if (UCHARAT(s) != nextchr &&
+ UCHARAT(s) != fold_array[nextchr])
+ {
+ sayNO;
+ }
+ if (PL_regeol - locinput < ln)
+ sayNO;
+ if (ln > 1 && ! folder(s, locinput, ln))
+ sayNO;
+ locinput += ln;
+ nextchr = UCHARAT(locinput);
+ break;
+ }
+
+ /* XXX Could improve efficiency by separating these all out using a
+ * macro or in-line function. At that point regcomp.c would no longer
+ * have to set the FLAGS fields of these */
+ case BOUNDL:
+ case NBOUNDL:
+ PL_reg_flags |= RF_tainted;
+ /* FALL THROUGH */
+ case BOUND:
+ case BOUNDU:
+ case BOUNDA:
+ case NBOUND:
+ case NBOUNDU:
+ case NBOUNDA:
+ /* was last char in word? */
+ if (utf8_target
+ && FLAGS(scan) != REGEX_ASCII_RESTRICTED_CHARSET
+ && FLAGS(scan) != REGEX_ASCII_MORE_RESTRICTED_CHARSET)
+ {
+ if (locinput == PL_bostr)
+ ln = '\n';
+ else {
+ const U8 * const r = reghop3((U8*)locinput, -1, (U8*)PL_bostr);
+
+ ln = utf8n_to_uvchr(r, UTF8SKIP(r), 0, uniflags);
+ }
+ if (FLAGS(scan) != REGEX_LOCALE_CHARSET) {
+ ln = isALNUM_uni(ln);
+ LOAD_UTF8_CHARCLASS_ALNUM();
+ n = swash_fetch(PL_utf8_alnum, (U8*)locinput, utf8_target);
+ }
+ else {
+ ln = isALNUM_LC_uvchr(UNI_TO_NATIVE(ln));
+ n = isALNUM_LC_utf8((U8*)locinput);
+ }
+ }
+ else {
+
+ /* Here the string isn't utf8, or is utf8 and only ascii
+ * characters are to match \w. In the latter case looking at
+ * the byte just prior to the current one may be just the final
+ * byte of a multi-byte character. This is ok. There are two
+ * cases:
+ * 1) it is a single byte character, and then the test is doing
+ * just what it's supposed to.
+ * 2) it is a multi-byte character, in which case the final
+ * byte is never mistakable for ASCII, and so the test
+ * will say it is not a word character, which is the
+ * correct answer. */
+ ln = (locinput != PL_bostr) ?
+ UCHARAT(locinput - 1) : '\n';
+ switch (FLAGS(scan)) {
+ case REGEX_UNICODE_CHARSET:
+ ln = isWORDCHAR_L1(ln);
+ n = isWORDCHAR_L1(nextchr);
+ break;
+ case REGEX_LOCALE_CHARSET:
+ ln = isALNUM_LC(ln);
+ n = isALNUM_LC(nextchr);
+ break;
+ case REGEX_DEPENDS_CHARSET:
+ ln = isALNUM(ln);
+ n = isALNUM(nextchr);
+ break;
+ case REGEX_ASCII_RESTRICTED_CHARSET:
+ case REGEX_ASCII_MORE_RESTRICTED_CHARSET:
+ ln = isWORDCHAR_A(ln);
+ n = isWORDCHAR_A(nextchr);
+ break;
+ default:
+ Perl_croak(aTHX_ "panic: Unexpected FLAGS %u in op %u", FLAGS(scan), OP(scan));
+ break;
+ }
+ }
+ /* Note requires that all BOUNDs be lower than all NBOUNDs in
+ * regcomp.sym */
+ if (((!ln) == (!n)) == (OP(scan) < NBOUND))
+ sayNO;
+ break;
+ case ANYOFV:
+ case ANYOF:
+ if (utf8_target || state_num == ANYOFV) {
+ STRLEN inclasslen = PL_regeol - locinput;
+ if (locinput >= PL_regeol)
+ sayNO;
+
+ if (!reginclass(rex, scan, (U8*)locinput, &inclasslen, utf8_target))
+ sayNO;
+ locinput += inclasslen;
+ nextchr = UCHARAT(locinput);
+ break;
+ }
+ else {
+ if (nextchr < 0)
+ nextchr = UCHARAT(locinput);
+ if (!nextchr && locinput >= PL_regeol)
+ sayNO;
+ if (!REGINCLASS(rex, scan, (U8*)locinput))
+ sayNO;
+ nextchr = UCHARAT(++locinput);
+ break;
+ }
+ break;
+ /* Special char classes - The defines start on line 129 or so */
+ CCC_TRY_U(ALNUM, NALNUM, isWORDCHAR,
+ ALNUML, NALNUML, isALNUM_LC, isALNUM_LC_utf8,
+ ALNUMU, NALNUMU, isWORDCHAR_L1,
+ ALNUMA, NALNUMA, isWORDCHAR_A,
+ alnum, "a");
+
+ CCC_TRY_U(SPACE, NSPACE, isSPACE,
+ SPACEL, NSPACEL, isSPACE_LC, isSPACE_LC_utf8,
+ SPACEU, NSPACEU, isSPACE_L1,
+ SPACEA, NSPACEA, isSPACE_A,
+ space, " ");
+
+ CCC_TRY(DIGIT, NDIGIT, isDIGIT,
+ DIGITL, NDIGITL, isDIGIT_LC, isDIGIT_LC_utf8,
+ DIGITA, NDIGITA, isDIGIT_A,
+ digit, "0");
+
+ case CLUMP: /* Match \X: logical Unicode character. This is defined as
+ a Unicode extended Grapheme Cluster */
+ /* From http://www.unicode.org/reports/tr29 (5.2 version). An
+ extended Grapheme Cluster is:
+
+ CR LF
+ | Prepend* Begin Extend*
+ | .
+
+ Begin is (Hangul-syllable | ! Control)
+ Extend is (Grapheme_Extend | Spacing_Mark)
+ Control is [ GCB_Control CR LF ]
+
+ The discussion below shows how the code for CLUMP is derived
+ from this regex. Note that most of these concepts are from
+ property values of the Grapheme Cluster Boundary (GCB) property.
+ No code point can have multiple property values for a given
+ property. Thus a code point in Prepend can't be in Control, but
+ it must be in !Control. This is why Control above includes
+ GCB_Control plus CR plus LF. The latter two are used in the GCB
+ property separately, and so can't be in GCB_Control, even though
+ they logically are controls. Control is not the same as gc=cc,
+ but includes format and other characters as well.
+
+ The Unicode definition of Hangul-syllable is:
+ L+
+ | (L* ( ( V | LV ) V* | LVT ) T*)
+ | T+
+ )
+ Each of these is a value for the GCB property, and hence must be
+ disjoint, so the order they are tested is immaterial, so the
+ above can safely be changed to
+ T+
+ | L+
+ | (L* ( LVT | ( V | LV ) V*) T*)
+
+ The last two terms can be combined like this:
+ L* ( L
+ | (( LVT | ( V | LV ) V*) T*))
+
+ And refactored into this:
+ L* (L | LVT T* | V V* T* | LV V* T*)
+
+ That means that if we have seen any L's at all we can quit
+ there, but if the next character is an LVT, a V, or an LV we
+ should keep going.
+
+ There is a subtlety with Prepend* which showed up in testing.
+ Note that the Begin, and only the Begin is required in:
+ | Prepend* Begin Extend*
+ Also, Begin contains '! Control'. A Prepend must be a
+ '! Control', which means it must also be a Begin. What it
+ comes down to is that if we match Prepend* and then find no
+ suitable Begin afterwards, that if we backtrack the last
+ Prepend, that one will be a suitable Begin.
+ */
+
+ if (locinput >= PL_regeol)
+ sayNO;
+ if (! utf8_target) {
+
+ /* Match either CR LF or '.', as all the other possibilities
+ * require utf8 */
+ locinput++; /* Match the . or CR */
+ if (nextchr == '\r' /* And if it was CR, and the next is LF,
+ match the LF */
+ && locinput < PL_regeol
+ && UCHARAT(locinput) == '\n') locinput++;
+ }
+ else {
+
+ /* Utf8: See if is ( CR LF ); already know that locinput <
+ * PL_regeol, so locinput+1 is in bounds */
+ if (nextchr == '\r' && UCHARAT(locinput + 1) == '\n') {
+ locinput += 2;
+ }
+ else {
+ /* In case have to backtrack to beginning, then match '.' */
+ char *starting = locinput;
+
+ /* In case have to backtrack the last prepend */
+ char *previous_prepend = 0;
+
+ LOAD_UTF8_CHARCLASS_GCB();
+
+ /* Match (prepend)* */
+ while (locinput < PL_regeol
+ && swash_fetch(PL_utf8_X_prepend,
+ (U8*)locinput, utf8_target))
+ {
+ previous_prepend = locinput;
+ locinput += UTF8SKIP(locinput);
+ }
+
+ /* As noted above, if we matched a prepend character, but
+ * the next thing won't match, back off the last prepend we
+ * matched, as it is guaranteed to match the begin */
+ if (previous_prepend
+ && (locinput >= PL_regeol
+ || ! swash_fetch(PL_utf8_X_begin,
+ (U8*)locinput, utf8_target)))
+ {
+ locinput = previous_prepend;
+ }
+
+ /* Note that here we know PL_regeol > locinput, as we
+ * tested that upon input to this switch case, and if we
+ * moved locinput forward, we tested the result just above
+ * and it either passed, or we backed off so that it will
+ * now pass */
+ if (! swash_fetch(PL_utf8_X_begin, (U8*)locinput, utf8_target)) {
+
+ /* Here did not match the required 'Begin' in the
+ * second term. So just match the very first
+ * character, the '.' of the final term of the regex */
+ locinput = starting + UTF8SKIP(starting);
+ } else {
+
+ /* Here is the beginning of a character that can have
+ * an extender. It is either a hangul syllable, or a
+ * non-control */
+ if (swash_fetch(PL_utf8_X_non_hangul,
+ (U8*)locinput, utf8_target))
+ {
+
+ /* Here not a Hangul syllable, must be a
+ * ('! * Control') */
+ locinput += UTF8SKIP(locinput);
+ } else {
+
+ /* Here is a Hangul syllable. It can be composed
+ * of several individual characters. One
+ * possibility is T+ */
+ if (swash_fetch(PL_utf8_X_T,
+ (U8*)locinput, utf8_target))
+ {
+ while (locinput < PL_regeol
+ && swash_fetch(PL_utf8_X_T,
+ (U8*)locinput, utf8_target))
+ {
+ locinput += UTF8SKIP(locinput);
+ }
+ } else {
+
+ /* Here, not T+, but is a Hangul. That means
+ * it is one of the others: L, LV, LVT or V,
+ * and matches:
+ * L* (L | LVT T* | V V* T* | LV V* T*) */
+
+ /* Match L* */
+ while (locinput < PL_regeol
+ && swash_fetch(PL_utf8_X_L,
+ (U8*)locinput, utf8_target))
+ {
+ locinput += UTF8SKIP(locinput);
+ }
+
+ /* Here, have exhausted L*. If the next
+ * character is not an LV, LVT nor V, it means
+ * we had to have at least one L, so matches L+
+ * in the original equation, we have a complete
+ * hangul syllable. Are done. */
+
+ if (locinput < PL_regeol
+ && swash_fetch(PL_utf8_X_LV_LVT_V,
+ (U8*)locinput, utf8_target))
+ {
+
+ /* Otherwise keep going. Must be LV, LVT
+ * or V. See if LVT */
+ if (swash_fetch(PL_utf8_X_LVT,
+ (U8*)locinput, utf8_target))
+ {
+ locinput += UTF8SKIP(locinput);
+ } else {
+
+ /* Must be V or LV. Take it, then
+ * match V* */
+ locinput += UTF8SKIP(locinput);
+ while (locinput < PL_regeol
+ && swash_fetch(PL_utf8_X_V,
+ (U8*)locinput, utf8_target))
+ {
+ locinput += UTF8SKIP(locinput);
+ }
+ }
+
+ /* And any of LV, LVT, or V can be followed
+ * by T* */
+ while (locinput < PL_regeol
+ && swash_fetch(PL_utf8_X_T,
+ (U8*)locinput,
+ utf8_target))
+ {
+ locinput += UTF8SKIP(locinput);
+ }
+ }
+ }
+ }
+
+ /* Match any extender */
+ while (locinput < PL_regeol
+ && swash_fetch(PL_utf8_X_extend,
+ (U8*)locinput, utf8_target))
+ {
+ locinput += UTF8SKIP(locinput);
+ }
+ }
+ }
+ if (locinput > PL_regeol) sayNO;
+ }
+ nextchr = UCHARAT(locinput);
+ break;
+
+ case NREFFL:
+ { /* The capture buffer cases. The ones beginning with N for the
+ named buffers just convert to the equivalent numbered and
+ pretend they were called as the corresponding numbered buffer
+ op. */
+ /* don't initialize these in the declaration, it makes C++
+ unhappy */
+ char *s;
+ char type;
+ re_fold_t folder;
+ const U8 *fold_array;
+ UV utf8_fold_flags;
+
+ PL_reg_flags |= RF_tainted;
+ folder = foldEQ_locale;
+ fold_array = PL_fold_locale;
+ type = REFFL;
+ utf8_fold_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_nref;
+
+ case NREFFA:
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ type = REFFA;
+ utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_nref;
+
+ case NREFFU:
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ type = REFFU;
+ utf8_fold_flags = 0;
+ goto do_nref;
+
+ case NREFF:
+ folder = foldEQ;
+ fold_array = PL_fold;
+ type = REFF;
+ utf8_fold_flags = 0;
+ goto do_nref;
+
+ case NREF:
+ type = REF;
+ folder = NULL;
+ fold_array = NULL;
+ utf8_fold_flags = 0;
+ do_nref:
+
+ /* For the named back references, find the corresponding buffer
+ * number */
+ n = reg_check_named_buff_matched(rex,scan);
+
+ if ( ! n ) {
+ sayNO;
+ }
+ goto do_nref_ref_common;
+
+ case REFFL:
+ PL_reg_flags |= RF_tainted;
+ folder = foldEQ_locale;
+ fold_array = PL_fold_locale;
+ utf8_fold_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_ref;
+
+ case REFFA:
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_ref;
+
+ case REFFU:
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ utf8_fold_flags = 0;
+ goto do_ref;
+
+ case REFF:
+ folder = foldEQ;
+ fold_array = PL_fold;
+ utf8_fold_flags = 0;
+ goto do_ref;
+
+ case REF:
+ folder = NULL;
+ fold_array = NULL;
+ utf8_fold_flags = 0;
+
+ do_ref:
+ type = OP(scan);
+ n = ARG(scan); /* which paren pair */
+
+ do_nref_ref_common:
+ ln = PL_regoffs[n].start;
+ PL_reg_leftiter = PL_reg_maxiter; /* Void cache */
+ if (*PL_reglastparen < n || ln == -1)
+ sayNO; /* Do not match unless seen CLOSEn. */
+ if (ln == PL_regoffs[n].end)
+ break;
+
+ s = PL_bostr + ln;
+ if (type != REF /* REF can do byte comparison */
+ && (utf8_target || type == REFFU))
+ { /* XXX handle REFFL better */
+ char * limit = PL_regeol;
+
+ /* This call case insensitively compares the entire buffer
+ * at s, with the current input starting at locinput, but
+ * not going off the end given by PL_regeol, and returns in
+ * limit upon success, how much of the current input was
+ * matched */
+ if (! foldEQ_utf8_flags(s, NULL, PL_regoffs[n].end - ln, utf8_target,
+ locinput, &limit, 0, utf8_target, utf8_fold_flags))
+ {
+ sayNO;
+ }
+ locinput = limit;
+ nextchr = UCHARAT(locinput);
+ break;
+ }
+
+ /* Not utf8: Inline the first character, for speed. */
+ if (UCHARAT(s) != nextchr &&
+ (type == REF ||
+ UCHARAT(s) != fold_array[nextchr]))
+ sayNO;
+ ln = PL_regoffs[n].end - ln;
+ if (locinput + ln > PL_regeol)
+ sayNO;
+ if (ln > 1 && (type == REF
+ ? memNE(s, locinput, ln)
+ : ! folder(s, locinput, ln)))
+ sayNO;
+ locinput += ln;
+ nextchr = UCHARAT(locinput);
+ break;
+ }
+ case NOTHING:
+ case TAIL:
+ break;
+ case BACK:
+ break;
+
+#undef ST
+#define ST st->u.eval
+ {
+ SV *ret;
+ REGEXP *re_sv;
+ regexp *re;
+ regexp_internal *rei;
+ regnode *startpoint;
+
+ case GOSTART:
+ case GOSUB: /* /(...(?1))/ /(...(?&foo))/ */
+ if (cur_eval && cur_eval->locinput==locinput) {
+ if (cur_eval->u.eval.close_paren == (U32)ARG(scan))
+ Perl_croak(aTHX_ "Infinite recursion in regex");
+ if ( ++nochange_depth > max_nochange_depth )
+ Perl_croak(aTHX_
+ "Pattern subroutine nesting without pos change"
+ " exceeded limit in regex");
+ } else {
+ nochange_depth = 0;
+ }
+ re_sv = rex_sv;
+ re = rex;
+ rei = rexi;
+ (void)ReREFCNT_inc(rex_sv);
+ if (OP(scan)==GOSUB) {
+ startpoint = scan + ARG2L(scan);
+ ST.close_paren = ARG(scan);
+ } else {
+ startpoint = rei->program+1;
+ ST.close_paren = 0;
+ }
+ goto eval_recurse_doit;
+ /* NOTREACHED */
+ case EVAL: /* /(?{A})B/ /(??{A})B/ and /(?(?{A})X|Y)B/ */
+ if (cur_eval && cur_eval->locinput==locinput) {
+ if ( ++nochange_depth > max_nochange_depth )
+ Perl_croak(aTHX_ "EVAL without pos change exceeded limit in regex");
+ } else {
+ nochange_depth = 0;
+ }
+ {
+ /* execute the code in the {...} */
+ dSP;
+ SV ** const before = SP;
+ OP_4tree * const oop = PL_op;
+ COP * const ocurcop = PL_curcop;
+ PAD *old_comppad;
+ char *saved_regeol = PL_regeol;
+ struct re_save_state saved_state;
+
+ /* To not corrupt the existing regex state while executing the
+ * eval we would normally put it on the save stack, like with
+ * save_re_context. However, re-evals have a weird scoping so we
+ * can't just add ENTER/LEAVE here. With that, things like
+ *
+ * (?{$a=2})(a(?{local$a=$a+1}))*aak*c(?{$b=$a})
+ *
+ * would break, as they expect the localisation to be unwound
+ * only when the re-engine backtracks through the bit that
+ * localised it.
+ *
+ * What we do instead is just saving the state in a local c
+ * variable.
+ */
+ Copy(&PL_reg_state, &saved_state, 1, struct re_save_state);
+
+ n = ARG(scan);
+ PL_op = (OP_4tree*)rexi->data->data[n];
+ DEBUG_STATE_r( PerlIO_printf(Perl_debug_log,
+ " re_eval 0x%"UVxf"\n", PTR2UV(PL_op)) );
+ /* wrap the call in two SAVECOMPPADs. This ensures that
+ * when the save stack is eventually unwound, all the
+ * accumulated SAVEt_CLEARSV's will be processed with
+ * interspersed SAVEt_COMPPAD's to ensure that lexicals
+ * are cleared in the right pad */
+ SAVECOMPPAD();
+ PAD_SAVE_LOCAL(old_comppad, (PAD*)rexi->data->data[n + 2]);
+ PL_regoffs[0].end = PL_reg_magic->mg_len = locinput - PL_bostr;
+
+ if (sv_yes_mark) {
+ SV *sv_mrk = get_sv("REGMARK", 1);
+ sv_setsv(sv_mrk, sv_yes_mark);
+ }
+
+ CALLRUNOPS(aTHX); /* Scalar context. */
+ SPAGAIN;
+ if (SP == before)
+ ret = &PL_sv_undef; /* protect against empty (?{}) blocks. */
+ else {
+ ret = POPs;
+ PUTBACK;
+ }
+
+ Copy(&saved_state, &PL_reg_state, 1, struct re_save_state);
+
+ PL_op = oop;
+ SAVECOMPPAD();
+ PAD_RESTORE_LOCAL(old_comppad);
+ PL_curcop = ocurcop;
+ PL_regeol = saved_regeol;
+ if (!logical) {
+ /* /(?{...})/ */
+ sv_setsv(save_scalar(PL_replgv), ret);
+ break;
+ }
+ }
+ if (logical == 2) { /* Postponed subexpression: /(??{...})/ */
+ logical = 0;
+ {
+ /* extract RE object from returned value; compiling if
+ * necessary */
+ MAGIC *mg = NULL;
+ REGEXP *rx = NULL;
+
+ if (SvROK(ret)) {
+ SV *const sv = SvRV(ret);
+
+ if (SvTYPE(sv) == SVt_REGEXP) {
+ rx = (REGEXP*) sv;
+ } else if (SvSMAGICAL(sv)) {
+ mg = mg_find(sv, PERL_MAGIC_qr);
+ assert(mg);
+ }
+ } else if (SvTYPE(ret) == SVt_REGEXP) {
+ rx = (REGEXP*) ret;
+ } else if (SvSMAGICAL(ret)) {
+ if (SvGMAGICAL(ret)) {
+ /* I don't believe that there is ever qr magic
+ here. */
+ assert(!mg_find(ret, PERL_MAGIC_qr));
+ sv_unmagic(ret, PERL_MAGIC_qr);
+ }
+ else {
+ mg = mg_find(ret, PERL_MAGIC_qr);
+ /* testing suggests mg only ends up non-NULL for
+ scalars who were upgraded and compiled in the
+ else block below. In turn, this is only
+ triggered in the "postponed utf8 string" tests
+ in t/op/pat.t */
+ }
+ }
+
+ if (mg) {
+ rx = (REGEXP *) mg->mg_obj; /*XXX:dmq*/
+ assert(rx);
+ }
+ if (rx) {
+ rx = reg_temp_copy(NULL, rx);
+ }
+ else {
+ U32 pm_flags = 0;
+ const I32 osize = PL_regsize;
+
+ if (DO_UTF8(ret)) {
+ assert (SvUTF8(ret));
+ } else if (SvUTF8(ret)) {
+ /* Not doing UTF-8, despite what the SV says. Is
+ this only if we're trapped in use 'bytes'? */
+ /* Make a copy of the octet sequence, but without
+ the flag on, as the compiler now honours the
+ SvUTF8 flag on ret. */
+ STRLEN len;
+ const char *const p = SvPV(ret, len);
+ ret = newSVpvn_flags(p, len, SVs_TEMP);
+ }
+ rx = CALLREGCOMP(ret, pm_flags);
+ if (!(SvFLAGS(ret)
+ & (SVs_TEMP | SVs_PADTMP | SVf_READONLY
+ | SVs_GMG))) {
+ /* This isn't a first class regexp. Instead, it's
+ caching a regexp onto an existing, Perl visible
+ scalar. */
+ sv_magic(ret, MUTABLE_SV(rx), PERL_MAGIC_qr, 0, 0);
+ }
+ PL_regsize = osize;
+ }
+ re_sv = rx;
+ re = (struct regexp *)SvANY(rx);
+ }
+ RXp_MATCH_COPIED_off(re);
+ re->subbeg = rex->subbeg;
+ re->sublen = rex->sublen;
+ rei = RXi_GET(re);
+ DEBUG_EXECUTE_r(
+ debug_start_match(re_sv, utf8_target, locinput, PL_regeol,
+ "Matching embedded");
+ );
+ startpoint = rei->program + 1;
+ ST.close_paren = 0; /* only used for GOSUB */
+ /* borrowed from regtry */
+ if (PL_reg_start_tmpl <= re->nparens) {
+ PL_reg_start_tmpl = re->nparens*3/2 + 3;
+ if(PL_reg_start_tmp)
+ Renew(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
+ else
+ Newx(PL_reg_start_tmp, PL_reg_start_tmpl, char*);
+ }
+
+ eval_recurse_doit: /* Share code with GOSUB below this line */
+ /* run the pattern returned from (??{...}) */
+ ST.cp = regcppush(0); /* Save *all* the positions. */
+ REGCP_SET(ST.lastcp);
+
+ PL_regoffs = re->offs; /* essentially NOOP on GOSUB */
+
+ /* see regtry, specifically PL_reglast(?:close)?paren is a pointer! (i dont know why) :dmq */
+ PL_reglastparen = &re->lastparen;
+ PL_reglastcloseparen = &re->lastcloseparen;
+ re->lastparen = 0;
+ re->lastcloseparen = 0;
+
+ PL_reginput = locinput;
+ PL_regsize = 0;
+
+ /* XXXX This is too dramatic a measure... */
+ PL_reg_maxiter = 0;
+
+ ST.toggle_reg_flags = PL_reg_flags;
+ if (RX_UTF8(re_sv))
+ PL_reg_flags |= RF_utf8;
+ else
+ PL_reg_flags &= ~RF_utf8;
+ ST.toggle_reg_flags ^= PL_reg_flags; /* diff of old and new */
+
+ ST.prev_rex = rex_sv;
+ ST.prev_curlyx = cur_curlyx;
+ SETREX(rex_sv,re_sv);
+ rex = re;
+ rexi = rei;
+ cur_curlyx = NULL;
+ ST.B = next;
+ ST.prev_eval = cur_eval;
+ cur_eval = st;
+ /* now continue from first node in postoned RE */
+ PUSH_YES_STATE_GOTO(EVAL_AB, startpoint);
+ /* NOTREACHED */
+ }
+ /* logical is 1, /(?(?{...})X|Y)/ */
+ sw = cBOOL(SvTRUE(ret));
+ logical = 0;
+ break;
+ }
+
+ case EVAL_AB: /* cleanup after a successful (??{A})B */
+ /* note: this is called twice; first after popping B, then A */
+ PL_reg_flags ^= ST.toggle_reg_flags;
+ ReREFCNT_dec(rex_sv);
+ SETREX(rex_sv,ST.prev_rex);
+ rex = (struct regexp *)SvANY(rex_sv);
+ rexi = RXi_GET(rex);
+ regcpblow(ST.cp);
+ cur_eval = ST.prev_eval;
+ cur_curlyx = ST.prev_curlyx;
+
+ /* rex was changed so update the pointer in PL_reglastparen and PL_reglastcloseparen */
+ PL_reglastparen = &rex->lastparen;
+ PL_reglastcloseparen = &rex->lastcloseparen;
+ /* also update PL_regoffs */
+ PL_regoffs = rex->offs;
+
+ /* XXXX This is too dramatic a measure... */
+ PL_reg_maxiter = 0;
+ if ( nochange_depth )
+ nochange_depth--;
+ sayYES;
+
+
+ case EVAL_AB_fail: /* unsuccessfully ran A or B in (??{A})B */
+ /* note: this is called twice; first after popping B, then A */
+ PL_reg_flags ^= ST.toggle_reg_flags;
+ ReREFCNT_dec(rex_sv);
+ SETREX(rex_sv,ST.prev_rex);
+ rex = (struct regexp *)SvANY(rex_sv);
+ rexi = RXi_GET(rex);
+ /* rex was changed so update the pointer in PL_reglastparen and PL_reglastcloseparen */
+ PL_reglastparen = &rex->lastparen;
+ PL_reglastcloseparen = &rex->lastcloseparen;
+
+ PL_reginput = locinput;
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex);
+ cur_eval = ST.prev_eval;
+ cur_curlyx = ST.prev_curlyx;
+ /* XXXX This is too dramatic a measure... */
+ PL_reg_maxiter = 0;
+ if ( nochange_depth )
+ nochange_depth--;
+ sayNO_SILENT;
+#undef ST
+
+ case OPEN:
+ n = ARG(scan); /* which paren pair */
+ PL_reg_start_tmp[n] = locinput;
+ if (n > PL_regsize)
+ PL_regsize = n;
+ lastopen = n;
+ break;
+ case CLOSE:
+ n = ARG(scan); /* which paren pair */
+ PL_regoffs[n].start = PL_reg_start_tmp[n] - PL_bostr;
+ PL_regoffs[n].end = locinput - PL_bostr;
+ /*if (n > PL_regsize)
+ PL_regsize = n;*/
+ if (n > *PL_reglastparen)
+ *PL_reglastparen = n;
+ *PL_reglastcloseparen = n;
+ if (cur_eval && cur_eval->u.eval.close_paren == n) {
+ goto fake_end;
+ }
+ break;
+ case ACCEPT:
+ if (ARG(scan)){
+ regnode *cursor;
+ for (cursor=scan;
+ cursor && OP(cursor)!=END;
+ cursor=regnext(cursor))
+ {
+ if ( OP(cursor)==CLOSE ){
+ n = ARG(cursor);
+ if ( n <= lastopen ) {
+ PL_regoffs[n].start
+ = PL_reg_start_tmp[n] - PL_bostr;
+ PL_regoffs[n].end = locinput - PL_bostr;
+ /*if (n > PL_regsize)
+ PL_regsize = n;*/
+ if (n > *PL_reglastparen)
+ *PL_reglastparen = n;
+ *PL_reglastcloseparen = n;
+ if ( n == ARG(scan) || (cur_eval &&
+ cur_eval->u.eval.close_paren == n))
+ break;
+ }
+ }
+ }
+ }
+ goto fake_end;
+ /*NOTREACHED*/
+ case GROUPP:
+ n = ARG(scan); /* which paren pair */
+ sw = cBOOL(*PL_reglastparen >= n && PL_regoffs[n].end != -1);
+ break;
+ case NGROUPP:
+ /* reg_check_named_buff_matched returns 0 for no match */
+ sw = cBOOL(0 < reg_check_named_buff_matched(rex,scan));
+ break;
+ case INSUBP:
+ n = ARG(scan);
+ sw = (cur_eval && (!n || cur_eval->u.eval.close_paren == n));
+ break;
+ case DEFINEP:
+ sw = 0;
+ break;
+ case IFTHEN:
+ PL_reg_leftiter = PL_reg_maxiter; /* Void cache */
+ if (sw)
+ next = NEXTOPER(NEXTOPER(scan));
+ else {
+ next = scan + ARG(scan);
+ if (OP(next) == IFTHEN) /* Fake one. */
+ next = NEXTOPER(NEXTOPER(next));
+ }
+ break;
+ case LOGICAL:
+ logical = scan->flags;
+ break;
+
+/*******************************************************************
+
+The CURLYX/WHILEM pair of ops handle the most generic case of the /A*B/
+pattern, where A and B are subpatterns. (For simple A, CURLYM or
+STAR/PLUS/CURLY/CURLYN are used instead.)
+
+A*B is compiled as <CURLYX><A><WHILEM><B>
+
+On entry to the subpattern, CURLYX is called. This pushes a CURLYX
+state, which contains the current count, initialised to -1. It also sets
+cur_curlyx to point to this state, with any previous value saved in the
+state block.
+
+CURLYX then jumps straight to the WHILEM op, rather than executing A,
+since the pattern may possibly match zero times (i.e. it's a while {} loop
+rather than a do {} while loop).
+
+Each entry to WHILEM represents a successful match of A. The count in the
+CURLYX block is incremented, another WHILEM state is pushed, and execution
+passes to A or B depending on greediness and the current count.
+
+For example, if matching against the string a1a2a3b (where the aN are
+substrings that match /A/), then the match progresses as follows: (the
+pushed states are interspersed with the bits of strings matched so far):
+
+ <CURLYX cnt=-1>
+ <CURLYX cnt=0><WHILEM>
+ <CURLYX cnt=1><WHILEM> a1 <WHILEM>
+ <CURLYX cnt=2><WHILEM> a1 <WHILEM> a2 <WHILEM>
+ <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM>
+ <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM> b
+
+(Contrast this with something like CURLYM, which maintains only a single
+backtrack state:
+
+ <CURLYM cnt=0> a1
+ a1 <CURLYM cnt=1> a2
+ a1 a2 <CURLYM cnt=2> a3
+ a1 a2 a3 <CURLYM cnt=3> b
+)
+
+Each WHILEM state block marks a point to backtrack to upon partial failure
+of A or B, and also contains some minor state data related to that
+iteration. The CURLYX block, pointed to by cur_curlyx, contains the
+overall state, such as the count, and pointers to the A and B ops.
+
+This is complicated slightly by nested CURLYX/WHILEM's. Since cur_curlyx
+must always point to the *current* CURLYX block, the rules are:
+
+When executing CURLYX, save the old cur_curlyx in the CURLYX state block,
+and set cur_curlyx to point the new block.
+
+When popping the CURLYX block after a successful or unsuccessful match,
+restore the previous cur_curlyx.
+
+When WHILEM is about to execute B, save the current cur_curlyx, and set it
+to the outer one saved in the CURLYX block.
+
+When popping the WHILEM block after a successful or unsuccessful B match,
+restore the previous cur_curlyx.
+
+Here's an example for the pattern (AI* BI)*BO
+I and O refer to inner and outer, C and W refer to CURLYX and WHILEM:
+
+cur_
+curlyx backtrack stack
+------ ---------------
+NULL
+CO <CO prev=NULL> <WO>
+CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
+CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
+NULL <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi <WO prev=CO> bo
+
+At this point the pattern succeeds, and we work back down the stack to
+clean up, restoring as we go:
+
+CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
+CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
+CO <CO prev=NULL> <WO>
+NULL
+
+*******************************************************************/
+
+#define ST st->u.curlyx
+
+ case CURLYX: /* start of /A*B/ (for complex A) */
+ {
+ /* No need to save/restore up to this paren */
+ I32 parenfloor = scan->flags;
+
+ assert(next); /* keep Coverity happy */
+ if (OP(PREVOPER(next)) == NOTHING) /* LONGJMP */
+ next += ARG(next);
+
+ /* XXXX Probably it is better to teach regpush to support
+ parenfloor > PL_regsize... */
+ if (parenfloor > (I32)*PL_reglastparen)
+ parenfloor = *PL_reglastparen; /* Pessimization... */
+
+ ST.prev_curlyx= cur_curlyx;
+ cur_curlyx = st;
+ ST.cp = PL_savestack_ix;
+
+ /* these fields contain the state of the current curly.
+ * they are accessed by subsequent WHILEMs */
+ ST.parenfloor = parenfloor;
+ ST.me = scan;
+ ST.B = next;
+ ST.minmod = minmod;
+ minmod = 0;
+ ST.count = -1; /* this will be updated by WHILEM */
+ ST.lastloc = NULL; /* this will be updated by WHILEM */
+
+ PL_reginput = locinput;
+ PUSH_YES_STATE_GOTO(CURLYX_end, PREVOPER(next));
+ /* NOTREACHED */
+ }
+
+ case CURLYX_end: /* just finished matching all of A*B */
+ cur_curlyx = ST.prev_curlyx;
+ sayYES;
+ /* NOTREACHED */
+
+ case CURLYX_end_fail: /* just failed to match all of A*B */
+ regcpblow(ST.cp);
+ cur_curlyx = ST.prev_curlyx;
+ sayNO;
+ /* NOTREACHED */
+
+
+#undef ST
+#define ST st->u.whilem
+
+ case WHILEM: /* just matched an A in /A*B/ (for complex A) */
+ {
+ /* see the discussion above about CURLYX/WHILEM */
+ I32 n;
+ int min = ARG1(cur_curlyx->u.curlyx.me);
+ int max = ARG2(cur_curlyx->u.curlyx.me);
+ regnode *A = NEXTOPER(cur_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS;
+
+ assert(cur_curlyx); /* keep Coverity happy */
+ n = ++cur_curlyx->u.curlyx.count; /* how many A's matched */
+ ST.save_lastloc = cur_curlyx->u.curlyx.lastloc;
+ ST.cache_offset = 0;
+ ST.cache_mask = 0;
+
+ PL_reginput = locinput;
+
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%*s whilem: matched %ld out of %d..%d\n",
+ REPORT_CODE_OFF+depth*2, "", (long)n, min, max)
+ );
+
+ /* First just match a string of min A's. */
+
+ if (n < min) {
+ ST.cp = regcppush(cur_curlyx->u.curlyx.parenfloor);
+ cur_curlyx->u.curlyx.lastloc = locinput;
+ REGCP_SET(ST.lastcp);
+
+ PUSH_STATE_GOTO(WHILEM_A_pre, A);
+ /* NOTREACHED */
+ }
+
+ /* If degenerate A matches "", assume A done. */
+
+ if (locinput == cur_curlyx->u.curlyx.lastloc) {
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%*s whilem: empty match detected, trying continuation...\n",
+ REPORT_CODE_OFF+depth*2, "")
+ );
+ goto do_whilem_B_max;
+ }
+
+ /* super-linear cache processing */
+
+ if (scan->flags) {
+
+ if (!PL_reg_maxiter) {
+ /* start the countdown: Postpone detection until we
+ * know the match is not *that* much linear. */
+ PL_reg_maxiter = (PL_regeol - PL_bostr + 1) * (scan->flags>>4);
+ /* possible overflow for long strings and many CURLYX's */
+ if (PL_reg_maxiter < 0)
+ PL_reg_maxiter = I32_MAX;
+ PL_reg_leftiter = PL_reg_maxiter;
+ }
+
+ if (PL_reg_leftiter-- == 0) {
+ /* initialise cache */
+ const I32 size = (PL_reg_maxiter + 7)/8;
+ if (PL_reg_poscache) {
+ if ((I32)PL_reg_poscache_size < size) {
+ Renew(PL_reg_poscache, size, char);
+ PL_reg_poscache_size = size;
+ }
+ Zero(PL_reg_poscache, size, char);
+ }
+ else {
+ PL_reg_poscache_size = size;
+ Newxz(PL_reg_poscache, size, char);
+ }
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%swhilem: Detected a super-linear match, switching on caching%s...\n",
+ PL_colors[4], PL_colors[5])
+ );
+ }
+
+ if (PL_reg_leftiter < 0) {
+ /* have we already failed at this position? */
+ I32 offset, mask;
+ offset = (scan->flags & 0xf) - 1
+ + (locinput - PL_bostr) * (scan->flags>>4);
+ mask = 1 << (offset % 8);
+ offset /= 8;
+ if (PL_reg_poscache[offset] & mask) {
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%*s whilem: (cache) already tried at this position...\n",
+ REPORT_CODE_OFF+depth*2, "")
+ );
+ sayNO; /* cache records failure */
+ }
+ ST.cache_offset = offset;
+ ST.cache_mask = mask;
+ }
+ }
+
+ /* Prefer B over A for minimal matching. */
+
+ if (cur_curlyx->u.curlyx.minmod) {
+ ST.save_curlyx = cur_curlyx;
+ cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
+ ST.cp = regcppush(ST.save_curlyx->u.curlyx.parenfloor);
+ REGCP_SET(ST.lastcp);
+ PUSH_YES_STATE_GOTO(WHILEM_B_min, ST.save_curlyx->u.curlyx.B);
+ /* NOTREACHED */
+ }
+
+ /* Prefer A over B for maximal matching. */
+
+ if (n < max) { /* More greed allowed? */
+ ST.cp = regcppush(cur_curlyx->u.curlyx.parenfloor);
+ cur_curlyx->u.curlyx.lastloc = locinput;
+ REGCP_SET(ST.lastcp);
+ PUSH_STATE_GOTO(WHILEM_A_max, A);
+ /* NOTREACHED */
+ }
+ goto do_whilem_B_max;
+ }
+ /* NOTREACHED */
+
+ case WHILEM_B_min: /* just matched B in a minimal match */
+ case WHILEM_B_max: /* just matched B in a maximal match */
+ cur_curlyx = ST.save_curlyx;
+ sayYES;
+ /* NOTREACHED */
+
+ case WHILEM_B_max_fail: /* just failed to match B in a maximal match */
+ cur_curlyx = ST.save_curlyx;
+ cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
+ cur_curlyx->u.curlyx.count--;
+ CACHEsayNO;
+ /* NOTREACHED */
+
+ case WHILEM_A_min_fail: /* just failed to match A in a minimal match */
+ /* FALL THROUGH */
+ case WHILEM_A_pre_fail: /* just failed to match even minimal A */
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex);
+ cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
+ cur_curlyx->u.curlyx.count--;
+ CACHEsayNO;
+ /* NOTREACHED */
+
+ case WHILEM_A_max_fail: /* just failed to match A in a maximal match */
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex); /* Restore some previous $<digit>s? */
+ PL_reginput = locinput;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "%*s whilem: failed, trying continuation...\n",
+ REPORT_CODE_OFF+depth*2, "")
+ );
+ do_whilem_B_max:
+ if (cur_curlyx->u.curlyx.count >= REG_INFTY
+ && ckWARN(WARN_REGEXP)
+ && !(PL_reg_flags & RF_warned))
+ {
+ PL_reg_flags |= RF_warned;
+ Perl_warner(aTHX_ packWARN(WARN_REGEXP),
+ "Complex regular subexpression recursion limit (%d) "
+ "exceeded",
+ REG_INFTY - 1);
+ }
+
+ /* now try B */
+ ST.save_curlyx = cur_curlyx;
+ cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
+ PUSH_YES_STATE_GOTO(WHILEM_B_max, ST.save_curlyx->u.curlyx.B);
+ /* NOTREACHED */
+
+ case WHILEM_B_min_fail: /* just failed to match B in a minimal match */
+ cur_curlyx = ST.save_curlyx;
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex);
+
+ if (cur_curlyx->u.curlyx.count >= /*max*/ARG2(cur_curlyx->u.curlyx.me)) {
+ /* Maximum greed exceeded */
+ if (cur_curlyx->u.curlyx.count >= REG_INFTY
+ && ckWARN(WARN_REGEXP)
+ && !(PL_reg_flags & RF_warned))
+ {
+ PL_reg_flags |= RF_warned;
+ Perl_warner(aTHX_ packWARN(WARN_REGEXP),
+ "Complex regular subexpression recursion "
+ "limit (%d) exceeded",
+ REG_INFTY - 1);
+ }
+ cur_curlyx->u.curlyx.count--;
+ CACHEsayNO;
+ }
+
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "%*s trying longer...\n", REPORT_CODE_OFF+depth*2, "")
+ );
+ /* Try grabbing another A and see if it helps. */
+ PL_reginput = locinput;
+ cur_curlyx->u.curlyx.lastloc = locinput;
+ ST.cp = regcppush(cur_curlyx->u.curlyx.parenfloor);
+ REGCP_SET(ST.lastcp);
+ PUSH_STATE_GOTO(WHILEM_A_min,
+ /*A*/ NEXTOPER(ST.save_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS);
+ /* NOTREACHED */
+
+#undef ST
+#define ST st->u.branch
+
+ case BRANCHJ: /* /(...|A|...)/ with long next pointer */
+ next = scan + ARG(scan);
+ if (next == scan)
+ next = NULL;
+ scan = NEXTOPER(scan);
+ /* FALL THROUGH */
+
+ case BRANCH: /* /(...|A|...)/ */
+ scan = NEXTOPER(scan); /* scan now points to inner node */
+ ST.lastparen = *PL_reglastparen;
+ ST.next_branch = next;
+ REGCP_SET(ST.cp);
+ PL_reginput = locinput;
+
+ /* Now go into the branch */
+ if (has_cutgroup) {
+ PUSH_YES_STATE_GOTO(BRANCH_next, scan);
+ } else {
+ PUSH_STATE_GOTO(BRANCH_next, scan);
+ }
+ /* NOTREACHED */
+ case CUTGROUP:
+ PL_reginput = locinput;
+ sv_yes_mark = st->u.mark.mark_name = scan->flags ? NULL :
+ MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ PUSH_STATE_GOTO(CUTGROUP_next,next);
+ /* NOTREACHED */
+ case CUTGROUP_next_fail:
+ do_cutgroup = 1;
+ no_final = 1;
+ if (st->u.mark.mark_name)
+ sv_commit = st->u.mark.mark_name;
+ sayNO;
+ /* NOTREACHED */
+ case BRANCH_next:
+ sayYES;
+ /* NOTREACHED */
+ case BRANCH_next_fail: /* that branch failed; try the next, if any */
+ if (do_cutgroup) {
+ do_cutgroup = 0;
+ no_final = 0;
+ }
+ REGCP_UNWIND(ST.cp);
+ for (n = *PL_reglastparen; n > ST.lastparen; n--)
+ PL_regoffs[n].end = -1;
+ *PL_reglastparen = n;
+ /*dmq: *PL_reglastcloseparen = n; */
+ scan = ST.next_branch;
+ /* no more branches? */
+ if (!scan || (OP(scan) != BRANCH && OP(scan) != BRANCHJ)) {
+ DEBUG_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sBRANCH failed...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4],
+ PL_colors[5] );
+ });
+ sayNO_SILENT;
+ }
+ continue; /* execute next BRANCH[J] op */
+ /* NOTREACHED */
+
+ case MINMOD:
+ minmod = 1;
+ break;
+
+#undef ST
+#define ST st->u.curlym
+
+ case CURLYM: /* /A{m,n}B/ where A is fixed-length */
+
+ /* This is an optimisation of CURLYX that enables us to push
+ * only a single backtracking state, no matter how many matches
+ * there are in {m,n}. It relies on the pattern being constant
+ * length, with no parens to influence future backrefs
+ */
+
+ ST.me = scan;
+ scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
+
+ /* if paren positive, emulate an OPEN/CLOSE around A */
+ if (ST.me->flags) {
+ U32 paren = ST.me->flags;
+ if (paren > PL_regsize)
+ PL_regsize = paren;
+ if (paren > *PL_reglastparen)
+ *PL_reglastparen = paren;
+ scan += NEXT_OFF(scan); /* Skip former OPEN. */
+ }
+ ST.A = scan;
+ ST.B = next;
+ ST.alen = 0;
+ ST.count = 0;
+ ST.minmod = minmod;
+ minmod = 0;
+ ST.c1 = CHRTEST_UNINIT;
+ REGCP_SET(ST.cp);
+
+ if (!(ST.minmod ? ARG1(ST.me) : ARG2(ST.me))) /* min/max */
+ goto curlym_do_B;
+
+ curlym_do_A: /* execute the A in /A{m,n}B/ */
+ PL_reginput = locinput;
+ PUSH_YES_STATE_GOTO(CURLYM_A, ST.A); /* match A */
+ /* NOTREACHED */
+
+ case CURLYM_A: /* we've just matched an A */
+ locinput = st->locinput;
+ nextchr = UCHARAT(locinput);
+
+ ST.count++;
+ /* after first match, determine A's length: u.curlym.alen */
+ if (ST.count == 1) {
+ if (PL_reg_match_utf8) {
+ char *s = locinput;
+ while (s < PL_reginput) {
+ ST.alen++;
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ ST.alen = PL_reginput - locinput;
+ }
+ if (ST.alen == 0)
+ ST.count = ST.minmod ? ARG1(ST.me) : ARG2(ST.me);
+ }
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM now matched %"IVdf" times, len=%"IVdf"...\n",
+ (int)(REPORT_CODE_OFF+(depth*2)), "",
+ (IV) ST.count, (IV)ST.alen)
+ );
+
+ locinput = PL_reginput;
+
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.me->flags)
+ goto fake_end;
+
+ {
+ I32 max = (ST.minmod ? ARG1(ST.me) : ARG2(ST.me));
+ if ( max == REG_INFTY || ST.count < max )
+ goto curlym_do_A; /* try to match another A */
+ }
+ goto curlym_do_B; /* try to match B */
+
+ case CURLYM_A_fail: /* just failed to match an A */
+ REGCP_UNWIND(ST.cp);
+
+ if (ST.minmod || ST.count < ARG1(ST.me) /* min*/
+ || (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.me->flags))
+ sayNO;
+
+ curlym_do_B: /* execute the B in /A{m,n}B/ */
+ PL_reginput = locinput;
+ if (ST.c1 == CHRTEST_UNINIT) {
+ /* calculate c1 and c2 for possible match of 1st char
+ * following curly */
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ if (HAS_TEXT(ST.B) || JUMPABLE(ST.B)) {
+ regnode *text_node = ST.B;
+ if (! HAS_TEXT(text_node))
+ FIND_NEXT_IMPT(text_node);
+ /* this used to be
+
+ (HAS_TEXT(text_node) && PL_regkind[OP(text_node)] == EXACT)
+
+ But the former is redundant in light of the latter.
+
+ if this changes back then the macro for
+ IS_TEXT and friends need to change.
+ */
+ if (PL_regkind[OP(text_node)] == EXACT)
+ {
+
+ ST.c1 = (U8)*STRING(text_node);
+ switch (OP(text_node)) {
+ case EXACTF: ST.c2 = PL_fold[ST.c1]; break;
+ case EXACTFA:
+ case EXACTFU_SS:
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU: ST.c2 = PL_fold_latin1[ST.c1]; break;
+ case EXACTFL: ST.c2 = PL_fold_locale[ST.c1]; break;
+ default: ST.c2 = ST.c1;
+ }
+ }
+ }
+ }
+
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM trying tail with matches=%"IVdf"...\n",
+ (int)(REPORT_CODE_OFF+(depth*2)),
+ "", (IV)ST.count)
+ );
+ if (ST.c1 != CHRTEST_VOID
+ && UCHARAT(PL_reginput) != ST.c1
+ && UCHARAT(PL_reginput) != ST.c2)
+ {
+ /* simulate B failing */
+ DEBUG_OPTIMISE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM Fast bail c1=%"IVdf" c2=%"IVdf"\n",
+ (int)(REPORT_CODE_OFF+(depth*2)),"",
+ (IV)ST.c1,(IV)ST.c2
+ ));
+ state_num = CURLYM_B_fail;
+ goto reenter_switch;
+ }
+
+ if (ST.me->flags) {
+ /* mark current A as captured */
+ I32 paren = ST.me->flags;
+ if (ST.count) {
+ PL_regoffs[paren].start
+ = HOPc(PL_reginput, -ST.alen) - PL_bostr;
+ PL_regoffs[paren].end = PL_reginput - PL_bostr;
+ /*dmq: *PL_reglastcloseparen = paren; */
+ }
+ else
+ PL_regoffs[paren].end = -1;
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.me->flags)
+ {
+ if (ST.count)
+ goto fake_end;
+ else
+ sayNO;
+ }
+ }
+
+ PUSH_STATE_GOTO(CURLYM_B, ST.B); /* match B */
+ /* NOTREACHED */
+
+ case CURLYM_B_fail: /* just failed to match a B */
+ REGCP_UNWIND(ST.cp);
+ if (ST.minmod) {
+ I32 max = ARG2(ST.me);
+ if (max != REG_INFTY && ST.count == max)
+ sayNO;
+ goto curlym_do_A; /* try to match a further A */
+ }
+ /* backtrack one A */
+ if (ST.count == ARG1(ST.me) /* min */)
+ sayNO;
+ ST.count--;
+ locinput = HOPc(locinput, -ST.alen);
+ goto curlym_do_B; /* try to match B */
+
+#undef ST
+#define ST st->u.curly
+
+#define CURLY_SETPAREN(paren, success) \
+ if (paren) { \
+ if (success) { \
+ PL_regoffs[paren].start = HOPc(locinput, -1) - PL_bostr; \
+ PL_regoffs[paren].end = locinput - PL_bostr; \
+ *PL_reglastcloseparen = paren; \
+ } \
+ else \
+ PL_regoffs[paren].end = -1; \
+ }
+
+ case STAR: /* /A*B/ where A is width 1 */
+ ST.paren = 0;
+ ST.min = 0;
+ ST.max = REG_INFTY;
+ scan = NEXTOPER(scan);
+ goto repeat;
+ case PLUS: /* /A+B/ where A is width 1 */
+ ST.paren = 0;
+ ST.min = 1;
+ ST.max = REG_INFTY;
+ scan = NEXTOPER(scan);
+ goto repeat;
+ case CURLYN: /* /(A){m,n}B/ where A is width 1 */
+ ST.paren = scan->flags; /* Which paren to set */
+ if (ST.paren > PL_regsize)
+ PL_regsize = ST.paren;
+ if (ST.paren > *PL_reglastparen)
+ *PL_reglastparen = ST.paren;
+ ST.min = ARG1(scan); /* min to match */
+ ST.max = ARG2(scan); /* max to match */
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ ST.min=1;
+ ST.max=1;
+ }
+ scan = regnext(NEXTOPER(scan) + NODE_STEP_REGNODE);
+ goto repeat;
+ case CURLY: /* /A{m,n}B/ where A is width 1 */
+ ST.paren = 0;
+ ST.min = ARG1(scan); /* min to match */
+ ST.max = ARG2(scan); /* max to match */
+ scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
+ repeat:
+ /*
+ * Lookahead to avoid useless match attempts
+ * when we know what character comes next.
+ *
+ * Used to only do .*x and .*?x, but now it allows
+ * for )'s, ('s and (?{ ... })'s to be in the way
+ * of the quantifier and the EXACT-like node. -- japhy
+ */
+
+ if (ST.min > ST.max) /* XXX make this a compile-time check? */
+ sayNO;
+ if (HAS_TEXT(next) || JUMPABLE(next)) {
+ U8 *s;
+ regnode *text_node = next;
+
+ if (! HAS_TEXT(text_node))
+ FIND_NEXT_IMPT(text_node);
+
+ if (! HAS_TEXT(text_node))
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ else {
+ if ( PL_regkind[OP(text_node)] != EXACT ) {
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ goto assume_ok_easy;
+ }
+ else
+ s = (U8*)STRING(text_node);
+
+ /* Currently we only get here when
+
+ PL_rekind[OP(text_node)] == EXACT
+
+ if this changes back then the macro for IS_TEXT and
+ friends need to change. */
+ if (!UTF_PATTERN) {
+ ST.c1 = *s;
+ switch (OP(text_node)) {
+ case EXACTF: ST.c2 = PL_fold[ST.c1]; break;
+ case EXACTFA:
+ case EXACTFU_SS:
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU: ST.c2 = PL_fold_latin1[ST.c1]; break;
+ case EXACTFL: ST.c2 = PL_fold_locale[ST.c1]; break;
+ default: ST.c2 = ST.c1; break;
+ }
+ }
+ else { /* UTF_PATTERN */
+ if (IS_TEXTFU(text_node) || IS_TEXTF(text_node)) {
+ STRLEN ulen1, ulen2;
+ U8 tmpbuf1[UTF8_MAXBYTES_CASE+1];
+ U8 tmpbuf2[UTF8_MAXBYTES_CASE+1];
+
+ to_utf8_lower((U8*)s, tmpbuf1, &ulen1);
+ to_utf8_upper((U8*)s, tmpbuf2, &ulen2);
+#ifdef EBCDIC
+ ST.c1 = utf8n_to_uvchr(tmpbuf1, UTF8_MAXLEN, 0,
+ ckWARN(WARN_UTF8) ?
+ 0 : UTF8_ALLOW_ANY);
+ ST.c2 = utf8n_to_uvchr(tmpbuf2, UTF8_MAXLEN, 0,
+ ckWARN(WARN_UTF8) ?
+ 0 : UTF8_ALLOW_ANY);
+#else
+ ST.c1 = utf8n_to_uvuni(tmpbuf1, UTF8_MAXBYTES, 0,
+ uniflags);
+ ST.c2 = utf8n_to_uvuni(tmpbuf2, UTF8_MAXBYTES, 0,
+ uniflags);
+#endif
+ }
+ else {
+ ST.c2 = ST.c1 = utf8n_to_uvchr(s, UTF8_MAXBYTES, 0,
+ uniflags);
+ }
+ }
+ }
+ }
+ else
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ assume_ok_easy:
+
+ ST.A = scan;
+ ST.B = next;
+ PL_reginput = locinput;
+ if (minmod) {
+ minmod = 0;
+ if (ST.min && regrepeat(rex, ST.A, ST.min, depth) < ST.min)
+ sayNO;
+ ST.count = ST.min;
+ locinput = PL_reginput;
+ REGCP_SET(ST.cp);
+ if (ST.c1 == CHRTEST_VOID)
+ goto curly_try_B_min;
+
+ ST.oldloc = locinput;
+
+ /* set ST.maxpos to the furthest point along the
+ * string that could possibly match */
+ if (ST.max == REG_INFTY) {
+ ST.maxpos = PL_regeol - 1;
+ if (utf8_target)
+ while (UTF8_IS_CONTINUATION(*(U8*)ST.maxpos))
+ ST.maxpos--;
+ }
+ else if (utf8_target) {
+ int m = ST.max - ST.min;
+ for (ST.maxpos = locinput;
+ m >0 && ST.maxpos + UTF8SKIP(ST.maxpos) <= PL_regeol; m--)
+ ST.maxpos += UTF8SKIP(ST.maxpos);
+ }
+ else {
+ ST.maxpos = locinput + ST.max - ST.min;
+ if (ST.maxpos >= PL_regeol)
+ ST.maxpos = PL_regeol - 1;
+ }
+ goto curly_try_B_min_known;
+
+ }
+ else {
+ ST.count = regrepeat(rex, ST.A, ST.max, depth);
+ locinput = PL_reginput;
+ if (ST.count < ST.min)
+ sayNO;
+ if ((ST.count > ST.min)
+ && (PL_regkind[OP(ST.B)] == EOL) && (OP(ST.B) != MEOL))
+ {
+ /* A{m,n} must come at the end of the string, there's
+ * no point in backing off ... */
+ ST.min = ST.count;
+ /* ...except that $ and \Z can match before *and* after
+ newline at the end. Consider "\n\n" =~ /\n+\Z\n/.
+ We may back off by one in this case. */
+ if (UCHARAT(PL_reginput - 1) == '\n' && OP(ST.B) != EOS)
+ ST.min--;
+ }
+ REGCP_SET(ST.cp);
+ goto curly_try_B_max;
+ }
+ /* NOTREACHED */
+
+
+ case CURLY_B_min_known_fail:
+ /* failed to find B in a non-greedy match where c1,c2 valid */
+ if (ST.paren && ST.count)
+ PL_regoffs[ST.paren].end = -1;
+
+ PL_reginput = locinput; /* Could be reset... */
+ REGCP_UNWIND(ST.cp);
+ /* Couldn't or didn't -- move forward. */
+ ST.oldloc = locinput;
+ if (utf8_target)
+ locinput += UTF8SKIP(locinput);
+ else
+ locinput++;
+ ST.count++;
+ curly_try_B_min_known:
+ /* find the next place where 'B' could work, then call B */
+ {
+ int n;
+ if (utf8_target) {
+ n = (ST.oldloc == locinput) ? 0 : 1;
+ if (ST.c1 == ST.c2) {
+ STRLEN len;
+ /* set n to utf8_distance(oldloc, locinput) */
+ while (locinput <= ST.maxpos &&
+ utf8n_to_uvchr((U8*)locinput,
+ UTF8_MAXBYTES, &len,
+ uniflags) != (UV)ST.c1) {
+ locinput += len;
+ n++;
+ }
+ }
+ else {
+ /* set n to utf8_distance(oldloc, locinput) */
+ while (locinput <= ST.maxpos) {
+ STRLEN len;
+ const UV c = utf8n_to_uvchr((U8*)locinput,
+ UTF8_MAXBYTES, &len,
+ uniflags);
+ if (c == (UV)ST.c1 || c == (UV)ST.c2)
+ break;
+ locinput += len;
+ n++;
+ }
+ }
+ }
+ else {
+ if (ST.c1 == ST.c2) {
+ while (locinput <= ST.maxpos &&
+ UCHARAT(locinput) != ST.c1)
+ locinput++;
+ }
+ else {
+ while (locinput <= ST.maxpos
+ && UCHARAT(locinput) != ST.c1
+ && UCHARAT(locinput) != ST.c2)
+ locinput++;
+ }
+ n = locinput - ST.oldloc;
+ }
+ if (locinput > ST.maxpos)
+ sayNO;
+ /* PL_reginput == oldloc now */
+ if (n) {
+ ST.count += n;
+ if (regrepeat(rex, ST.A, n, depth) < n)
+ sayNO;
+ }
+ PL_reginput = locinput;
+ CURLY_SETPAREN(ST.paren, ST.count);
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ goto fake_end;
+ }
+ PUSH_STATE_GOTO(CURLY_B_min_known, ST.B);
+ }
+ /* NOTREACHED */
+
+
+ case CURLY_B_min_fail:
+ /* failed to find B in a non-greedy match where c1,c2 invalid */
+ if (ST.paren && ST.count)
+ PL_regoffs[ST.paren].end = -1;
+
+ REGCP_UNWIND(ST.cp);
+ /* failed -- move forward one */
+ PL_reginput = locinput;
+ if (regrepeat(rex, ST.A, 1, depth)) {
+ ST.count++;
+ locinput = PL_reginput;
+ if (ST.count <= ST.max || (ST.max == REG_INFTY &&
+ ST.count > 0)) /* count overflow ? */
+ {
+ curly_try_B_min:
+ CURLY_SETPAREN(ST.paren, ST.count);
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ goto fake_end;
+ }
+ PUSH_STATE_GOTO(CURLY_B_min, ST.B);
+ }
+ }
+ sayNO;
+ /* NOTREACHED */
+
+
+ curly_try_B_max:
+ /* a successful greedy match: now try to match B */
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ goto fake_end;
+ }
+ {
+ UV c = 0;
+ if (ST.c1 != CHRTEST_VOID)
+ c = utf8_target ? utf8n_to_uvchr((U8*)PL_reginput,
+ UTF8_MAXBYTES, 0, uniflags)
+ : (UV) UCHARAT(PL_reginput);
+ /* If it could work, try it. */
+ if (ST.c1 == CHRTEST_VOID || c == (UV)ST.c1 || c == (UV)ST.c2) {
+ CURLY_SETPAREN(ST.paren, ST.count);
+ PUSH_STATE_GOTO(CURLY_B_max, ST.B);
+ /* NOTREACHED */
+ }
+ }
+ /* FALL THROUGH */
+ case CURLY_B_max_fail:
+ /* failed to find B in a greedy match */
+ if (ST.paren && ST.count)
+ PL_regoffs[ST.paren].end = -1;
+
+ REGCP_UNWIND(ST.cp);
+ /* back up. */
+ if (--ST.count < ST.min)
+ sayNO;
+ PL_reginput = locinput = HOPc(locinput, -1);
+ goto curly_try_B_max;
+
+#undef ST
+
+ case END:
+ fake_end:
+ if (cur_eval) {
+ /* we've just finished A in /(??{A})B/; now continue with B */
+ I32 tmpix;
+ st->u.eval.toggle_reg_flags
+ = cur_eval->u.eval.toggle_reg_flags;
+ PL_reg_flags ^= st->u.eval.toggle_reg_flags;
+
+ st->u.eval.prev_rex = rex_sv; /* inner */
+ SETREX(rex_sv,cur_eval->u.eval.prev_rex);
+ rex = (struct regexp *)SvANY(rex_sv);
+ rexi = RXi_GET(rex);
+ cur_curlyx = cur_eval->u.eval.prev_curlyx;
+ (void)ReREFCNT_inc(rex_sv);
+ st->u.eval.cp = regcppush(0); /* Save *all* the positions. */
+
+ /* rex was changed so update the pointer in PL_reglastparen and PL_reglastcloseparen */
+ PL_reglastparen = &rex->lastparen;
+ PL_reglastcloseparen = &rex->lastcloseparen;
+
+ REGCP_SET(st->u.eval.lastcp);
+ PL_reginput = locinput;
+
+ /* Restore parens of the outer rex without popping the
+ * savestack */
+ tmpix = PL_savestack_ix;
+ PL_savestack_ix = cur_eval->u.eval.lastcp;
+ regcppop(rex);
+ PL_savestack_ix = tmpix;
+
+ st->u.eval.prev_eval = cur_eval;
+ cur_eval = cur_eval->u.eval.prev_eval;
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log, "%*s EVAL trying tail ... %"UVxf"\n",
+ REPORT_CODE_OFF+depth*2, "",PTR2UV(cur_eval)););
+ if ( nochange_depth )
+ nochange_depth--;
+
+ PUSH_YES_STATE_GOTO(EVAL_AB,
+ st->u.eval.prev_eval->u.eval.B); /* match B */
+ }
+
+ if (locinput < reginfo->till) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "%sMatch possible, but length=%ld is smaller than requested=%ld, failing!%s\n",
+ PL_colors[4],
+ (long)(locinput - PL_reg_starttry),
+ (long)(reginfo->till - PL_reg_starttry),
+ PL_colors[5]));
+
+ sayNO_SILENT; /* Cannot match: too short. */
+ }
+ PL_reginput = locinput; /* put where regtry can find it */
+ sayYES; /* Success! */
+
+ case SUCCEED: /* successful SUSPEND/UNLESSM/IFMATCH/CURLYM */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %ssubpattern success...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5]));
+ PL_reginput = locinput; /* put where regtry can find it */
+ sayYES; /* Success! */
+
+#undef ST
+#define ST st->u.ifmatch
+
+ case SUSPEND: /* (?>A) */
+ ST.wanted = 1;
+ PL_reginput = locinput;
+ goto do_ifmatch;
+
+ case UNLESSM: /* -ve lookaround: (?!A), or with flags, (?<!A) */
+ ST.wanted = 0;
+ goto ifmatch_trivial_fail_test;
+
+ case IFMATCH: /* +ve lookaround: (?=A), or with flags, (?<=A) */
+ ST.wanted = 1;
+ ifmatch_trivial_fail_test:
+ if (scan->flags) {
+ char * const s = HOPBACKc(locinput, scan->flags);
+ if (!s) {
+ /* trivial fail */
+ if (logical) {
+ logical = 0;
+ sw = 1 - cBOOL(ST.wanted);
+ }
+ else if (ST.wanted)
+ sayNO;
+ next = scan + ARG(scan);
+ if (next == scan)
+ next = NULL;
+ break;
+ }
+ PL_reginput = s;
+ }
+ else
+ PL_reginput = locinput;
+
+ do_ifmatch:
+ ST.me = scan;
+ ST.logical = logical;
+ logical = 0; /* XXX: reset state of logical once it has been saved into ST */
+
+ /* execute body of (?...A) */
+ PUSH_YES_STATE_GOTO(IFMATCH_A, NEXTOPER(NEXTOPER(scan)));
+ /* NOTREACHED */
+
+ case IFMATCH_A_fail: /* body of (?...A) failed */
+ ST.wanted = !ST.wanted;
+ /* FALL THROUGH */
+
+ case IFMATCH_A: /* body of (?...A) succeeded */
+ if (ST.logical) {
+ sw = cBOOL(ST.wanted);
+ }
+ else if (!ST.wanted)
+ sayNO;
+
+ if (OP(ST.me) == SUSPEND)
+ locinput = PL_reginput;
+ else {
+ locinput = PL_reginput = st->locinput;
+ nextchr = UCHARAT(locinput);
+ }
+ scan = ST.me + ARG(ST.me);
+ if (scan == ST.me)
+ scan = NULL;
+ continue; /* execute B */
+
+#undef ST
+
+ case LONGJMP:
+ next = scan + ARG(scan);
+ if (next == scan)
+ next = NULL;
+ break;
+ case COMMIT:
+ reginfo->cutpoint = PL_regeol;
+ /* FALLTHROUGH */
+ case PRUNE:
+ PL_reginput = locinput;
+ if (!scan->flags)
+ sv_yes_mark = sv_commit = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ PUSH_STATE_GOTO(COMMIT_next,next);
+ /* NOTREACHED */
+ case COMMIT_next_fail:
+ no_final = 1;
+ /* FALLTHROUGH */
+ case OPFAIL:
+ sayNO;
+ /* NOTREACHED */
+
+#define ST st->u.mark
+ case MARKPOINT:
+ ST.prev_mark = mark_state;
+ ST.mark_name = sv_commit = sv_yes_mark
+ = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ mark_state = st;
+ ST.mark_loc = PL_reginput = locinput;
+ PUSH_YES_STATE_GOTO(MARKPOINT_next,next);
+ /* NOTREACHED */
+ case MARKPOINT_next:
+ mark_state = ST.prev_mark;
+ sayYES;
+ /* NOTREACHED */
+ case MARKPOINT_next_fail:
+ if (popmark && sv_eq(ST.mark_name,popmark))
+ {
+ if (ST.mark_loc > startpoint)
+ reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
+ popmark = NULL; /* we found our mark */
+ sv_commit = ST.mark_name;
+
+ DEBUG_EXECUTE_r({
+ PerlIO_printf(Perl_debug_log,
+ "%*s %ssetting cutpoint to mark:%"SVf"...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4], SVfARG(sv_commit), PL_colors[5]);
+ });
+ }
+ mark_state = ST.prev_mark;
+ sv_yes_mark = mark_state ?
+ mark_state->u.mark.mark_name : NULL;
+ sayNO;
+ /* NOTREACHED */
+ case SKIP:
+ PL_reginput = locinput;
+ if (scan->flags) {
+ /* (*SKIP) : if we fail we cut here*/
+ ST.mark_name = NULL;
+ ST.mark_loc = locinput;
+ PUSH_STATE_GOTO(SKIP_next,next);
+ } else {
+ /* (*SKIP:NAME) : if there is a (*MARK:NAME) fail where it was,
+ otherwise do nothing. Meaning we need to scan
+ */
+ regmatch_state *cur = mark_state;
+ SV *find = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+
+ while (cur) {
+ if ( sv_eq( cur->u.mark.mark_name,
+ find ) )
+ {
+ ST.mark_name = find;
+ PUSH_STATE_GOTO( SKIP_next, next );
+ }
+ cur = cur->u.mark.prev_mark;
+ }
+ }
+ /* Didn't find our (*MARK:NAME) so ignore this (*SKIP:NAME) */
+ break;
+ case SKIP_next_fail:
+ if (ST.mark_name) {
+ /* (*CUT:NAME) - Set up to search for the name as we
+ collapse the stack*/
+ popmark = ST.mark_name;
+ } else {
+ /* (*CUT) - No name, we cut here.*/
+ if (ST.mark_loc > startpoint)
+ reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
+ /* but we set sv_commit to latest mark_name if there
+ is one so they can test to see how things lead to this
+ cut */
+ if (mark_state)
+ sv_commit=mark_state->u.mark.mark_name;
+ }
+ no_final = 1;
+ sayNO;
+ /* NOTREACHED */
+#undef ST
+ case LNBREAK:
+ if ((n=is_LNBREAK(locinput,utf8_target))) {
+ locinput += n;
+ nextchr = UCHARAT(locinput);
+ } else
+ sayNO;
+ break;
+
+#define CASE_CLASS(nAmE) \
+ case nAmE: \
+ if (locinput >= PL_regeol) \
+ sayNO; \
+ if ((n=is_##nAmE(locinput,utf8_target))) { \
+ locinput += n; \
+ nextchr = UCHARAT(locinput); \
+ } else \
+ sayNO; \
+ break; \
+ case N##nAmE: \
+ if (locinput >= PL_regeol) \
+ sayNO; \
+ if ((n=is_##nAmE(locinput,utf8_target))) { \
+ sayNO; \
+ } else { \
+ locinput += UTF8SKIP(locinput); \
+ nextchr = UCHARAT(locinput); \
+ } \
+ break
+
+ CASE_CLASS(VERTWS);
+ CASE_CLASS(HORIZWS);
+#undef CASE_CLASS
+
+ default:
+ PerlIO_printf(Perl_error_log, "%"UVxf" %d\n",
+ PTR2UV(scan), OP(scan));
+ Perl_croak(aTHX_ "regexp memory corruption");
+
+ } /* end switch */
+
+ /* switch break jumps here */
+ scan = next; /* prepare to execute the next op and ... */
+ continue; /* ... jump back to the top, reusing st */
+ /* NOTREACHED */
+
+ push_yes_state:
+ /* push a state that backtracks on success */
+ st->u.yes.prev_yes_state = yes_state;
+ yes_state = st;
+ /* FALL THROUGH */
+ push_state:
+ /* push a new regex state, then continue at scan */
+ {
+ regmatch_state *newst;
+
+ DEBUG_STACK_r({
+ regmatch_state *cur = st;
+ regmatch_state *curyes = yes_state;
+ int curd = depth;
+ regmatch_slab *slab = PL_regmatch_slab;
+ for (;curd > -1;cur--,curd--) {
+ if (cur < SLAB_FIRST(slab)) {
+ slab = slab->prev;
+ cur = SLAB_LAST(slab);
+ }
+ PerlIO_printf(Perl_error_log, "%*s#%-3d %-10s %s\n",
+ REPORT_CODE_OFF + 2 + depth * 2,"",
+ curd, PL_reg_name[cur->resume_state],
+ (curyes == cur) ? "yes" : ""
+ );
+ if (curyes == cur)
+ curyes = cur->u.yes.prev_yes_state;
+ }
+ } else
+ DEBUG_STATE_pp("push")
+ );
+ depth++;
+ st->locinput = locinput;
+ newst = st+1;
+ if (newst > SLAB_LAST(PL_regmatch_slab))
+ newst = S_push_slab(aTHX);
+ PL_regmatch_state = newst;
+
+ locinput = PL_reginput;
+ nextchr = UCHARAT(locinput);
+ st = newst;
+ continue;
+ /* NOTREACHED */
+ }
+ }
+
+ /*
+ * We get here only if there's trouble -- normally "case END" is
+ * the terminating point.
+ */
+ Perl_croak(aTHX_ "corrupted regexp pointers");
+ /*NOTREACHED*/
+ sayNO;
+
+yes:
+ if (yes_state) {
+ /* we have successfully completed a subexpression, but we must now
+ * pop to the state marked by yes_state and continue from there */
+ assert(st != yes_state);
+#ifdef DEBUGGING
+ while (st != yes_state) {
+ st--;
+ if (st < SLAB_FIRST(PL_regmatch_slab)) {
+ PL_regmatch_slab = PL_regmatch_slab->prev;
+ st = SLAB_LAST(PL_regmatch_slab);
+ }
+ DEBUG_STATE_r({
+ if (no_final) {
+ DEBUG_STATE_pp("pop (no final)");
+ } else {
+ DEBUG_STATE_pp("pop (yes)");
+ }
+ });
+ depth--;
+ }
+#else
+ while (yes_state < SLAB_FIRST(PL_regmatch_slab)
+ || yes_state > SLAB_LAST(PL_regmatch_slab))
+ {
+ /* not in this slab, pop slab */
+ depth -= (st - SLAB_FIRST(PL_regmatch_slab) + 1);
+ PL_regmatch_slab = PL_regmatch_slab->prev;
+ st = SLAB_LAST(PL_regmatch_slab);
+ }
+ depth -= (st - yes_state);
+#endif
+ st = yes_state;
+ yes_state = st->u.yes.prev_yes_state;
+ PL_regmatch_state = st;
+
+ if (no_final) {
+ locinput= st->locinput;
+ nextchr = UCHARAT(locinput);
+ }
+ state_num = st->resume_state + no_final;
+ goto reenter_switch;
+ }
+
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch successful!%s\n",
+ PL_colors[4], PL_colors[5]));
+
+ if (PL_reg_eval_set) {
+ /* each successfully executed (?{...}) block does the equivalent of
+ * local $^R = do {...}
+ * When popping the save stack, all these locals would be undone;
+ * bypass this by setting the outermost saved $^R to the latest
+ * value */
+ if (oreplsv != GvSV(PL_replgv))
+ sv_setsv(oreplsv, GvSV(PL_replgv));
+ }
+ result = 1;
+ goto final_exit;
+
+no:
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %sfailed...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4], PL_colors[5])
+ );
+
+no_silent:
+ if (no_final) {
+ if (yes_state) {
+ goto yes;
+ } else {
+ goto final_exit;
+ }
+ }
+ if (depth) {
+ /* there's a previous state to backtrack to */
+ st--;
+ if (st < SLAB_FIRST(PL_regmatch_slab)) {
+ PL_regmatch_slab = PL_regmatch_slab->prev;
+ st = SLAB_LAST(PL_regmatch_slab);
+ }
+ PL_regmatch_state = st;
+ locinput= st->locinput;
+ nextchr = UCHARAT(locinput);
+
+ DEBUG_STATE_pp("pop");
+ depth--;
+ if (yes_state == st)
+ yes_state = st->u.yes.prev_yes_state;
+
+ state_num = st->resume_state + 1; /* failure = success + 1 */
+ goto reenter_switch;
+ }
+ result = 0;
+
+ final_exit:
+ if (rex->intflags & PREGf_VERBARG_SEEN) {
+ SV *sv_err = get_sv("REGERROR", 1);
+ SV *sv_mrk = get_sv("REGMARK", 1);
+ if (result) {
+ sv_commit = &PL_sv_no;
+ if (!sv_yes_mark)
+ sv_yes_mark = &PL_sv_yes;
+ } else {
+ if (!sv_commit)
+ sv_commit = &PL_sv_yes;
+ sv_yes_mark = &PL_sv_no;
+ }
+ sv_setsv(sv_err, sv_commit);
+ sv_setsv(sv_mrk, sv_yes_mark);
+ }
+
+ /* clean up; in particular, free all slabs above current one */
+ LEAVE_SCOPE(oldsave);
+
+ return result;
+}
+
+/*
+ - regrepeat - repeatedly match something simple, report how many
+ */
+/*
+ * [This routine now assumes that it will only match on things of length 1.
+ * That was true before, but now we assume scan - reginput is the count,
+ * rather than incrementing count on every character. [Er, except utf8.]]
+ */
+STATIC I32
+S_regrepeat(pTHX_ const regexp *prog, const regnode *p, I32 max, int depth)
+{
+ dVAR;
+ register char *scan;
+ register I32 c;
+ register char *loceol = PL_regeol;
+ register I32 hardcount = 0;
+ register bool utf8_target = PL_reg_match_utf8;
+ UV utf8_flags;
+#ifndef DEBUGGING
+ PERL_UNUSED_ARG(depth);
+#endif
+
+ PERL_ARGS_ASSERT_REGREPEAT;
+
+ scan = PL_reginput;
+ if (max == REG_INFTY)
+ max = I32_MAX;
+ else if (max < loceol - scan)
+ loceol = scan + max;
+ switch (OP(p)) {
+ case REG_ANY:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (scan < loceol && hardcount < max && *scan != '\n') {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && *scan != '\n')
+ scan++;
+ }
+ break;
+ case SANY:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (scan < loceol && hardcount < max) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ }
+ else
+ scan = loceol;
+ break;
+ case CANY:
+ scan = loceol;
+ break;
+ case EXACT:
+ /* To get here, EXACTish nodes must have *byte* length == 1. That
+ * means they match only characters in the string that can be expressed
+ * as a single byte. For non-utf8 strings, that means a simple match.
+ * For utf8 strings, the character matched must be an invariant, or
+ * downgradable to a single byte. The pattern's utf8ness is
+ * irrelevant, as since it's a single byte, it either isn't utf8, or if
+ * it is, it's an invariant */
+
+ c = (U8)*STRING(p);
+ assert(! UTF_PATTERN || UNI_IS_INVARIANT(c));
+
+ if (! utf8_target || UNI_IS_INVARIANT(c)) {
+ while (scan < loceol && UCHARAT(scan) == c) {
+ scan++;
+ }
+ }
+ else {
+
+ /* Here, the string is utf8, and the pattern char is different
+ * in utf8 than not, so can't compare them directly. Outside the
+ * loop, find the two utf8 bytes that represent c, and then
+ * look for those in sequence in the utf8 string */
+ U8 high = UTF8_TWO_BYTE_HI(c);
+ U8 low = UTF8_TWO_BYTE_LO(c);
+ loceol = PL_regeol;
+
+ while (hardcount < max
+ && scan + 1 < loceol
+ && UCHARAT(scan) == high
+ && UCHARAT(scan + 1) == low)
+ {
+ scan += 2;
+ hardcount++;
+ }
+ }
+ break;
+ case EXACTFA:
+ utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_exactf;
+
+ case EXACTFL:
+ PL_reg_flags |= RF_tainted;
+ utf8_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_exactf;
+
+ case EXACTF:
+ utf8_flags = 0;
+ goto do_exactf;
+
+ case EXACTFU_SS:
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU:
+ utf8_flags = (UTF_PATTERN) ? FOLDEQ_S2_ALREADY_FOLDED : 0;
+
+ /* The comments for the EXACT case above apply as well to these fold
+ * ones */
+
+ do_exactf:
+ c = (U8)*STRING(p);
+ assert(! UTF_PATTERN || UNI_IS_INVARIANT(c));
+
+ if (utf8_target || OP(p) == EXACTFU_SS) { /* Use full Unicode fold matching */
+ char *tmpeol = loceol;
+ while (hardcount < max
+ && foldEQ_utf8_flags(scan, &tmpeol, 0, utf8_target,
+ STRING(p), NULL, 1, cBOOL(UTF_PATTERN), utf8_flags))
+ {
+ scan = tmpeol;
+ tmpeol = loceol;
+ hardcount++;
+ }
+
+ /* XXX Note that the above handles properly the German sharp s in
+ * the pattern matching ss in the string. But it doesn't handle
+ * properly cases where the string contains say 'LIGATURE ff' and
+ * the pattern is 'f+'. This would require, say, a new function or
+ * revised interface to foldEQ_utf8(), in which the maximum number
+ * of characters to match could be passed and it would return how
+ * many actually did. This is just one of many cases where
+ * multi-char folds don't work properly, and so the fix is being
+ * deferred */
+ }
+ else {
+ U8 folded;
+
+ /* Here, the string isn't utf8 and c is a single byte; and either
+ * the pattern isn't utf8 or c is an invariant, so its utf8ness
+ * doesn't affect c. Can just do simple comparisons for exact or
+ * fold matching. */
+ switch (OP(p)) {
+ case EXACTF: folded = PL_fold[c]; break;
+ case EXACTFA:
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU: folded = PL_fold_latin1[c]; break;
+ case EXACTFL: folded = PL_fold_locale[c]; break;
+ default: Perl_croak(aTHX_ "panic: Unexpected op %u", OP(p));
+ }
+ while (scan < loceol &&
+ (UCHARAT(scan) == c || UCHARAT(scan) == folded))
+ {
+ scan++;
+ }
+ }
+ break;
+ case ANYOFV:
+ case ANYOF:
+ if (utf8_target || OP(p) == ANYOFV) {
+ STRLEN inclasslen;
+ loceol = PL_regeol;
+ inclasslen = loceol - scan;
+ while (hardcount < max
+ && ((inclasslen = loceol - scan) > 0)
+ && reginclass(prog, p, (U8*)scan, &inclasslen, utf8_target))
+ {
+ scan += inclasslen;
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && REGINCLASS(prog, p, (U8*)scan))
+ scan++;
+ }
+ break;
+ case ALNUMU:
+ if (utf8_target) {
+ utf8_wordchar:
+ loceol = PL_regeol;
+ LOAD_UTF8_CHARCLASS_ALNUM();
+ while (hardcount < max && scan < loceol &&
+ swash_fetch(PL_utf8_alnum, (U8*)scan, utf8_target))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && isWORDCHAR_L1((U8) *scan)) {
+ scan++;
+ }
+ }
+ break;
+ case ALNUM:
+ if (utf8_target)
+ goto utf8_wordchar;
+ while (scan < loceol && isALNUM((U8) *scan)) {
+ scan++;
+ }
+ break;
+ case ALNUMA:
+ while (scan < loceol && isWORDCHAR_A((U8) *scan)) {
+ scan++;
+ }
+ break;
+ case ALNUML:
+ PL_reg_flags |= RF_tainted;
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol &&
+ isALNUM_LC_utf8((U8*)scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && isALNUM_LC(*scan))
+ scan++;
+ }
+ break;
+ case NALNUMU:
+ if (utf8_target) {
+
+ utf8_Nwordchar:
+
+ loceol = PL_regeol;
+ LOAD_UTF8_CHARCLASS_ALNUM();
+ while (hardcount < max && scan < loceol &&
+ ! swash_fetch(PL_utf8_alnum, (U8*)scan, utf8_target))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && ! isWORDCHAR_L1((U8) *scan)) {
+ scan++;
+ }
+ }
+ break;
+ case NALNUM:
+ if (utf8_target)
+ goto utf8_Nwordchar;
+ while (scan < loceol && ! isALNUM((U8) *scan)) {
+ scan++;
+ }
+ break;
+ case NALNUMA:
+ if (utf8_target) {
+ while (scan < loceol && ! isWORDCHAR_A((U8) *scan)) {
+ scan += UTF8SKIP(scan);
+ }
+ }
+ else {
+ while (scan < loceol && ! isWORDCHAR_A((U8) *scan)) {
+ scan++;
+ }
+ }
+ break;
+ case NALNUML:
+ PL_reg_flags |= RF_tainted;
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol &&
+ !isALNUM_LC_utf8((U8*)scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && !isALNUM_LC(*scan))
+ scan++;
+ }
+ break;
+ case SPACEU:
+ if (utf8_target) {
+
+ utf8_space:
+
+ loceol = PL_regeol;
+ LOAD_UTF8_CHARCLASS_SPACE();
+ while (hardcount < max && scan < loceol &&
+ (*scan == ' ' ||
+ swash_fetch(PL_utf8_space,(U8*)scan, utf8_target)))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+ }
+ else {
+ while (scan < loceol && isSPACE_L1((U8) *scan)) {
+ scan++;
+ }
+ break;
+ }
+ case SPACE:
+ if (utf8_target)
+ goto utf8_space;
+
+ while (scan < loceol && isSPACE((U8) *scan)) {
+ scan++;
+ }
+ break;
+ case SPACEA:
+ while (scan < loceol && isSPACE_A((U8) *scan)) {
+ scan++;
+ }
+ break;
+ case SPACEL:
+ PL_reg_flags |= RF_tainted;
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol &&
+ isSPACE_LC_utf8((U8*)scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && isSPACE_LC(*scan))
+ scan++;
+ }
+ break;
+ case NSPACEU:
+ if (utf8_target) {
+
+ utf8_Nspace:
+
+ loceol = PL_regeol;
+ LOAD_UTF8_CHARCLASS_SPACE();
+ while (hardcount < max && scan < loceol &&
+ ! (*scan == ' ' ||
+ swash_fetch(PL_utf8_space,(U8*)scan, utf8_target)))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+ }
+ else {
+ while (scan < loceol && ! isSPACE_L1((U8) *scan)) {
+ scan++;
+ }
+ }
+ break;
+ case NSPACE:
+ if (utf8_target)
+ goto utf8_Nspace;
+
+ while (scan < loceol && ! isSPACE((U8) *scan)) {
+ scan++;
+ }
+ break;
+ case NSPACEA:
+ if (utf8_target) {
+ while (scan < loceol && ! isSPACE_A((U8) *scan)) {
+ scan += UTF8SKIP(scan);
+ }
+ }
+ else {
+ while (scan < loceol && ! isSPACE_A((U8) *scan)) {
+ scan++;
+ }
+ }
+ break;
+ case NSPACEL:
+ PL_reg_flags |= RF_tainted;
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol &&
+ !isSPACE_LC_utf8((U8*)scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && !isSPACE_LC(*scan))
+ scan++;
+ }
+ break;
+ case DIGIT:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ LOAD_UTF8_CHARCLASS_DIGIT();
+ while (hardcount < max && scan < loceol &&
+ swash_fetch(PL_utf8_digit, (U8*)scan, utf8_target)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && isDIGIT(*scan))
+ scan++;
+ }
+ break;
+ case DIGITA:
+ while (scan < loceol && isDIGIT_A((U8) *scan)) {
+ scan++;
+ }
+ break;
+ case DIGITL:
+ PL_reg_flags |= RF_tainted;
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol &&
+ isDIGIT_LC_utf8((U8*)scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && isDIGIT_LC(*scan))
+ scan++;
+ }
+ break;
+ case NDIGIT:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ LOAD_UTF8_CHARCLASS_DIGIT();
+ while (hardcount < max && scan < loceol &&
+ !swash_fetch(PL_utf8_digit, (U8*)scan, utf8_target)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && !isDIGIT(*scan))
+ scan++;
+ }
+ break;
+ case NDIGITA:
+ if (utf8_target) {
+ while (scan < loceol && ! isDIGIT_A((U8) *scan)) {
+ scan += UTF8SKIP(scan);
+ }
+ }
+ else {
+ while (scan < loceol && ! isDIGIT_A((U8) *scan)) {
+ scan++;
+ }
+ }
+ break;
+ case NDIGITL:
+ PL_reg_flags |= RF_tainted;
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol &&
+ !isDIGIT_LC_utf8((U8*)scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && !isDIGIT_LC(*scan))
+ scan++;
+ }
+ break;
+ case LNBREAK:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol && (c=is_LNBREAK_utf8(scan))) {
+ scan += c;
+ hardcount++;
+ }
+ } else {
+ /*
+ LNBREAK can match two latin chars, which is ok,
+ because we have a null terminated string, but we
+ have to use hardcount in this situation
+ */
+ while (scan < loceol && (c=is_LNBREAK_latin1(scan))) {
+ scan+=c;
+ hardcount++;
+ }
+ }
+ break;
+ case HORIZWS:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol && (c=is_HORIZWS_utf8(scan))) {
+ scan += c;
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && is_HORIZWS_latin1(scan))
+ scan++;
+ }
+ break;
+ case NHORIZWS:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol && !is_HORIZWS_utf8(scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && !is_HORIZWS_latin1(scan))
+ scan++;
+
+ }
+ break;
+ case VERTWS:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol && (c=is_VERTWS_utf8(scan))) {
+ scan += c;
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && is_VERTWS_latin1(scan))
+ scan++;
+
+ }
+ break;
+ case NVERTWS:
+ if (utf8_target) {
+ loceol = PL_regeol;
+ while (hardcount < max && scan < loceol && !is_VERTWS_utf8(scan)) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && !is_VERTWS_latin1(scan))
+ scan++;
+
+ }
+ break;
+
+ default: /* Called on something of 0 width. */
+ break; /* So match right here or not at all. */
+ }
+
+ if (hardcount)
+ c = hardcount;
+ else
+ c = scan - PL_reginput;
+ PL_reginput = scan;
+
+ DEBUG_r({
+ GET_RE_DEBUG_FLAGS_DECL;
+ DEBUG_EXECUTE_r({
+ SV * const prop = sv_newmortal();
+ regprop(prog, prop, p);
+ PerlIO_printf(Perl_debug_log,
+ "%*s %s can match %"IVdf" times out of %"IVdf"...\n",
+ REPORT_CODE_OFF + depth*2, "", SvPVX_const(prop),(IV)c,(IV)max);
+ });
+ });
+
+ return(c);
+}
+
+
+#if !defined(PERL_IN_XSUB_RE) || defined(PLUGGABLE_RE_EXTENSION)
+/*
+- regclass_swash - prepare the utf8 swash. Wraps the shared core version to
+create a copy so that changes the caller makes won't change the shared one
+ */
+SV *
+Perl_regclass_swash(pTHX_ const regexp *prog, register const regnode* node, bool doinit, SV** listsvp, SV **altsvp)
+{
+ PERL_ARGS_ASSERT_REGCLASS_SWASH;
+ return newSVsv(core_regclass_swash(prog, node, doinit, listsvp, altsvp));
+}
+#endif
+
+STATIC SV *
+S_core_regclass_swash(pTHX_ const regexp *prog, register const regnode* node, bool doinit, SV** listsvp, SV **altsvp)
+{
+ /* Returns the swash for the input 'node' in the regex 'prog'.
+ * If <doinit> is true, will attempt to create the swash if not already
+ * done.
+ * If <listsvp> is non-null, will return the swash initialization string in
+ * it.
+ * If <altsvp> is non-null, will return the alternates to the regular swash
+ * in it
+ * Tied intimately to how regcomp.c sets up the data structure */
+
+ dVAR;
+ SV *sw = NULL;
+ SV *si = NULL;
+ SV *alt = NULL;
+ SV* invlist = NULL;
+
+ RXi_GET_DECL(prog,progi);
+ const struct reg_data * const data = prog ? progi->data : NULL;
+
+ PERL_ARGS_ASSERT_CORE_REGCLASS_SWASH;
+
+ assert(ANYOF_NONBITMAP(node));
+
+ if (data && data->count) {
+ const U32 n = ARG(node);
+
+ if (data->what[n] == 's') {
+ SV * const rv = MUTABLE_SV(data->data[n]);
+ AV * const av = MUTABLE_AV(SvRV(rv));
+ SV **const ary = AvARRAY(av);
+ bool invlist_has_user_defined_property;
+
+ si = *ary; /* ary[0] = the string to initialize the swash with */
+
+ /* Elements 3 and 4 are either both present or both absent. [3] is
+ * any inversion list generated at compile time; [4] indicates if
+ * that inversion list has any user-defined properties in it. */
+ if (av_len(av) >= 3) {
+ invlist = ary[3];
+ invlist_has_user_defined_property = cBOOL(SvUV(ary[4]));
+ }
+ else {
+ invlist = NULL;
+ invlist_has_user_defined_property = FALSE;
+ }
+
+ /* Element [1] is reserved for the set-up swash. If already there,
+ * return it; if not, create it and store it there */
+ if (SvROK(ary[1])) {
+ sw = ary[1];
+ }
+ else if (si && doinit) {
+
+ sw = _core_swash_init("utf8", /* the utf8 package */
+ "", /* nameless */
+ si,
+ 1, /* binary */
+ 0, /* not from tr/// */
+ FALSE, /* is error if can't find
+ property */
+ invlist,
+ invlist_has_user_defined_property);
+ (void)av_store(av, 1, sw);
+ }
+
+ /* Element [2] is for any multi-char folds. Note that is a
+ * fundamentally flawed design, because can't backtrack and try
+ * again. See [perl #89774] */
+ if (SvTYPE(ary[2]) == SVt_PVAV) {
+ alt = ary[2];
+ }
+ }
+ }
+
+ if (listsvp) {
+ SV* matches_string = newSVpvn("", 0);
+ SV** invlistsvp;
+
+ /* Use the swash, if any, which has to have incorporated into it all
+ * possibilities */
+ if ( sw
+ && SvROK(sw)
+ && SvTYPE(SvRV(sw)) == SVt_PVHV
+ && (invlistsvp = hv_fetchs(MUTABLE_HV(SvRV(sw)), "INVLIST", FALSE)))
+ {
+ invlist = *invlistsvp;
+ }
+ else if (si && si != &PL_sv_undef) {
+
+ /* If no swash, use the input nitialization string, if available */
+ sv_catsv(matches_string, si);
+ }
+
+ /* Add the inversion list to whatever we have. This may have come from
+ * the swash, or from an input parameter */
+ if (invlist) {
+ sv_catsv(matches_string, _invlist_contents(invlist));
+ }
+ *listsvp = matches_string;
+ }
+
+ if (altsvp)
+ *altsvp = alt;
+
+ return sw;
+}
+
+/*
+ - reginclass - determine if a character falls into a character class
+
+ n is the ANYOF regnode
+ p is the target string
+ lenp is pointer to the maximum number of bytes of how far to go in p
+ (This is assumed wthout checking to always be at least the current
+ character's size)
+ utf8_target tells whether p is in UTF-8.
+
+ Returns true if matched; false otherwise. If lenp is not NULL, on return
+ from a successful match, the value it points to will be updated to how many
+ bytes in p were matched. If there was no match, the value is undefined,
+ possibly changed from the input.
+
+ Note that this can be a synthetic start class, a combination of various
+ nodes, so things you think might be mutually exclusive, such as locale,
+ aren't. It can match both locale and non-locale
+
+ */
+
+STATIC bool
+S_reginclass(pTHX_ const regexp * const prog, register const regnode * const n, register const U8* const p, STRLEN* lenp, register const bool utf8_target)
+{
+ dVAR;
+ const char flags = ANYOF_FLAGS(n);
+ bool match = FALSE;
+ UV c = *p;
+ STRLEN c_len = 0;
+ STRLEN maxlen;
+
+ PERL_ARGS_ASSERT_REGINCLASS;
+
+ /* If c is not already the code point, get it */
+ if (utf8_target && !UTF8_IS_INVARIANT(c)) {
+ c = utf8n_to_uvchr(p, UTF8_MAXBYTES, &c_len,
+ (UTF8_ALLOW_DEFAULT & UTF8_ALLOW_ANYUV)
+ | UTF8_ALLOW_FFFF | UTF8_CHECK_ONLY);
+ /* see [perl #37836] for UTF8_ALLOW_ANYUV; [perl #38293] for
+ * UTF8_ALLOW_FFFF */
+ if (c_len == (STRLEN)-1)
+ Perl_croak(aTHX_ "Malformed UTF-8 character (fatal)");
+ }
+ else {
+ c_len = 1;
+ }
+
+ /* Use passed in max length, or one character if none passed in or less
+ * than one character. And assume will match just one character. This is
+ * overwritten later if matched more. */
+ if (lenp) {
+ maxlen = (*lenp > c_len) ? *lenp : c_len;
+ *lenp = c_len;
+
+ }
+ else {
+ maxlen = c_len;
+ }
+
+ /* If this character is potentially in the bitmap, check it */
+ if (c < 256) {
+ if (ANYOF_BITMAP_TEST(n, c))
+ match = TRUE;
+ else if (flags & ANYOF_NON_UTF8_LATIN1_ALL
+ && ! utf8_target
+ && ! isASCII(c))
+ {
+ match = TRUE;
+ }
+
+ else if (flags & ANYOF_LOCALE) {
+ PL_reg_flags |= RF_tainted;
+
+ if ((flags & ANYOF_LOC_NONBITMAP_FOLD)
+ && ANYOF_BITMAP_TEST(n, PL_fold_locale[c]))
+ {
+ match = TRUE;
+ }
+ else if (ANYOF_CLASS_TEST_ANY_SET(n) &&
+ ((ANYOF_CLASS_TEST(n, ANYOF_ALNUM) && isALNUM_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NALNUM) && !isALNUM_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_SPACE) && isSPACE_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NSPACE) && !isSPACE_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_DIGIT) && isDIGIT_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NDIGIT) && !isDIGIT_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_ALNUMC) && isALNUMC_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NALNUMC) && !isALNUMC_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_ALPHA) && isALPHA_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NALPHA) && !isALPHA_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_ASCII) && isASCII_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NASCII) && !isASCII_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_CNTRL) && isCNTRL_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NCNTRL) && !isCNTRL_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_GRAPH) && isGRAPH_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NGRAPH) && !isGRAPH_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_LOWER) && isLOWER_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NLOWER) && !isLOWER_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_PRINT) && isPRINT_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NPRINT) && !isPRINT_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_PUNCT) && isPUNCT_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NPUNCT) && !isPUNCT_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_UPPER) && isUPPER_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NUPPER) && !isUPPER_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_XDIGIT) && isXDIGIT(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NXDIGIT) && !isXDIGIT(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_PSXSPC) && isPSXSPC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NPSXSPC) && !isPSXSPC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_BLANK) && isBLANK_LC(c)) ||
+ (ANYOF_CLASS_TEST(n, ANYOF_NBLANK) && !isBLANK_LC(c))
+ ) /* How's that for a conditional? */
+ ) {
+ match = TRUE;
+ }
+ }
+ }
+
+ /* If the bitmap didn't (or couldn't) match, and something outside the
+ * bitmap could match, try that. Locale nodes specifiy completely the
+ * behavior of code points in the bit map (otherwise, a utf8 target would
+ * cause them to be treated as Unicode and not locale), except in
+ * the very unlikely event when this node is a synthetic start class, which
+ * could be a combination of locale and non-locale nodes. So allow locale
+ * to match for the synthetic start class, which will give a false
+ * positive that will be resolved when the match is done again as not part
+ * of the synthetic start class */
+ if (!match) {
+ if (utf8_target && (flags & ANYOF_UNICODE_ALL) && c >= 256) {
+ match = TRUE; /* Everything above 255 matches */
+ }
+ else if (ANYOF_NONBITMAP(n)
+ && ((flags & ANYOF_NONBITMAP_NON_UTF8)
+ || (utf8_target
+ && (c >=256
+ || (! (flags & ANYOF_LOCALE))
+ || (flags & ANYOF_IS_SYNTHETIC)))))
+ {
+ AV *av;
+ SV * const sw = core_regclass_swash(prog, n, TRUE, 0, (SV**)&av);
+
+ if (sw) {
+ U8 * utf8_p;
+ if (utf8_target) {
+ utf8_p = (U8 *) p;
+ } else {
+
+ /* Not utf8. Convert as much of the string as available up
+ * to the limit of how far the (single) character in the
+ * pattern can possibly match (no need to go further). If
+ * the node is a straight ANYOF or not folding, it can't
+ * match more than one. Otherwise, It can match up to how
+ * far a single char can fold to. Since not utf8, each
+ * character is a single byte, so the max it can be in
+ * bytes is the same as the max it can be in characters */
+ STRLEN len = (OP(n) == ANYOF
+ || ! (flags & ANYOF_LOC_NONBITMAP_FOLD))
+ ? 1
+ : (maxlen < UTF8_MAX_FOLD_CHAR_EXPAND)
+ ? maxlen
+ : UTF8_MAX_FOLD_CHAR_EXPAND;
+ utf8_p = bytes_to_utf8(p, &len);
+ }
+
+ if (swash_fetch(sw, utf8_p, TRUE))
+ match = TRUE;
+ else if (flags & ANYOF_LOC_NONBITMAP_FOLD) {
+
+ /* Here, we need to test if the fold of the target string
+ * matches. The non-multi char folds have all been moved to
+ * the compilation phase, and the multi-char folds have
+ * been stored by regcomp into 'av'; we linearly check to
+ * see if any match the target string (folded). We know
+ * that the originals were each one character, but we don't
+ * currently know how many characters/bytes each folded to,
+ * except we do know that there are small limits imposed by
+ * Unicode. XXX A performance enhancement would be to have
+ * regcomp.c store the max number of chars/bytes that are
+ * in an av entry, as, say the 0th element. Even better
+ * would be to have a hash of the few characters that can
+ * start a multi-char fold to the max number of chars of
+ * those folds.
+ *
+ * If there is a match, we will need to advance (if lenp is
+ * specified) the match pointer in the target string. But
+ * what we are comparing here isn't that string directly,
+ * but its fold, whose length may differ from the original.
+ * As we go along in constructing the fold, therefore, we
+ * create a map so that we know how many bytes in the
+ * source to advance given that we have matched a certain
+ * number of bytes in the fold. This map is stored in
+ * 'map_fold_len_back'. Let n mean the number of bytes in
+ * the fold of the first character that we are folding.
+ * Then map_fold_len_back[n] is set to the number of bytes
+ * in that first character. Similarly let m be the
+ * corresponding number for the second character to be
+ * folded. Then map_fold_len_back[n+m] is set to the
+ * number of bytes occupied by the first two source
+ * characters. ... */
+ U8 map_fold_len_back[UTF8_MAXBYTES_CASE+1] = { 0 };
+ U8 folded[UTF8_MAXBYTES_CASE+1];
+ STRLEN foldlen = 0; /* num bytes in fold of 1st char */
+ STRLEN total_foldlen = 0; /* num bytes in fold of all
+ chars */
+
+ if (OP(n) == ANYOF || maxlen == 1 || ! lenp || ! av) {
+
+ /* Here, only need to fold the first char of the target
+ * string. It the source wasn't utf8, is 1 byte long */
+ to_utf8_fold(utf8_p, folded, &foldlen);
+ total_foldlen = foldlen;
+ map_fold_len_back[foldlen] = (utf8_target)
+ ? UTF8SKIP(utf8_p)
+ : 1;
+ }
+ else {
+
+ /* Here, need to fold more than the first char. Do so
+ * up to the limits */
+ U8* source_ptr = utf8_p; /* The source for the fold
+ is the regex target
+ string */
+ U8* folded_ptr = folded;
+ U8* e = utf8_p + maxlen; /* Can't go beyond last
+ available byte in the
+ target string */
+ U8 i;
+ for (i = 0;
+ i < UTF8_MAX_FOLD_CHAR_EXPAND && source_ptr < e;
+ i++)
+ {
+
+ /* Fold the next character */
+ U8 this_char_folded[UTF8_MAXBYTES_CASE+1];
+ STRLEN this_char_foldlen;
+ to_utf8_fold(source_ptr,
+ this_char_folded,
+ &this_char_foldlen);
+
+ /* Bail if it would exceed the byte limit for
+ * folding a single char. */
+ if (this_char_foldlen + folded_ptr - folded >
+ UTF8_MAXBYTES_CASE)
+ {
+ break;
+ }
+
+ /* Add the fold of this character */
+ Copy(this_char_folded,
+ folded_ptr,
+ this_char_foldlen,
+ U8);
+ source_ptr += UTF8SKIP(source_ptr);
+ folded_ptr += this_char_foldlen;
+ total_foldlen = folded_ptr - folded;
+
+ /* Create map from the number of bytes in the fold
+ * back to the number of bytes in the source. If
+ * the source isn't utf8, the byte count is just
+ * the number of characters so far */
+ map_fold_len_back[total_foldlen]
+ = (utf8_target)
+ ? source_ptr - utf8_p
+ : i + 1;
+ }
+ *folded_ptr = '\0';
+ }
+
+
+ /* Do the linear search to see if the fold is in the list
+ * of multi-char folds. */
+ if (av) {
+ I32 i;
+ for (i = 0; i <= av_len(av); i++) {
+ SV* const sv = *av_fetch(av, i, FALSE);
+ STRLEN len;
+ const char * const s = SvPV_const(sv, len);
+
+ if (len <= total_foldlen
+ && memEQ(s, (char*)folded, len)
+
+ /* If 0, means matched a partial char. See
+ * [perl #90536] */
+ && map_fold_len_back[len])
+ {
+
+ /* Advance the target string ptr to account for
+ * this fold, but have to translate from the
+ * folded length to the corresponding source
+ * length. */
+ if (lenp) {
+ *lenp = map_fold_len_back[len];
+ }
+ match = TRUE;
+ break;
+ }
+ }
+ }
+ }
+
+ /* If we allocated a string above, free it */
+ if (! utf8_target) Safefree(utf8_p);
+ }
+ }
+ }
+
+ return (flags & ANYOF_INVERT) ? !match : match;
+}
+
+STATIC U8 *
+S_reghop3(U8 *s, I32 off, const U8* lim)
+{
+ /* return the position 'off' UTF-8 characters away from 's', forward if
+ * 'off' >= 0, backwards if negative. But don't go outside of position
+ * 'lim', which better be < s if off < 0 */
+
+ dVAR;
+
+ PERL_ARGS_ASSERT_REGHOP3;
+
+ if (off >= 0) {
+ while (off-- && s < lim) {
+ /* XXX could check well-formedness here */
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (off++ && s > lim) {
+ s--;
+ if (UTF8_IS_CONTINUED(*s)) {
+ while (s > lim && UTF8_IS_CONTINUATION(*s))
+ s--;
+ }
+ /* XXX could check well-formedness here */
+ }
+ }
+ return s;
+}
+
+#ifdef XXX_dmq
+/* there are a bunch of places where we use two reghop3's that should
+ be replaced with this routine. but since thats not done yet
+ we ifdef it out - dmq
+*/
+STATIC U8 *
+S_reghop4(U8 *s, I32 off, const U8* llim, const U8* rlim)
+{
+ dVAR;
+
+ PERL_ARGS_ASSERT_REGHOP4;
+
+ if (off >= 0) {
+ while (off-- && s < rlim) {
+ /* XXX could check well-formedness here */
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (off++ && s > llim) {
+ s--;
+ if (UTF8_IS_CONTINUED(*s)) {
+ while (s > llim && UTF8_IS_CONTINUATION(*s))
+ s--;
+ }
+ /* XXX could check well-formedness here */
+ }
+ }
+ return s;
+}
+#endif
+
+STATIC U8 *
+S_reghopmaybe3(U8* s, I32 off, const U8* lim)
+{
+ dVAR;
+
+ PERL_ARGS_ASSERT_REGHOPMAYBE3;
+
+ if (off >= 0) {
+ while (off-- && s < lim) {
+ /* XXX could check well-formedness here */
+ s += UTF8SKIP(s);
+ }
+ if (off >= 0)
+ return NULL;
+ }
+ else {
+ while (off++ && s > lim) {
+ s--;
+ if (UTF8_IS_CONTINUED(*s)) {
+ while (s > lim && UTF8_IS_CONTINUATION(*s))
+ s--;
+ }
+ /* XXX could check well-formedness here */
+ }
+ if (off <= 0)
+ return NULL;
+ }
+ return s;
+}
+
+static void
+restore_pos(pTHX_ void *arg)
+{
+ dVAR;
+ regexp * const rex = (regexp *)arg;
+ if (PL_reg_eval_set) {
+ if (PL_reg_oldsaved) {
+ rex->subbeg = PL_reg_oldsaved;
+ rex->sublen = PL_reg_oldsavedlen;
+#ifdef PERL_OLD_COPY_ON_WRITE
+ rex->saved_copy = PL_nrs;
+#endif
+ RXp_MATCH_COPIED_on(rex);
+ }
+ PL_reg_magic->mg_len = PL_reg_oldpos;
+ PL_reg_eval_set = 0;
+ PL_curpm = PL_reg_oldcurpm;
+ }
+}
+
+STATIC void
+S_to_utf8_substr(pTHX_ register regexp *prog)
+{
+ int i = 1;
+
+ PERL_ARGS_ASSERT_TO_UTF8_SUBSTR;
+
+ do {
+ if (prog->substrs->data[i].substr
+ && !prog->substrs->data[i].utf8_substr) {
+ SV* const sv = newSVsv(prog->substrs->data[i].substr);
+ prog->substrs->data[i].utf8_substr = sv;
+ sv_utf8_upgrade(sv);
+ if (SvVALID(prog->substrs->data[i].substr)) {
+ if (SvTAIL(prog->substrs->data[i].substr)) {
+ /* Trim the trailing \n that fbm_compile added last
+ time. */
+ SvCUR_set(sv, SvCUR(sv) - 1);
+ /* Whilst this makes the SV technically "invalid" (as its
+ buffer is no longer followed by "\0") when fbm_compile()
+ adds the "\n" back, a "\0" is restored. */
+ fbm_compile(sv, FBMcf_TAIL);
+ } else
+ fbm_compile(sv, 0);
+ }
+ if (prog->substrs->data[i].substr == prog->check_substr)
+ prog->check_utf8 = sv;
+ }
+ } while (i--);
+}
+
+STATIC void
+S_to_byte_substr(pTHX_ register regexp *prog)
+{
+ dVAR;
+ int i = 1;
+
+ PERL_ARGS_ASSERT_TO_BYTE_SUBSTR;
+
+ do {
+ if (prog->substrs->data[i].utf8_substr
+ && !prog->substrs->data[i].substr) {
+ SV* sv = newSVsv(prog->substrs->data[i].utf8_substr);
+ if (sv_utf8_downgrade(sv, TRUE)) {
+ if (SvVALID(prog->substrs->data[i].utf8_substr)) {
+ if (SvTAIL(prog->substrs->data[i].utf8_substr)) {
+ /* Trim the trailing \n that fbm_compile added last
+ time. */
+ SvCUR_set(sv, SvCUR(sv) - 1);
+ fbm_compile(sv, FBMcf_TAIL);
+ } else
+ fbm_compile(sv, 0);
+ }
+ } else {
+ SvREFCNT_dec(sv);
+ sv = &PL_sv_undef;
+ }
+ prog->substrs->data[i].substr = sv;
+ if (prog->substrs->data[i].utf8_substr == prog->check_utf8)
+ prog->check_substr = sv;
+ }
+ } while (i--);
+}
+
+/*
+ * Local variables:
+ * c-indentation-style: bsd
+ * c-basic-offset: 4
+ * indent-tabs-mode: t
+ * End:
+ *
+ * ex: set ts=8 sts=4 sw=4 noet:
+ */