--- /dev/null
+/* regexec.c
+ */
+
+/*
+ * One Ring to rule them all, One Ring to find them
+ &
+ * [p.v of _The Lord of the Rings_, opening poem]
+ * [p.50 of _The Lord of the Rings_, I/iii: "The Shadow of the Past"]
+ * [p.254 of _The Lord of the Rings_, II/ii: "The Council of Elrond"]
+ */
+
+/* This file contains functions for executing a regular expression. See
+ * also regcomp.c which funnily enough, contains functions for compiling
+ * a regular expression.
+ *
+ * This file is also copied at build time to ext/re/re_exec.c, where
+ * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
+ * This causes the main functions to be compiled under new names and with
+ * debugging support added, which makes "use re 'debug'" work.
+ */
+
+/* NOTE: this is derived from Henry Spencer's regexp code, and should not
+ * confused with the original package (see point 3 below). Thanks, Henry!
+ */
+
+/* Additional note: this code is very heavily munged from Henry's version
+ * in places. In some spots I've traded clarity for efficiency, so don't
+ * blame Henry for some of the lack of readability.
+ */
+
+/* The names of the functions have been changed from regcomp and
+ * regexec to pregcomp and pregexec in order to avoid conflicts
+ * with the POSIX routines of the same names.
+*/
+
+#ifdef PERL_EXT_RE_BUILD
+#include "re_top.h"
+#endif
+
+/* At least one required character in the target string is expressible only in
+ * UTF-8. */
+static const char* const non_utf8_target_but_utf8_required
+ = "Can't match, because target string needs to be in UTF-8\n";
+
+#define NON_UTF8_TARGET_BUT_UTF8_REQUIRED(target) STMT_START { \
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%s", non_utf8_target_but_utf8_required));\
+ goto target; \
+} STMT_END
+
+/*
+ * pregcomp and pregexec -- regsub and regerror are not used in perl
+ *
+ * Copyright (c) 1986 by University of Toronto.
+ * Written by Henry Spencer. Not derived from licensed software.
+ *
+ * Permission is granted to anyone to use this software for any
+ * purpose on any computer system, and to redistribute it freely,
+ * subject to the following restrictions:
+ *
+ * 1. The author is not responsible for the consequences of use of
+ * this software, no matter how awful, even if they arise
+ * from defects in it.
+ *
+ * 2. The origin of this software must not be misrepresented, either
+ * by explicit claim or by omission.
+ *
+ * 3. Altered versions must be plainly marked as such, and must not
+ * be misrepresented as being the original software.
+ *
+ **** Alterations to Henry's code are...
+ ****
+ **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ **** by Larry Wall and others
+ ****
+ **** You may distribute under the terms of either the GNU General Public
+ **** License or the Artistic License, as specified in the README file.
+ *
+ * Beware that some of this code is subtly aware of the way operator
+ * precedence is structured in regular expressions. Serious changes in
+ * regular-expression syntax might require a total rethink.
+ */
+#include "EXTERN.h"
+#define PERL_IN_REGEXEC_C
+#include "perl.h"
+#include "re_defs.h"
+
+#ifdef PERL_IN_XSUB_RE
+# include "re_comp.h"
+#else
+# include "regcomp.h"
+#endif
+
+#include "inline_invlist.c"
+#include "unicode_constants.h"
+
+#define HAS_NONLATIN1_FOLD_CLOSURE(i) _HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(i)
+
+#ifndef STATIC
+#define STATIC static
+#endif
+
+/* Valid for non-utf8 strings: avoids the reginclass
+ * call if there are no complications: i.e., if everything matchable is
+ * straight forward in the bitmap */
+#define REGINCLASS(prog,p,c) (ANYOF_FLAGS(p) ? reginclass(prog,p,c,0) \
+ : ANYOF_BITMAP_TEST(p,*(c)))
+
+/*
+ * Forwards.
+ */
+
+#define CHR_SVLEN(sv) (utf8_target ? sv_len_utf8(sv) : SvCUR(sv))
+#define CHR_DIST(a,b) (reginfo->is_utf8_target ? utf8_distance(a,b) : a - b)
+
+#define HOPc(pos,off) \
+ (char *)(reginfo->is_utf8_target \
+ ? reghop3((U8*)pos, off, \
+ (U8*)(off >= 0 ? reginfo->strend : reginfo->strbeg)) \
+ : (U8*)(pos + off))
+#define HOPBACKc(pos, off) \
+ (char*)(reginfo->is_utf8_target \
+ ? reghopmaybe3((U8*)pos, -off, (U8*)(reginfo->strbeg)) \
+ : (pos - off >= reginfo->strbeg) \
+ ? (U8*)pos - off \
+ : NULL)
+
+#define HOP3(pos,off,lim) (reginfo->is_utf8_target ? reghop3((U8*)(pos), off, (U8*)(lim)) : (U8*)(pos + off))
+#define HOP3c(pos,off,lim) ((char*)HOP3(pos,off,lim))
+
+
+#define NEXTCHR_EOS -10 /* nextchr has fallen off the end */
+#define NEXTCHR_IS_EOS (nextchr < 0)
+
+#define SET_nextchr \
+ nextchr = ((locinput < reginfo->strend) ? UCHARAT(locinput) : NEXTCHR_EOS)
+
+#define SET_locinput(p) \
+ locinput = (p); \
+ SET_nextchr
+
+
+#define LOAD_UTF8_CHARCLASS(swash_ptr, property_name) STMT_START { \
+ if (!swash_ptr) { \
+ U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST; \
+ swash_ptr = _core_swash_init("utf8", property_name, &PL_sv_undef, \
+ 1, 0, NULL, &flags); \
+ assert(swash_ptr); \
+ } \
+ } STMT_END
+
+/* If in debug mode, we test that a known character properly matches */
+#ifdef DEBUGGING
+# define LOAD_UTF8_CHARCLASS_DEBUG_TEST(swash_ptr, \
+ property_name, \
+ utf8_char_in_property) \
+ LOAD_UTF8_CHARCLASS(swash_ptr, property_name); \
+ assert(swash_fetch(swash_ptr, (U8 *) utf8_char_in_property, TRUE));
+#else
+# define LOAD_UTF8_CHARCLASS_DEBUG_TEST(swash_ptr, \
+ property_name, \
+ utf8_char_in_property) \
+ LOAD_UTF8_CHARCLASS(swash_ptr, property_name)
+#endif
+
+#define LOAD_UTF8_CHARCLASS_ALNUM() LOAD_UTF8_CHARCLASS_DEBUG_TEST( \
+ PL_utf8_swash_ptrs[_CC_WORDCHAR], \
+ swash_property_names[_CC_WORDCHAR], \
+ GREEK_SMALL_LETTER_IOTA_UTF8)
+
+#define LOAD_UTF8_CHARCLASS_GCB() /* Grapheme cluster boundaries */ \
+ STMT_START { \
+ LOAD_UTF8_CHARCLASS_DEBUG_TEST(PL_utf8_X_regular_begin, \
+ "_X_regular_begin", \
+ GREEK_SMALL_LETTER_IOTA_UTF8); \
+ LOAD_UTF8_CHARCLASS_DEBUG_TEST(PL_utf8_X_extend, \
+ "_X_extend", \
+ COMBINING_GRAVE_ACCENT_UTF8); \
+ } STMT_END
+
+#define PLACEHOLDER /* Something for the preprocessor to grab onto */
+/* TODO: Combine JUMPABLE and HAS_TEXT to cache OP(rn) */
+
+/* for use after a quantifier and before an EXACT-like node -- japhy */
+/* it would be nice to rework regcomp.sym to generate this stuff. sigh
+ *
+ * NOTE that *nothing* that affects backtracking should be in here, specifically
+ * VERBS must NOT be included. JUMPABLE is used to determine if we can ignore a
+ * node that is in between two EXACT like nodes when ascertaining what the required
+ * "follow" character is. This should probably be moved to regex compile time
+ * although it may be done at run time beause of the REF possibility - more
+ * investigation required. -- demerphq
+*/
+#define JUMPABLE(rn) ( \
+ OP(rn) == OPEN || \
+ (OP(rn) == CLOSE && (!cur_eval || cur_eval->u.eval.close_paren != ARG(rn))) || \
+ OP(rn) == EVAL || \
+ OP(rn) == SUSPEND || OP(rn) == IFMATCH || \
+ OP(rn) == PLUS || OP(rn) == MINMOD || \
+ OP(rn) == KEEPS || \
+ (PL_regkind[OP(rn)] == CURLY && ARG1(rn) > 0) \
+)
+#define IS_EXACT(rn) (PL_regkind[OP(rn)] == EXACT)
+
+#define HAS_TEXT(rn) ( IS_EXACT(rn) || PL_regkind[OP(rn)] == REF )
+
+#if 0
+/* Currently these are only used when PL_regkind[OP(rn)] == EXACT so
+ we don't need this definition. */
+#define IS_TEXT(rn) ( OP(rn)==EXACT || OP(rn)==REF || OP(rn)==NREF )
+#define IS_TEXTF(rn) ( OP(rn)==EXACTFU || OP(rn)==EXACTFU_SS || OP(rn)==EXACTFU_TRICKYFOLD || OP(rn)==EXACTFA || OP(rn)==EXACTF || OP(rn)==REFF || OP(rn)==NREFF )
+#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL || OP(rn)==REFFL || OP(rn)==NREFFL )
+
+#else
+/* ... so we use this as its faster. */
+#define IS_TEXT(rn) ( OP(rn)==EXACT )
+#define IS_TEXTFU(rn) ( OP(rn)==EXACTFU || OP(rn)==EXACTFU_SS || OP(rn)==EXACTFU_TRICKYFOLD || OP(rn) == EXACTFA)
+#define IS_TEXTF(rn) ( OP(rn)==EXACTF )
+#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL )
+
+#endif
+
+/*
+ Search for mandatory following text node; for lookahead, the text must
+ follow but for lookbehind (rn->flags != 0) we skip to the next step.
+*/
+#define FIND_NEXT_IMPT(rn) STMT_START { \
+ while (JUMPABLE(rn)) { \
+ const OPCODE type = OP(rn); \
+ if (type == SUSPEND || PL_regkind[type] == CURLY) \
+ rn = NEXTOPER(NEXTOPER(rn)); \
+ else if (type == PLUS) \
+ rn = NEXTOPER(rn); \
+ else if (type == IFMATCH) \
+ rn = (rn->flags == 0) ? NEXTOPER(NEXTOPER(rn)) : rn + ARG(rn); \
+ else rn += NEXT_OFF(rn); \
+ } \
+} STMT_END
+
+/* These constants are for finding GCB=LV and GCB=LVT in the CLUMP regnode.
+ * These are for the pre-composed Hangul syllables, which are all in a
+ * contiguous block and arranged there in such a way so as to facilitate
+ * alorithmic determination of their characteristics. As such, they don't need
+ * a swash, but can be determined by simple arithmetic. Almost all are
+ * GCB=LVT, but every 28th one is a GCB=LV */
+#define SBASE 0xAC00 /* Start of block */
+#define SCount 11172 /* Length of block */
+#define TCount 28
+
+#define SLAB_FIRST(s) (&(s)->states[0])
+#define SLAB_LAST(s) (&(s)->states[PERL_REGMATCH_SLAB_SLOTS-1])
+
+static void S_setup_eval_state(pTHX_ regmatch_info *const reginfo);
+static void S_cleanup_regmatch_info_aux(pTHX_ void *arg);
+static regmatch_state * S_push_slab(pTHX);
+
+#define REGCP_PAREN_ELEMS 3
+#define REGCP_OTHER_ELEMS 3
+#define REGCP_FRAME_ELEMS 1
+/* REGCP_FRAME_ELEMS are not part of the REGCP_OTHER_ELEMS and
+ * are needed for the regexp context stack bookkeeping. */
+
+STATIC CHECKPOINT
+S_regcppush(pTHX_ const regexp *rex, I32 parenfloor, U32 maxopenparen)
+{
+ dVAR;
+ const int retval = PL_savestack_ix;
+ const int paren_elems_to_push =
+ (maxopenparen - parenfloor) * REGCP_PAREN_ELEMS;
+ const UV total_elems = paren_elems_to_push + REGCP_OTHER_ELEMS;
+ const UV elems_shifted = total_elems << SAVE_TIGHT_SHIFT;
+ I32 p;
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_REGCPPUSH;
+
+ if (paren_elems_to_push < 0)
+ Perl_croak(aTHX_ "panic: paren_elems_to_push, %i < 0",
+ paren_elems_to_push);
+
+ if ((elems_shifted >> SAVE_TIGHT_SHIFT) != total_elems)
+ Perl_croak(aTHX_ "panic: paren_elems_to_push offset %"UVuf
+ " out of range (%lu-%ld)",
+ total_elems,
+ (unsigned long)maxopenparen,
+ (long)parenfloor);
+
+ SSGROW(total_elems + REGCP_FRAME_ELEMS);
+
+ DEBUG_BUFFERS_r(
+ if ((int)maxopenparen > (int)parenfloor)
+ PerlIO_printf(Perl_debug_log,
+ "rex=0x%"UVxf" offs=0x%"UVxf": saving capture indices:\n",
+ PTR2UV(rex),
+ PTR2UV(rex->offs)
+ );
+ );
+ for (p = parenfloor+1; p <= (I32)maxopenparen; p++) {
+/* REGCP_PARENS_ELEMS are pushed per pairs of parentheses. */
+ SSPUSHINT(rex->offs[p].end);
+ SSPUSHINT(rex->offs[p].start);
+ SSPUSHINT(rex->offs[p].start_tmp);
+ DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
+ " \\%"UVuf": %"IVdf"(%"IVdf")..%"IVdf"\n",
+ (UV)p,
+ (IV)rex->offs[p].start,
+ (IV)rex->offs[p].start_tmp,
+ (IV)rex->offs[p].end
+ ));
+ }
+/* REGCP_OTHER_ELEMS are pushed in any case, parentheses or no. */
+ SSPUSHINT(maxopenparen);
+ SSPUSHINT(rex->lastparen);
+ SSPUSHINT(rex->lastcloseparen);
+ SSPUSHUV(SAVEt_REGCONTEXT | elems_shifted); /* Magic cookie. */
+
+ return retval;
+}
+
+/* These are needed since we do not localize EVAL nodes: */
+#define REGCP_SET(cp) \
+ DEBUG_STATE_r( \
+ PerlIO_printf(Perl_debug_log, \
+ " Setting an EVAL scope, savestack=%"IVdf"\n", \
+ (IV)PL_savestack_ix)); \
+ cp = PL_savestack_ix
+
+#define REGCP_UNWIND(cp) \
+ DEBUG_STATE_r( \
+ if (cp != PL_savestack_ix) \
+ PerlIO_printf(Perl_debug_log, \
+ " Clearing an EVAL scope, savestack=%"IVdf"..%"IVdf"\n", \
+ (IV)(cp), (IV)PL_savestack_ix)); \
+ regcpblow(cp)
+
+#define UNWIND_PAREN(lp, lcp) \
+ for (n = rex->lastparen; n > lp; n--) \
+ rex->offs[n].end = -1; \
+ rex->lastparen = n; \
+ rex->lastcloseparen = lcp;
+
+
+STATIC void
+S_regcppop(pTHX_ regexp *rex, U32 *maxopenparen_p)
+{
+ dVAR;
+ UV i;
+ U32 paren;
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_REGCPPOP;
+
+ /* Pop REGCP_OTHER_ELEMS before the parentheses loop starts. */
+ i = SSPOPUV;
+ assert((i & SAVE_MASK) == SAVEt_REGCONTEXT); /* Check that the magic cookie is there. */
+ i >>= SAVE_TIGHT_SHIFT; /* Parentheses elements to pop. */
+ rex->lastcloseparen = SSPOPINT;
+ rex->lastparen = SSPOPINT;
+ *maxopenparen_p = SSPOPINT;
+
+ i -= REGCP_OTHER_ELEMS;
+ /* Now restore the parentheses context. */
+ DEBUG_BUFFERS_r(
+ if (i || rex->lastparen + 1 <= rex->nparens)
+ PerlIO_printf(Perl_debug_log,
+ "rex=0x%"UVxf" offs=0x%"UVxf": restoring capture indices to:\n",
+ PTR2UV(rex),
+ PTR2UV(rex->offs)
+ );
+ );
+ paren = *maxopenparen_p;
+ for ( ; i > 0; i -= REGCP_PAREN_ELEMS) {
+ I32 tmps;
+ rex->offs[paren].start_tmp = SSPOPINT;
+ rex->offs[paren].start = SSPOPINT;
+ tmps = SSPOPINT;
+ if (paren <= rex->lastparen)
+ rex->offs[paren].end = tmps;
+ DEBUG_BUFFERS_r( PerlIO_printf(Perl_debug_log,
+ " \\%"UVuf": %"IVdf"(%"IVdf")..%"IVdf"%s\n",
+ (UV)paren,
+ (IV)rex->offs[paren].start,
+ (IV)rex->offs[paren].start_tmp,
+ (IV)rex->offs[paren].end,
+ (paren > rex->lastparen ? "(skipped)" : ""));
+ );
+ paren--;
+ }
+#if 1
+ /* It would seem that the similar code in regtry()
+ * already takes care of this, and in fact it is in
+ * a better location to since this code can #if 0-ed out
+ * but the code in regtry() is needed or otherwise tests
+ * requiring null fields (pat.t#187 and split.t#{13,14}
+ * (as of patchlevel 7877) will fail. Then again,
+ * this code seems to be necessary or otherwise
+ * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
+ * --jhi updated by dapm */
+ for (i = rex->lastparen + 1; i <= rex->nparens; i++) {
+ if (i > *maxopenparen_p)
+ rex->offs[i].start = -1;
+ rex->offs[i].end = -1;
+ DEBUG_BUFFERS_r( PerlIO_printf(Perl_debug_log,
+ " \\%"UVuf": %s ..-1 undeffing\n",
+ (UV)i,
+ (i > *maxopenparen_p) ? "-1" : " "
+ ));
+ }
+#endif
+}
+
+/* restore the parens and associated vars at savestack position ix,
+ * but without popping the stack */
+
+STATIC void
+S_regcp_restore(pTHX_ regexp *rex, I32 ix, U32 *maxopenparen_p)
+{
+ I32 tmpix = PL_savestack_ix;
+ PL_savestack_ix = ix;
+ regcppop(rex, maxopenparen_p);
+ PL_savestack_ix = tmpix;
+}
+
+#define regcpblow(cp) LEAVE_SCOPE(cp) /* Ignores regcppush()ed data. */
+
+STATIC bool
+S_isFOO_lc(pTHX_ const U8 classnum, const U8 character)
+{
+ /* Returns a boolean as to whether or not 'character' is a member of the
+ * Posix character class given by 'classnum' that should be equivalent to a
+ * value in the typedef '_char_class_number'.
+ *
+ * Ideally this could be replaced by a just an array of function pointers
+ * to the C library functions that implement the macros this calls.
+ * However, to compile, the precise function signatures are required, and
+ * these may vary from platform to to platform. To avoid having to figure
+ * out what those all are on each platform, I (khw) am using this method,
+ * which adds an extra layer of function call overhead (unless the C
+ * optimizer strips it away). But we don't particularly care about
+ * performance with locales anyway. */
+
+ switch ((_char_class_number) classnum) {
+ case _CC_ENUM_ALPHANUMERIC: return isALPHANUMERIC_LC(character);
+ case _CC_ENUM_ALPHA: return isALPHA_LC(character);
+ case _CC_ENUM_ASCII: return isASCII_LC(character);
+ case _CC_ENUM_BLANK: return isBLANK_LC(character);
+ case _CC_ENUM_CASED: return isLOWER_LC(character)
+ || isUPPER_LC(character);
+ case _CC_ENUM_CNTRL: return isCNTRL_LC(character);
+ case _CC_ENUM_DIGIT: return isDIGIT_LC(character);
+ case _CC_ENUM_GRAPH: return isGRAPH_LC(character);
+ case _CC_ENUM_LOWER: return isLOWER_LC(character);
+ case _CC_ENUM_PRINT: return isPRINT_LC(character);
+ case _CC_ENUM_PSXSPC: return isPSXSPC_LC(character);
+ case _CC_ENUM_PUNCT: return isPUNCT_LC(character);
+ case _CC_ENUM_SPACE: return isSPACE_LC(character);
+ case _CC_ENUM_UPPER: return isUPPER_LC(character);
+ case _CC_ENUM_WORDCHAR: return isWORDCHAR_LC(character);
+ case _CC_ENUM_XDIGIT: return isXDIGIT_LC(character);
+ default: /* VERTSPACE should never occur in locales */
+ Perl_croak(aTHX_ "panic: isFOO_lc() has an unexpected character class '%d'", classnum);
+ }
+
+ assert(0); /* NOTREACHED */
+ return FALSE;
+}
+
+STATIC bool
+S_isFOO_utf8_lc(pTHX_ const U8 classnum, const U8* character)
+{
+ /* Returns a boolean as to whether or not the (well-formed) UTF-8-encoded
+ * 'character' is a member of the Posix character class given by 'classnum'
+ * that should be equivalent to a value in the typedef
+ * '_char_class_number'.
+ *
+ * This just calls isFOO_lc on the code point for the character if it is in
+ * the range 0-255. Outside that range, all characters avoid Unicode
+ * rules, ignoring any locale. So use the Unicode function if this class
+ * requires a swash, and use the Unicode macro otherwise. */
+
+ PERL_ARGS_ASSERT_ISFOO_UTF8_LC;
+
+ if (UTF8_IS_INVARIANT(*character)) {
+ return isFOO_lc(classnum, *character);
+ }
+ else if (UTF8_IS_DOWNGRADEABLE_START(*character)) {
+ return isFOO_lc(classnum,
+ TWO_BYTE_UTF8_TO_UNI(*character, *(character + 1)));
+ }
+
+ if (classnum < _FIRST_NON_SWASH_CC) {
+
+ /* Initialize the swash unless done already */
+ if (! PL_utf8_swash_ptrs[classnum]) {
+ U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
+ PL_utf8_swash_ptrs[classnum] = _core_swash_init("utf8",
+ swash_property_names[classnum], &PL_sv_undef, 1, 0, NULL, &flags);
+ }
+
+ return cBOOL(swash_fetch(PL_utf8_swash_ptrs[classnum], (U8 *)
+ character,
+ TRUE /* is UTF */ ));
+ }
+
+ switch ((_char_class_number) classnum) {
+ case _CC_ENUM_SPACE:
+ case _CC_ENUM_PSXSPC: return is_XPERLSPACE_high(character);
+
+ case _CC_ENUM_BLANK: return is_HORIZWS_high(character);
+ case _CC_ENUM_XDIGIT: return is_XDIGIT_high(character);
+ case _CC_ENUM_VERTSPACE: return is_VERTWS_high(character);
+ default: return 0; /* Things like CNTRL are always
+ below 256 */
+ }
+
+ assert(0); /* NOTREACHED */
+ return FALSE;
+}
+
+/*
+ * pregexec and friends
+ */
+
+#ifndef PERL_IN_XSUB_RE
+/*
+ - pregexec - match a regexp against a string
+ */
+I32
+Perl_pregexec(pTHX_ REGEXP * const prog, char* stringarg, char *strend,
+ char *strbeg, I32 minend, SV *screamer, U32 nosave)
+/* stringarg: the point in the string at which to begin matching */
+/* strend: pointer to null at end of string */
+/* strbeg: real beginning of string */
+/* minend: end of match must be >= minend bytes after stringarg. */
+/* screamer: SV being matched: only used for utf8 flag, pos() etc; string
+ * itself is accessed via the pointers above */
+/* nosave: For optimizations. */
+{
+ PERL_ARGS_ASSERT_PREGEXEC;
+
+ return
+ regexec_flags(prog, stringarg, strend, strbeg, minend, screamer, NULL,
+ nosave ? 0 : REXEC_COPY_STR);
+}
+#endif
+
+/*
+ * Need to implement the following flags for reg_anch:
+ *
+ * USE_INTUIT_NOML - Useful to call re_intuit_start() first
+ * USE_INTUIT_ML
+ * INTUIT_AUTORITATIVE_NOML - Can trust a positive answer
+ * INTUIT_AUTORITATIVE_ML
+ * INTUIT_ONCE_NOML - Intuit can match in one location only.
+ * INTUIT_ONCE_ML
+ *
+ * Another flag for this function: SECOND_TIME (so that float substrs
+ * with giant delta may be not rechecked).
+ */
+
+/* If SCREAM, then SvPVX_const(sv) should be compatible with strpos and strend.
+ Otherwise, only SvCUR(sv) is used to get strbeg. */
+
+/* XXXX Some places assume that there is a fixed substring.
+ An update may be needed if optimizer marks as "INTUITable"
+ RExen without fixed substrings. Similarly, it is assumed that
+ lengths of all the strings are no more than minlen, thus they
+ cannot come from lookahead.
+ (Or minlen should take into account lookahead.)
+ NOTE: Some of this comment is not correct. minlen does now take account
+ of lookahead/behind. Further research is required. -- demerphq
+
+*/
+
+/* A failure to find a constant substring means that there is no need to make
+ an expensive call to REx engine, thus we celebrate a failure. Similarly,
+ finding a substring too deep into the string means that fewer calls to
+ regtry() should be needed.
+
+ REx compiler's optimizer found 4 possible hints:
+ a) Anchored substring;
+ b) Fixed substring;
+ c) Whether we are anchored (beginning-of-line or \G);
+ d) First node (of those at offset 0) which may distinguish positions;
+ We use a)b)d) and multiline-part of c), and try to find a position in the
+ string which does not contradict any of them.
+ */
+
+/* Most of decisions we do here should have been done at compile time.
+ The nodes of the REx which we used for the search should have been
+ deleted from the finite automaton. */
+
+/* args:
+ * rx: the regex to match against
+ * sv: the SV being matched: only used for utf8 flag; the string
+ * itself is accessed via the pointers below. Note that on
+ * something like an overloaded SV, SvPOK(sv) may be false
+ * and the string pointers may point to something unrelated to
+ * the SV itself.
+ * strbeg: real beginning of string
+ * strpos: the point in the string at which to begin matching
+ * strend: pointer to the byte following the last char of the string
+ * flags currently unused; set to 0
+ * data: currently unused; set to NULL
+ */
+
+char *
+Perl_re_intuit_start(pTHX_
+ REGEXP * const rx,
+ SV *sv,
+ const char * const strbeg,
+ char *strpos,
+ char *strend,
+ const U32 flags,
+ re_scream_pos_data *data)
+{
+ dVAR;
+ struct regexp *const prog = ReANY(rx);
+ I32 start_shift = 0;
+ /* Should be nonnegative! */
+ I32 end_shift = 0;
+ char *s;
+ SV *check;
+ char *t;
+ const bool utf8_target = (sv && SvUTF8(sv)) ? 1 : 0; /* if no sv we have to assume bytes */
+ I32 ml_anch;
+ char *other_last = NULL; /* other substr checked before this */
+ char *check_at = NULL; /* check substr found at this pos */
+ char *checked_upto = NULL; /* how far into the string we have already checked using find_byclass*/
+ const I32 multiline = prog->extflags & RXf_PMf_MULTILINE;
+ RXi_GET_DECL(prog,progi);
+ regmatch_info reginfo_buf; /* create some info to pass to find_byclass */
+ regmatch_info *const reginfo = ®info_buf;
+#ifdef DEBUGGING
+ const char * const i_strpos = strpos;
+#endif
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_RE_INTUIT_START;
+ PERL_UNUSED_ARG(flags);
+ PERL_UNUSED_ARG(data);
+
+ /* CHR_DIST() would be more correct here but it makes things slow. */
+ if (prog->minlen > strend - strpos) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "String too short... [re_intuit_start]\n"));
+ goto fail;
+ }
+
+ reginfo->is_utf8_target = cBOOL(utf8_target);
+ reginfo->info_aux = NULL;
+ reginfo->strbeg = strbeg;
+ reginfo->strend = strend;
+ reginfo->is_utf8_pat = cBOOL(RX_UTF8(rx));
+ reginfo->intuit = 1;
+ /* not actually used within intuit, but zero for safety anyway */
+ reginfo->poscache_maxiter = 0;
+
+ if (utf8_target) {
+ if (!prog->check_utf8 && prog->check_substr)
+ to_utf8_substr(prog);
+ check = prog->check_utf8;
+ } else {
+ if (!prog->check_substr && prog->check_utf8) {
+ if (! to_byte_substr(prog)) {
+ NON_UTF8_TARGET_BUT_UTF8_REQUIRED(fail);
+ }
+ }
+ check = prog->check_substr;
+ }
+ if ((prog->extflags & RXf_ANCH) /* Match at beg-of-str or after \n */
+ && !(prog->extflags & RXf_ANCH_GPOS)) /* \G isn't a BOS or \n */
+ {
+ ml_anch = !( (prog->extflags & RXf_ANCH_SINGLE)
+ || ( (prog->extflags & RXf_ANCH_BOL)
+ && !multiline ) ); /* Check after \n? */
+
+ if (!ml_anch) {
+ if ( !(prog->intflags & PREGf_IMPLICIT) /* not a real BOL */
+ && (strpos != strbeg)) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Not at start...\n"));
+ goto fail;
+ }
+ if (prog->check_offset_min == prog->check_offset_max
+ && !(prog->extflags & RXf_CANY_SEEN)
+ && ! multiline) /* /m can cause \n's to match that aren't
+ accounted for in the string max length.
+ See [perl #115242] */
+ {
+ /* Substring at constant offset from beg-of-str... */
+ I32 slen;
+
+ s = HOP3c(strpos, prog->check_offset_min, strend);
+
+ if (SvTAIL(check)) {
+ slen = SvCUR(check); /* >= 1 */
+
+ if ( strend - s > slen || strend - s < slen - 1
+ || (strend - s == slen && strend[-1] != '\n')) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "String too long...\n"));
+ goto fail_finish;
+ }
+ /* Now should match s[0..slen-2] */
+ slen--;
+ if (slen && (*SvPVX_const(check) != *s
+ || (slen > 1
+ && memNE(SvPVX_const(check), s, slen)))) {
+ report_neq:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "String not equal...\n"));
+ goto fail_finish;
+ }
+ }
+ else if (*SvPVX_const(check) != *s
+ || ((slen = SvCUR(check)) > 1
+ && memNE(SvPVX_const(check), s, slen)))
+ goto report_neq;
+ check_at = s;
+ goto success_at_start;
+ }
+ }
+ /* Match is anchored, but substr is not anchored wrt beg-of-str. */
+ s = strpos;
+ start_shift = prog->check_offset_min; /* okay to underestimate on CC */
+ end_shift = prog->check_end_shift;
+
+ if (!ml_anch) {
+ const I32 end = prog->check_offset_max + CHR_SVLEN(check)
+ - (SvTAIL(check) != 0);
+ const I32 eshift = CHR_DIST((U8*)strend, (U8*)s) - end;
+
+ if (end_shift < eshift)
+ end_shift = eshift;
+ }
+ }
+ else { /* Can match at random position */
+ ml_anch = 0;
+ s = strpos;
+ start_shift = prog->check_offset_min; /* okay to underestimate on CC */
+ end_shift = prog->check_end_shift;
+
+ /* end shift should be non negative here */
+ }
+
+#ifdef QDEBUGGING /* 7/99: reports of failure (with the older version) */
+ if (end_shift < 0)
+ Perl_croak(aTHX_ "panic: end_shift: %"IVdf" pattern:\n%s\n ",
+ (IV)end_shift, RX_PRECOMP(prog));
+#endif
+
+ restart:
+ /* Find a possible match in the region s..strend by looking for
+ the "check" substring in the region corrected by start/end_shift. */
+
+ {
+ I32 srch_start_shift = start_shift;
+ I32 srch_end_shift = end_shift;
+ U8* start_point;
+ U8* end_point;
+ if (srch_start_shift < 0 && strbeg - s > srch_start_shift) {
+ srch_end_shift -= ((strbeg - s) - srch_start_shift);
+ srch_start_shift = strbeg - s;
+ }
+ DEBUG_OPTIMISE_MORE_r({
+ PerlIO_printf(Perl_debug_log, "Check offset min: %"IVdf" Start shift: %"IVdf" End shift %"IVdf" Real End Shift: %"IVdf"\n",
+ (IV)prog->check_offset_min,
+ (IV)srch_start_shift,
+ (IV)srch_end_shift,
+ (IV)prog->check_end_shift);
+ });
+
+ if (prog->extflags & RXf_CANY_SEEN) {
+ start_point= (U8*)(s + srch_start_shift);
+ end_point= (U8*)(strend - srch_end_shift);
+ } else {
+ start_point= HOP3(s, srch_start_shift, srch_start_shift < 0 ? strbeg : strend);
+ end_point= HOP3(strend, -srch_end_shift, strbeg);
+ }
+ DEBUG_OPTIMISE_MORE_r({
+ PerlIO_printf(Perl_debug_log, "fbm_instr len=%d str=<%.*s>\n",
+ (int)(end_point - start_point),
+ (int)(end_point - start_point) > 20 ? 20 : (int)(end_point - start_point),
+ start_point);
+ });
+
+ s = fbm_instr( start_point, end_point,
+ check, multiline ? FBMrf_MULTILINE : 0);
+ }
+ /* Update the count-of-usability, remove useless subpatterns,
+ unshift s. */
+
+ DEBUG_EXECUTE_r({
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(check), RE_SV_DUMPLEN(check), 30);
+ PerlIO_printf(Perl_debug_log, "%s %s substr %s%s%s",
+ (s ? "Found" : "Did not find"),
+ (check == (utf8_target ? prog->anchored_utf8 : prog->anchored_substr)
+ ? "anchored" : "floating"),
+ quoted,
+ RE_SV_TAIL(check),
+ (s ? " at offset " : "...\n") );
+ });
+
+ if (!s)
+ goto fail_finish;
+ /* Finish the diagnostic message */
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%ld...\n", (long)(s - i_strpos)) );
+
+ /* XXX dmq: first branch is for positive lookbehind...
+ Our check string is offset from the beginning of the pattern.
+ So we need to do any stclass tests offset forward from that
+ point. I think. :-(
+ */
+
+
+
+ check_at=s;
+
+
+ /* Got a candidate. Check MBOL anchoring, and the *other* substr.
+ Start with the other substr.
+ XXXX no SCREAM optimization yet - and a very coarse implementation
+ XXXX /ttx+/ results in anchored="ttx", floating="x". floating will
+ *always* match. Probably should be marked during compile...
+ Probably it is right to do no SCREAM here...
+ */
+
+ if (utf8_target ? (prog->float_utf8 && prog->anchored_utf8)
+ : (prog->float_substr && prog->anchored_substr))
+ {
+ /* Take into account the "other" substring. */
+ /* XXXX May be hopelessly wrong for UTF... */
+ if (!other_last)
+ other_last = strpos;
+ if (check == (utf8_target ? prog->float_utf8 : prog->float_substr)) {
+ do_other_anchored:
+ {
+ char * const last = HOP3c(s, -start_shift, strbeg);
+ char *last1, *last2;
+ char * const saved_s = s;
+ SV* must;
+
+ t = s - prog->check_offset_max;
+ if (s - strpos > prog->check_offset_max /* signed-corrected t > strpos */
+ && (!utf8_target
+ || ((t = (char*)reghopmaybe3((U8*)s, -(prog->check_offset_max), (U8*)strpos))
+ && t > strpos)))
+ NOOP;
+ else
+ t = strpos;
+ t = HOP3c(t, prog->anchored_offset, strend);
+ if (t < other_last) /* These positions already checked */
+ t = other_last;
+ last2 = last1 = HOP3c(strend, -prog->minlen, strbeg);
+ if (last < last1)
+ last1 = last;
+ /* XXXX It is not documented what units *_offsets are in.
+ We assume bytes, but this is clearly wrong.
+ Meaning this code needs to be carefully reviewed for errors.
+ dmq.
+ */
+
+ /* On end-of-str: see comment below. */
+ must = utf8_target ? prog->anchored_utf8 : prog->anchored_substr;
+ if (must == &PL_sv_undef) {
+ s = (char*)NULL;
+ DEBUG_r(must = prog->anchored_utf8); /* for debug */
+ }
+ else
+ s = fbm_instr(
+ (unsigned char*)t,
+ HOP3(HOP3(last1, prog->anchored_offset, strend)
+ + SvCUR(must), -(SvTAIL(must)!=0), strbeg),
+ must,
+ multiline ? FBMrf_MULTILINE : 0
+ );
+ DEBUG_EXECUTE_r({
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
+ PerlIO_printf(Perl_debug_log, "%s anchored substr %s%s",
+ (s ? "Found" : "Contradicts"),
+ quoted, RE_SV_TAIL(must));
+ });
+
+
+ if (!s) {
+ if (last1 >= last2) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", giving up...\n"));
+ goto fail_finish;
+ }
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", trying floating at offset %ld...\n",
+ (long)(HOP3c(saved_s, 1, strend) - i_strpos)));
+ other_last = HOP3c(last1, prog->anchored_offset+1, strend);
+ s = HOP3c(last, 1, strend);
+ goto restart;
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, " at offset %ld...\n",
+ (long)(s - i_strpos)));
+ t = HOP3c(s, -prog->anchored_offset, strbeg);
+ other_last = HOP3c(s, 1, strend);
+ s = saved_s;
+ if (t == strpos)
+ goto try_at_start;
+ goto try_at_offset;
+ }
+ }
+ }
+ else { /* Take into account the floating substring. */
+ char *last, *last1;
+ char * const saved_s = s;
+ SV* must;
+
+ t = HOP3c(s, -start_shift, strbeg);
+ last1 = last =
+ HOP3c(strend, -prog->minlen + prog->float_min_offset, strbeg);
+ if (CHR_DIST((U8*)last, (U8*)t) > prog->float_max_offset)
+ last = HOP3c(t, prog->float_max_offset, strend);
+ s = HOP3c(t, prog->float_min_offset, strend);
+ if (s < other_last)
+ s = other_last;
+ /* XXXX It is not documented what units *_offsets are in. Assume bytes. */
+ must = utf8_target ? prog->float_utf8 : prog->float_substr;
+ /* fbm_instr() takes into account exact value of end-of-str
+ if the check is SvTAIL(ed). Since false positives are OK,
+ and end-of-str is not later than strend we are OK. */
+ if (must == &PL_sv_undef) {
+ s = (char*)NULL;
+ DEBUG_r(must = prog->float_utf8); /* for debug message */
+ }
+ else
+ s = fbm_instr((unsigned char*)s,
+ (unsigned char*)last + SvCUR(must)
+ - (SvTAIL(must)!=0),
+ must, multiline ? FBMrf_MULTILINE : 0);
+ DEBUG_EXECUTE_r({
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
+ PerlIO_printf(Perl_debug_log, "%s floating substr %s%s",
+ (s ? "Found" : "Contradicts"),
+ quoted, RE_SV_TAIL(must));
+ });
+ if (!s) {
+ if (last1 == last) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", giving up...\n"));
+ goto fail_finish;
+ }
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ ", trying anchored starting at offset %ld...\n",
+ (long)(saved_s + 1 - i_strpos)));
+ other_last = last;
+ s = HOP3c(t, 1, strend);
+ goto restart;
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, " at offset %ld...\n",
+ (long)(s - i_strpos)));
+ other_last = s; /* Fix this later. --Hugo */
+ s = saved_s;
+ if (t == strpos)
+ goto try_at_start;
+ goto try_at_offset;
+ }
+ }
+ }
+
+
+ t= (char*)HOP3( s, -prog->check_offset_max, (prog->check_offset_max<0) ? strend : strpos);
+
+ DEBUG_OPTIMISE_MORE_r(
+ PerlIO_printf(Perl_debug_log,
+ "Check offset min:%"IVdf" max:%"IVdf" S:%"IVdf" t:%"IVdf" D:%"IVdf" end:%"IVdf"\n",
+ (IV)prog->check_offset_min,
+ (IV)prog->check_offset_max,
+ (IV)(s-strpos),
+ (IV)(t-strpos),
+ (IV)(t-s),
+ (IV)(strend-strpos)
+ )
+ );
+
+ if (s - strpos > prog->check_offset_max /* signed-corrected t > strpos */
+ && (!utf8_target
+ || ((t = (char*)reghopmaybe3((U8*)s, -prog->check_offset_max, (U8*) ((prog->check_offset_max<0) ? strend : strpos)))
+ && t > strpos)))
+ {
+ /* Fixed substring is found far enough so that the match
+ cannot start at strpos. */
+ try_at_offset:
+ if (ml_anch && t[-1] != '\n') {
+ /* Eventually fbm_*() should handle this, but often
+ anchored_offset is not 0, so this check will not be wasted. */
+ /* XXXX In the code below we prefer to look for "^" even in
+ presence of anchored substrings. And we search even
+ beyond the found float position. These pessimizations
+ are historical artefacts only. */
+ find_anchor:
+ while (t < strend - prog->minlen) {
+ if (*t == '\n') {
+ if (t < check_at - prog->check_offset_min) {
+ if (utf8_target ? prog->anchored_utf8 : prog->anchored_substr) {
+ /* Since we moved from the found position,
+ we definitely contradict the found anchored
+ substr. Due to the above check we do not
+ contradict "check" substr.
+ Thus we can arrive here only if check substr
+ is float. Redo checking for "other"=="fixed".
+ */
+ strpos = t + 1;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m at offset %ld, rescanning for anchored from offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(strpos - i_strpos), (long)(strpos - i_strpos + prog->anchored_offset)));
+ goto do_other_anchored;
+ }
+ /* We don't contradict the found floating substring. */
+ /* XXXX Why not check for STCLASS? */
+ s = t + 1;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m at offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(s - i_strpos)));
+ goto set_useful;
+ }
+ /* Position contradicts check-string */
+ /* XXXX probably better to look for check-string
+ than for "\n", so one should lower the limit for t? */
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Found /%s^%s/m, restarting lookup for check-string at offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(t + 1 - i_strpos)));
+ other_last = strpos = s = t + 1;
+ goto restart;
+ }
+ t++;
+ }
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Did not find /%s^%s/m...\n",
+ PL_colors[0], PL_colors[1]));
+ goto fail_finish;
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Starting position does not contradict /%s^%s/m...\n",
+ PL_colors[0], PL_colors[1]));
+ }
+ s = t;
+ set_useful:
+ ++BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr); /* hooray/5 */
+ }
+ else {
+ /* The found string does not prohibit matching at strpos,
+ - no optimization of calling REx engine can be performed,
+ unless it was an MBOL and we are not after MBOL,
+ or a future STCLASS check will fail this. */
+ try_at_start:
+ /* Even in this situation we may use MBOL flag if strpos is offset
+ wrt the start of the string. */
+ if (ml_anch && (strpos != strbeg) && strpos[-1] != '\n'
+ /* May be due to an implicit anchor of m{.*foo} */
+ && !(prog->intflags & PREGf_IMPLICIT))
+ {
+ t = strpos;
+ goto find_anchor;
+ }
+ DEBUG_EXECUTE_r( if (ml_anch)
+ PerlIO_printf(Perl_debug_log, "Position at offset %ld does not contradict /%s^%s/m...\n",
+ (long)(strpos - i_strpos), PL_colors[0], PL_colors[1]);
+ );
+ success_at_start:
+ if (!(prog->intflags & PREGf_NAUGHTY) /* XXXX If strpos moved? */
+ && (utf8_target ? (
+ prog->check_utf8 /* Could be deleted already */
+ && --BmUSEFUL(prog->check_utf8) < 0
+ && (prog->check_utf8 == prog->float_utf8)
+ ) : (
+ prog->check_substr /* Could be deleted already */
+ && --BmUSEFUL(prog->check_substr) < 0
+ && (prog->check_substr == prog->float_substr)
+ )))
+ {
+ /* If flags & SOMETHING - do not do it many times on the same match */
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "... Disabling check substring...\n"));
+ /* XXX Does the destruction order has to change with utf8_target? */
+ SvREFCNT_dec(utf8_target ? prog->check_utf8 : prog->check_substr);
+ SvREFCNT_dec(utf8_target ? prog->check_substr : prog->check_utf8);
+ prog->check_substr = prog->check_utf8 = NULL; /* disable */
+ prog->float_substr = prog->float_utf8 = NULL; /* clear */
+ check = NULL; /* abort */
+ s = strpos;
+ /* XXXX If the check string was an implicit check MBOL, then we need to unset the relevant flag
+ see http://bugs.activestate.com/show_bug.cgi?id=87173 */
+ if (prog->intflags & PREGf_IMPLICIT)
+ prog->extflags &= ~RXf_ANCH_MBOL;
+ /* XXXX This is a remnant of the old implementation. It
+ looks wasteful, since now INTUIT can use many
+ other heuristics. */
+ prog->extflags &= ~RXf_USE_INTUIT;
+ /* XXXX What other flags might need to be cleared in this branch? */
+ }
+ else
+ s = strpos;
+ }
+
+ /* Last resort... */
+ /* XXXX BmUSEFUL already changed, maybe multiple change is meaningful... */
+ /* trie stclasses are too expensive to use here, we are better off to
+ leave it to regmatch itself */
+ if (progi->regstclass && PL_regkind[OP(progi->regstclass)]!=TRIE) {
+ /* minlen == 0 is possible if regstclass is \b or \B,
+ and the fixed substr is ''$.
+ Since minlen is already taken into account, s+1 is before strend;
+ accidentally, minlen >= 1 guaranties no false positives at s + 1
+ even for \b or \B. But (minlen? 1 : 0) below assumes that
+ regstclass does not come from lookahead... */
+ /* If regstclass takes bytelength more than 1: If charlength==1, OK.
+ This leaves EXACTF-ish only, which are dealt with in find_byclass(). */
+ const U8* const str = (U8*)STRING(progi->regstclass);
+ /* XXX this value could be pre-computed */
+ const int cl_l = (PL_regkind[OP(progi->regstclass)] == EXACT
+ ? (reginfo->is_utf8_pat
+ ? utf8_distance(str + STR_LEN(progi->regstclass), str)
+ : STR_LEN(progi->regstclass))
+ : 1);
+ char * endpos;
+ if (prog->anchored_substr || prog->anchored_utf8 || ml_anch)
+ endpos= HOP3c(s, (prog->minlen ? cl_l : 0), strend);
+ else if (prog->float_substr || prog->float_utf8)
+ endpos= HOP3c(HOP3c(check_at, -start_shift, strbeg), cl_l, strend);
+ else
+ endpos= strend;
+
+ if (checked_upto < s)
+ checked_upto = s;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "start_shift: %"IVdf" check_at: %"IVdf" s: %"IVdf" endpos: %"IVdf" checked_upto: %"IVdf"\n",
+ (IV)start_shift, (IV)(check_at - strbeg), (IV)(s - strbeg), (IV)(endpos - strbeg), (IV)(checked_upto- strbeg)));
+
+ t = s;
+ s = find_byclass(prog, progi->regstclass, checked_upto, endpos,
+ reginfo);
+ if (s) {
+ checked_upto = s;
+ } else {
+#ifdef DEBUGGING
+ const char *what = NULL;
+#endif
+ if (endpos == strend) {
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Could not match STCLASS...\n") );
+ goto fail;
+ }
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "This position contradicts STCLASS...\n") );
+ if ((prog->extflags & RXf_ANCH) && !ml_anch)
+ goto fail;
+ checked_upto = HOPBACKc(endpos, start_shift);
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "start_shift: %"IVdf" check_at: %"IVdf" endpos: %"IVdf" checked_upto: %"IVdf"\n",
+ (IV)start_shift, (IV)(check_at - strbeg), (IV)(endpos - strbeg), (IV)(checked_upto- strbeg)));
+ /* Contradict one of substrings */
+ if (prog->anchored_substr || prog->anchored_utf8) {
+ if ((utf8_target ? prog->anchored_utf8 : prog->anchored_substr) == check) {
+ DEBUG_EXECUTE_r( what = "anchored" );
+ hop_and_restart:
+ s = HOP3c(t, 1, strend);
+ if (s + start_shift + end_shift > strend) {
+ /* XXXX Should be taken into account earlier? */
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Could not match STCLASS...\n") );
+ goto fail;
+ }
+ if (!check)
+ goto giveup;
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Looking for %s substr starting at offset %ld...\n",
+ what, (long)(s + start_shift - i_strpos)) );
+ goto restart;
+ }
+ /* Have both, check_string is floating */
+ if (t + start_shift >= check_at) /* Contradicts floating=check */
+ goto retry_floating_check;
+ /* Recheck anchored substring, but not floating... */
+ s = check_at;
+ if (!check)
+ goto giveup;
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Looking for anchored substr starting at offset %ld...\n",
+ (long)(other_last - i_strpos)) );
+ goto do_other_anchored;
+ }
+ /* Another way we could have checked stclass at the
+ current position only: */
+ if (ml_anch) {
+ s = t = t + 1;
+ if (!check)
+ goto giveup;
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "Looking for /%s^%s/m starting at offset %ld...\n",
+ PL_colors[0], PL_colors[1], (long)(t - i_strpos)) );
+ goto try_at_offset;
+ }
+ if (!(utf8_target ? prog->float_utf8 : prog->float_substr)) /* Could have been deleted */
+ goto fail;
+ /* Check is floating substring. */
+ retry_floating_check:
+ t = check_at - start_shift;
+ DEBUG_EXECUTE_r( what = "floating" );
+ goto hop_and_restart;
+ }
+ if (t != s) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "By STCLASS: moving %ld --> %ld\n",
+ (long)(t - i_strpos), (long)(s - i_strpos))
+ );
+ }
+ else {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "Does not contradict STCLASS...\n");
+ );
+ }
+ }
+ giveup:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%s%s:%s match at offset %ld\n",
+ PL_colors[4], (check ? "Guessed" : "Giving up"),
+ PL_colors[5], (long)(s - i_strpos)) );
+ return s;
+
+ fail_finish: /* Substring not found */
+ if (prog->check_substr || prog->check_utf8) /* could be removed already */
+ BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr) += 5; /* hooray */
+ fail:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch rejected by optimizer%s\n",
+ PL_colors[4], PL_colors[5]));
+ return NULL;
+}
+
+#define DECL_TRIE_TYPE(scan) \
+ const enum { trie_plain, trie_utf8, trie_utf8_fold, trie_latin_utf8_fold } \
+ trie_type = ((scan->flags == EXACT) \
+ ? (utf8_target ? trie_utf8 : trie_plain) \
+ : (utf8_target ? trie_utf8_fold : trie_latin_utf8_fold))
+
+#define REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc, uscan, len, uvc, charid, foldlen, foldbuf, uniflags) \
+STMT_START { \
+ STRLEN skiplen; \
+ switch (trie_type) { \
+ case trie_utf8_fold: \
+ if ( foldlen>0 ) { \
+ uvc = utf8n_to_uvuni( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
+ foldlen -= len; \
+ uscan += len; \
+ len=0; \
+ } else { \
+ uvc = to_utf8_fold( (const U8*) uc, foldbuf, &foldlen ); \
+ len = UTF8SKIP(uc); \
+ skiplen = UNISKIP( uvc ); \
+ foldlen -= skiplen; \
+ uscan = foldbuf + skiplen; \
+ } \
+ break; \
+ case trie_latin_utf8_fold: \
+ if ( foldlen>0 ) { \
+ uvc = utf8n_to_uvuni( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
+ foldlen -= len; \
+ uscan += len; \
+ len=0; \
+ } else { \
+ len = 1; \
+ uvc = _to_fold_latin1( (U8) *uc, foldbuf, &foldlen, FOLD_FLAGS_FULL); \
+ skiplen = UNISKIP( uvc ); \
+ foldlen -= skiplen; \
+ uscan = foldbuf + skiplen; \
+ } \
+ break; \
+ case trie_utf8: \
+ uvc = utf8n_to_uvuni( (const U8*) uc, UTF8_MAXLEN, &len, uniflags ); \
+ break; \
+ case trie_plain: \
+ uvc = (UV)*uc; \
+ len = 1; \
+ } \
+ if (uvc < 256) { \
+ charid = trie->charmap[ uvc ]; \
+ } \
+ else { \
+ charid = 0; \
+ if (widecharmap) { \
+ SV** const svpp = hv_fetch(widecharmap, \
+ (char*)&uvc, sizeof(UV), 0); \
+ if (svpp) \
+ charid = (U16)SvIV(*svpp); \
+ } \
+ } \
+} STMT_END
+
+#define REXEC_FBC_EXACTISH_SCAN(CoNd) \
+STMT_START { \
+ while (s <= e) { \
+ if ( (CoNd) \
+ && (ln == 1 || folder(s, pat_string, ln)) \
+ && (reginfo->intuit || regtry(reginfo, &s)) )\
+ goto got_it; \
+ s++; \
+ } \
+} STMT_END
+
+#define REXEC_FBC_UTF8_SCAN(CoDe) \
+STMT_START { \
+ while (s < strend) { \
+ CoDe \
+ s += UTF8SKIP(s); \
+ } \
+} STMT_END
+
+#define REXEC_FBC_SCAN(CoDe) \
+STMT_START { \
+ while (s < strend) { \
+ CoDe \
+ s++; \
+ } \
+} STMT_END
+
+#define REXEC_FBC_UTF8_CLASS_SCAN(CoNd) \
+REXEC_FBC_UTF8_SCAN( \
+ if (CoNd) { \
+ if (tmp && (reginfo->intuit || regtry(reginfo, &s))) \
+ goto got_it; \
+ else \
+ tmp = doevery; \
+ } \
+ else \
+ tmp = 1; \
+)
+
+#define REXEC_FBC_CLASS_SCAN(CoNd) \
+REXEC_FBC_SCAN( \
+ if (CoNd) { \
+ if (tmp && (reginfo->intuit || regtry(reginfo, &s))) \
+ goto got_it; \
+ else \
+ tmp = doevery; \
+ } \
+ else \
+ tmp = 1; \
+)
+
+#define REXEC_FBC_TRYIT \
+if ((reginfo->intuit || regtry(reginfo, &s))) \
+ goto got_it
+
+#define REXEC_FBC_CSCAN(CoNdUtF8,CoNd) \
+ if (utf8_target) { \
+ REXEC_FBC_UTF8_CLASS_SCAN(CoNdUtF8); \
+ } \
+ else { \
+ REXEC_FBC_CLASS_SCAN(CoNd); \
+ }
+
+#define DUMP_EXEC_POS(li,s,doutf8) \
+ dump_exec_pos(li,s,(reginfo->strend),(reginfo->strbeg), \
+ startpos, doutf8)
+
+
+#define UTF8_NOLOAD(TEST_NON_UTF8, IF_SUCCESS, IF_FAIL) \
+ tmp = (s != reginfo->strbeg) ? UCHARAT(s - 1) : '\n'; \
+ tmp = TEST_NON_UTF8(tmp); \
+ REXEC_FBC_UTF8_SCAN( \
+ if (tmp == ! TEST_NON_UTF8((U8) *s)) { \
+ tmp = !tmp; \
+ IF_SUCCESS; \
+ } \
+ else { \
+ IF_FAIL; \
+ } \
+ ); \
+
+#define UTF8_LOAD(TeSt1_UtF8, TeSt2_UtF8, IF_SUCCESS, IF_FAIL) \
+ if (s == reginfo->strbeg) { \
+ tmp = '\n'; \
+ } \
+ else { \
+ U8 * const r = reghop3((U8*)s, -1, (U8*)reginfo->strbeg); \
+ tmp = utf8n_to_uvchr(r, UTF8SKIP(r), 0, UTF8_ALLOW_DEFAULT); \
+ } \
+ tmp = TeSt1_UtF8; \
+ LOAD_UTF8_CHARCLASS_ALNUM(); \
+ REXEC_FBC_UTF8_SCAN( \
+ if (tmp == ! (TeSt2_UtF8)) { \
+ tmp = !tmp; \
+ IF_SUCCESS; \
+ } \
+ else { \
+ IF_FAIL; \
+ } \
+ ); \
+
+/* The only difference between the BOUND and NBOUND cases is that
+ * REXEC_FBC_TRYIT is called when matched in BOUND, and when non-matched in
+ * NBOUND. This is accomplished by passing it in either the if or else clause,
+ * with the other one being empty */
+#define FBC_BOUND(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_LOAD(TEST1_UTF8, TEST2_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER), TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)
+
+#define FBC_BOUND_NOLOAD(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_NOLOAD(TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER), TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)
+
+#define FBC_NBOUND(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_LOAD(TEST1_UTF8, TEST2_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT), TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)
+
+#define FBC_NBOUND_NOLOAD(TEST_NON_UTF8, TEST1_UTF8, TEST2_UTF8) \
+ FBC_BOUND_COMMON(UTF8_NOLOAD(TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT), TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)
+
+
+/* Common to the BOUND and NBOUND cases. Unfortunately the UTF8 tests need to
+ * be passed in completely with the variable name being tested, which isn't
+ * such a clean interface, but this is easier to read than it was before. We
+ * are looking for the boundary (or non-boundary between a word and non-word
+ * character. The utf8 and non-utf8 cases have the same logic, but the details
+ * must be different. Find the "wordness" of the character just prior to this
+ * one, and compare it with the wordness of this one. If they differ, we have
+ * a boundary. At the beginning of the string, pretend that the previous
+ * character was a new-line */
+#define FBC_BOUND_COMMON(UTF8_CODE, TEST_NON_UTF8, IF_SUCCESS, IF_FAIL) \
+ if (utf8_target) { \
+ UTF8_CODE \
+ } \
+ else { /* Not utf8 */ \
+ tmp = (s != reginfo->strbeg) ? UCHARAT(s - 1) : '\n'; \
+ tmp = TEST_NON_UTF8(tmp); \
+ REXEC_FBC_SCAN( \
+ if (tmp == ! TEST_NON_UTF8((U8) *s)) { \
+ tmp = !tmp; \
+ IF_SUCCESS; \
+ } \
+ else { \
+ IF_FAIL; \
+ } \
+ ); \
+ } \
+ if ((!prog->minlen && tmp) && (reginfo->intuit || regtry(reginfo, &s))) \
+ goto got_it;
+
+/* We know what class REx starts with. Try to find this position... */
+/* if reginfo->intuit, its a dryrun */
+/* annoyingly all the vars in this routine have different names from their counterparts
+ in regmatch. /grrr */
+
+STATIC char *
+S_find_byclass(pTHX_ regexp * prog, const regnode *c, char *s,
+ const char *strend, regmatch_info *reginfo)
+{
+ dVAR;
+ const I32 doevery = (prog->intflags & PREGf_SKIP) == 0;
+ char *pat_string; /* The pattern's exactish string */
+ char *pat_end; /* ptr to end char of pat_string */
+ re_fold_t folder; /* Function for computing non-utf8 folds */
+ const U8 *fold_array; /* array for folding ords < 256 */
+ STRLEN ln;
+ STRLEN lnc;
+ U8 c1;
+ U8 c2;
+ char *e;
+ I32 tmp = 1; /* Scratch variable? */
+ const bool utf8_target = reginfo->is_utf8_target;
+ UV utf8_fold_flags = 0;
+ const bool is_utf8_pat = reginfo->is_utf8_pat;
+ bool to_complement = FALSE; /* Invert the result? Taking the xor of this
+ with a result inverts that result, as 0^1 =
+ 1 and 1^1 = 0 */
+ _char_class_number classnum;
+
+ RXi_GET_DECL(prog,progi);
+
+ PERL_ARGS_ASSERT_FIND_BYCLASS;
+
+ /* We know what class it must start with. */
+ switch (OP(c)) {
+ case ANYOF:
+ case ANYOF_SYNTHETIC:
+ case ANYOF_WARN_SUPER:
+ if (utf8_target) {
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ reginclass(prog, c, (U8*)s, utf8_target));
+ }
+ else {
+ REXEC_FBC_CLASS_SCAN(REGINCLASS(prog, c, (U8*)s));
+ }
+ break;
+ case CANY:
+ REXEC_FBC_SCAN(
+ if (tmp && (reginfo->intuit || regtry(reginfo, &s)))
+ goto got_it;
+ else
+ tmp = doevery;
+ );
+ break;
+
+ case EXACTFA:
+ if (is_utf8_pat || utf8_target) {
+ utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_exactf_utf8;
+ }
+ fold_array = PL_fold_latin1; /* Latin1 folds are not affected by */
+ folder = foldEQ_latin1; /* /a, except the sharp s one which */
+ goto do_exactf_non_utf8; /* isn't dealt with by these */
+
+ case EXACTF:
+ if (utf8_target) {
+
+ /* regcomp.c already folded this if pattern is in UTF-8 */
+ utf8_fold_flags = 0;
+ goto do_exactf_utf8;
+ }
+ fold_array = PL_fold;
+ folder = foldEQ;
+ goto do_exactf_non_utf8;
+
+ case EXACTFL:
+ if (is_utf8_pat || utf8_target) {
+ utf8_fold_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_exactf_utf8;
+ }
+ fold_array = PL_fold_locale;
+ folder = foldEQ_locale;
+ goto do_exactf_non_utf8;
+
+ case EXACTFU_SS:
+ if (is_utf8_pat) {
+ utf8_fold_flags = FOLDEQ_S2_ALREADY_FOLDED;
+ }
+ goto do_exactf_utf8;
+
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU:
+ if (is_utf8_pat || utf8_target) {
+ utf8_fold_flags = is_utf8_pat ? FOLDEQ_S2_ALREADY_FOLDED : 0;
+ goto do_exactf_utf8;
+ }
+
+ /* Any 'ss' in the pattern should have been replaced by regcomp,
+ * so we don't have to worry here about this single special case
+ * in the Latin1 range */
+ fold_array = PL_fold_latin1;
+ folder = foldEQ_latin1;
+
+ /* FALL THROUGH */
+
+ do_exactf_non_utf8: /* Neither pattern nor string are UTF8, and there
+ are no glitches with fold-length differences
+ between the target string and pattern */
+
+ /* The idea in the non-utf8 EXACTF* cases is to first find the
+ * first character of the EXACTF* node and then, if necessary,
+ * case-insensitively compare the full text of the node. c1 is the
+ * first character. c2 is its fold. This logic will not work for
+ * Unicode semantics and the german sharp ss, which hence should
+ * not be compiled into a node that gets here. */
+ pat_string = STRING(c);
+ ln = STR_LEN(c); /* length to match in octets/bytes */
+
+ /* We know that we have to match at least 'ln' bytes (which is the
+ * same as characters, since not utf8). If we have to match 3
+ * characters, and there are only 2 availabe, we know without
+ * trying that it will fail; so don't start a match past the
+ * required minimum number from the far end */
+ e = HOP3c(strend, -((I32)ln), s);
+
+ if (reginfo->intuit && e < s) {
+ e = s; /* Due to minlen logic of intuit() */
+ }
+
+ c1 = *pat_string;
+ c2 = fold_array[c1];
+ if (c1 == c2) { /* If char and fold are the same */
+ REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1);
+ }
+ else {
+ REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1 || *(U8*)s == c2);
+ }
+ break;
+
+ do_exactf_utf8:
+ {
+ unsigned expansion;
+
+ /* If one of the operands is in utf8, we can't use the simpler folding
+ * above, due to the fact that many different characters can have the
+ * same fold, or portion of a fold, or different- length fold */
+ pat_string = STRING(c);
+ ln = STR_LEN(c); /* length to match in octets/bytes */
+ pat_end = pat_string + ln;
+ lnc = is_utf8_pat /* length to match in characters */
+ ? utf8_length((U8 *) pat_string, (U8 *) pat_end)
+ : ln;
+
+ /* We have 'lnc' characters to match in the pattern, but because of
+ * multi-character folding, each character in the target can match
+ * up to 3 characters (Unicode guarantees it will never exceed
+ * this) if it is utf8-encoded; and up to 2 if not (based on the
+ * fact that the Latin 1 folds are already determined, and the
+ * only multi-char fold in that range is the sharp-s folding to
+ * 'ss'. Thus, a pattern character can match as little as 1/3 of a
+ * string character. Adjust lnc accordingly, rounding up, so that
+ * if we need to match at least 4+1/3 chars, that really is 5. */
+ expansion = (utf8_target) ? UTF8_MAX_FOLD_CHAR_EXPAND : 2;
+ lnc = (lnc + expansion - 1) / expansion;
+
+ /* As in the non-UTF8 case, if we have to match 3 characters, and
+ * only 2 are left, it's guaranteed to fail, so don't start a
+ * match that would require us to go beyond the end of the string
+ */
+ e = HOP3c(strend, -((I32)lnc), s);
+
+ if (reginfo->intuit && e < s) {
+ e = s; /* Due to minlen logic of intuit() */
+ }
+
+ /* XXX Note that we could recalculate e to stop the loop earlier,
+ * as the worst case expansion above will rarely be met, and as we
+ * go along we would usually find that e moves further to the left.
+ * This would happen only after we reached the point in the loop
+ * where if there were no expansion we should fail. Unclear if
+ * worth the expense */
+
+ while (s <= e) {
+ char *my_strend= (char *)strend;
+ if (foldEQ_utf8_flags(s, &my_strend, 0, utf8_target,
+ pat_string, NULL, ln, is_utf8_pat, utf8_fold_flags)
+ && (reginfo->intuit || regtry(reginfo, &s)) )
+ {
+ goto got_it;
+ }
+ s += (utf8_target) ? UTF8SKIP(s) : 1;
+ }
+ break;
+ }
+ case BOUNDL:
+ RXp_MATCH_TAINTED_on(prog);
+ FBC_BOUND(isWORDCHAR_LC,
+ isWORDCHAR_LC_uvchr(UNI_TO_NATIVE(tmp)),
+ isWORDCHAR_LC_utf8((U8*)s));
+ break;
+ case NBOUNDL:
+ RXp_MATCH_TAINTED_on(prog);
+ FBC_NBOUND(isWORDCHAR_LC,
+ isWORDCHAR_LC_uvchr(UNI_TO_NATIVE(tmp)),
+ isWORDCHAR_LC_utf8((U8*)s));
+ break;
+ case BOUND:
+ FBC_BOUND(isWORDCHAR,
+ isWORDCHAR_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_swash_ptrs[_CC_WORDCHAR], (U8*)s, utf8_target)));
+ break;
+ case BOUNDA:
+ FBC_BOUND_NOLOAD(isWORDCHAR_A,
+ isWORDCHAR_A(tmp),
+ isWORDCHAR_A((U8*)s));
+ break;
+ case NBOUND:
+ FBC_NBOUND(isWORDCHAR,
+ isWORDCHAR_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_swash_ptrs[_CC_WORDCHAR], (U8*)s, utf8_target)));
+ break;
+ case NBOUNDA:
+ FBC_NBOUND_NOLOAD(isWORDCHAR_A,
+ isWORDCHAR_A(tmp),
+ isWORDCHAR_A((U8*)s));
+ break;
+ case BOUNDU:
+ FBC_BOUND(isWORDCHAR_L1,
+ isWORDCHAR_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_swash_ptrs[_CC_WORDCHAR], (U8*)s, utf8_target)));
+ break;
+ case NBOUNDU:
+ FBC_NBOUND(isWORDCHAR_L1,
+ isWORDCHAR_uni(tmp),
+ cBOOL(swash_fetch(PL_utf8_swash_ptrs[_CC_WORDCHAR], (U8*)s, utf8_target)));
+ break;
+ case LNBREAK:
+ REXEC_FBC_CSCAN(is_LNBREAK_utf8_safe(s, strend),
+ is_LNBREAK_latin1_safe(s, strend)
+ );
+ break;
+
+ /* The argument to all the POSIX node types is the class number to pass to
+ * _generic_isCC() to build a mask for searching in PL_charclass[] */
+
+ case NPOSIXL:
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXL:
+ RXp_MATCH_TAINTED_on(prog);
+ REXEC_FBC_CSCAN(to_complement ^ cBOOL(isFOO_utf8_lc(FLAGS(c), (U8 *) s)),
+ to_complement ^ cBOOL(isFOO_lc(FLAGS(c), *s)));
+ break;
+
+ case NPOSIXD:
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXD:
+ if (utf8_target) {
+ goto posix_utf8;
+ }
+ goto posixa;
+
+ case NPOSIXA:
+ if (utf8_target) {
+ /* The complement of something that matches only ASCII matches all
+ * UTF-8 variant code points, plus everything in ASCII that isn't
+ * in the class */
+ REXEC_FBC_UTF8_CLASS_SCAN(! UTF8_IS_INVARIANT(*s)
+ || ! _generic_isCC_A(*s, FLAGS(c)));
+ break;
+ }
+
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXA:
+ posixa:
+ /* Don't need to worry about utf8, as it can match only a single
+ * byte invariant character. */
+ REXEC_FBC_CLASS_SCAN(
+ to_complement ^ cBOOL(_generic_isCC_A(*s, FLAGS(c))));
+ break;
+
+ case NPOSIXU:
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXU:
+ if (! utf8_target) {
+ REXEC_FBC_CLASS_SCAN(to_complement ^ cBOOL(_generic_isCC(*s,
+ FLAGS(c))));
+ }
+ else {
+
+ posix_utf8:
+ classnum = (_char_class_number) FLAGS(c);
+ if (classnum < _FIRST_NON_SWASH_CC) {
+ while (s < strend) {
+
+ /* We avoid loading in the swash as long as possible, but
+ * should we have to, we jump to a separate loop. This
+ * extra 'if' statement is what keeps this code from being
+ * just a call to REXEC_FBC_UTF8_CLASS_SCAN() */
+ if (UTF8_IS_ABOVE_LATIN1(*s)) {
+ goto found_above_latin1;
+ }
+ if ((UTF8_IS_INVARIANT(*s)
+ && to_complement ^ cBOOL(_generic_isCC((U8) *s,
+ classnum)))
+ || (UTF8_IS_DOWNGRADEABLE_START(*s)
+ && to_complement ^ cBOOL(
+ _generic_isCC(TWO_BYTE_UTF8_TO_UNI(*s, *(s + 1)),
+ classnum))))
+ {
+ if (tmp && (reginfo->intuit || regtry(reginfo, &s)))
+ goto got_it;
+ else {
+ tmp = doevery;
+ }
+ }
+ else {
+ tmp = 1;
+ }
+ s += UTF8SKIP(s);
+ }
+ }
+ else switch (classnum) { /* These classes are implemented as
+ macros */
+ case _CC_ENUM_SPACE: /* XXX would require separate code if we
+ revert the change of \v matching this */
+ /* FALL THROUGH */
+
+ case _CC_ENUM_PSXSPC:
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ to_complement ^ cBOOL(isSPACE_utf8(s)));
+ break;
+
+ case _CC_ENUM_BLANK:
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ to_complement ^ cBOOL(isBLANK_utf8(s)));
+ break;
+
+ case _CC_ENUM_XDIGIT:
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ to_complement ^ cBOOL(isXDIGIT_utf8(s)));
+ break;
+
+ case _CC_ENUM_VERTSPACE:
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ to_complement ^ cBOOL(isVERTWS_utf8(s)));
+ break;
+
+ case _CC_ENUM_CNTRL:
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ to_complement ^ cBOOL(isCNTRL_utf8(s)));
+ break;
+
+ default:
+ Perl_croak(aTHX_ "panic: find_byclass() node %d='%s' has an unexpected character class '%d'", OP(c), PL_reg_name[OP(c)], classnum);
+ assert(0); /* NOTREACHED */
+ }
+ }
+ break;
+
+ found_above_latin1: /* Here we have to load a swash to get the result
+ for the current code point */
+ if (! PL_utf8_swash_ptrs[classnum]) {
+ U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
+ PL_utf8_swash_ptrs[classnum] =
+ _core_swash_init("utf8", swash_property_names[classnum],
+ &PL_sv_undef, 1, 0, NULL, &flags);
+ }
+
+ /* This is a copy of the loop above for swash classes, though using the
+ * FBC macro instead of being expanded out. Since we've loaded the
+ * swash, we don't have to check for that each time through the loop */
+ REXEC_FBC_UTF8_CLASS_SCAN(
+ to_complement ^ cBOOL(_generic_utf8(
+ classnum,
+ s,
+ swash_fetch(PL_utf8_swash_ptrs[classnum],
+ (U8 *) s, TRUE))));
+ break;
+
+ case AHOCORASICKC:
+ case AHOCORASICK:
+ {
+ DECL_TRIE_TYPE(c);
+ /* what trie are we using right now */
+ reg_ac_data *aho = (reg_ac_data*)progi->data->data[ ARG( c ) ];
+ reg_trie_data *trie = (reg_trie_data*)progi->data->data[ aho->trie ];
+ HV *widecharmap = MUTABLE_HV(progi->data->data[ aho->trie + 1 ]);
+
+ const char *last_start = strend - trie->minlen;
+#ifdef DEBUGGING
+ const char *real_start = s;
+#endif
+ STRLEN maxlen = trie->maxlen;
+ SV *sv_points;
+ U8 **points; /* map of where we were in the input string
+ when reading a given char. For ASCII this
+ is unnecessary overhead as the relationship
+ is always 1:1, but for Unicode, especially
+ case folded Unicode this is not true. */
+ U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
+ U8 *bitmap=NULL;
+
+
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ /* We can't just allocate points here. We need to wrap it in
+ * an SV so it gets freed properly if there is a croak while
+ * running the match */
+ ENTER;
+ SAVETMPS;
+ sv_points=newSV(maxlen * sizeof(U8 *));
+ SvCUR_set(sv_points,
+ maxlen * sizeof(U8 *));
+ SvPOK_on(sv_points);
+ sv_2mortal(sv_points);
+ points=(U8**)SvPV_nolen(sv_points );
+ if ( trie_type != trie_utf8_fold
+ && (trie->bitmap || OP(c)==AHOCORASICKC) )
+ {
+ if (trie->bitmap)
+ bitmap=(U8*)trie->bitmap;
+ else
+ bitmap=(U8*)ANYOF_BITMAP(c);
+ }
+ /* this is the Aho-Corasick algorithm modified a touch
+ to include special handling for long "unknown char" sequences.
+ The basic idea being that we use AC as long as we are dealing
+ with a possible matching char, when we encounter an unknown char
+ (and we have not encountered an accepting state) we scan forward
+ until we find a legal starting char.
+ AC matching is basically that of trie matching, except that when
+ we encounter a failing transition, we fall back to the current
+ states "fail state", and try the current char again, a process
+ we repeat until we reach the root state, state 1, or a legal
+ transition. If we fail on the root state then we can either
+ terminate if we have reached an accepting state previously, or
+ restart the entire process from the beginning if we have not.
+
+ */
+ while (s <= last_start) {
+ const U32 uniflags = UTF8_ALLOW_DEFAULT;
+ U8 *uc = (U8*)s;
+ U16 charid = 0;
+ U32 base = 1;
+ U32 state = 1;
+ UV uvc = 0;
+ STRLEN len = 0;
+ STRLEN foldlen = 0;
+ U8 *uscan = (U8*)NULL;
+ U8 *leftmost = NULL;
+#ifdef DEBUGGING
+ U32 accepted_word= 0;
+#endif
+ U32 pointpos = 0;
+
+ while ( state && uc <= (U8*)strend ) {
+ int failed=0;
+ U32 word = aho->states[ state ].wordnum;
+
+ if( state==1 ) {
+ if ( bitmap ) {
+ DEBUG_TRIE_EXECUTE_r(
+ if ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
+ dump_exec_pos( (char *)uc, c, strend, real_start,
+ (char *)uc, utf8_target );
+ PerlIO_printf( Perl_debug_log,
+ " Scanning for legal start char...\n");
+ }
+ );
+ if (utf8_target) {
+ while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
+ uc += UTF8SKIP(uc);
+ }
+ } else {
+ while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
+ uc++;
+ }
+ }
+ s= (char *)uc;
+ }
+ if (uc >(U8*)last_start) break;
+ }
+
+ if ( word ) {
+ U8 *lpos= points[ (pointpos - trie->wordinfo[word].len) % maxlen ];
+ if (!leftmost || lpos < leftmost) {
+ DEBUG_r(accepted_word=word);
+ leftmost= lpos;
+ }
+ if (base==0) break;
+
+ }
+ points[pointpos++ % maxlen]= uc;
+ if (foldlen || uc < (U8*)strend) {
+ REXEC_TRIE_READ_CHAR(trie_type, trie,
+ widecharmap, uc,
+ uscan, len, uvc, charid, foldlen,
+ foldbuf, uniflags);
+ DEBUG_TRIE_EXECUTE_r({
+ dump_exec_pos( (char *)uc, c, strend,
+ real_start, s, utf8_target);
+ PerlIO_printf(Perl_debug_log,
+ " Charid:%3u CP:%4"UVxf" ",
+ charid, uvc);
+ });
+ }
+ else {
+ len = 0;
+ charid = 0;
+ }
+
+
+ do {
+#ifdef DEBUGGING
+ word = aho->states[ state ].wordnum;
+#endif
+ base = aho->states[ state ].trans.base;
+
+ DEBUG_TRIE_EXECUTE_r({
+ if (failed)
+ dump_exec_pos( (char *)uc, c, strend, real_start,
+ s, utf8_target );
+ PerlIO_printf( Perl_debug_log,
+ "%sState: %4"UVxf", word=%"UVxf,
+ failed ? " Fail transition to " : "",
+ (UV)state, (UV)word);
+ });
+ if ( base ) {
+ U32 tmp;
+ I32 offset;
+ if (charid &&
+ ( ((offset = base + charid
+ - 1 - trie->uniquecharcount)) >= 0)
+ && ((U32)offset < trie->lasttrans)
+ && trie->trans[offset].check == state
+ && (tmp=trie->trans[offset].next))
+ {
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log," - legal\n"));
+ state = tmp;
+ break;
+ }
+ else {
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log," - fail\n"));
+ failed = 1;
+ state = aho->fail[state];
+ }
+ }
+ else {
+ /* we must be accepting here */
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log," - accepting\n"));
+ failed = 1;
+ break;
+ }
+ } while(state);
+ uc += len;
+ if (failed) {
+ if (leftmost)
+ break;
+ if (!state) state = 1;
+ }
+ }
+ if ( aho->states[ state ].wordnum ) {
+ U8 *lpos = points[ (pointpos - trie->wordinfo[aho->states[ state ].wordnum].len) % maxlen ];
+ if (!leftmost || lpos < leftmost) {
+ DEBUG_r(accepted_word=aho->states[ state ].wordnum);
+ leftmost = lpos;
+ }
+ }
+ if (leftmost) {
+ s = (char*)leftmost;
+ DEBUG_TRIE_EXECUTE_r({
+ PerlIO_printf(
+ Perl_debug_log,"Matches word #%"UVxf" at position %"IVdf". Trying full pattern...\n",
+ (UV)accepted_word, (IV)(s - real_start)
+ );
+ });
+ if (reginfo->intuit || regtry(reginfo, &s)) {
+ FREETMPS;
+ LEAVE;
+ goto got_it;
+ }
+ s = HOPc(s,1);
+ DEBUG_TRIE_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,"Pattern failed. Looking for new start point...\n");
+ });
+ } else {
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log,"No match.\n"));
+ break;
+ }
+ }
+ FREETMPS;
+ LEAVE;
+ }
+ break;
+ default:
+ Perl_croak(aTHX_ "panic: unknown regstclass %d", (int)OP(c));
+ break;
+ }
+ return 0;
+ got_it:
+ return s;
+}
+
+/* set RX_SAVED_COPY, RX_SUBBEG etc.
+ * flags have same meanings as with regexec_flags() */
+
+static void
+S_reg_set_capture_string(pTHX_ REGEXP * const rx,
+ char *strbeg,
+ char *strend,
+ SV *sv,
+ U32 flags,
+ bool utf8_target)
+{
+ struct regexp *const prog = ReANY(rx);
+
+ if (flags & REXEC_COPY_STR) {
+#ifdef PERL_ANY_COW
+ if (SvCANCOW(sv)) {
+ if (DEBUG_C_TEST) {
+ PerlIO_printf(Perl_debug_log,
+ "Copy on write: regexp capture, type %d\n",
+ (int) SvTYPE(sv));
+ }
+ /* Create a new COW SV to share the match string and store
+ * in saved_copy, unless the current COW SV in saved_copy
+ * is valid and suitable for our purpose */
+ if (( prog->saved_copy
+ && SvIsCOW(prog->saved_copy)
+ && SvPOKp(prog->saved_copy)
+ && SvIsCOW(sv)
+ && SvPOKp(sv)
+ && SvPVX(sv) == SvPVX(prog->saved_copy)))
+ {
+ /* just reuse saved_copy SV */
+ if (RXp_MATCH_COPIED(prog)) {
+ Safefree(prog->subbeg);
+ RXp_MATCH_COPIED_off(prog);
+ }
+ }
+ else {
+ /* create new COW SV to share string */
+ RX_MATCH_COPY_FREE(rx);
+ prog->saved_copy = sv_setsv_cow(prog->saved_copy, sv);
+ }
+ prog->subbeg = (char *)SvPVX_const(prog->saved_copy);
+ assert (SvPOKp(prog->saved_copy));
+ prog->sublen = strend - strbeg;
+ prog->suboffset = 0;
+ prog->subcoffset = 0;
+ } else
+#endif
+ {
+ I32 min = 0;
+ I32 max = strend - strbeg;
+ I32 sublen;
+
+ if ( (flags & REXEC_COPY_SKIP_POST)
+ && !(prog->extflags & RXf_PMf_KEEPCOPY) /* //p */
+ && !(PL_sawampersand & SAWAMPERSAND_RIGHT)
+ ) { /* don't copy $' part of string */
+ U32 n = 0;
+ max = -1;
+ /* calculate the right-most part of the string covered
+ * by a capture. Due to look-ahead, this may be to
+ * the right of $&, so we have to scan all captures */
+ while (n <= prog->lastparen) {
+ if (prog->offs[n].end > max)
+ max = prog->offs[n].end;
+ n++;
+ }
+ if (max == -1)
+ max = (PL_sawampersand & SAWAMPERSAND_LEFT)
+ ? prog->offs[0].start
+ : 0;
+ assert(max >= 0 && max <= strend - strbeg);
+ }
+
+ if ( (flags & REXEC_COPY_SKIP_PRE)
+ && !(prog->extflags & RXf_PMf_KEEPCOPY) /* //p */
+ && !(PL_sawampersand & SAWAMPERSAND_LEFT)
+ ) { /* don't copy $` part of string */
+ U32 n = 0;
+ min = max;
+ /* calculate the left-most part of the string covered
+ * by a capture. Due to look-behind, this may be to
+ * the left of $&, so we have to scan all captures */
+ while (min && n <= prog->lastparen) {
+ if ( prog->offs[n].start != -1
+ && prog->offs[n].start < min)
+ {
+ min = prog->offs[n].start;
+ }
+ n++;
+ }
+ if ((PL_sawampersand & SAWAMPERSAND_RIGHT)
+ && min > prog->offs[0].end
+ )
+ min = prog->offs[0].end;
+
+ }
+
+ assert(min >= 0 && min <= max && min <= strend - strbeg);
+ sublen = max - min;
+
+ if (RX_MATCH_COPIED(rx)) {
+ if (sublen > prog->sublen)
+ prog->subbeg =
+ (char*)saferealloc(prog->subbeg, sublen+1);
+ }
+ else
+ prog->subbeg = (char*)safemalloc(sublen+1);
+ Copy(strbeg + min, prog->subbeg, sublen, char);
+ prog->subbeg[sublen] = '\0';
+ prog->suboffset = min;
+ prog->sublen = sublen;
+ RX_MATCH_COPIED_on(rx);
+ }
+ prog->subcoffset = prog->suboffset;
+ if (prog->suboffset && utf8_target) {
+ /* Convert byte offset to chars.
+ * XXX ideally should only compute this if @-/@+
+ * has been seen, a la PL_sawampersand ??? */
+
+ /* If there's a direct correspondence between the
+ * string which we're matching and the original SV,
+ * then we can use the utf8 len cache associated with
+ * the SV. In particular, it means that under //g,
+ * sv_pos_b2u() will use the previously cached
+ * position to speed up working out the new length of
+ * subcoffset, rather than counting from the start of
+ * the string each time. This stops
+ * $x = "\x{100}" x 1E6; 1 while $x =~ /(.)/g;
+ * from going quadratic */
+ if (SvPOKp(sv) && SvPVX(sv) == strbeg)
+ sv_pos_b2u(sv, &(prog->subcoffset));
+ else
+ prog->subcoffset = utf8_length((U8*)strbeg,
+ (U8*)(strbeg+prog->suboffset));
+ }
+ }
+ else {
+ RX_MATCH_COPY_FREE(rx);
+ prog->subbeg = strbeg;
+ prog->suboffset = 0;
+ prog->subcoffset = 0;
+ prog->sublen = strend - strbeg;
+ }
+}
+
+
+
+
+/*
+ - regexec_flags - match a regexp against a string
+ */
+I32
+Perl_regexec_flags(pTHX_ REGEXP * const rx, char *stringarg, char *strend,
+ char *strbeg, I32 minend, SV *sv, void *data, U32 flags)
+/* stringarg: the point in the string at which to begin matching */
+/* strend: pointer to null at end of string */
+/* strbeg: real beginning of string */
+/* minend: end of match must be >= minend bytes after stringarg. */
+/* sv: SV being matched: only used for utf8 flag, pos() etc; string
+ * itself is accessed via the pointers above */
+/* data: May be used for some additional optimizations.
+ Currently unused. */
+/* flags: For optimizations. See REXEC_* in regexp.h */
+
+{
+ dVAR;
+ struct regexp *const prog = ReANY(rx);
+ char *s;
+ regnode *c;
+ char *startpos;
+ I32 minlen; /* must match at least this many chars */
+ I32 dontbother = 0; /* how many characters not to try at end */
+ I32 end_shift = 0; /* Same for the end. */ /* CC */
+ const bool utf8_target = cBOOL(DO_UTF8(sv));
+ I32 multiline;
+ RXi_GET_DECL(prog,progi);
+ regmatch_info reginfo_buf; /* create some info to pass to regtry etc */
+ regmatch_info *const reginfo = ®info_buf;
+ regexp_paren_pair *swap = NULL;
+ I32 oldsave;
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_REGEXEC_FLAGS;
+ PERL_UNUSED_ARG(data);
+
+ /* Be paranoid... */
+ if (prog == NULL || stringarg == NULL) {
+ Perl_croak(aTHX_ "NULL regexp parameter");
+ return 0;
+ }
+
+ DEBUG_EXECUTE_r(
+ debug_start_match(rx, utf8_target, stringarg, strend,
+ "Matching");
+ );
+
+ startpos = stringarg;
+
+ if (prog->extflags & RXf_GPOS_SEEN) {
+ MAGIC *mg;
+
+ /* set reginfo->ganch, the position where \G can match */
+
+ reginfo->ganch =
+ (flags & REXEC_IGNOREPOS)
+ ? stringarg /* use start pos rather than pos() */
+ : (sv && (mg = mg_find_mglob(sv)) && mg->mg_len >= 0)
+ ? strbeg + mg->mg_len /* Defined pos() */
+ : strbeg; /* pos() not defined; use start of string */
+
+ DEBUG_GPOS_r(PerlIO_printf(Perl_debug_log,
+ "GPOS ganch set to strbeg[%"IVdf"]\n", reginfo->ganch - strbeg));
+
+ /* in the presence of \G, we may need to start looking earlier in
+ * the string than the suggested start point of stringarg:
+ * if gofs->prog is set, then that's a known, fixed minimum
+ * offset, such as
+ * /..\G/: gofs = 2
+ * /ab|c\G/: gofs = 1
+ * or if the minimum offset isn't known, then we have to go back
+ * to the start of the string, e.g. /w+\G/
+ */
+
+ if (prog->extflags & RXf_ANCH_GPOS) {
+ startpos = reginfo->ganch - prog->gofs;
+ if (startpos <
+ ((flags & REXEC_FAIL_ON_UNDERFLOW) ? stringarg : strbeg))
+ {
+ DEBUG_r(PerlIO_printf(Perl_debug_log,
+ "fail: ganch-gofs before earliest possible start\n"));
+ return 0;
+ }
+ }
+ else if (prog->gofs) {
+ if (startpos - prog->gofs < strbeg)
+ startpos = strbeg;
+ else
+ startpos -= prog->gofs;
+ }
+ else if (prog->extflags & RXf_GPOS_FLOAT)
+ startpos = strbeg;
+ }
+
+ minlen = prog->minlen;
+ if ((startpos + minlen) > strend || startpos < strbeg) {
+ DEBUG_r(PerlIO_printf(Perl_debug_log,
+ "Regex match can't succeed, so not even tried\n"));
+ return 0;
+ }
+
+ /* at the end of this function, we'll do a LEAVE_SCOPE(oldsave),
+ * which will call destuctors to reset PL_regmatch_state, free higher
+ * PL_regmatch_slabs, and clean up regmatch_info_aux and
+ * regmatch_info_aux_eval */
+
+ oldsave = PL_savestack_ix;
+
+ s = startpos;
+
+ if ((prog->extflags & RXf_USE_INTUIT)
+ && !(flags & REXEC_CHECKED))
+ {
+ s = re_intuit_start(rx, sv, strbeg, startpos, strend,
+ flags, NULL);
+ if (!s)
+ return 0;
+
+ if (prog->extflags & RXf_CHECK_ALL) {
+ /* we can match based purely on the result of INTUIT.
+ * Set up captures etc just for $& and $-[0]
+ * (an intuit-only match wont have $1,$2,..) */
+ assert(!prog->nparens);
+
+ /* s/// doesn't like it if $& is earlier than where we asked it to
+ * start searching (which can happen on something like /.\G/) */
+ if ( (flags & REXEC_FAIL_ON_UNDERFLOW)
+ && (s < stringarg))
+ {
+ /* this should only be possible under \G */
+ assert(prog->extflags & RXf_GPOS_SEEN);
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "matched, but failing for REXEC_FAIL_ON_UNDERFLOW\n"));
+ goto phooey;
+ }
+
+ /* match via INTUIT shouldn't have any captures.
+ * Let @-, @+, $^N know */
+ prog->lastparen = prog->lastcloseparen = 0;
+ RX_MATCH_UTF8_set(rx, utf8_target);
+ prog->offs[0].start = s - strbeg;
+ prog->offs[0].end = utf8_target
+ ? (char*)utf8_hop((U8*)s, prog->minlenret) - strbeg
+ : s - strbeg + prog->minlenret;
+ if ( !(flags & REXEC_NOT_FIRST) )
+ S_reg_set_capture_string(aTHX_ rx,
+ strbeg, strend,
+ sv, flags, utf8_target);
+
+ return 1;
+ }
+ }
+
+ multiline = prog->extflags & RXf_PMf_MULTILINE;
+
+ if (strend - s < (minlen+(prog->check_offset_min<0?prog->check_offset_min:0))) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "String too short [regexec_flags]...\n"));
+ goto phooey;
+ }
+
+ /* Check validity of program. */
+ if (UCHARAT(progi->program) != REG_MAGIC) {
+ Perl_croak(aTHX_ "corrupted regexp program");
+ }
+
+ RX_MATCH_TAINTED_off(rx);
+
+ reginfo->prog = rx; /* Yes, sorry that this is confusing. */
+ reginfo->intuit = 0;
+ reginfo->is_utf8_target = cBOOL(utf8_target);
+ reginfo->is_utf8_pat = cBOOL(RX_UTF8(rx));
+ reginfo->warned = FALSE;
+ reginfo->strbeg = strbeg;
+ reginfo->sv = sv;
+ reginfo->poscache_maxiter = 0; /* not yet started a countdown */
+ reginfo->strend = strend;
+ /* see how far we have to get to not match where we matched before */
+ reginfo->till = stringarg + minend;
+
+ if (prog->extflags & RXf_EVAL_SEEN && SvPADTMP(sv) && !IS_PADGV(sv)) {
+ /* SAVEFREESV, not sv_mortalcopy, as this SV must last until after
+ S_cleanup_regmatch_info_aux has executed (registered by
+ SAVEDESTRUCTOR_X below). S_cleanup_regmatch_info_aux modifies
+ magic belonging to this SV.
+ Not newSVsv, either, as it does not COW.
+ */
+ reginfo->sv = newSV(0);
+ sv_setsv(reginfo->sv, sv);
+ SAVEFREESV(reginfo->sv);
+ }
+
+ /* reserve next 2 or 3 slots in PL_regmatch_state:
+ * slot N+0: may currently be in use: skip it
+ * slot N+1: use for regmatch_info_aux struct
+ * slot N+2: use for regmatch_info_aux_eval struct if we have (?{})'s
+ * slot N+3: ready for use by regmatch()
+ */
+
+ {
+ regmatch_state *old_regmatch_state;
+ regmatch_slab *old_regmatch_slab;
+ int i, max = (prog->extflags & RXf_EVAL_SEEN) ? 2 : 1;
+
+ /* on first ever match, allocate first slab */
+ if (!PL_regmatch_slab) {
+ Newx(PL_regmatch_slab, 1, regmatch_slab);
+ PL_regmatch_slab->prev = NULL;
+ PL_regmatch_slab->next = NULL;
+ PL_regmatch_state = SLAB_FIRST(PL_regmatch_slab);
+ }
+
+ old_regmatch_state = PL_regmatch_state;
+ old_regmatch_slab = PL_regmatch_slab;
+
+ for (i=0; i <= max; i++) {
+ if (i == 1)
+ reginfo->info_aux = &(PL_regmatch_state->u.info_aux);
+ else if (i ==2)
+ reginfo->info_aux_eval =
+ reginfo->info_aux->info_aux_eval =
+ &(PL_regmatch_state->u.info_aux_eval);
+
+ if (++PL_regmatch_state > SLAB_LAST(PL_regmatch_slab))
+ PL_regmatch_state = S_push_slab(aTHX);
+ }
+
+ /* note initial PL_regmatch_state position; at end of match we'll
+ * pop back to there and free any higher slabs */
+
+ reginfo->info_aux->old_regmatch_state = old_regmatch_state;
+ reginfo->info_aux->old_regmatch_slab = old_regmatch_slab;
+ reginfo->info_aux->poscache = NULL;
+
+ SAVEDESTRUCTOR_X(S_cleanup_regmatch_info_aux, reginfo->info_aux);
+
+ if ((prog->extflags & RXf_EVAL_SEEN))
+ S_setup_eval_state(aTHX_ reginfo);
+ else
+ reginfo->info_aux_eval = reginfo->info_aux->info_aux_eval = NULL;
+ }
+
+ /* If there is a "must appear" string, look for it. */
+
+ if (PL_curpm && (PM_GETRE(PL_curpm) == rx)) {
+ /* We have to be careful. If the previous successful match
+ was from this regex we don't want a subsequent partially
+ successful match to clobber the old results.
+ So when we detect this possibility we add a swap buffer
+ to the re, and switch the buffer each match. If we fail,
+ we switch it back; otherwise we leave it swapped.
+ */
+ swap = prog->offs;
+ /* do we need a save destructor here for eval dies? */
+ Newxz(prog->offs, (prog->nparens + 1), regexp_paren_pair);
+ DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
+ "rex=0x%"UVxf" saving offs: orig=0x%"UVxf" new=0x%"UVxf"\n",
+ PTR2UV(prog),
+ PTR2UV(swap),
+ PTR2UV(prog->offs)
+ ));
+ }
+
+ /* Simplest case: anchored match need be tried only once. */
+ /* [unless only anchor is BOL and multiline is set] */
+ if (prog->extflags & (RXf_ANCH & ~RXf_ANCH_GPOS)) {
+ if (s == startpos && regtry(reginfo, &s))
+ goto got_it;
+ else if (multiline || (prog->intflags & PREGf_IMPLICIT)
+ || (prog->extflags & RXf_ANCH_MBOL)) /* XXXX SBOL? */
+ {
+ char *end;
+
+ if (minlen)
+ dontbother = minlen - 1;
+ end = HOP3c(strend, -dontbother, strbeg) - 1;
+ /* for multiline we only have to try after newlines */
+ if (prog->check_substr || prog->check_utf8) {
+ /* because of the goto we can not easily reuse the macros for bifurcating the
+ unicode/non-unicode match modes here like we do elsewhere - demerphq */
+ if (utf8_target) {
+ if (s == startpos)
+ goto after_try_utf8;
+ while (1) {
+ if (regtry(reginfo, &s)) {
+ goto got_it;
+ }
+ after_try_utf8:
+ if (s > end) {
+ goto phooey;
+ }
+ if (prog->extflags & RXf_USE_INTUIT) {
+ s = re_intuit_start(rx, sv, strbeg,
+ s + UTF8SKIP(s), strend, flags, NULL);
+ if (!s) {
+ goto phooey;
+ }
+ }
+ else {
+ s += UTF8SKIP(s);
+ }
+ }
+ } /* end search for check string in unicode */
+ else {
+ if (s == startpos) {
+ goto after_try_latin;
+ }
+ while (1) {
+ if (regtry(reginfo, &s)) {
+ goto got_it;
+ }
+ after_try_latin:
+ if (s > end) {
+ goto phooey;
+ }
+ if (prog->extflags & RXf_USE_INTUIT) {
+ s = re_intuit_start(rx, sv, strbeg,
+ s + 1, strend, flags, NULL);
+ if (!s) {
+ goto phooey;
+ }
+ }
+ else {
+ s++;
+ }
+ }
+ } /* end search for check string in latin*/
+ } /* end search for check string */
+ else { /* search for newline */
+ if (s > startpos) {
+ /*XXX: The s-- is almost definitely wrong here under unicode - demeprhq*/
+ s--;
+ }
+ /* We can use a more efficient search as newlines are the same in unicode as they are in latin */
+ while (s <= end) { /* note it could be possible to match at the end of the string */
+ if (*s++ == '\n') { /* don't need PL_utf8skip here */
+ if (regtry(reginfo, &s))
+ goto got_it;
+ }
+ }
+ } /* end search for newline */
+ } /* end anchored/multiline check string search */
+ goto phooey;
+ } else if (RXf_GPOS_CHECK == (prog->extflags & RXf_GPOS_CHECK))
+ {
+ /* For anchored \G, the only position it can match from is
+ * (ganch-gofs); we already set startpos to this above; if intuit
+ * moved us on from there, we can't possibly succeed */
+ assert(startpos == reginfo->ganch - prog->gofs);
+ if (s == startpos && regtry(reginfo, &s))
+ goto got_it;
+ goto phooey;
+ }
+
+ /* Messy cases: unanchored match. */
+ if ((prog->anchored_substr || prog->anchored_utf8) && prog->intflags & PREGf_SKIP) {
+ /* we have /x+whatever/ */
+ /* it must be a one character string (XXXX Except is_utf8_pat?) */
+ char ch;
+#ifdef DEBUGGING
+ int did_match = 0;
+#endif
+ if (utf8_target) {
+ if (! prog->anchored_utf8) {
+ to_utf8_substr(prog);
+ }
+ ch = SvPVX_const(prog->anchored_utf8)[0];
+ REXEC_FBC_SCAN(
+ if (*s == ch) {
+ DEBUG_EXECUTE_r( did_match = 1 );
+ if (regtry(reginfo, &s)) goto got_it;
+ s += UTF8SKIP(s);
+ while (s < strend && *s == ch)
+ s += UTF8SKIP(s);
+ }
+ );
+
+ }
+ else {
+ if (! prog->anchored_substr) {
+ if (! to_byte_substr(prog)) {
+ NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
+ }
+ }
+ ch = SvPVX_const(prog->anchored_substr)[0];
+ REXEC_FBC_SCAN(
+ if (*s == ch) {
+ DEBUG_EXECUTE_r( did_match = 1 );
+ if (regtry(reginfo, &s)) goto got_it;
+ s++;
+ while (s < strend && *s == ch)
+ s++;
+ }
+ );
+ }
+ DEBUG_EXECUTE_r(if (!did_match)
+ PerlIO_printf(Perl_debug_log,
+ "Did not find anchored character...\n")
+ );
+ }
+ else if (prog->anchored_substr != NULL
+ || prog->anchored_utf8 != NULL
+ || ((prog->float_substr != NULL || prog->float_utf8 != NULL)
+ && prog->float_max_offset < strend - s)) {
+ SV *must;
+ I32 back_max;
+ I32 back_min;
+ char *last;
+ char *last1; /* Last position checked before */
+#ifdef DEBUGGING
+ int did_match = 0;
+#endif
+ if (prog->anchored_substr || prog->anchored_utf8) {
+ if (utf8_target) {
+ if (! prog->anchored_utf8) {
+ to_utf8_substr(prog);
+ }
+ must = prog->anchored_utf8;
+ }
+ else {
+ if (! prog->anchored_substr) {
+ if (! to_byte_substr(prog)) {
+ NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
+ }
+ }
+ must = prog->anchored_substr;
+ }
+ back_max = back_min = prog->anchored_offset;
+ } else {
+ if (utf8_target) {
+ if (! prog->float_utf8) {
+ to_utf8_substr(prog);
+ }
+ must = prog->float_utf8;
+ }
+ else {
+ if (! prog->float_substr) {
+ if (! to_byte_substr(prog)) {
+ NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
+ }
+ }
+ must = prog->float_substr;
+ }
+ back_max = prog->float_max_offset;
+ back_min = prog->float_min_offset;
+ }
+
+ if (back_min<0) {
+ last = strend;
+ } else {
+ last = HOP3c(strend, /* Cannot start after this */
+ -(I32)(CHR_SVLEN(must)
+ - (SvTAIL(must) != 0) + back_min), strbeg);
+ }
+ if (s > reginfo->strbeg)
+ last1 = HOPc(s, -1);
+ else
+ last1 = s - 1; /* bogus */
+
+ /* XXXX check_substr already used to find "s", can optimize if
+ check_substr==must. */
+ dontbother = end_shift;
+ strend = HOPc(strend, -dontbother);
+ while ( (s <= last) &&
+ (s = fbm_instr((unsigned char*)HOP3(s, back_min, (back_min<0 ? strbeg : strend)),
+ (unsigned char*)strend, must,
+ multiline ? FBMrf_MULTILINE : 0)) ) {
+ DEBUG_EXECUTE_r( did_match = 1 );
+ if (HOPc(s, -back_max) > last1) {
+ last1 = HOPc(s, -back_min);
+ s = HOPc(s, -back_max);
+ }
+ else {
+ char * const t = (last1 >= reginfo->strbeg)
+ ? HOPc(last1, 1) : last1 + 1;
+
+ last1 = HOPc(s, -back_min);
+ s = t;
+ }
+ if (utf8_target) {
+ while (s <= last1) {
+ if (regtry(reginfo, &s))
+ goto got_it;
+ if (s >= last1) {
+ s++; /* to break out of outer loop */
+ break;
+ }
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (s <= last1) {
+ if (regtry(reginfo, &s))
+ goto got_it;
+ s++;
+ }
+ }
+ }
+ DEBUG_EXECUTE_r(if (!did_match) {
+ RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
+ SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
+ PerlIO_printf(Perl_debug_log, "Did not find %s substr %s%s...\n",
+ ((must == prog->anchored_substr || must == prog->anchored_utf8)
+ ? "anchored" : "floating"),
+ quoted, RE_SV_TAIL(must));
+ });
+ goto phooey;
+ }
+ else if ( (c = progi->regstclass) ) {
+ if (minlen) {
+ const OPCODE op = OP(progi->regstclass);
+ /* don't bother with what can't match */
+ if (PL_regkind[op] != EXACT && op != CANY && PL_regkind[op] != TRIE)
+ strend = HOPc(strend, -(minlen - 1));
+ }
+ DEBUG_EXECUTE_r({
+ SV * const prop = sv_newmortal();
+ regprop(prog, prop, c);
+ {
+ RE_PV_QUOTED_DECL(quoted,utf8_target,PERL_DEBUG_PAD_ZERO(1),
+ s,strend-s,60);
+ PerlIO_printf(Perl_debug_log,
+ "Matching stclass %.*s against %s (%d bytes)\n",
+ (int)SvCUR(prop), SvPVX_const(prop),
+ quoted, (int)(strend - s));
+ }
+ });
+ if (find_byclass(prog, c, s, strend, reginfo))
+ goto got_it;
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "Contradicts stclass... [regexec_flags]\n"));
+ }
+ else {
+ dontbother = 0;
+ if (prog->float_substr != NULL || prog->float_utf8 != NULL) {
+ /* Trim the end. */
+ char *last= NULL;
+ SV* float_real;
+ STRLEN len;
+ const char *little;
+
+ if (utf8_target) {
+ if (! prog->float_utf8) {
+ to_utf8_substr(prog);
+ }
+ float_real = prog->float_utf8;
+ }
+ else {
+ if (! prog->float_substr) {
+ if (! to_byte_substr(prog)) {
+ NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
+ }
+ }
+ float_real = prog->float_substr;
+ }
+
+ little = SvPV_const(float_real, len);
+ if (SvTAIL(float_real)) {
+ /* This means that float_real contains an artificial \n on
+ * the end due to the presence of something like this:
+ * /foo$/ where we can match both "foo" and "foo\n" at the
+ * end of the string. So we have to compare the end of the
+ * string first against the float_real without the \n and
+ * then against the full float_real with the string. We
+ * have to watch out for cases where the string might be
+ * smaller than the float_real or the float_real without
+ * the \n. */
+ char *checkpos= strend - len;
+ DEBUG_OPTIMISE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sChecking for float_real.%s\n",
+ PL_colors[4], PL_colors[5]));
+ if (checkpos + 1 < strbeg) {
+ /* can't match, even if we remove the trailing \n
+ * string is too short to match */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sString shorter than required trailing substring, cannot match.%s\n",
+ PL_colors[4], PL_colors[5]));
+ goto phooey;
+ } else if (memEQ(checkpos + 1, little, len - 1)) {
+ /* can match, the end of the string matches without the
+ * "\n" */
+ last = checkpos + 1;
+ } else if (checkpos < strbeg) {
+ /* cant match, string is too short when the "\n" is
+ * included */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sString does not contain required trailing substring, cannot match.%s\n",
+ PL_colors[4], PL_colors[5]));
+ goto phooey;
+ } else if (!multiline) {
+ /* non multiline match, so compare with the "\n" at the
+ * end of the string */
+ if (memEQ(checkpos, little, len)) {
+ last= checkpos;
+ } else {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%sString does not contain required trailing substring, cannot match.%s\n",
+ PL_colors[4], PL_colors[5]));
+ goto phooey;
+ }
+ } else {
+ /* multiline match, so we have to search for a place
+ * where the full string is located */
+ goto find_last;
+ }
+ } else {
+ find_last:
+ if (len)
+ last = rninstr(s, strend, little, little + len);
+ else
+ last = strend; /* matching "$" */
+ }
+ if (!last) {
+ /* at one point this block contained a comment which was
+ * probably incorrect, which said that this was a "should not
+ * happen" case. Even if it was true when it was written I am
+ * pretty sure it is not anymore, so I have removed the comment
+ * and replaced it with this one. Yves */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "String does not contain required substring, cannot match.\n"
+ ));
+ goto phooey;
+ }
+ dontbother = strend - last + prog->float_min_offset;
+ }
+ if (minlen && (dontbother < minlen))
+ dontbother = minlen - 1;
+ strend -= dontbother; /* this one's always in bytes! */
+ /* We don't know much -- general case. */
+ if (utf8_target) {
+ for (;;) {
+ if (regtry(reginfo, &s))
+ goto got_it;
+ if (s >= strend)
+ break;
+ s += UTF8SKIP(s);
+ };
+ }
+ else {
+ do {
+ if (regtry(reginfo, &s))
+ goto got_it;
+ } while (s++ < strend);
+ }
+ }
+
+ /* Failure. */
+ goto phooey;
+
+got_it:
+ /* s/// doesn't like it if $& is earlier than where we asked it to
+ * start searching (which can happen on something like /.\G/) */
+ if ( (flags & REXEC_FAIL_ON_UNDERFLOW)
+ && (prog->offs[0].start < stringarg - strbeg))
+ {
+ /* this should only be possible under \G */
+ assert(prog->extflags & RXf_GPOS_SEEN);
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "matched, but failing for REXEC_FAIL_ON_UNDERFLOW\n"));
+ goto phooey;
+ }
+
+ DEBUG_BUFFERS_r(
+ if (swap)
+ PerlIO_printf(Perl_debug_log,
+ "rex=0x%"UVxf" freeing offs: 0x%"UVxf"\n",
+ PTR2UV(prog),
+ PTR2UV(swap)
+ );
+ );
+ Safefree(swap);
+
+ /* clean up; this will trigger destructors that will free all slabs
+ * above the current one, and cleanup the regmatch_info_aux
+ * and regmatch_info_aux_eval sructs */
+
+ LEAVE_SCOPE(oldsave);
+
+ if (RXp_PAREN_NAMES(prog))
+ (void)hv_iterinit(RXp_PAREN_NAMES(prog));
+
+ RX_MATCH_UTF8_set(rx, utf8_target);
+
+ /* make sure $`, $&, $', and $digit will work later */
+ if ( !(flags & REXEC_NOT_FIRST) )
+ S_reg_set_capture_string(aTHX_ rx,
+ strbeg, reginfo->strend,
+ sv, flags, utf8_target);
+
+ return 1;
+
+phooey:
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch failed%s\n",
+ PL_colors[4], PL_colors[5]));
+
+ /* clean up; this will trigger destructors that will free all slabs
+ * above the current one, and cleanup the regmatch_info_aux
+ * and regmatch_info_aux_eval sructs */
+
+ LEAVE_SCOPE(oldsave);
+
+ if (swap) {
+ /* we failed :-( roll it back */
+ DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
+ "rex=0x%"UVxf" rolling back offs: freeing=0x%"UVxf" restoring=0x%"UVxf"\n",
+ PTR2UV(prog),
+ PTR2UV(prog->offs),
+ PTR2UV(swap)
+ ));
+ Safefree(prog->offs);
+ prog->offs = swap;
+ }
+ return 0;
+}
+
+
+/* Set which rex is pointed to by PL_reg_curpm, handling ref counting.
+ * Do inc before dec, in case old and new rex are the same */
+#define SET_reg_curpm(Re2) \
+ if (reginfo->info_aux_eval) { \
+ (void)ReREFCNT_inc(Re2); \
+ ReREFCNT_dec(PM_GETRE(PL_reg_curpm)); \
+ PM_SETRE((PL_reg_curpm), (Re2)); \
+ }
+
+
+/*
+ - regtry - try match at specific point
+ */
+STATIC I32 /* 0 failure, 1 success */
+S_regtry(pTHX_ regmatch_info *reginfo, char **startposp)
+{
+ dVAR;
+ CHECKPOINT lastcp;
+ REGEXP *const rx = reginfo->prog;
+ regexp *const prog = ReANY(rx);
+ I32 result;
+ RXi_GET_DECL(prog,progi);
+ GET_RE_DEBUG_FLAGS_DECL;
+
+ PERL_ARGS_ASSERT_REGTRY;
+
+ reginfo->cutpoint=NULL;
+
+ prog->offs[0].start = *startposp - reginfo->strbeg;
+ prog->lastparen = 0;
+ prog->lastcloseparen = 0;
+
+ /* XXXX What this code is doing here?!!! There should be no need
+ to do this again and again, prog->lastparen should take care of
+ this! --ilya*/
+
+ /* Tests pat.t#187 and split.t#{13,14} seem to depend on this code.
+ * Actually, the code in regcppop() (which Ilya may be meaning by
+ * prog->lastparen), is not needed at all by the test suite
+ * (op/regexp, op/pat, op/split), but that code is needed otherwise
+ * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
+ * Meanwhile, this code *is* needed for the
+ * above-mentioned test suite tests to succeed. The common theme
+ * on those tests seems to be returning null fields from matches.
+ * --jhi updated by dapm */
+#if 1
+ if (prog->nparens) {
+ regexp_paren_pair *pp = prog->offs;
+ I32 i;
+ for (i = prog->nparens; i > (I32)prog->lastparen; i--) {
+ ++pp;
+ pp->start = -1;
+ pp->end = -1;
+ }
+ }
+#endif
+ REGCP_SET(lastcp);
+ result = regmatch(reginfo, *startposp, progi->program + 1);
+ if (result != -1) {
+ prog->offs[0].end = result;
+ return 1;
+ }
+ if (reginfo->cutpoint)
+ *startposp= reginfo->cutpoint;
+ REGCP_UNWIND(lastcp);
+ return 0;
+}
+
+
+#define sayYES goto yes
+#define sayNO goto no
+#define sayNO_SILENT goto no_silent
+
+/* we dont use STMT_START/END here because it leads to
+ "unreachable code" warnings, which are bogus, but distracting. */
+#define CACHEsayNO \
+ if (ST.cache_mask) \
+ reginfo->info_aux->poscache[ST.cache_offset] |= ST.cache_mask; \
+ sayNO
+
+/* this is used to determine how far from the left messages like
+ 'failed...' are printed. It should be set such that messages
+ are inline with the regop output that created them.
+*/
+#define REPORT_CODE_OFF 32
+
+
+#define CHRTEST_UNINIT -1001 /* c1/c2 haven't been calculated yet */
+#define CHRTEST_VOID -1000 /* the c1/c2 "next char" test should be skipped */
+#define CHRTEST_NOT_A_CP_1 -999
+#define CHRTEST_NOT_A_CP_2 -998
+
+/* grab a new slab and return the first slot in it */
+
+STATIC regmatch_state *
+S_push_slab(pTHX)
+{
+#if PERL_VERSION < 9 && !defined(PERL_CORE)
+ dMY_CXT;
+#endif
+ regmatch_slab *s = PL_regmatch_slab->next;
+ if (!s) {
+ Newx(s, 1, regmatch_slab);
+ s->prev = PL_regmatch_slab;
+ s->next = NULL;
+ PL_regmatch_slab->next = s;
+ }
+ PL_regmatch_slab = s;
+ return SLAB_FIRST(s);
+}
+
+
+/* push a new state then goto it */
+
+#define PUSH_STATE_GOTO(state, node, input) \
+ pushinput = input; \
+ scan = node; \
+ st->resume_state = state; \
+ goto push_state;
+
+/* push a new state with success backtracking, then goto it */
+
+#define PUSH_YES_STATE_GOTO(state, node, input) \
+ pushinput = input; \
+ scan = node; \
+ st->resume_state = state; \
+ goto push_yes_state;
+
+
+
+
+/*
+
+regmatch() - main matching routine
+
+This is basically one big switch statement in a loop. We execute an op,
+set 'next' to point the next op, and continue. If we come to a point which
+we may need to backtrack to on failure such as (A|B|C), we push a
+backtrack state onto the backtrack stack. On failure, we pop the top
+state, and re-enter the loop at the state indicated. If there are no more
+states to pop, we return failure.
+
+Sometimes we also need to backtrack on success; for example /A+/, where
+after successfully matching one A, we need to go back and try to
+match another one; similarly for lookahead assertions: if the assertion
+completes successfully, we backtrack to the state just before the assertion
+and then carry on. In these cases, the pushed state is marked as
+'backtrack on success too'. This marking is in fact done by a chain of
+pointers, each pointing to the previous 'yes' state. On success, we pop to
+the nearest yes state, discarding any intermediate failure-only states.
+Sometimes a yes state is pushed just to force some cleanup code to be
+called at the end of a successful match or submatch; e.g. (??{$re}) uses
+it to free the inner regex.
+
+Note that failure backtracking rewinds the cursor position, while
+success backtracking leaves it alone.
+
+A pattern is complete when the END op is executed, while a subpattern
+such as (?=foo) is complete when the SUCCESS op is executed. Both of these
+ops trigger the "pop to last yes state if any, otherwise return true"
+behaviour.
+
+A common convention in this function is to use A and B to refer to the two
+subpatterns (or to the first nodes thereof) in patterns like /A*B/: so A is
+the subpattern to be matched possibly multiple times, while B is the entire
+rest of the pattern. Variable and state names reflect this convention.
+
+The states in the main switch are the union of ops and failure/success of
+substates associated with with that op. For example, IFMATCH is the op
+that does lookahead assertions /(?=A)B/ and so the IFMATCH state means
+'execute IFMATCH'; while IFMATCH_A is a state saying that we have just
+successfully matched A and IFMATCH_A_fail is a state saying that we have
+just failed to match A. Resume states always come in pairs. The backtrack
+state we push is marked as 'IFMATCH_A', but when that is popped, we resume
+at IFMATCH_A or IFMATCH_A_fail, depending on whether we are backtracking
+on success or failure.
+
+The struct that holds a backtracking state is actually a big union, with
+one variant for each major type of op. The variable st points to the
+top-most backtrack struct. To make the code clearer, within each
+block of code we #define ST to alias the relevant union.
+
+Here's a concrete example of a (vastly oversimplified) IFMATCH
+implementation:
+
+ switch (state) {
+ ....
+
+#define ST st->u.ifmatch
+
+ case IFMATCH: // we are executing the IFMATCH op, (?=A)B
+ ST.foo = ...; // some state we wish to save
+ ...
+ // push a yes backtrack state with a resume value of
+ // IFMATCH_A/IFMATCH_A_fail, then continue execution at the
+ // first node of A:
+ PUSH_YES_STATE_GOTO(IFMATCH_A, A, newinput);
+ // NOTREACHED
+
+ case IFMATCH_A: // we have successfully executed A; now continue with B
+ next = B;
+ bar = ST.foo; // do something with the preserved value
+ break;
+
+ case IFMATCH_A_fail: // A failed, so the assertion failed
+ ...; // do some housekeeping, then ...
+ sayNO; // propagate the failure
+
+#undef ST
+
+ ...
+ }
+
+For any old-timers reading this who are familiar with the old recursive
+approach, the code above is equivalent to:
+
+ case IFMATCH: // we are executing the IFMATCH op, (?=A)B
+ {
+ int foo = ...
+ ...
+ if (regmatch(A)) {
+ next = B;
+ bar = foo;
+ break;
+ }
+ ...; // do some housekeeping, then ...
+ sayNO; // propagate the failure
+ }
+
+The topmost backtrack state, pointed to by st, is usually free. If you
+want to claim it, populate any ST.foo fields in it with values you wish to
+save, then do one of
+
+ PUSH_STATE_GOTO(resume_state, node, newinput);
+ PUSH_YES_STATE_GOTO(resume_state, node, newinput);
+
+which sets that backtrack state's resume value to 'resume_state', pushes a
+new free entry to the top of the backtrack stack, then goes to 'node'.
+On backtracking, the free slot is popped, and the saved state becomes the
+new free state. An ST.foo field in this new top state can be temporarily
+accessed to retrieve values, but once the main loop is re-entered, it
+becomes available for reuse.
+
+Note that the depth of the backtrack stack constantly increases during the
+left-to-right execution of the pattern, rather than going up and down with
+the pattern nesting. For example the stack is at its maximum at Z at the
+end of the pattern, rather than at X in the following:
+
+ /(((X)+)+)+....(Y)+....Z/
+
+The only exceptions to this are lookahead/behind assertions and the cut,
+(?>A), which pop all the backtrack states associated with A before
+continuing.
+
+Backtrack state structs are allocated in slabs of about 4K in size.
+PL_regmatch_state and st always point to the currently active state,
+and PL_regmatch_slab points to the slab currently containing
+PL_regmatch_state. The first time regmatch() is called, the first slab is
+allocated, and is never freed until interpreter destruction. When the slab
+is full, a new one is allocated and chained to the end. At exit from
+regmatch(), slabs allocated since entry are freed.
+
+*/
+
+
+#define DEBUG_STATE_pp(pp) \
+ DEBUG_STATE_r({ \
+ DUMP_EXEC_POS(locinput, scan, utf8_target); \
+ PerlIO_printf(Perl_debug_log, \
+ " %*s"pp" %s%s%s%s%s\n", \
+ depth*2, "", \
+ PL_reg_name[st->resume_state], \
+ ((st==yes_state||st==mark_state) ? "[" : ""), \
+ ((st==yes_state) ? "Y" : ""), \
+ ((st==mark_state) ? "M" : ""), \
+ ((st==yes_state||st==mark_state) ? "]" : "") \
+ ); \
+ });
+
+
+#define REG_NODE_NUM(x) ((x) ? (int)((x)-prog) : -1)
+
+#ifdef DEBUGGING
+
+STATIC void
+S_debug_start_match(pTHX_ const REGEXP *prog, const bool utf8_target,
+ const char *start, const char *end, const char *blurb)
+{
+ const bool utf8_pat = RX_UTF8(prog) ? 1 : 0;
+
+ PERL_ARGS_ASSERT_DEBUG_START_MATCH;
+
+ if (!PL_colorset)
+ reginitcolors();
+ {
+ RE_PV_QUOTED_DECL(s0, utf8_pat, PERL_DEBUG_PAD_ZERO(0),
+ RX_PRECOMP_const(prog), RX_PRELEN(prog), 60);
+
+ RE_PV_QUOTED_DECL(s1, utf8_target, PERL_DEBUG_PAD_ZERO(1),
+ start, end - start, 60);
+
+ PerlIO_printf(Perl_debug_log,
+ "%s%s REx%s %s against %s\n",
+ PL_colors[4], blurb, PL_colors[5], s0, s1);
+
+ if (utf8_target||utf8_pat)
+ PerlIO_printf(Perl_debug_log, "UTF-8 %s%s%s...\n",
+ utf8_pat ? "pattern" : "",
+ utf8_pat && utf8_target ? " and " : "",
+ utf8_target ? "string" : ""
+ );
+ }
+}
+
+STATIC void
+S_dump_exec_pos(pTHX_ const char *locinput,
+ const regnode *scan,
+ const char *loc_regeol,
+ const char *loc_bostr,
+ const char *loc_reg_starttry,
+ const bool utf8_target)
+{
+ const int docolor = *PL_colors[0] || *PL_colors[2] || *PL_colors[4];
+ const int taill = (docolor ? 10 : 7); /* 3 chars for "> <" */
+ int l = (loc_regeol - locinput) > taill ? taill : (loc_regeol - locinput);
+ /* The part of the string before starttry has one color
+ (pref0_len chars), between starttry and current
+ position another one (pref_len - pref0_len chars),
+ after the current position the third one.
+ We assume that pref0_len <= pref_len, otherwise we
+ decrease pref0_len. */
+ int pref_len = (locinput - loc_bostr) > (5 + taill) - l
+ ? (5 + taill) - l : locinput - loc_bostr;
+ int pref0_len;
+
+ PERL_ARGS_ASSERT_DUMP_EXEC_POS;
+
+ while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput - pref_len)))
+ pref_len++;
+ pref0_len = pref_len - (locinput - loc_reg_starttry);
+ if (l + pref_len < (5 + taill) && l < loc_regeol - locinput)
+ l = ( loc_regeol - locinput > (5 + taill) - pref_len
+ ? (5 + taill) - pref_len : loc_regeol - locinput);
+ while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput + l)))
+ l--;
+ if (pref0_len < 0)
+ pref0_len = 0;
+ if (pref0_len > pref_len)
+ pref0_len = pref_len;
+ {
+ const int is_uni = (utf8_target && OP(scan) != CANY) ? 1 : 0;
+
+ RE_PV_COLOR_DECL(s0,len0,is_uni,PERL_DEBUG_PAD(0),
+ (locinput - pref_len),pref0_len, 60, 4, 5);
+
+ RE_PV_COLOR_DECL(s1,len1,is_uni,PERL_DEBUG_PAD(1),
+ (locinput - pref_len + pref0_len),
+ pref_len - pref0_len, 60, 2, 3);
+
+ RE_PV_COLOR_DECL(s2,len2,is_uni,PERL_DEBUG_PAD(2),
+ locinput, loc_regeol - locinput, 10, 0, 1);
+
+ const STRLEN tlen=len0+len1+len2;
+ PerlIO_printf(Perl_debug_log,
+ "%4"IVdf" <%.*s%.*s%s%.*s>%*s|",
+ (IV)(locinput - loc_bostr),
+ len0, s0,
+ len1, s1,
+ (docolor ? "" : "> <"),
+ len2, s2,
+ (int)(tlen > 19 ? 0 : 19 - tlen),
+ "");
+ }
+}
+
+#endif
+
+/* reg_check_named_buff_matched()
+ * Checks to see if a named buffer has matched. The data array of
+ * buffer numbers corresponding to the buffer is expected to reside
+ * in the regexp->data->data array in the slot stored in the ARG() of
+ * node involved. Note that this routine doesn't actually care about the
+ * name, that information is not preserved from compilation to execution.
+ * Returns the index of the leftmost defined buffer with the given name
+ * or 0 if non of the buffers matched.
+ */
+STATIC I32
+S_reg_check_named_buff_matched(pTHX_ const regexp *rex, const regnode *scan)
+{
+ I32 n;
+ RXi_GET_DECL(rex,rexi);
+ SV *sv_dat= MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ I32 *nums=(I32*)SvPVX(sv_dat);
+
+ PERL_ARGS_ASSERT_REG_CHECK_NAMED_BUFF_MATCHED;
+
+ for ( n=0; n<SvIVX(sv_dat); n++ ) {
+ if ((I32)rex->lastparen >= nums[n] &&
+ rex->offs[nums[n]].end != -1)
+ {
+ return nums[n];
+ }
+ }
+ return 0;
+}
+
+
+static bool
+S_setup_EXACTISH_ST_c1_c2(pTHX_ const regnode * const text_node, int *c1p,
+ U8* c1_utf8, int *c2p, U8* c2_utf8, regmatch_info *reginfo)
+{
+ /* This function determines if there are one or two characters that match
+ * the first character of the passed-in EXACTish node <text_node>, and if
+ * so, returns them in the passed-in pointers.
+ *
+ * If it determines that no possible character in the target string can
+ * match, it returns FALSE; otherwise TRUE. (The FALSE situation occurs if
+ * the first character in <text_node> requires UTF-8 to represent, and the
+ * target string isn't in UTF-8.)
+ *
+ * If there are more than two characters that could match the beginning of
+ * <text_node>, or if more context is required to determine a match or not,
+ * it sets both *<c1p> and *<c2p> to CHRTEST_VOID.
+ *
+ * The motiviation behind this function is to allow the caller to set up
+ * tight loops for matching. If <text_node> is of type EXACT, there is
+ * only one possible character that can match its first character, and so
+ * the situation is quite simple. But things get much more complicated if
+ * folding is involved. It may be that the first character of an EXACTFish
+ * node doesn't participate in any possible fold, e.g., punctuation, so it
+ * can be matched only by itself. The vast majority of characters that are
+ * in folds match just two things, their lower and upper-case equivalents.
+ * But not all are like that; some have multiple possible matches, or match
+ * sequences of more than one character. This function sorts all that out.
+ *
+ * Consider the patterns A*B or A*?B where A and B are arbitrary. In a
+ * loop of trying to match A*, we know we can't exit where the thing
+ * following it isn't a B. And something can't be a B unless it is the
+ * beginning of B. By putting a quick test for that beginning in a tight
+ * loop, we can rule out things that can't possibly be B without having to
+ * break out of the loop, thus avoiding work. Similarly, if A is a single
+ * character, we can make a tight loop matching A*, using the outputs of
+ * this function.
+ *
+ * If the target string to match isn't in UTF-8, and there aren't
+ * complications which require CHRTEST_VOID, *<c1p> and *<c2p> are set to
+ * the one or two possible octets (which are characters in this situation)
+ * that can match. In all cases, if there is only one character that can
+ * match, *<c1p> and *<c2p> will be identical.
+ *
+ * If the target string is in UTF-8, the buffers pointed to by <c1_utf8>
+ * and <c2_utf8> will contain the one or two UTF-8 sequences of bytes that
+ * can match the beginning of <text_node>. They should be declared with at
+ * least length UTF8_MAXBYTES+1. (If the target string isn't in UTF-8, it is
+ * undefined what these contain.) If one or both of the buffers are
+ * invariant under UTF-8, *<c1p>, and *<c2p> will also be set to the
+ * corresponding invariant. If variant, the corresponding *<c1p> and/or
+ * *<c2p> will be set to a negative number(s) that shouldn't match any code
+ * point (unless inappropriately coerced to unsigned). *<c1p> will equal
+ * *<c2p> if and only if <c1_utf8> and <c2_utf8> are the same. */
+
+ const bool utf8_target = reginfo->is_utf8_target;
+
+ UV c1 = CHRTEST_NOT_A_CP_1;
+ UV c2 = CHRTEST_NOT_A_CP_2;
+ bool use_chrtest_void = FALSE;
+ const bool is_utf8_pat = reginfo->is_utf8_pat;
+
+ /* Used when we have both utf8 input and utf8 output, to avoid converting
+ * to/from code points */
+ bool utf8_has_been_setup = FALSE;
+
+ dVAR;
+
+ U8 *pat = (U8*)STRING(text_node);
+
+ if (OP(text_node) == EXACT) {
+
+ /* In an exact node, only one thing can be matched, that first
+ * character. If both the pat and the target are UTF-8, we can just
+ * copy the input to the output, avoiding finding the code point of
+ * that character */
+ if (!is_utf8_pat) {
+ c2 = c1 = *pat;
+ }
+ else if (utf8_target) {
+ Copy(pat, c1_utf8, UTF8SKIP(pat), U8);
+ Copy(pat, c2_utf8, UTF8SKIP(pat), U8);
+ utf8_has_been_setup = TRUE;
+ }
+ else {
+ c2 = c1 = valid_utf8_to_uvchr(pat, NULL);
+ }
+ }
+ else /* an EXACTFish node */
+ if ((is_utf8_pat
+ && is_MULTI_CHAR_FOLD_utf8_safe(pat,
+ pat + STR_LEN(text_node)))
+ || (!is_utf8_pat
+ && is_MULTI_CHAR_FOLD_latin1_safe(pat,
+ pat + STR_LEN(text_node))))
+ {
+ /* Multi-character folds require more context to sort out. Also
+ * PL_utf8_foldclosures used below doesn't handle them, so have to be
+ * handled outside this routine */
+ use_chrtest_void = TRUE;
+ }
+ else { /* an EXACTFish node which doesn't begin with a multi-char fold */
+ c1 = is_utf8_pat ? valid_utf8_to_uvchr(pat, NULL) : *pat;
+ if (c1 > 256) {
+ /* Load the folds hash, if not already done */
+ SV** listp;
+ if (! PL_utf8_foldclosures) {
+ if (! PL_utf8_tofold) {
+ U8 dummy[UTF8_MAXBYTES+1];
+
+ /* Force loading this by folding an above-Latin1 char */
+ to_utf8_fold((U8*) HYPHEN_UTF8, dummy, NULL);
+ assert(PL_utf8_tofold); /* Verify that worked */
+ }
+ PL_utf8_foldclosures = _swash_inversion_hash(PL_utf8_tofold);
+ }
+
+ /* The fold closures data structure is a hash with the keys being
+ * the UTF-8 of every character that is folded to, like 'k', and
+ * the values each an array of all code points that fold to its
+ * key. e.g. [ 'k', 'K', KELVIN_SIGN ]. Multi-character folds are
+ * not included */
+ if ((! (listp = hv_fetch(PL_utf8_foldclosures,
+ (char *) pat,
+ UTF8SKIP(pat),
+ FALSE))))
+ {
+ /* Not found in the hash, therefore there are no folds
+ * containing it, so there is only a single character that
+ * could match */
+ c2 = c1;
+ }
+ else { /* Does participate in folds */
+ AV* list = (AV*) *listp;
+ if (av_len(list) != 1) {
+
+ /* If there aren't exactly two folds to this, it is outside
+ * the scope of this function */
+ use_chrtest_void = TRUE;
+ }
+ else { /* There are two. Get them */
+ SV** c_p = av_fetch(list, 0, FALSE);
+ if (c_p == NULL) {
+ Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
+ }
+ c1 = SvUV(*c_p);
+
+ c_p = av_fetch(list, 1, FALSE);
+ if (c_p == NULL) {
+ Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
+ }
+ c2 = SvUV(*c_p);
+
+ /* Folds that cross the 255/256 boundary are forbidden if
+ * EXACTFL, or EXACTFA and one is ASCIII. Since the
+ * pattern character is above 256, and its only other match
+ * is below 256, the only legal match will be to itself.
+ * We have thrown away the original, so have to compute
+ * which is the one above 255 */
+ if ((c1 < 256) != (c2 < 256)) {
+ if (OP(text_node) == EXACTFL
+ || (OP(text_node) == EXACTFA
+ && (isASCII(c1) || isASCII(c2))))
+ {
+ if (c1 < 256) {
+ c1 = c2;
+ }
+ else {
+ c2 = c1;
+ }
+ }
+ }
+ }
+ }
+ }
+ else /* Here, c1 is < 255 */
+ if (utf8_target
+ && HAS_NONLATIN1_FOLD_CLOSURE(c1)
+ && OP(text_node) != EXACTFL
+ && (OP(text_node) != EXACTFA || ! isASCII(c1)))
+ {
+ /* Here, there could be something above Latin1 in the target which
+ * folds to this character in the pattern. All such cases except
+ * LATIN SMALL LETTER Y WITH DIAERESIS have more than two characters
+ * involved in their folds, so are outside the scope of this
+ * function */
+ if (UNLIKELY(c1 == LATIN_SMALL_LETTER_Y_WITH_DIAERESIS)) {
+ c2 = LATIN_CAPITAL_LETTER_Y_WITH_DIAERESIS;
+ }
+ else {
+ use_chrtest_void = TRUE;
+ }
+ }
+ else { /* Here nothing above Latin1 can fold to the pattern character */
+ switch (OP(text_node)) {
+
+ case EXACTFL: /* /l rules */
+ c2 = PL_fold_locale[c1];
+ break;
+
+ case EXACTF:
+ if (! utf8_target) { /* /d rules */
+ c2 = PL_fold[c1];
+ break;
+ }
+ /* FALLTHROUGH */
+ /* /u rules for all these. This happens to work for
+ * EXACTFA as nothing in Latin1 folds to ASCII */
+ case EXACTFA:
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU_SS:
+ case EXACTFU:
+ c2 = PL_fold_latin1[c1];
+ break;
+
+ default:
+ Perl_croak(aTHX_ "panic: Unexpected op %u", OP(text_node));
+ assert(0); /* NOTREACHED */
+ }
+ }
+ }
+
+ /* Here have figured things out. Set up the returns */
+ if (use_chrtest_void) {
+ *c2p = *c1p = CHRTEST_VOID;
+ }
+ else if (utf8_target) {
+ if (! utf8_has_been_setup) { /* Don't have the utf8; must get it */
+ uvchr_to_utf8(c1_utf8, c1);
+ uvchr_to_utf8(c2_utf8, c2);
+ }
+
+ /* Invariants are stored in both the utf8 and byte outputs; Use
+ * negative numbers otherwise for the byte ones. Make sure that the
+ * byte ones are the same iff the utf8 ones are the same */
+ *c1p = (UTF8_IS_INVARIANT(*c1_utf8)) ? *c1_utf8 : CHRTEST_NOT_A_CP_1;
+ *c2p = (UTF8_IS_INVARIANT(*c2_utf8))
+ ? *c2_utf8
+ : (c1 == c2)
+ ? CHRTEST_NOT_A_CP_1
+ : CHRTEST_NOT_A_CP_2;
+ }
+ else if (c1 > 255) {
+ if (c2 > 255) { /* both possibilities are above what a non-utf8 string
+ can represent */
+ return FALSE;
+ }
+
+ *c1p = *c2p = c2; /* c2 is the only representable value */
+ }
+ else { /* c1 is representable; see about c2 */
+ *c1p = c1;
+ *c2p = (c2 < 256) ? c2 : c1;
+ }
+
+ return TRUE;
+}
+
+/* returns -1 on failure, $+[0] on success */
+STATIC I32
+S_regmatch(pTHX_ regmatch_info *reginfo, char *startpos, regnode *prog)
+{
+#if PERL_VERSION < 9 && !defined(PERL_CORE)
+ dMY_CXT;
+#endif
+ dVAR;
+ const bool utf8_target = reginfo->is_utf8_target;
+ const U32 uniflags = UTF8_ALLOW_DEFAULT;
+ REGEXP *rex_sv = reginfo->prog;
+ regexp *rex = ReANY(rex_sv);
+ RXi_GET_DECL(rex,rexi);
+ /* the current state. This is a cached copy of PL_regmatch_state */
+ regmatch_state *st;
+ /* cache heavy used fields of st in registers */
+ regnode *scan;
+ regnode *next;
+ U32 n = 0; /* general value; init to avoid compiler warning */
+ I32 ln = 0; /* len or last; init to avoid compiler warning */
+ char *locinput = startpos;
+ char *pushinput; /* where to continue after a PUSH */
+ I32 nextchr; /* is always set to UCHARAT(locinput) */
+
+ bool result = 0; /* return value of S_regmatch */
+ int depth = 0; /* depth of backtrack stack */
+ U32 nochange_depth = 0; /* depth of GOSUB recursion with nochange */
+ const U32 max_nochange_depth =
+ (3 * rex->nparens > MAX_RECURSE_EVAL_NOCHANGE_DEPTH) ?
+ 3 * rex->nparens : MAX_RECURSE_EVAL_NOCHANGE_DEPTH;
+ regmatch_state *yes_state = NULL; /* state to pop to on success of
+ subpattern */
+ /* mark_state piggy backs on the yes_state logic so that when we unwind
+ the stack on success we can update the mark_state as we go */
+ regmatch_state *mark_state = NULL; /* last mark state we have seen */
+ regmatch_state *cur_eval = NULL; /* most recent EVAL_AB state */
+ struct regmatch_state *cur_curlyx = NULL; /* most recent curlyx */
+ U32 state_num;
+ bool no_final = 0; /* prevent failure from backtracking? */
+ bool do_cutgroup = 0; /* no_final only until next branch/trie entry */
+ char *startpoint = locinput;
+ SV *popmark = NULL; /* are we looking for a mark? */
+ SV *sv_commit = NULL; /* last mark name seen in failure */
+ SV *sv_yes_mark = NULL; /* last mark name we have seen
+ during a successful match */
+ U32 lastopen = 0; /* last open we saw */
+ bool has_cutgroup = RX_HAS_CUTGROUP(rex) ? 1 : 0;
+ SV* const oreplsv = GvSV(PL_replgv);
+ /* these three flags are set by various ops to signal information to
+ * the very next op. They have a useful lifetime of exactly one loop
+ * iteration, and are not preserved or restored by state pushes/pops
+ */
+ bool sw = 0; /* the condition value in (?(cond)a|b) */
+ bool minmod = 0; /* the next "{n,m}" is a "{n,m}?" */
+ int logical = 0; /* the following EVAL is:
+ 0: (?{...})
+ 1: (?(?{...})X|Y)
+ 2: (??{...})
+ or the following IFMATCH/UNLESSM is:
+ false: plain (?=foo)
+ true: used as a condition: (?(?=foo))
+ */
+ PAD* last_pad = NULL;
+ dMULTICALL;
+ I32 gimme = G_SCALAR;
+ CV *caller_cv = NULL; /* who called us */
+ CV *last_pushed_cv = NULL; /* most recently called (?{}) CV */
+ CHECKPOINT runops_cp; /* savestack position before executing EVAL */
+ U32 maxopenparen = 0; /* max '(' index seen so far */
+ int to_complement; /* Invert the result? */
+ _char_class_number classnum;
+ bool is_utf8_pat = reginfo->is_utf8_pat;
+
+#ifdef DEBUGGING
+ GET_RE_DEBUG_FLAGS_DECL;
+#endif
+
+ /* shut up 'may be used uninitialized' compiler warnings for dMULTICALL */
+ multicall_oldcatch = 0;
+ multicall_cv = NULL;
+ cx = NULL;
+ PERL_UNUSED_VAR(multicall_cop);
+ PERL_UNUSED_VAR(newsp);
+
+
+ PERL_ARGS_ASSERT_REGMATCH;
+
+ DEBUG_OPTIMISE_r( DEBUG_EXECUTE_r({
+ PerlIO_printf(Perl_debug_log,"regmatch start\n");
+ }));
+
+ st = PL_regmatch_state;
+
+ /* Note that nextchr is a byte even in UTF */
+ SET_nextchr;
+ scan = prog;
+ while (scan != NULL) {
+
+ DEBUG_EXECUTE_r( {
+ SV * const prop = sv_newmortal();
+ regnode *rnext=regnext(scan);
+ DUMP_EXEC_POS( locinput, scan, utf8_target );
+ regprop(rex, prop, scan);
+
+ PerlIO_printf(Perl_debug_log,
+ "%3"IVdf":%*s%s(%"IVdf")\n",
+ (IV)(scan - rexi->program), depth*2, "",
+ SvPVX_const(prop),
+ (PL_regkind[OP(scan)] == END || !rnext) ?
+ 0 : (IV)(rnext - rexi->program));
+ });
+
+ next = scan + NEXT_OFF(scan);
+ if (next == scan)
+ next = NULL;
+ state_num = OP(scan);
+
+ REH_CALL_EXEC_NODE_HOOK(rex, scan, reginfo, st);
+ reenter_switch:
+ to_complement = 0;
+
+ SET_nextchr;
+ assert(nextchr < 256 && (nextchr >= 0 || nextchr == NEXTCHR_EOS));
+
+ switch (state_num) {
+ case BOL: /* /^../ */
+ if (locinput == reginfo->strbeg)
+ break;
+ sayNO;
+
+ case MBOL: /* /^../m */
+ if (locinput == reginfo->strbeg ||
+ (!NEXTCHR_IS_EOS && locinput[-1] == '\n'))
+ {
+ break;
+ }
+ sayNO;
+
+ case SBOL: /* /^../s */
+ if (locinput == reginfo->strbeg)
+ break;
+ sayNO;
+
+ case GPOS: /* \G */
+ if (locinput == reginfo->ganch)
+ break;
+ sayNO;
+
+ case KEEPS: /* \K */
+ /* update the startpoint */
+ st->u.keeper.val = rex->offs[0].start;
+ rex->offs[0].start = locinput - reginfo->strbeg;
+ PUSH_STATE_GOTO(KEEPS_next, next, locinput);
+ assert(0); /*NOTREACHED*/
+ case KEEPS_next_fail:
+ /* rollback the start point change */
+ rex->offs[0].start = st->u.keeper.val;
+ sayNO_SILENT;
+ assert(0); /*NOTREACHED*/
+
+ case EOL: /* /..$/ */
+ goto seol;
+
+ case MEOL: /* /..$/m */
+ if (!NEXTCHR_IS_EOS && nextchr != '\n')
+ sayNO;
+ break;
+
+ case SEOL: /* /..$/s */
+ seol:
+ if (!NEXTCHR_IS_EOS && nextchr != '\n')
+ sayNO;
+ if (reginfo->strend - locinput > 1)
+ sayNO;
+ break;
+
+ case EOS: /* \z */
+ if (!NEXTCHR_IS_EOS)
+ sayNO;
+ break;
+
+ case SANY: /* /./s */
+ if (NEXTCHR_IS_EOS)
+ sayNO;
+ goto increment_locinput;
+
+ case CANY: /* \C */
+ if (NEXTCHR_IS_EOS)
+ sayNO;
+ locinput++;
+ break;
+
+ case REG_ANY: /* /./ */
+ if ((NEXTCHR_IS_EOS) || nextchr == '\n')
+ sayNO;
+ goto increment_locinput;
+
+
+#undef ST
+#define ST st->u.trie
+ case TRIEC: /* (ab|cd) with known charclass */
+ /* In this case the charclass data is available inline so
+ we can fail fast without a lot of extra overhead.
+ */
+ if(!NEXTCHR_IS_EOS && !ANYOF_BITMAP_TEST(scan, nextchr)) {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %sfailed to match trie start class...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
+ );
+ sayNO_SILENT;
+ assert(0); /* NOTREACHED */
+ }
+ /* FALL THROUGH */
+ case TRIE: /* (ab|cd) */
+ /* the basic plan of execution of the trie is:
+ * At the beginning, run though all the states, and
+ * find the longest-matching word. Also remember the position
+ * of the shortest matching word. For example, this pattern:
+ * 1 2 3 4 5
+ * ab|a|x|abcd|abc
+ * when matched against the string "abcde", will generate
+ * accept states for all words except 3, with the longest
+ * matching word being 4, and the shortest being 2 (with
+ * the position being after char 1 of the string).
+ *
+ * Then for each matching word, in word order (i.e. 1,2,4,5),
+ * we run the remainder of the pattern; on each try setting
+ * the current position to the character following the word,
+ * returning to try the next word on failure.
+ *
+ * We avoid having to build a list of words at runtime by
+ * using a compile-time structure, wordinfo[].prev, which
+ * gives, for each word, the previous accepting word (if any).
+ * In the case above it would contain the mappings 1->2, 2->0,
+ * 3->0, 4->5, 5->1. We can use this table to generate, from
+ * the longest word (4 above), a list of all words, by
+ * following the list of prev pointers; this gives us the
+ * unordered list 4,5,1,2. Then given the current word we have
+ * just tried, we can go through the list and find the
+ * next-biggest word to try (so if we just failed on word 2,
+ * the next in the list is 4).
+ *
+ * Since at runtime we don't record the matching position in
+ * the string for each word, we have to work that out for
+ * each word we're about to process. The wordinfo table holds
+ * the character length of each word; given that we recorded
+ * at the start: the position of the shortest word and its
+ * length in chars, we just need to move the pointer the
+ * difference between the two char lengths. Depending on
+ * Unicode status and folding, that's cheap or expensive.
+ *
+ * This algorithm is optimised for the case where are only a
+ * small number of accept states, i.e. 0,1, or maybe 2.
+ * With lots of accepts states, and having to try all of them,
+ * it becomes quadratic on number of accept states to find all
+ * the next words.
+ */
+
+ {
+ /* what type of TRIE am I? (utf8 makes this contextual) */
+ DECL_TRIE_TYPE(scan);
+
+ /* what trie are we using right now */
+ reg_trie_data * const trie
+ = (reg_trie_data*)rexi->data->data[ ARG( scan ) ];
+ HV * widecharmap = MUTABLE_HV(rexi->data->data[ ARG( scan ) + 1 ]);
+ U32 state = trie->startstate;
+
+ if ( trie->bitmap
+ && (NEXTCHR_IS_EOS || !TRIE_BITMAP_TEST(trie, nextchr)))
+ {
+ if (trie->states[ state ].wordnum) {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %smatched empty string...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
+ );
+ if (!trie->jump)
+ break;
+ } else {
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %sfailed to match trie start class...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5])
+ );
+ sayNO_SILENT;
+ }
+ }
+
+ {
+ U8 *uc = ( U8* )locinput;
+
+ STRLEN len = 0;
+ STRLEN foldlen = 0;
+ U8 *uscan = (U8*)NULL;
+ U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
+ U32 charcount = 0; /* how many input chars we have matched */
+ U32 accepted = 0; /* have we seen any accepting states? */
+
+ ST.jump = trie->jump;
+ ST.me = scan;
+ ST.firstpos = NULL;
+ ST.longfold = FALSE; /* char longer if folded => it's harder */
+ ST.nextword = 0;
+
+ /* fully traverse the TRIE; note the position of the
+ shortest accept state and the wordnum of the longest
+ accept state */
+
+ while ( state && uc <= (U8*)(reginfo->strend) ) {
+ U32 base = trie->states[ state ].trans.base;
+ UV uvc = 0;
+ U16 charid = 0;
+ U16 wordnum;
+ wordnum = trie->states[ state ].wordnum;
+
+ if (wordnum) { /* it's an accept state */
+ if (!accepted) {
+ accepted = 1;
+ /* record first match position */
+ if (ST.longfold) {
+ ST.firstpos = (U8*)locinput;
+ ST.firstchars = 0;
+ }
+ else {
+ ST.firstpos = uc;
+ ST.firstchars = charcount;
+ }
+ }
+ if (!ST.nextword || wordnum < ST.nextword)
+ ST.nextword = wordnum;
+ ST.topword = wordnum;
+ }
+
+ DEBUG_TRIE_EXECUTE_r({
+ DUMP_EXEC_POS( (char *)uc, scan, utf8_target );
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sState: %4"UVxf" Accepted: %c ",
+ 2+depth * 2, "", PL_colors[4],
+ (UV)state, (accepted ? 'Y' : 'N'));
+ });
+
+ /* read a char and goto next state */
+ if ( base && (foldlen || uc < (U8*)(reginfo->strend))) {
+ I32 offset;
+ REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc,
+ uscan, len, uvc, charid, foldlen,
+ foldbuf, uniflags);
+ charcount++;
+ if (foldlen>0)
+ ST.longfold = TRUE;
+ if (charid &&
+ ( ((offset =
+ base + charid - 1 - trie->uniquecharcount)) >= 0)
+
+ && ((U32)offset < trie->lasttrans)
+ && trie->trans[offset].check == state)
+ {
+ state = trie->trans[offset].next;
+ }
+ else {
+ state = 0;
+ }
+ uc += len;
+
+ }
+ else {
+ state = 0;
+ }
+ DEBUG_TRIE_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log,
+ "Charid:%3x CP:%4"UVxf" After State: %4"UVxf"%s\n",
+ charid, uvc, (UV)state, PL_colors[5] );
+ );
+ }
+ if (!accepted)
+ sayNO;
+
+ /* calculate total number of accept states */
+ {
+ U16 w = ST.topword;
+ accepted = 0;
+ while (w) {
+ w = trie->wordinfo[w].prev;
+ accepted++;
+ }
+ ST.accepted = accepted;
+ }
+
+ DEBUG_EXECUTE_r(
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sgot %"IVdf" possible matches%s\n",
+ REPORT_CODE_OFF + depth * 2, "",
+ PL_colors[4], (IV)ST.accepted, PL_colors[5] );
+ );
+ goto trie_first_try; /* jump into the fail handler */
+ }}
+ assert(0); /* NOTREACHED */
+
+ case TRIE_next_fail: /* we failed - try next alternative */
+ {
+ U8 *uc;
+ if ( ST.jump) {
+ REGCP_UNWIND(ST.cp);
+ UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
+ }
+ if (!--ST.accepted) {
+ DEBUG_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sTRIE failed...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4],
+ PL_colors[5] );
+ });
+ sayNO_SILENT;
+ }
+ {
+ /* Find next-highest word to process. Note that this code
+ * is O(N^2) per trie run (O(N) per branch), so keep tight */
+ U16 min = 0;
+ U16 word;
+ U16 const nextword = ST.nextword;
+ reg_trie_wordinfo * const wordinfo
+ = ((reg_trie_data*)rexi->data->data[ARG(ST.me)])->wordinfo;
+ for (word=ST.topword; word; word=wordinfo[word].prev) {
+ if (word > nextword && (!min || word < min))
+ min = word;
+ }
+ ST.nextword = min;
+ }
+
+ trie_first_try:
+ if (do_cutgroup) {
+ do_cutgroup = 0;
+ no_final = 0;
+ }
+
+ if ( ST.jump) {
+ ST.lastparen = rex->lastparen;
+ ST.lastcloseparen = rex->lastcloseparen;
+ REGCP_SET(ST.cp);
+ }
+
+ /* find start char of end of current word */
+ {
+ U32 chars; /* how many chars to skip */
+ reg_trie_data * const trie
+ = (reg_trie_data*)rexi->data->data[ARG(ST.me)];
+
+ assert((trie->wordinfo[ST.nextword].len - trie->prefixlen)
+ >= ST.firstchars);
+ chars = (trie->wordinfo[ST.nextword].len - trie->prefixlen)
+ - ST.firstchars;
+ uc = ST.firstpos;
+
+ if (ST.longfold) {
+ /* the hard option - fold each char in turn and find
+ * its folded length (which may be different */
+ U8 foldbuf[UTF8_MAXBYTES_CASE + 1];
+ STRLEN foldlen;
+ STRLEN len;
+ UV uvc;
+ U8 *uscan;
+
+ while (chars) {
+ if (utf8_target) {
+ uvc = utf8n_to_uvuni((U8*)uc, UTF8_MAXLEN, &len,
+ uniflags);
+ uc += len;
+ }
+ else {
+ uvc = *uc;
+ uc++;
+ }
+ uvc = to_uni_fold(uvc, foldbuf, &foldlen);
+ uscan = foldbuf;
+ while (foldlen) {
+ if (!--chars)
+ break;
+ uvc = utf8n_to_uvuni(uscan, UTF8_MAXLEN, &len,
+ uniflags);
+ uscan += len;
+ foldlen -= len;
+ }
+ }
+ }
+ else {
+ if (utf8_target)
+ while (chars--)
+ uc += UTF8SKIP(uc);
+ else
+ uc += chars;
+ }
+ }
+
+ scan = ST.me + ((ST.jump && ST.jump[ST.nextword])
+ ? ST.jump[ST.nextword]
+ : NEXT_OFF(ST.me));
+
+ DEBUG_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sTRIE matched word #%d, continuing%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4],
+ ST.nextword,
+ PL_colors[5]
+ );
+ });
+
+ if (ST.accepted > 1 || has_cutgroup) {
+ PUSH_STATE_GOTO(TRIE_next, scan, (char*)uc);
+ assert(0); /* NOTREACHED */
+ }
+ /* only one choice left - just continue */
+ DEBUG_EXECUTE_r({
+ AV *const trie_words
+ = MUTABLE_AV(rexi->data->data[ARG(ST.me)+TRIE_WORDS_OFFSET]);
+ SV ** const tmp = av_fetch( trie_words,
+ ST.nextword-1, 0 );
+ SV *sv= tmp ? sv_newmortal() : NULL;
+
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sonly one match left, short-circuiting: #%d <%s>%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4],
+ ST.nextword,
+ tmp ? pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 0,
+ PL_colors[0], PL_colors[1],
+ (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0)|PERL_PV_ESCAPE_NONASCII
+ )
+ : "not compiled under -Dr",
+ PL_colors[5] );
+ });
+
+ locinput = (char*)uc;
+ continue; /* execute rest of RE */
+ assert(0); /* NOTREACHED */
+ }
+#undef ST
+
+ case EXACT: { /* /abc/ */
+ char *s = STRING(scan);
+ ln = STR_LEN(scan);
+ if (utf8_target != is_utf8_pat) {
+ /* The target and the pattern have differing utf8ness. */
+ char *l = locinput;
+ const char * const e = s + ln;
+
+ if (utf8_target) {
+ /* The target is utf8, the pattern is not utf8.
+ * Above-Latin1 code points can't match the pattern;
+ * invariants match exactly, and the other Latin1 ones need
+ * to be downgraded to a single byte in order to do the
+ * comparison. (If we could be confident that the target
+ * is not malformed, this could be refactored to have fewer
+ * tests by just assuming that if the first bytes match, it
+ * is an invariant, but there are tests in the test suite
+ * dealing with (??{...}) which violate this) */
+ while (s < e) {
+ if (l >= reginfo->strend
+ || UTF8_IS_ABOVE_LATIN1(* (U8*) l))
+ {
+ sayNO;
+ }
+ if (UTF8_IS_INVARIANT(*(U8*)l)) {
+ if (*l != *s) {
+ sayNO;
+ }
+ l++;
+ }
+ else {
+ if (TWO_BYTE_UTF8_TO_UNI(*l, *(l+1)) != * (U8*) s) {
+ sayNO;
+ }
+ l += 2;
+ }
+ s++;
+ }
+ }
+ else {
+ /* The target is not utf8, the pattern is utf8. */
+ while (s < e) {
+ if (l >= reginfo->strend
+ || UTF8_IS_ABOVE_LATIN1(* (U8*) s))
+ {
+ sayNO;
+ }
+ if (UTF8_IS_INVARIANT(*(U8*)s)) {
+ if (*s != *l) {
+ sayNO;
+ }
+ s++;
+ }
+ else {
+ if (TWO_BYTE_UTF8_TO_UNI(*s, *(s+1)) != * (U8*) l) {
+ sayNO;
+ }
+ s += 2;
+ }
+ l++;
+ }
+ }
+ locinput = l;
+ }
+ else {
+ /* The target and the pattern have the same utf8ness. */
+ /* Inline the first character, for speed. */
+ if (reginfo->strend - locinput < ln
+ || UCHARAT(s) != nextchr
+ || (ln > 1 && memNE(s, locinput, ln)))
+ {
+ sayNO;
+ }
+ locinput += ln;
+ }
+ break;
+ }
+
+ case EXACTFL: { /* /abc/il */
+ re_fold_t folder;
+ const U8 * fold_array;
+ const char * s;
+ U32 fold_utf8_flags;
+
+ RX_MATCH_TAINTED_on(reginfo->prog);
+ folder = foldEQ_locale;
+ fold_array = PL_fold_locale;
+ fold_utf8_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_exactf;
+
+ case EXACTFU_SS: /* /\x{df}/iu */
+ case EXACTFU_TRICKYFOLD: /* /\x{390}/iu */
+ case EXACTFU: /* /abc/iu */
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ fold_utf8_flags = is_utf8_pat ? FOLDEQ_S1_ALREADY_FOLDED : 0;
+ goto do_exactf;
+
+ case EXACTFA: /* /abc/iaa */
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ fold_utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_exactf;
+
+ case EXACTF: /* /abc/i */
+ folder = foldEQ;
+ fold_array = PL_fold;
+ fold_utf8_flags = 0;
+
+ do_exactf:
+ s = STRING(scan);
+ ln = STR_LEN(scan);
+
+ if (utf8_target || is_utf8_pat || state_num == EXACTFU_SS) {
+ /* Either target or the pattern are utf8, or has the issue where
+ * the fold lengths may differ. */
+ const char * const l = locinput;
+ char *e = reginfo->strend;
+
+ if (! foldEQ_utf8_flags(s, 0, ln, is_utf8_pat,
+ l, &e, 0, utf8_target, fold_utf8_flags))
+ {
+ sayNO;
+ }
+ locinput = e;
+ break;
+ }
+
+ /* Neither the target nor the pattern are utf8 */
+ if (UCHARAT(s) != nextchr
+ && !NEXTCHR_IS_EOS
+ && UCHARAT(s) != fold_array[nextchr])
+ {
+ sayNO;
+ }
+ if (reginfo->strend - locinput < ln)
+ sayNO;
+ if (ln > 1 && ! folder(s, locinput, ln))
+ sayNO;
+ locinput += ln;
+ break;
+ }
+
+ /* XXX Could improve efficiency by separating these all out using a
+ * macro or in-line function. At that point regcomp.c would no longer
+ * have to set the FLAGS fields of these */
+ case BOUNDL: /* /\b/l */
+ case NBOUNDL: /* /\B/l */
+ RX_MATCH_TAINTED_on(reginfo->prog);
+ /* FALL THROUGH */
+ case BOUND: /* /\b/ */
+ case BOUNDU: /* /\b/u */
+ case BOUNDA: /* /\b/a */
+ case NBOUND: /* /\B/ */
+ case NBOUNDU: /* /\B/u */
+ case NBOUNDA: /* /\B/a */
+ /* was last char in word? */
+ if (utf8_target
+ && FLAGS(scan) != REGEX_ASCII_RESTRICTED_CHARSET
+ && FLAGS(scan) != REGEX_ASCII_MORE_RESTRICTED_CHARSET)
+ {
+ if (locinput == reginfo->strbeg)
+ ln = '\n';
+ else {
+ const U8 * const r =
+ reghop3((U8*)locinput, -1, (U8*)(reginfo->strbeg));
+
+ ln = utf8n_to_uvchr(r, UTF8SKIP(r), 0, uniflags);
+ }
+ if (FLAGS(scan) != REGEX_LOCALE_CHARSET) {
+ ln = isWORDCHAR_uni(ln);
+ if (NEXTCHR_IS_EOS)
+ n = 0;
+ else {
+ LOAD_UTF8_CHARCLASS_ALNUM();
+ n = swash_fetch(PL_utf8_swash_ptrs[_CC_WORDCHAR], (U8*)locinput,
+ utf8_target);
+ }
+ }
+ else {
+ ln = isWORDCHAR_LC_uvchr(UNI_TO_NATIVE(ln));
+ n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_LC_utf8((U8*)locinput);
+ }
+ }
+ else {
+
+ /* Here the string isn't utf8, or is utf8 and only ascii
+ * characters are to match \w. In the latter case looking at
+ * the byte just prior to the current one may be just the final
+ * byte of a multi-byte character. This is ok. There are two
+ * cases:
+ * 1) it is a single byte character, and then the test is doing
+ * just what it's supposed to.
+ * 2) it is a multi-byte character, in which case the final
+ * byte is never mistakable for ASCII, and so the test
+ * will say it is not a word character, which is the
+ * correct answer. */
+ ln = (locinput != reginfo->strbeg) ?
+ UCHARAT(locinput - 1) : '\n';
+ switch (FLAGS(scan)) {
+ case REGEX_UNICODE_CHARSET:
+ ln = isWORDCHAR_L1(ln);
+ n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_L1(nextchr);
+ break;
+ case REGEX_LOCALE_CHARSET:
+ ln = isWORDCHAR_LC(ln);
+ n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_LC(nextchr);
+ break;
+ case REGEX_DEPENDS_CHARSET:
+ ln = isWORDCHAR(ln);
+ n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR(nextchr);
+ break;
+ case REGEX_ASCII_RESTRICTED_CHARSET:
+ case REGEX_ASCII_MORE_RESTRICTED_CHARSET:
+ ln = isWORDCHAR_A(ln);
+ n = NEXTCHR_IS_EOS ? 0 : isWORDCHAR_A(nextchr);
+ break;
+ default:
+ Perl_croak(aTHX_ "panic: Unexpected FLAGS %u in op %u", FLAGS(scan), OP(scan));
+ break;
+ }
+ }
+ /* Note requires that all BOUNDs be lower than all NBOUNDs in
+ * regcomp.sym */
+ if (((!ln) == (!n)) == (OP(scan) < NBOUND))
+ sayNO;
+ break;
+
+ case ANYOF: /* /[abc]/ */
+ case ANYOF_WARN_SUPER:
+ if (NEXTCHR_IS_EOS)
+ sayNO;
+ if (utf8_target) {
+ if (!reginclass(rex, scan, (U8*)locinput, utf8_target))
+ sayNO;
+ locinput += UTF8SKIP(locinput);
+ }
+ else {
+ if (!REGINCLASS(rex, scan, (U8*)locinput))
+ sayNO;
+ locinput++;
+ }
+ break;
+
+ /* The argument (FLAGS) to all the POSIX node types is the class number
+ * */
+
+ case NPOSIXL: /* \W or [:^punct:] etc. under /l */
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXL: /* \w or [:punct:] etc. under /l */
+ if (NEXTCHR_IS_EOS)
+ sayNO;
+
+ /* The locale hasn't influenced the outcome before this, so defer
+ * tainting until now */
+ RX_MATCH_TAINTED_on(reginfo->prog);
+
+ /* Use isFOO_lc() for characters within Latin1. (Note that
+ * UTF8_IS_INVARIANT works even on non-UTF-8 strings, or else
+ * wouldn't be invariant) */
+ if (UTF8_IS_INVARIANT(nextchr) || ! utf8_target) {
+ if (! (to_complement ^ cBOOL(isFOO_lc(FLAGS(scan), (U8) nextchr)))) {
+ sayNO;
+ }
+ }
+ else if (UTF8_IS_DOWNGRADEABLE_START(nextchr)) {
+ if (! (to_complement ^ cBOOL(isFOO_lc(FLAGS(scan),
+ (U8) TWO_BYTE_UTF8_TO_UNI(nextchr,
+ *(locinput + 1))))))
+ {
+ sayNO;
+ }
+ }
+ else { /* Here, must be an above Latin-1 code point */
+ goto utf8_posix_not_eos;
+ }
+
+ /* Here, must be utf8 */
+ locinput += UTF8SKIP(locinput);
+ break;
+
+ case NPOSIXD: /* \W or [:^punct:] etc. under /d */
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXD: /* \w or [:punct:] etc. under /d */
+ if (utf8_target) {
+ goto utf8_posix;
+ }
+ goto posixa;
+
+ case NPOSIXA: /* \W or [:^punct:] etc. under /a */
+
+ if (NEXTCHR_IS_EOS) {
+ sayNO;
+ }
+
+ /* All UTF-8 variants match */
+ if (! UTF8_IS_INVARIANT(nextchr)) {
+ goto increment_locinput;
+ }
+
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXA: /* \w or [:punct:] etc. under /a */
+
+ posixa:
+ /* We get here through POSIXD, NPOSIXD, and NPOSIXA when not in
+ * UTF-8, and also from NPOSIXA even in UTF-8 when the current
+ * character is a single byte */
+
+ if (NEXTCHR_IS_EOS
+ || ! (to_complement ^ cBOOL(_generic_isCC_A(nextchr,
+ FLAGS(scan)))))
+ {
+ sayNO;
+ }
+
+ /* Here we are either not in utf8, or we matched a utf8-invariant,
+ * so the next char is the next byte */
+ locinput++;
+ break;
+
+ case NPOSIXU: /* \W or [:^punct:] etc. under /u */
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXU: /* \w or [:punct:] etc. under /u */
+ utf8_posix:
+ if (NEXTCHR_IS_EOS) {
+ sayNO;
+ }
+ utf8_posix_not_eos:
+
+ /* Use _generic_isCC() for characters within Latin1. (Note that
+ * UTF8_IS_INVARIANT works even on non-UTF-8 strings, or else
+ * wouldn't be invariant) */
+ if (UTF8_IS_INVARIANT(nextchr) || ! utf8_target) {
+ if (! (to_complement ^ cBOOL(_generic_isCC(nextchr,
+ FLAGS(scan)))))
+ {
+ sayNO;
+ }
+ locinput++;
+ }
+ else if (UTF8_IS_DOWNGRADEABLE_START(nextchr)) {
+ if (! (to_complement
+ ^ cBOOL(_generic_isCC(TWO_BYTE_UTF8_TO_UNI(nextchr,
+ *(locinput + 1)),
+ FLAGS(scan)))))
+ {
+ sayNO;
+ }
+ locinput += 2;
+ }
+ else { /* Handle above Latin-1 code points */
+ classnum = (_char_class_number) FLAGS(scan);
+ if (classnum < _FIRST_NON_SWASH_CC) {
+
+ /* Here, uses a swash to find such code points. Load if if
+ * not done already */
+ if (! PL_utf8_swash_ptrs[classnum]) {
+ U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
+ PL_utf8_swash_ptrs[classnum]
+ = _core_swash_init("utf8",
+ swash_property_names[classnum],
+ &PL_sv_undef, 1, 0, NULL, &flags);
+ }
+ if (! (to_complement
+ ^ cBOOL(swash_fetch(PL_utf8_swash_ptrs[classnum],
+ (U8 *) locinput, TRUE))))
+ {
+ sayNO;
+ }
+ }
+ else { /* Here, uses macros to find above Latin-1 code points */
+ switch (classnum) {
+ case _CC_ENUM_SPACE: /* XXX would require separate
+ code if we revert the change
+ of \v matching this */
+ case _CC_ENUM_PSXSPC:
+ if (! (to_complement
+ ^ cBOOL(is_XPERLSPACE_high(locinput))))
+ {
+ sayNO;
+ }
+ break;
+ case _CC_ENUM_BLANK:
+ if (! (to_complement
+ ^ cBOOL(is_HORIZWS_high(locinput))))
+ {
+ sayNO;
+ }
+ break;
+ case _CC_ENUM_XDIGIT:
+ if (! (to_complement
+ ^ cBOOL(is_XDIGIT_high(locinput))))
+ {
+ sayNO;
+ }
+ break;
+ case _CC_ENUM_VERTSPACE:
+ if (! (to_complement
+ ^ cBOOL(is_VERTWS_high(locinput))))
+ {
+ sayNO;
+ }
+ break;
+ default: /* The rest, e.g. [:cntrl:], can't match
+ above Latin1 */
+ if (! to_complement) {
+ sayNO;
+ }
+ break;
+ }
+ }
+ locinput += UTF8SKIP(locinput);
+ }
+ break;
+
+ case CLUMP: /* Match \X: logical Unicode character. This is defined as
+ a Unicode extended Grapheme Cluster */
+ /* From http://www.unicode.org/reports/tr29 (5.2 version). An
+ extended Grapheme Cluster is:
+
+ CR LF
+ | Prepend* Begin Extend*
+ | .
+
+ Begin is: ( Special_Begin | ! Control )
+ Special_Begin is: ( Regional-Indicator+ | Hangul-syllable )
+ Extend is: ( Grapheme_Extend | Spacing_Mark )
+ Control is: [ GCB_Control | CR | LF ]
+ Hangul-syllable is: ( T+ | ( L* ( L | ( LVT | ( V | LV ) V* ) T* ) ))
+
+ If we create a 'Regular_Begin' = Begin - Special_Begin, then
+ we can rewrite
+
+ Begin is ( Regular_Begin + Special Begin )
+
+ It turns out that 98.4% of all Unicode code points match
+ Regular_Begin. Doing it this way eliminates a table match in
+ the previous implementation for almost all Unicode code points.
+
+ There is a subtlety with Prepend* which showed up in testing.
+ Note that the Begin, and only the Begin is required in:
+ | Prepend* Begin Extend*
+ Also, Begin contains '! Control'. A Prepend must be a
+ '! Control', which means it must also be a Begin. What it
+ comes down to is that if we match Prepend* and then find no
+ suitable Begin afterwards, that if we backtrack the last
+ Prepend, that one will be a suitable Begin.
+ */
+
+ if (NEXTCHR_IS_EOS)
+ sayNO;
+ if (! utf8_target) {
+
+ /* Match either CR LF or '.', as all the other possibilities
+ * require utf8 */
+ locinput++; /* Match the . or CR */
+ if (nextchr == '\r' /* And if it was CR, and the next is LF,
+ match the LF */
+ && locinput < reginfo->strend
+ && UCHARAT(locinput) == '\n')
+ {
+ locinput++;
+ }
+ }
+ else {
+
+ /* Utf8: See if is ( CR LF ); already know that locinput <
+ * reginfo->strend, so locinput+1 is in bounds */
+ if ( nextchr == '\r' && locinput+1 < reginfo->strend
+ && UCHARAT(locinput + 1) == '\n')
+ {
+ locinput += 2;
+ }
+ else {
+ STRLEN len;
+
+ /* In case have to backtrack to beginning, then match '.' */
+ char *starting = locinput;
+
+ /* In case have to backtrack the last prepend */
+ char *previous_prepend = NULL;
+
+ LOAD_UTF8_CHARCLASS_GCB();
+
+ /* Match (prepend)* */
+ while (locinput < reginfo->strend
+ && (len = is_GCB_Prepend_utf8(locinput)))
+ {
+ previous_prepend = locinput;
+ locinput += len;
+ }
+
+ /* As noted above, if we matched a prepend character, but
+ * the next thing won't match, back off the last prepend we
+ * matched, as it is guaranteed to match the begin */
+ if (previous_prepend
+ && (locinput >= reginfo->strend
+ || (! swash_fetch(PL_utf8_X_regular_begin,
+ (U8*)locinput, utf8_target)
+ && ! is_GCB_SPECIAL_BEGIN_START_utf8(locinput)))
+ )
+ {
+ locinput = previous_prepend;
+ }
+
+ /* Note that here we know reginfo->strend > locinput, as we
+ * tested that upon input to this switch case, and if we
+ * moved locinput forward, we tested the result just above
+ * and it either passed, or we backed off so that it will
+ * now pass */
+ if (swash_fetch(PL_utf8_X_regular_begin,
+ (U8*)locinput, utf8_target)) {
+ locinput += UTF8SKIP(locinput);
+ }
+ else if (! is_GCB_SPECIAL_BEGIN_START_utf8(locinput)) {
+
+ /* Here did not match the required 'Begin' in the
+ * second term. So just match the very first
+ * character, the '.' of the final term of the regex */
+ locinput = starting + UTF8SKIP(starting);
+ goto exit_utf8;
+ } else {
+
+ /* Here is a special begin. It can be composed of
+ * several individual characters. One possibility is
+ * RI+ */
+ if ((len = is_GCB_RI_utf8(locinput))) {
+ locinput += len;
+ while (locinput < reginfo->strend
+ && (len = is_GCB_RI_utf8(locinput)))
+ {
+ locinput += len;
+ }
+ } else if ((len = is_GCB_T_utf8(locinput))) {
+ /* Another possibility is T+ */
+ locinput += len;
+ while (locinput < reginfo->strend
+ && (len = is_GCB_T_utf8(locinput)))
+ {
+ locinput += len;
+ }
+ } else {
+
+ /* Here, neither RI+ nor T+; must be some other
+ * Hangul. That means it is one of the others: L,
+ * LV, LVT or V, and matches:
+ * L* (L | LVT T* | V * V* T* | LV V* T*) */
+
+ /* Match L* */
+ while (locinput < reginfo->strend
+ && (len = is_GCB_L_utf8(locinput)))
+ {
+ locinput += len;
+ }
+
+ /* Here, have exhausted L*. If the next character
+ * is not an LV, LVT nor V, it means we had to have
+ * at least one L, so matches L+ in the original
+ * equation, we have a complete hangul syllable.
+ * Are done. */
+
+ if (locinput < reginfo->strend
+ && is_GCB_LV_LVT_V_utf8(locinput))
+ {
+ /* Otherwise keep going. Must be LV, LVT or V.
+ * See if LVT, by first ruling out V, then LV */
+ if (! is_GCB_V_utf8(locinput)
+ /* All but every TCount one is LV */
+ && (valid_utf8_to_uvchr((U8 *) locinput,
+ NULL)
+ - SBASE)
+ % TCount != 0)
+ {
+ locinput += UTF8SKIP(locinput);
+ } else {
+
+ /* Must be V or LV. Take it, then match
+ * V* */
+ locinput += UTF8SKIP(locinput);
+ while (locinput < reginfo->strend
+ && (len = is_GCB_V_utf8(locinput)))
+ {
+ locinput += len;
+ }
+ }
+
+ /* And any of LV, LVT, or V can be followed
+ * by T* */
+ while (locinput < reginfo->strend
+ && (len = is_GCB_T_utf8(locinput)))
+ {
+ locinput += len;
+ }
+ }
+ }
+ }
+
+ /* Match any extender */
+ while (locinput < reginfo->strend
+ && swash_fetch(PL_utf8_X_extend,
+ (U8*)locinput, utf8_target))
+ {
+ locinput += UTF8SKIP(locinput);
+ }
+ }
+ exit_utf8:
+ if (locinput > reginfo->strend) sayNO;
+ }
+ break;
+
+ case NREFFL: /* /\g{name}/il */
+ { /* The capture buffer cases. The ones beginning with N for the
+ named buffers just convert to the equivalent numbered and
+ pretend they were called as the corresponding numbered buffer
+ op. */
+ /* don't initialize these in the declaration, it makes C++
+ unhappy */
+ const char *s;
+ char type;
+ re_fold_t folder;
+ const U8 *fold_array;
+ UV utf8_fold_flags;
+
+ RX_MATCH_TAINTED_on(reginfo->prog);
+ folder = foldEQ_locale;
+ fold_array = PL_fold_locale;
+ type = REFFL;
+ utf8_fold_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_nref;
+
+ case NREFFA: /* /\g{name}/iaa */
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ type = REFFA;
+ utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_nref;
+
+ case NREFFU: /* /\g{name}/iu */
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ type = REFFU;
+ utf8_fold_flags = 0;
+ goto do_nref;
+
+ case NREFF: /* /\g{name}/i */
+ folder = foldEQ;
+ fold_array = PL_fold;
+ type = REFF;
+ utf8_fold_flags = 0;
+ goto do_nref;
+
+ case NREF: /* /\g{name}/ */
+ type = REF;
+ folder = NULL;
+ fold_array = NULL;
+ utf8_fold_flags = 0;
+ do_nref:
+
+ /* For the named back references, find the corresponding buffer
+ * number */
+ n = reg_check_named_buff_matched(rex,scan);
+
+ if ( ! n ) {
+ sayNO;
+ }
+ goto do_nref_ref_common;
+
+ case REFFL: /* /\1/il */
+ RX_MATCH_TAINTED_on(reginfo->prog);
+ folder = foldEQ_locale;
+ fold_array = PL_fold_locale;
+ utf8_fold_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_ref;
+
+ case REFFA: /* /\1/iaa */
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_ref;
+
+ case REFFU: /* /\1/iu */
+ folder = foldEQ_latin1;
+ fold_array = PL_fold_latin1;
+ utf8_fold_flags = 0;
+ goto do_ref;
+
+ case REFF: /* /\1/i */
+ folder = foldEQ;
+ fold_array = PL_fold;
+ utf8_fold_flags = 0;
+ goto do_ref;
+
+ case REF: /* /\1/ */
+ folder = NULL;
+ fold_array = NULL;
+ utf8_fold_flags = 0;
+
+ do_ref:
+ type = OP(scan);
+ n = ARG(scan); /* which paren pair */
+
+ do_nref_ref_common:
+ ln = rex->offs[n].start;
+ reginfo->poscache_iter = reginfo->poscache_maxiter; /* Void cache */
+ if (rex->lastparen < n || ln == -1)
+ sayNO; /* Do not match unless seen CLOSEn. */
+ if (ln == rex->offs[n].end)
+ break;
+
+ s = reginfo->strbeg + ln;
+ if (type != REF /* REF can do byte comparison */
+ && (utf8_target || type == REFFU))
+ { /* XXX handle REFFL better */
+ char * limit = reginfo->strend;
+
+ /* This call case insensitively compares the entire buffer
+ * at s, with the current input starting at locinput, but
+ * not going off the end given by reginfo->strend, and
+ * returns in <limit> upon success, how much of the
+ * current input was matched */
+ if (! foldEQ_utf8_flags(s, NULL, rex->offs[n].end - ln, utf8_target,
+ locinput, &limit, 0, utf8_target, utf8_fold_flags))
+ {
+ sayNO;
+ }
+ locinput = limit;
+ break;
+ }
+
+ /* Not utf8: Inline the first character, for speed. */
+ if (!NEXTCHR_IS_EOS &&
+ UCHARAT(s) != nextchr &&
+ (type == REF ||
+ UCHARAT(s) != fold_array[nextchr]))
+ sayNO;
+ ln = rex->offs[n].end - ln;
+ if (locinput + ln > reginfo->strend)
+ sayNO;
+ if (ln > 1 && (type == REF
+ ? memNE(s, locinput, ln)
+ : ! folder(s, locinput, ln)))
+ sayNO;
+ locinput += ln;
+ break;
+ }
+
+ case NOTHING: /* null op; e.g. the 'nothing' following
+ * the '*' in m{(a+|b)*}' */
+ break;
+ case TAIL: /* placeholder while compiling (A|B|C) */
+ break;
+
+ case BACK: /* ??? doesn't appear to be used ??? */
+ break;
+
+#undef ST
+#define ST st->u.eval
+ {
+ SV *ret;
+ REGEXP *re_sv;
+ regexp *re;
+ regexp_internal *rei;
+ regnode *startpoint;
+
+ case GOSTART: /* (?R) */
+ case GOSUB: /* /(...(?1))/ /(...(?&foo))/ */
+ if (cur_eval && cur_eval->locinput==locinput) {
+ if (cur_eval->u.eval.close_paren == (U32)ARG(scan))
+ Perl_croak(aTHX_ "Infinite recursion in regex");
+ if ( ++nochange_depth > max_nochange_depth )
+ Perl_croak(aTHX_
+ "Pattern subroutine nesting without pos change"
+ " exceeded limit in regex");
+ } else {
+ nochange_depth = 0;
+ }
+ re_sv = rex_sv;
+ re = rex;
+ rei = rexi;
+ if (OP(scan)==GOSUB) {
+ startpoint = scan + ARG2L(scan);
+ ST.close_paren = ARG(scan);
+ } else {
+ startpoint = rei->program+1;
+ ST.close_paren = 0;
+ }
+ goto eval_recurse_doit;
+ assert(0); /* NOTREACHED */
+
+ case EVAL: /* /(?{A})B/ /(??{A})B/ and /(?(?{A})X|Y)B/ */
+ if (cur_eval && cur_eval->locinput==locinput) {
+ if ( ++nochange_depth > max_nochange_depth )
+ Perl_croak(aTHX_ "EVAL without pos change exceeded limit in regex");
+ } else {
+ nochange_depth = 0;
+ }
+ {
+ /* execute the code in the {...} */
+
+ dSP;
+ IV before;
+ OP * const oop = PL_op;
+ COP * const ocurcop = PL_curcop;
+ OP *nop;
+ CV *newcv;
+
+ /* save *all* paren positions */
+ regcppush(rex, 0, maxopenparen);
+ REGCP_SET(runops_cp);
+
+ if (!caller_cv)
+ caller_cv = find_runcv(NULL);
+
+ n = ARG(scan);
+
+ if (rexi->data->what[n] == 'r') { /* code from an external qr */
+ newcv = (ReANY(
+ (REGEXP*)(rexi->data->data[n])
+ ))->qr_anoncv
+ ;
+ nop = (OP*)rexi->data->data[n+1];
+ }
+ else if (rexi->data->what[n] == 'l') { /* literal code */
+ newcv = caller_cv;
+ nop = (OP*)rexi->data->data[n];
+ assert(CvDEPTH(newcv));
+ }
+ else {
+ /* literal with own CV */
+ assert(rexi->data->what[n] == 'L');
+ newcv = rex->qr_anoncv;
+ nop = (OP*)rexi->data->data[n];
+ }
+
+ /* normally if we're about to execute code from the same
+ * CV that we used previously, we just use the existing
+ * CX stack entry. However, its possible that in the
+ * meantime we may have backtracked, popped from the save
+ * stack, and undone the SAVECOMPPAD(s) associated with
+ * PUSH_MULTICALL; in which case PL_comppad no longer
+ * points to newcv's pad. */
+ if (newcv != last_pushed_cv || PL_comppad != last_pad)
+ {
+ U8 flags = (CXp_SUB_RE |
+ ((newcv == caller_cv) ? CXp_SUB_RE_FAKE : 0));
+ if (last_pushed_cv) {
+ CHANGE_MULTICALL_FLAGS(newcv, flags);
+ }
+ else {
+ PUSH_MULTICALL_FLAGS(newcv, flags);
+ }
+ last_pushed_cv = newcv;
+ }
+ else {
+ /* these assignments are just to silence compiler
+ * warnings */
+ multicall_cop = NULL;
+ newsp = NULL;
+ }
+ last_pad = PL_comppad;
+
+ /* the initial nextstate you would normally execute
+ * at the start of an eval (which would cause error
+ * messages to come from the eval), may be optimised
+ * away from the execution path in the regex code blocks;
+ * so manually set PL_curcop to it initially */
+ {
+ OP *o = cUNOPx(nop)->op_first;
+ assert(o->op_type == OP_NULL);
+ if (o->op_targ == OP_SCOPE) {
+ o = cUNOPo->op_first;
+ }
+ else {
+ assert(o->op_targ == OP_LEAVE);
+ o = cUNOPo->op_first;
+ assert(o->op_type == OP_ENTER);
+ o = o->op_sibling;
+ }
+
+ if (o->op_type != OP_STUB) {
+ assert( o->op_type == OP_NEXTSTATE
+ || o->op_type == OP_DBSTATE
+ || (o->op_type == OP_NULL
+ && ( o->op_targ == OP_NEXTSTATE
+ || o->op_targ == OP_DBSTATE
+ )
+ )
+ );
+ PL_curcop = (COP*)o;
+ }
+ }
+ nop = nop->op_next;
+
+ DEBUG_STATE_r( PerlIO_printf(Perl_debug_log,
+ " re EVAL PL_op=0x%"UVxf"\n", PTR2UV(nop)) );
+
+ rex->offs[0].end = locinput - reginfo->strbeg;
+ if (reginfo->info_aux_eval->pos_magic)
+ reginfo->info_aux_eval->pos_magic->mg_len
+ = locinput - reginfo->strbeg;
+
+ if (sv_yes_mark) {
+ SV *sv_mrk = get_sv("REGMARK", 1);
+ sv_setsv(sv_mrk, sv_yes_mark);
+ }
+
+ /* we don't use MULTICALL here as we want to call the
+ * first op of the block of interest, rather than the
+ * first op of the sub */
+ before = (IV)(SP-PL_stack_base);
+ PL_op = nop;
+ CALLRUNOPS(aTHX); /* Scalar context. */
+ SPAGAIN;
+ if ((IV)(SP-PL_stack_base) == before)
+ ret = &PL_sv_undef; /* protect against empty (?{}) blocks. */
+ else {
+ ret = POPs;
+ PUTBACK;
+ }
+
+ /* before restoring everything, evaluate the returned
+ * value, so that 'uninit' warnings don't use the wrong
+ * PL_op or pad. Also need to process any magic vars
+ * (e.g. $1) *before* parentheses are restored */
+
+ PL_op = NULL;
+
+ re_sv = NULL;
+ if (logical == 0) /* (?{})/ */
+ sv_setsv(save_scalar(PL_replgv), ret); /* $^R */
+ else if (logical == 1) { /* /(?(?{...})X|Y)/ */
+ sw = cBOOL(SvTRUE(ret));
+ logical = 0;
+ }
+ else { /* /(??{}) */
+ /* if its overloaded, let the regex compiler handle
+ * it; otherwise extract regex, or stringify */
+ if (!SvAMAGIC(ret)) {
+ SV *sv = ret;
+ if (SvROK(sv))
+ sv = SvRV(sv);
+ if (SvTYPE(sv) == SVt_REGEXP)
+ re_sv = (REGEXP*) sv;
+ else if (SvSMAGICAL(sv)) {
+ MAGIC *mg = mg_find(sv, PERL_MAGIC_qr);
+ if (mg)
+ re_sv = (REGEXP *) mg->mg_obj;
+ }
+
+ /* force any magic, undef warnings here */
+ if (!re_sv) {
+ ret = sv_mortalcopy(ret);
+ (void) SvPV_force_nolen(ret);
+ }
+ }
+
+ }
+
+ /* *** Note that at this point we don't restore
+ * PL_comppad, (or pop the CxSUB) on the assumption it may
+ * be used again soon. This is safe as long as nothing
+ * in the regexp code uses the pad ! */
+ PL_op = oop;
+ PL_curcop = ocurcop;
+ S_regcp_restore(aTHX_ rex, runops_cp, &maxopenparen);
+ PL_curpm = PL_reg_curpm;
+
+ if (logical != 2)
+ break;
+ }
+
+ /* only /(??{})/ from now on */
+ logical = 0;
+ {
+ /* extract RE object from returned value; compiling if
+ * necessary */
+
+ if (re_sv) {
+ re_sv = reg_temp_copy(NULL, re_sv);
+ }
+ else {
+ U32 pm_flags = 0;
+
+ if (SvUTF8(ret) && IN_BYTES) {
+ /* In use 'bytes': make a copy of the octet
+ * sequence, but without the flag on */
+ STRLEN len;
+ const char *const p = SvPV(ret, len);
+ ret = newSVpvn_flags(p, len, SVs_TEMP);
+ }
+ if (rex->intflags & PREGf_USE_RE_EVAL)
+ pm_flags |= PMf_USE_RE_EVAL;
+
+ /* if we got here, it should be an engine which
+ * supports compiling code blocks and stuff */
+ assert(rex->engine && rex->engine->op_comp);
+ assert(!(scan->flags & ~RXf_PMf_COMPILETIME));
+ re_sv = rex->engine->op_comp(aTHX_ &ret, 1, NULL,
+ rex->engine, NULL, NULL,
+ /* copy /msix etc to inner pattern */
+ scan->flags,
+ pm_flags);
+
+ if (!(SvFLAGS(ret)
+ & (SVs_TEMP | SVs_PADTMP | SVf_READONLY
+ | SVs_GMG))) {
+ /* This isn't a first class regexp. Instead, it's
+ caching a regexp onto an existing, Perl visible
+ scalar. */
+ sv_magic(ret, MUTABLE_SV(re_sv), PERL_MAGIC_qr, 0, 0);
+ }
+ /* safe to do now that any $1 etc has been
+ * interpolated into the new pattern string and
+ * compiled */
+ S_regcp_restore(aTHX_ rex, runops_cp, &maxopenparen);
+ }
+ SAVEFREESV(re_sv);
+ re = ReANY(re_sv);
+ }
+ RXp_MATCH_COPIED_off(re);
+ re->subbeg = rex->subbeg;
+ re->sublen = rex->sublen;
+ re->suboffset = rex->suboffset;
+ re->subcoffset = rex->subcoffset;
+ rei = RXi_GET(re);
+ DEBUG_EXECUTE_r(
+ debug_start_match(re_sv, utf8_target, locinput,
+ reginfo->strend, "Matching embedded");
+ );
+ startpoint = rei->program + 1;
+ ST.close_paren = 0; /* only used for GOSUB */
+
+ eval_recurse_doit: /* Share code with GOSUB below this line */
+ /* run the pattern returned from (??{...}) */
+
+ /* Save *all* the positions. */
+ ST.cp = regcppush(rex, 0, maxopenparen);
+ REGCP_SET(ST.lastcp);
+
+ re->lastparen = 0;
+ re->lastcloseparen = 0;
+
+ maxopenparen = 0;
+
+ /* invalidate the S-L poscache. We're now executing a
+ * different set of WHILEM ops (and their associated
+ * indexes) against the same string, so the bits in the
+ * cache are meaningless. Setting maxiter to zero forces
+ * the cache to be invalidated and zeroed before reuse.
+ * XXX This is too dramatic a measure. Ideally we should
+ * save the old cache and restore when running the outer
+ * pattern again */
+ reginfo->poscache_maxiter = 0;
+
+ is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(re_sv));
+
+ ST.prev_rex = rex_sv;
+ ST.prev_curlyx = cur_curlyx;
+ rex_sv = re_sv;
+ SET_reg_curpm(rex_sv);
+ rex = re;
+ rexi = rei;
+ cur_curlyx = NULL;
+ ST.B = next;
+ ST.prev_eval = cur_eval;
+ cur_eval = st;
+ /* now continue from first node in postoned RE */
+ PUSH_YES_STATE_GOTO(EVAL_AB, startpoint, locinput);
+ assert(0); /* NOTREACHED */
+ }
+
+ case EVAL_AB: /* cleanup after a successful (??{A})B */
+ /* note: this is called twice; first after popping B, then A */
+ rex_sv = ST.prev_rex;
+ is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
+ SET_reg_curpm(rex_sv);
+ rex = ReANY(rex_sv);
+ rexi = RXi_GET(rex);
+ regcpblow(ST.cp);
+ cur_eval = ST.prev_eval;
+ cur_curlyx = ST.prev_curlyx;
+
+ /* Invalidate cache. See "invalidate" comment above. */
+ reginfo->poscache_maxiter = 0;
+ if ( nochange_depth )
+ nochange_depth--;
+ sayYES;
+
+
+ case EVAL_AB_fail: /* unsuccessfully ran A or B in (??{A})B */
+ /* note: this is called twice; first after popping B, then A */
+ rex_sv = ST.prev_rex;
+ is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
+ SET_reg_curpm(rex_sv);
+ rex = ReANY(rex_sv);
+ rexi = RXi_GET(rex);
+
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex, &maxopenparen);
+ cur_eval = ST.prev_eval;
+ cur_curlyx = ST.prev_curlyx;
+ /* Invalidate cache. See "invalidate" comment above. */
+ reginfo->poscache_maxiter = 0;
+ if ( nochange_depth )
+ nochange_depth--;
+ sayNO_SILENT;
+#undef ST
+
+ case OPEN: /* ( */
+ n = ARG(scan); /* which paren pair */
+ rex->offs[n].start_tmp = locinput - reginfo->strbeg;
+ if (n > maxopenparen)
+ maxopenparen = n;
+ DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log,
+ "rex=0x%"UVxf" offs=0x%"UVxf": \\%"UVuf": set %"IVdf" tmp; maxopenparen=%"UVuf"\n",
+ PTR2UV(rex),
+ PTR2UV(rex->offs),
+ (UV)n,
+ (IV)rex->offs[n].start_tmp,
+ (UV)maxopenparen
+ ));
+ lastopen = n;
+ break;
+
+/* XXX really need to log other places start/end are set too */
+#define CLOSE_CAPTURE \
+ rex->offs[n].start = rex->offs[n].start_tmp; \
+ rex->offs[n].end = locinput - reginfo->strbeg; \
+ DEBUG_BUFFERS_r(PerlIO_printf(Perl_debug_log, \
+ "rex=0x%"UVxf" offs=0x%"UVxf": \\%"UVuf": set %"IVdf"..%"IVdf"\n", \
+ PTR2UV(rex), \
+ PTR2UV(rex->offs), \
+ (UV)n, \
+ (IV)rex->offs[n].start, \
+ (IV)rex->offs[n].end \
+ ))
+
+ case CLOSE: /* ) */
+ n = ARG(scan); /* which paren pair */
+ CLOSE_CAPTURE;
+ if (n > rex->lastparen)
+ rex->lastparen = n;
+ rex->lastcloseparen = n;
+ if (cur_eval && cur_eval->u.eval.close_paren == n) {
+ goto fake_end;
+ }
+ break;
+
+ case ACCEPT: /* (*ACCEPT) */
+ if (ARG(scan)){
+ regnode *cursor;
+ for (cursor=scan;
+ cursor && OP(cursor)!=END;
+ cursor=regnext(cursor))
+ {
+ if ( OP(cursor)==CLOSE ){
+ n = ARG(cursor);
+ if ( n <= lastopen ) {
+ CLOSE_CAPTURE;
+ if (n > rex->lastparen)
+ rex->lastparen = n;
+ rex->lastcloseparen = n;
+ if ( n == ARG(scan) || (cur_eval &&
+ cur_eval->u.eval.close_paren == n))
+ break;
+ }
+ }
+ }
+ }
+ goto fake_end;
+ /*NOTREACHED*/
+
+ case GROUPP: /* (?(1)) */
+ n = ARG(scan); /* which paren pair */
+ sw = cBOOL(rex->lastparen >= n && rex->offs[n].end != -1);
+ break;
+
+ case NGROUPP: /* (?(<name>)) */
+ /* reg_check_named_buff_matched returns 0 for no match */
+ sw = cBOOL(0 < reg_check_named_buff_matched(rex,scan));
+ break;
+
+ case INSUBP: /* (?(R)) */
+ n = ARG(scan);
+ sw = (cur_eval && (!n || cur_eval->u.eval.close_paren == n));
+ break;
+
+ case DEFINEP: /* (?(DEFINE)) */
+ sw = 0;
+ break;
+
+ case IFTHEN: /* (?(cond)A|B) */
+ reginfo->poscache_iter = reginfo->poscache_maxiter; /* Void cache */
+ if (sw)
+ next = NEXTOPER(NEXTOPER(scan));
+ else {
+ next = scan + ARG(scan);
+ if (OP(next) == IFTHEN) /* Fake one. */
+ next = NEXTOPER(NEXTOPER(next));
+ }
+ break;
+
+ case LOGICAL: /* modifier for EVAL and IFMATCH */
+ logical = scan->flags;
+ break;
+
+/*******************************************************************
+
+The CURLYX/WHILEM pair of ops handle the most generic case of the /A*B/
+pattern, where A and B are subpatterns. (For simple A, CURLYM or
+STAR/PLUS/CURLY/CURLYN are used instead.)
+
+A*B is compiled as <CURLYX><A><WHILEM><B>
+
+On entry to the subpattern, CURLYX is called. This pushes a CURLYX
+state, which contains the current count, initialised to -1. It also sets
+cur_curlyx to point to this state, with any previous value saved in the
+state block.
+
+CURLYX then jumps straight to the WHILEM op, rather than executing A,
+since the pattern may possibly match zero times (i.e. it's a while {} loop
+rather than a do {} while loop).
+
+Each entry to WHILEM represents a successful match of A. The count in the
+CURLYX block is incremented, another WHILEM state is pushed, and execution
+passes to A or B depending on greediness and the current count.
+
+For example, if matching against the string a1a2a3b (where the aN are
+substrings that match /A/), then the match progresses as follows: (the
+pushed states are interspersed with the bits of strings matched so far):
+
+ <CURLYX cnt=-1>
+ <CURLYX cnt=0><WHILEM>
+ <CURLYX cnt=1><WHILEM> a1 <WHILEM>
+ <CURLYX cnt=2><WHILEM> a1 <WHILEM> a2 <WHILEM>
+ <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM>
+ <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM> b
+
+(Contrast this with something like CURLYM, which maintains only a single
+backtrack state:
+
+ <CURLYM cnt=0> a1
+ a1 <CURLYM cnt=1> a2
+ a1 a2 <CURLYM cnt=2> a3
+ a1 a2 a3 <CURLYM cnt=3> b
+)
+
+Each WHILEM state block marks a point to backtrack to upon partial failure
+of A or B, and also contains some minor state data related to that
+iteration. The CURLYX block, pointed to by cur_curlyx, contains the
+overall state, such as the count, and pointers to the A and B ops.
+
+This is complicated slightly by nested CURLYX/WHILEM's. Since cur_curlyx
+must always point to the *current* CURLYX block, the rules are:
+
+When executing CURLYX, save the old cur_curlyx in the CURLYX state block,
+and set cur_curlyx to point the new block.
+
+When popping the CURLYX block after a successful or unsuccessful match,
+restore the previous cur_curlyx.
+
+When WHILEM is about to execute B, save the current cur_curlyx, and set it
+to the outer one saved in the CURLYX block.
+
+When popping the WHILEM block after a successful or unsuccessful B match,
+restore the previous cur_curlyx.
+
+Here's an example for the pattern (AI* BI)*BO
+I and O refer to inner and outer, C and W refer to CURLYX and WHILEM:
+
+cur_
+curlyx backtrack stack
+------ ---------------
+NULL
+CO <CO prev=NULL> <WO>
+CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
+CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
+NULL <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi <WO prev=CO> bo
+
+At this point the pattern succeeds, and we work back down the stack to
+clean up, restoring as we go:
+
+CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
+CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
+CO <CO prev=NULL> <WO>
+NULL
+
+*******************************************************************/
+
+#define ST st->u.curlyx
+
+ case CURLYX: /* start of /A*B/ (for complex A) */
+ {
+ /* No need to save/restore up to this paren */
+ I32 parenfloor = scan->flags;
+
+ assert(next); /* keep Coverity happy */
+ if (OP(PREVOPER(next)) == NOTHING) /* LONGJMP */
+ next += ARG(next);
+
+ /* XXXX Probably it is better to teach regpush to support
+ parenfloor > maxopenparen ... */
+ if (parenfloor > (I32)rex->lastparen)
+ parenfloor = rex->lastparen; /* Pessimization... */
+
+ ST.prev_curlyx= cur_curlyx;
+ cur_curlyx = st;
+ ST.cp = PL_savestack_ix;
+
+ /* these fields contain the state of the current curly.
+ * they are accessed by subsequent WHILEMs */
+ ST.parenfloor = parenfloor;
+ ST.me = scan;
+ ST.B = next;
+ ST.minmod = minmod;
+ minmod = 0;
+ ST.count = -1; /* this will be updated by WHILEM */
+ ST.lastloc = NULL; /* this will be updated by WHILEM */
+
+ PUSH_YES_STATE_GOTO(CURLYX_end, PREVOPER(next), locinput);
+ assert(0); /* NOTREACHED */
+ }
+
+ case CURLYX_end: /* just finished matching all of A*B */
+ cur_curlyx = ST.prev_curlyx;
+ sayYES;
+ assert(0); /* NOTREACHED */
+
+ case CURLYX_end_fail: /* just failed to match all of A*B */
+ regcpblow(ST.cp);
+ cur_curlyx = ST.prev_curlyx;
+ sayNO;
+ assert(0); /* NOTREACHED */
+
+
+#undef ST
+#define ST st->u.whilem
+
+ case WHILEM: /* just matched an A in /A*B/ (for complex A) */
+ {
+ /* see the discussion above about CURLYX/WHILEM */
+ I32 n;
+ int min = ARG1(cur_curlyx->u.curlyx.me);
+ int max = ARG2(cur_curlyx->u.curlyx.me);
+ regnode *A = NEXTOPER(cur_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS;
+
+ assert(cur_curlyx); /* keep Coverity happy */
+ n = ++cur_curlyx->u.curlyx.count; /* how many A's matched */
+ ST.save_lastloc = cur_curlyx->u.curlyx.lastloc;
+ ST.cache_offset = 0;
+ ST.cache_mask = 0;
+
+
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%*s whilem: matched %ld out of %d..%d\n",
+ REPORT_CODE_OFF+depth*2, "", (long)n, min, max)
+ );
+
+ /* First just match a string of min A's. */
+
+ if (n < min) {
+ ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
+ maxopenparen);
+ cur_curlyx->u.curlyx.lastloc = locinput;
+ REGCP_SET(ST.lastcp);
+
+ PUSH_STATE_GOTO(WHILEM_A_pre, A, locinput);
+ assert(0); /* NOTREACHED */
+ }
+
+ /* If degenerate A matches "", assume A done. */
+
+ if (locinput == cur_curlyx->u.curlyx.lastloc) {
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%*s whilem: empty match detected, trying continuation...\n",
+ REPORT_CODE_OFF+depth*2, "")
+ );
+ goto do_whilem_B_max;
+ }
+
+ /* super-linear cache processing.
+ *
+ * The idea here is that for certain types of CURLYX/WHILEM -
+ * principally those whose upper bound is infinity (and
+ * excluding regexes that have things like \1 and other very
+ * non-regular expresssiony things), then if a pattern like
+ * /....A*.../ fails and we backtrack to the WHILEM, then we
+ * make a note that this particular WHILEM op was at string
+ * position 47 (say) when the rest of pattern failed. Then, if
+ * we ever find ourselves back at that WHILEM, and at string
+ * position 47 again, we can just fail immediately rather than
+ * running the rest of the pattern again.
+ *
+ * This is very handy when patterns start to go
+ * 'super-linear', like in (a+)*(a+)*(a+)*, where you end up
+ * with a combinatorial explosion of backtracking.
+ *
+ * The cache is implemented as a bit array, with one bit per
+ * string byte position per WHILEM op (up to 16) - so its
+ * between 0.25 and 2x the string size.
+ *
+ * To avoid allocating a poscache buffer every time, we do an
+ * initially countdown; only after we have executed a WHILEM
+ * op (string-length x #WHILEMs) times do we allocate the
+ * cache.
+ *
+ * The top 4 bits of scan->flags byte say how many different
+ * relevant CURLLYX/WHILEM op pairs there are, while the
+ * bottom 4-bits is the identifying index number of this
+ * WHILEM.
+ */
+
+ if (scan->flags) {
+
+ if (!reginfo->poscache_maxiter) {
+ /* start the countdown: Postpone detection until we
+ * know the match is not *that* much linear. */
+ reginfo->poscache_maxiter
+ = (reginfo->strend - reginfo->strbeg + 1)
+ * (scan->flags>>4);
+ /* possible overflow for long strings and many CURLYX's */
+ if (reginfo->poscache_maxiter < 0)
+ reginfo->poscache_maxiter = I32_MAX;
+ reginfo->poscache_iter = reginfo->poscache_maxiter;
+ }
+
+ if (reginfo->poscache_iter-- == 0) {
+ /* initialise cache */
+ const I32 size = (reginfo->poscache_maxiter + 7)/8;
+ regmatch_info_aux *const aux = reginfo->info_aux;
+ if (aux->poscache) {
+ if ((I32)reginfo->poscache_size < size) {
+ Renew(aux->poscache, size, char);
+ reginfo->poscache_size = size;
+ }
+ Zero(aux->poscache, size, char);
+ }
+ else {
+ reginfo->poscache_size = size;
+ Newxz(aux->poscache, size, char);
+ }
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%swhilem: Detected a super-linear match, switching on caching%s...\n",
+ PL_colors[4], PL_colors[5])
+ );
+ }
+
+ if (reginfo->poscache_iter < 0) {
+ /* have we already failed at this position? */
+ I32 offset, mask;
+
+ reginfo->poscache_iter = -1; /* stop eventual underflow */
+ offset = (scan->flags & 0xf) - 1
+ + (locinput - reginfo->strbeg)
+ * (scan->flags>>4);
+ mask = 1 << (offset % 8);
+ offset /= 8;
+ if (reginfo->info_aux->poscache[offset] & mask) {
+ DEBUG_EXECUTE_r( PerlIO_printf(Perl_debug_log,
+ "%*s whilem: (cache) already tried at this position...\n",
+ REPORT_CODE_OFF+depth*2, "")
+ );
+ sayNO; /* cache records failure */
+ }
+ ST.cache_offset = offset;
+ ST.cache_mask = mask;
+ }
+ }
+
+ /* Prefer B over A for minimal matching. */
+
+ if (cur_curlyx->u.curlyx.minmod) {
+ ST.save_curlyx = cur_curlyx;
+ cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
+ ST.cp = regcppush(rex, ST.save_curlyx->u.curlyx.parenfloor,
+ maxopenparen);
+ REGCP_SET(ST.lastcp);
+ PUSH_YES_STATE_GOTO(WHILEM_B_min, ST.save_curlyx->u.curlyx.B,
+ locinput);
+ assert(0); /* NOTREACHED */
+ }
+
+ /* Prefer A over B for maximal matching. */
+
+ if (n < max) { /* More greed allowed? */
+ ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
+ maxopenparen);
+ cur_curlyx->u.curlyx.lastloc = locinput;
+ REGCP_SET(ST.lastcp);
+ PUSH_STATE_GOTO(WHILEM_A_max, A, locinput);
+ assert(0); /* NOTREACHED */
+ }
+ goto do_whilem_B_max;
+ }
+ assert(0); /* NOTREACHED */
+
+ case WHILEM_B_min: /* just matched B in a minimal match */
+ case WHILEM_B_max: /* just matched B in a maximal match */
+ cur_curlyx = ST.save_curlyx;
+ sayYES;
+ assert(0); /* NOTREACHED */
+
+ case WHILEM_B_max_fail: /* just failed to match B in a maximal match */
+ cur_curlyx = ST.save_curlyx;
+ cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
+ cur_curlyx->u.curlyx.count--;
+ CACHEsayNO;
+ assert(0); /* NOTREACHED */
+
+ case WHILEM_A_min_fail: /* just failed to match A in a minimal match */
+ /* FALL THROUGH */
+ case WHILEM_A_pre_fail: /* just failed to match even minimal A */
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex, &maxopenparen);
+ cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
+ cur_curlyx->u.curlyx.count--;
+ CACHEsayNO;
+ assert(0); /* NOTREACHED */
+
+ case WHILEM_A_max_fail: /* just failed to match A in a maximal match */
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex, &maxopenparen); /* Restore some previous $<digit>s? */
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "%*s whilem: failed, trying continuation...\n",
+ REPORT_CODE_OFF+depth*2, "")
+ );
+ do_whilem_B_max:
+ if (cur_curlyx->u.curlyx.count >= REG_INFTY
+ && ckWARN(WARN_REGEXP)
+ && !reginfo->warned)
+ {
+ reginfo->warned = TRUE;
+ Perl_warner(aTHX_ packWARN(WARN_REGEXP),
+ "Complex regular subexpression recursion limit (%d) "
+ "exceeded",
+ REG_INFTY - 1);
+ }
+
+ /* now try B */
+ ST.save_curlyx = cur_curlyx;
+ cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
+ PUSH_YES_STATE_GOTO(WHILEM_B_max, ST.save_curlyx->u.curlyx.B,
+ locinput);
+ assert(0); /* NOTREACHED */
+
+ case WHILEM_B_min_fail: /* just failed to match B in a minimal match */
+ cur_curlyx = ST.save_curlyx;
+ REGCP_UNWIND(ST.lastcp);
+ regcppop(rex, &maxopenparen);
+
+ if (cur_curlyx->u.curlyx.count >= /*max*/ARG2(cur_curlyx->u.curlyx.me)) {
+ /* Maximum greed exceeded */
+ if (cur_curlyx->u.curlyx.count >= REG_INFTY
+ && ckWARN(WARN_REGEXP)
+ && !reginfo->warned)
+ {
+ reginfo->warned = TRUE;
+ Perl_warner(aTHX_ packWARN(WARN_REGEXP),
+ "Complex regular subexpression recursion "
+ "limit (%d) exceeded",
+ REG_INFTY - 1);
+ }
+ cur_curlyx->u.curlyx.count--;
+ CACHEsayNO;
+ }
+
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "%*s trying longer...\n", REPORT_CODE_OFF+depth*2, "")
+ );
+ /* Try grabbing another A and see if it helps. */
+ cur_curlyx->u.curlyx.lastloc = locinput;
+ ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
+ maxopenparen);
+ REGCP_SET(ST.lastcp);
+ PUSH_STATE_GOTO(WHILEM_A_min,
+ /*A*/ NEXTOPER(ST.save_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS,
+ locinput);
+ assert(0); /* NOTREACHED */
+
+#undef ST
+#define ST st->u.branch
+
+ case BRANCHJ: /* /(...|A|...)/ with long next pointer */
+ next = scan + ARG(scan);
+ if (next == scan)
+ next = NULL;
+ scan = NEXTOPER(scan);
+ /* FALL THROUGH */
+
+ case BRANCH: /* /(...|A|...)/ */
+ scan = NEXTOPER(scan); /* scan now points to inner node */
+ ST.lastparen = rex->lastparen;
+ ST.lastcloseparen = rex->lastcloseparen;
+ ST.next_branch = next;
+ REGCP_SET(ST.cp);
+
+ /* Now go into the branch */
+ if (has_cutgroup) {
+ PUSH_YES_STATE_GOTO(BRANCH_next, scan, locinput);
+ } else {
+ PUSH_STATE_GOTO(BRANCH_next, scan, locinput);
+ }
+ assert(0); /* NOTREACHED */
+
+ case CUTGROUP: /* /(*THEN)/ */
+ sv_yes_mark = st->u.mark.mark_name = scan->flags ? NULL :
+ MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ PUSH_STATE_GOTO(CUTGROUP_next, next, locinput);
+ assert(0); /* NOTREACHED */
+
+ case CUTGROUP_next_fail:
+ do_cutgroup = 1;
+ no_final = 1;
+ if (st->u.mark.mark_name)
+ sv_commit = st->u.mark.mark_name;
+ sayNO;
+ assert(0); /* NOTREACHED */
+
+ case BRANCH_next:
+ sayYES;
+ assert(0); /* NOTREACHED */
+
+ case BRANCH_next_fail: /* that branch failed; try the next, if any */
+ if (do_cutgroup) {
+ do_cutgroup = 0;
+ no_final = 0;
+ }
+ REGCP_UNWIND(ST.cp);
+ UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
+ scan = ST.next_branch;
+ /* no more branches? */
+ if (!scan || (OP(scan) != BRANCH && OP(scan) != BRANCHJ)) {
+ DEBUG_EXECUTE_r({
+ PerlIO_printf( Perl_debug_log,
+ "%*s %sBRANCH failed...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4],
+ PL_colors[5] );
+ });
+ sayNO_SILENT;
+ }
+ continue; /* execute next BRANCH[J] op */
+ assert(0); /* NOTREACHED */
+
+ case MINMOD: /* next op will be non-greedy, e.g. A*? */
+ minmod = 1;
+ break;
+
+#undef ST
+#define ST st->u.curlym
+
+ case CURLYM: /* /A{m,n}B/ where A is fixed-length */
+
+ /* This is an optimisation of CURLYX that enables us to push
+ * only a single backtracking state, no matter how many matches
+ * there are in {m,n}. It relies on the pattern being constant
+ * length, with no parens to influence future backrefs
+ */
+
+ ST.me = scan;
+ scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
+
+ ST.lastparen = rex->lastparen;
+ ST.lastcloseparen = rex->lastcloseparen;
+
+ /* if paren positive, emulate an OPEN/CLOSE around A */
+ if (ST.me->flags) {
+ U32 paren = ST.me->flags;
+ if (paren > maxopenparen)
+ maxopenparen = paren;
+ scan += NEXT_OFF(scan); /* Skip former OPEN. */
+ }
+ ST.A = scan;
+ ST.B = next;
+ ST.alen = 0;
+ ST.count = 0;
+ ST.minmod = minmod;
+ minmod = 0;
+ ST.c1 = CHRTEST_UNINIT;
+ REGCP_SET(ST.cp);
+
+ if (!(ST.minmod ? ARG1(ST.me) : ARG2(ST.me))) /* min/max */
+ goto curlym_do_B;
+
+ curlym_do_A: /* execute the A in /A{m,n}B/ */
+ PUSH_YES_STATE_GOTO(CURLYM_A, ST.A, locinput); /* match A */
+ assert(0); /* NOTREACHED */
+
+ case CURLYM_A: /* we've just matched an A */
+ ST.count++;
+ /* after first match, determine A's length: u.curlym.alen */
+ if (ST.count == 1) {
+ if (reginfo->is_utf8_target) {
+ char *s = st->locinput;
+ while (s < locinput) {
+ ST.alen++;
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ ST.alen = locinput - st->locinput;
+ }
+ if (ST.alen == 0)
+ ST.count = ST.minmod ? ARG1(ST.me) : ARG2(ST.me);
+ }
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM now matched %"IVdf" times, len=%"IVdf"...\n",
+ (int)(REPORT_CODE_OFF+(depth*2)), "",
+ (IV) ST.count, (IV)ST.alen)
+ );
+
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.me->flags)
+ goto fake_end;
+
+ {
+ I32 max = (ST.minmod ? ARG1(ST.me) : ARG2(ST.me));
+ if ( max == REG_INFTY || ST.count < max )
+ goto curlym_do_A; /* try to match another A */
+ }
+ goto curlym_do_B; /* try to match B */
+
+ case CURLYM_A_fail: /* just failed to match an A */
+ REGCP_UNWIND(ST.cp);
+
+ if (ST.minmod || ST.count < ARG1(ST.me) /* min*/
+ || (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.me->flags))
+ sayNO;
+
+ curlym_do_B: /* execute the B in /A{m,n}B/ */
+ if (ST.c1 == CHRTEST_UNINIT) {
+ /* calculate c1 and c2 for possible match of 1st char
+ * following curly */
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ if (HAS_TEXT(ST.B) || JUMPABLE(ST.B)) {
+ regnode *text_node = ST.B;
+ if (! HAS_TEXT(text_node))
+ FIND_NEXT_IMPT(text_node);
+ /* this used to be
+
+ (HAS_TEXT(text_node) && PL_regkind[OP(text_node)] == EXACT)
+
+ But the former is redundant in light of the latter.
+
+ if this changes back then the macro for
+ IS_TEXT and friends need to change.
+ */
+ if (PL_regkind[OP(text_node)] == EXACT) {
+ if (! S_setup_EXACTISH_ST_c1_c2(aTHX_
+ text_node, &ST.c1, ST.c1_utf8, &ST.c2, ST.c2_utf8,
+ reginfo))
+ {
+ sayNO;
+ }
+ }
+ }
+ }
+
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM trying tail with matches=%"IVdf"...\n",
+ (int)(REPORT_CODE_OFF+(depth*2)),
+ "", (IV)ST.count)
+ );
+ if (! NEXTCHR_IS_EOS && ST.c1 != CHRTEST_VOID) {
+ if (! UTF8_IS_INVARIANT(nextchr) && utf8_target) {
+ if (memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput))
+ && memNE(locinput, ST.c2_utf8, UTF8SKIP(locinput)))
+ {
+ /* simulate B failing */
+ DEBUG_OPTIMISE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM Fast bail next target=U+%"UVXf" c1=U+%"UVXf" c2=U+%"UVXf"\n",
+ (int)(REPORT_CODE_OFF+(depth*2)),"",
+ valid_utf8_to_uvchr((U8 *) locinput, NULL),
+ valid_utf8_to_uvchr(ST.c1_utf8, NULL),
+ valid_utf8_to_uvchr(ST.c2_utf8, NULL))
+ );
+ state_num = CURLYM_B_fail;
+ goto reenter_switch;
+ }
+ }
+ else if (nextchr != ST.c1 && nextchr != ST.c2) {
+ /* simulate B failing */
+ DEBUG_OPTIMISE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM Fast bail next target=U+%X c1=U+%X c2=U+%X\n",
+ (int)(REPORT_CODE_OFF+(depth*2)),"",
+ (int) nextchr, ST.c1, ST.c2)
+ );
+ state_num = CURLYM_B_fail;
+ goto reenter_switch;
+ }
+ }
+
+ if (ST.me->flags) {
+ /* emulate CLOSE: mark current A as captured */
+ I32 paren = ST.me->flags;
+ if (ST.count) {
+ rex->offs[paren].start
+ = HOPc(locinput, -ST.alen) - reginfo->strbeg;
+ rex->offs[paren].end = locinput - reginfo->strbeg;
+ if ((U32)paren > rex->lastparen)
+ rex->lastparen = paren;
+ rex->lastcloseparen = paren;
+ }
+ else
+ rex->offs[paren].end = -1;
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.me->flags)
+ {
+ if (ST.count)
+ goto fake_end;
+ else
+ sayNO;
+ }
+ }
+
+ PUSH_STATE_GOTO(CURLYM_B, ST.B, locinput); /* match B */
+ assert(0); /* NOTREACHED */
+
+ case CURLYM_B_fail: /* just failed to match a B */
+ REGCP_UNWIND(ST.cp);
+ UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
+ if (ST.minmod) {
+ I32 max = ARG2(ST.me);
+ if (max != REG_INFTY && ST.count == max)
+ sayNO;
+ goto curlym_do_A; /* try to match a further A */
+ }
+ /* backtrack one A */
+ if (ST.count == ARG1(ST.me) /* min */)
+ sayNO;
+ ST.count--;
+ SET_locinput(HOPc(locinput, -ST.alen));
+ goto curlym_do_B; /* try to match B */
+
+#undef ST
+#define ST st->u.curly
+
+#define CURLY_SETPAREN(paren, success) \
+ if (paren) { \
+ if (success) { \
+ rex->offs[paren].start = HOPc(locinput, -1) - reginfo->strbeg; \
+ rex->offs[paren].end = locinput - reginfo->strbeg; \
+ if (paren > rex->lastparen) \
+ rex->lastparen = paren; \
+ rex->lastcloseparen = paren; \
+ } \
+ else { \
+ rex->offs[paren].end = -1; \
+ rex->lastparen = ST.lastparen; \
+ rex->lastcloseparen = ST.lastcloseparen; \
+ } \
+ }
+
+ case STAR: /* /A*B/ where A is width 1 char */
+ ST.paren = 0;
+ ST.min = 0;
+ ST.max = REG_INFTY;
+ scan = NEXTOPER(scan);
+ goto repeat;
+
+ case PLUS: /* /A+B/ where A is width 1 char */
+ ST.paren = 0;
+ ST.min = 1;
+ ST.max = REG_INFTY;
+ scan = NEXTOPER(scan);
+ goto repeat;
+
+ case CURLYN: /* /(A){m,n}B/ where A is width 1 char */
+ ST.paren = scan->flags; /* Which paren to set */
+ ST.lastparen = rex->lastparen;
+ ST.lastcloseparen = rex->lastcloseparen;
+ if (ST.paren > maxopenparen)
+ maxopenparen = ST.paren;
+ ST.min = ARG1(scan); /* min to match */
+ ST.max = ARG2(scan); /* max to match */
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ ST.min=1;
+ ST.max=1;
+ }
+ scan = regnext(NEXTOPER(scan) + NODE_STEP_REGNODE);
+ goto repeat;
+
+ case CURLY: /* /A{m,n}B/ where A is width 1 char */
+ ST.paren = 0;
+ ST.min = ARG1(scan); /* min to match */
+ ST.max = ARG2(scan); /* max to match */
+ scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
+ repeat:
+ /*
+ * Lookahead to avoid useless match attempts
+ * when we know what character comes next.
+ *
+ * Used to only do .*x and .*?x, but now it allows
+ * for )'s, ('s and (?{ ... })'s to be in the way
+ * of the quantifier and the EXACT-like node. -- japhy
+ */
+
+ assert(ST.min <= ST.max);
+ if (! HAS_TEXT(next) && ! JUMPABLE(next)) {
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ }
+ else {
+ regnode *text_node = next;
+
+ if (! HAS_TEXT(text_node))
+ FIND_NEXT_IMPT(text_node);
+
+ if (! HAS_TEXT(text_node))
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ else {
+ if ( PL_regkind[OP(text_node)] != EXACT ) {
+ ST.c1 = ST.c2 = CHRTEST_VOID;
+ }
+ else {
+
+ /* Currently we only get here when
+
+ PL_rekind[OP(text_node)] == EXACT
+
+ if this changes back then the macro for IS_TEXT and
+ friends need to change. */
+ if (! S_setup_EXACTISH_ST_c1_c2(aTHX_
+ text_node, &ST.c1, ST.c1_utf8, &ST.c2, ST.c2_utf8,
+ reginfo))
+ {
+ sayNO;
+ }
+ }
+ }
+ }
+
+ ST.A = scan;
+ ST.B = next;
+ if (minmod) {
+ char *li = locinput;
+ minmod = 0;
+ if (ST.min &&
+ regrepeat(rex, &li, ST.A, reginfo, ST.min, depth)
+ < ST.min)
+ sayNO;
+ SET_locinput(li);
+ ST.count = ST.min;
+ REGCP_SET(ST.cp);
+ if (ST.c1 == CHRTEST_VOID)
+ goto curly_try_B_min;
+
+ ST.oldloc = locinput;
+
+ /* set ST.maxpos to the furthest point along the
+ * string that could possibly match */
+ if (ST.max == REG_INFTY) {
+ ST.maxpos = reginfo->strend - 1;
+ if (utf8_target)
+ while (UTF8_IS_CONTINUATION(*(U8*)ST.maxpos))
+ ST.maxpos--;
+ }
+ else if (utf8_target) {
+ int m = ST.max - ST.min;
+ for (ST.maxpos = locinput;
+ m >0 && ST.maxpos < reginfo->strend; m--)
+ ST.maxpos += UTF8SKIP(ST.maxpos);
+ }
+ else {
+ ST.maxpos = locinput + ST.max - ST.min;
+ if (ST.maxpos >= reginfo->strend)
+ ST.maxpos = reginfo->strend - 1;
+ }
+ goto curly_try_B_min_known;
+
+ }
+ else {
+ /* avoid taking address of locinput, so it can remain
+ * a register var */
+ char *li = locinput;
+ ST.count = regrepeat(rex, &li, ST.A, reginfo, ST.max, depth);
+ if (ST.count < ST.min)
+ sayNO;
+ SET_locinput(li);
+ if ((ST.count > ST.min)
+ && (PL_regkind[OP(ST.B)] == EOL) && (OP(ST.B) != MEOL))
+ {
+ /* A{m,n} must come at the end of the string, there's
+ * no point in backing off ... */
+ ST.min = ST.count;
+ /* ...except that $ and \Z can match before *and* after
+ newline at the end. Consider "\n\n" =~ /\n+\Z\n/.
+ We may back off by one in this case. */
+ if (UCHARAT(locinput - 1) == '\n' && OP(ST.B) != EOS)
+ ST.min--;
+ }
+ REGCP_SET(ST.cp);
+ goto curly_try_B_max;
+ }
+ assert(0); /* NOTREACHED */
+
+
+ case CURLY_B_min_known_fail:
+ /* failed to find B in a non-greedy match where c1,c2 valid */
+
+ REGCP_UNWIND(ST.cp);
+ if (ST.paren) {
+ UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
+ }
+ /* Couldn't or didn't -- move forward. */
+ ST.oldloc = locinput;
+ if (utf8_target)
+ locinput += UTF8SKIP(locinput);
+ else
+ locinput++;
+ ST.count++;
+ curly_try_B_min_known:
+ /* find the next place where 'B' could work, then call B */
+ {
+ int n;
+ if (utf8_target) {
+ n = (ST.oldloc == locinput) ? 0 : 1;
+ if (ST.c1 == ST.c2) {
+ /* set n to utf8_distance(oldloc, locinput) */
+ while (locinput <= ST.maxpos
+ && memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput)))
+ {
+ locinput += UTF8SKIP(locinput);
+ n++;
+ }
+ }
+ else {
+ /* set n to utf8_distance(oldloc, locinput) */
+ while (locinput <= ST.maxpos
+ && memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput))
+ && memNE(locinput, ST.c2_utf8, UTF8SKIP(locinput)))
+ {
+ locinput += UTF8SKIP(locinput);
+ n++;
+ }
+ }
+ }
+ else { /* Not utf8_target */
+ if (ST.c1 == ST.c2) {
+ while (locinput <= ST.maxpos &&
+ UCHARAT(locinput) != ST.c1)
+ locinput++;
+ }
+ else {
+ while (locinput <= ST.maxpos
+ && UCHARAT(locinput) != ST.c1
+ && UCHARAT(locinput) != ST.c2)
+ locinput++;
+ }
+ n = locinput - ST.oldloc;
+ }
+ if (locinput > ST.maxpos)
+ sayNO;
+ if (n) {
+ /* In /a{m,n}b/, ST.oldloc is at "a" x m, locinput is
+ * at b; check that everything between oldloc and
+ * locinput matches */
+ char *li = ST.oldloc;
+ ST.count += n;
+ if (regrepeat(rex, &li, ST.A, reginfo, n, depth) < n)
+ sayNO;
+ assert(n == REG_INFTY || locinput == li);
+ }
+ CURLY_SETPAREN(ST.paren, ST.count);
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ goto fake_end;
+ }
+ PUSH_STATE_GOTO(CURLY_B_min_known, ST.B, locinput);
+ }
+ assert(0); /* NOTREACHED */
+
+
+ case CURLY_B_min_fail:
+ /* failed to find B in a non-greedy match where c1,c2 invalid */
+
+ REGCP_UNWIND(ST.cp);
+ if (ST.paren) {
+ UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
+ }
+ /* failed -- move forward one */
+ {
+ char *li = locinput;
+ if (!regrepeat(rex, &li, ST.A, reginfo, 1, depth)) {
+ sayNO;
+ }
+ locinput = li;
+ }
+ {
+ ST.count++;
+ if (ST.count <= ST.max || (ST.max == REG_INFTY &&
+ ST.count > 0)) /* count overflow ? */
+ {
+ curly_try_B_min:
+ CURLY_SETPAREN(ST.paren, ST.count);
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ goto fake_end;
+ }
+ PUSH_STATE_GOTO(CURLY_B_min, ST.B, locinput);
+ }
+ }
+ sayNO;
+ assert(0); /* NOTREACHED */
+
+
+ curly_try_B_max:
+ /* a successful greedy match: now try to match B */
+ if (cur_eval && cur_eval->u.eval.close_paren &&
+ cur_eval->u.eval.close_paren == (U32)ST.paren) {
+ goto fake_end;
+ }
+ {
+ bool could_match = locinput < reginfo->strend;
+
+ /* If it could work, try it. */
+ if (ST.c1 != CHRTEST_VOID && could_match) {
+ if (! UTF8_IS_INVARIANT(UCHARAT(locinput)) && utf8_target)
+ {
+ could_match = memEQ(locinput,
+ ST.c1_utf8,
+ UTF8SKIP(locinput))
+ || memEQ(locinput,
+ ST.c2_utf8,
+ UTF8SKIP(locinput));
+ }
+ else {
+ could_match = UCHARAT(locinput) == ST.c1
+ || UCHARAT(locinput) == ST.c2;
+ }
+ }
+ if (ST.c1 == CHRTEST_VOID || could_match) {
+ CURLY_SETPAREN(ST.paren, ST.count);
+ PUSH_STATE_GOTO(CURLY_B_max, ST.B, locinput);
+ assert(0); /* NOTREACHED */
+ }
+ }
+ /* FALL THROUGH */
+
+ case CURLY_B_max_fail:
+ /* failed to find B in a greedy match */
+
+ REGCP_UNWIND(ST.cp);
+ if (ST.paren) {
+ UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
+ }
+ /* back up. */
+ if (--ST.count < ST.min)
+ sayNO;
+ locinput = HOPc(locinput, -1);
+ goto curly_try_B_max;
+
+#undef ST
+
+ case END: /* last op of main pattern */
+ fake_end:
+ if (cur_eval) {
+ /* we've just finished A in /(??{A})B/; now continue with B */
+
+ st->u.eval.prev_rex = rex_sv; /* inner */
+
+ /* Save *all* the positions. */
+ st->u.eval.cp = regcppush(rex, 0, maxopenparen);
+ rex_sv = cur_eval->u.eval.prev_rex;
+ is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
+ SET_reg_curpm(rex_sv);
+ rex = ReANY(rex_sv);
+ rexi = RXi_GET(rex);
+ cur_curlyx = cur_eval->u.eval.prev_curlyx;
+
+ REGCP_SET(st->u.eval.lastcp);
+
+ /* Restore parens of the outer rex without popping the
+ * savestack */
+ S_regcp_restore(aTHX_ rex, cur_eval->u.eval.lastcp,
+ &maxopenparen);
+
+ st->u.eval.prev_eval = cur_eval;
+ cur_eval = cur_eval->u.eval.prev_eval;
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log, "%*s EVAL trying tail ... %"UVxf"\n",
+ REPORT_CODE_OFF+depth*2, "",PTR2UV(cur_eval)););
+ if ( nochange_depth )
+ nochange_depth--;
+
+ PUSH_YES_STATE_GOTO(EVAL_AB, st->u.eval.prev_eval->u.eval.B,
+ locinput); /* match B */
+ }
+
+ if (locinput < reginfo->till) {
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log,
+ "%sMatch possible, but length=%ld is smaller than requested=%ld, failing!%s\n",
+ PL_colors[4],
+ (long)(locinput - startpos),
+ (long)(reginfo->till - startpos),
+ PL_colors[5]));
+
+ sayNO_SILENT; /* Cannot match: too short. */
+ }
+ sayYES; /* Success! */
+
+ case SUCCEED: /* successful SUSPEND/UNLESSM/IFMATCH/CURLYM */
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %ssubpattern success...%s\n",
+ REPORT_CODE_OFF+depth*2, "", PL_colors[4], PL_colors[5]));
+ sayYES; /* Success! */
+
+#undef ST
+#define ST st->u.ifmatch
+
+ {
+ char *newstart;
+
+ case SUSPEND: /* (?>A) */
+ ST.wanted = 1;
+ newstart = locinput;
+ goto do_ifmatch;
+
+ case UNLESSM: /* -ve lookaround: (?!A), or with flags, (?<!A) */
+ ST.wanted = 0;
+ goto ifmatch_trivial_fail_test;
+
+ case IFMATCH: /* +ve lookaround: (?=A), or with flags, (?<=A) */
+ ST.wanted = 1;
+ ifmatch_trivial_fail_test:
+ if (scan->flags) {
+ char * const s = HOPBACKc(locinput, scan->flags);
+ if (!s) {
+ /* trivial fail */
+ if (logical) {
+ logical = 0;
+ sw = 1 - cBOOL(ST.wanted);
+ }
+ else if (ST.wanted)
+ sayNO;
+ next = scan + ARG(scan);
+ if (next == scan)
+ next = NULL;
+ break;
+ }
+ newstart = s;
+ }
+ else
+ newstart = locinput;
+
+ do_ifmatch:
+ ST.me = scan;
+ ST.logical = logical;
+ logical = 0; /* XXX: reset state of logical once it has been saved into ST */
+
+ /* execute body of (?...A) */
+ PUSH_YES_STATE_GOTO(IFMATCH_A, NEXTOPER(NEXTOPER(scan)), newstart);
+ assert(0); /* NOTREACHED */
+ }
+
+ case IFMATCH_A_fail: /* body of (?...A) failed */
+ ST.wanted = !ST.wanted;
+ /* FALL THROUGH */
+
+ case IFMATCH_A: /* body of (?...A) succeeded */
+ if (ST.logical) {
+ sw = cBOOL(ST.wanted);
+ }
+ else if (!ST.wanted)
+ sayNO;
+
+ if (OP(ST.me) != SUSPEND) {
+ /* restore old position except for (?>...) */
+ locinput = st->locinput;
+ }
+ scan = ST.me + ARG(ST.me);
+ if (scan == ST.me)
+ scan = NULL;
+ continue; /* execute B */
+
+#undef ST
+
+ case LONGJMP: /* alternative with many branches compiles to
+ * (BRANCHJ; EXACT ...; LONGJMP ) x N */
+ next = scan + ARG(scan);
+ if (next == scan)
+ next = NULL;
+ break;
+
+ case COMMIT: /* (*COMMIT) */
+ reginfo->cutpoint = reginfo->strend;
+ /* FALLTHROUGH */
+
+ case PRUNE: /* (*PRUNE) */
+ if (!scan->flags)
+ sv_yes_mark = sv_commit = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ PUSH_STATE_GOTO(COMMIT_next, next, locinput);
+ assert(0); /* NOTREACHED */
+
+ case COMMIT_next_fail:
+ no_final = 1;
+ /* FALLTHROUGH */
+
+ case OPFAIL: /* (*FAIL) */
+ sayNO;
+ assert(0); /* NOTREACHED */
+
+#define ST st->u.mark
+ case MARKPOINT: /* (*MARK:foo) */
+ ST.prev_mark = mark_state;
+ ST.mark_name = sv_commit = sv_yes_mark
+ = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+ mark_state = st;
+ ST.mark_loc = locinput;
+ PUSH_YES_STATE_GOTO(MARKPOINT_next, next, locinput);
+ assert(0); /* NOTREACHED */
+
+ case MARKPOINT_next:
+ mark_state = ST.prev_mark;
+ sayYES;
+ assert(0); /* NOTREACHED */
+
+ case MARKPOINT_next_fail:
+ if (popmark && sv_eq(ST.mark_name,popmark))
+ {
+ if (ST.mark_loc > startpoint)
+ reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
+ popmark = NULL; /* we found our mark */
+ sv_commit = ST.mark_name;
+
+ DEBUG_EXECUTE_r({
+ PerlIO_printf(Perl_debug_log,
+ "%*s %ssetting cutpoint to mark:%"SVf"...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4], SVfARG(sv_commit), PL_colors[5]);
+ });
+ }
+ mark_state = ST.prev_mark;
+ sv_yes_mark = mark_state ?
+ mark_state->u.mark.mark_name : NULL;
+ sayNO;
+ assert(0); /* NOTREACHED */
+
+ case SKIP: /* (*SKIP) */
+ if (scan->flags) {
+ /* (*SKIP) : if we fail we cut here*/
+ ST.mark_name = NULL;
+ ST.mark_loc = locinput;
+ PUSH_STATE_GOTO(SKIP_next,next, locinput);
+ } else {
+ /* (*SKIP:NAME) : if there is a (*MARK:NAME) fail where it was,
+ otherwise do nothing. Meaning we need to scan
+ */
+ regmatch_state *cur = mark_state;
+ SV *find = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
+
+ while (cur) {
+ if ( sv_eq( cur->u.mark.mark_name,
+ find ) )
+ {
+ ST.mark_name = find;
+ PUSH_STATE_GOTO( SKIP_next, next, locinput);
+ }
+ cur = cur->u.mark.prev_mark;
+ }
+ }
+ /* Didn't find our (*MARK:NAME) so ignore this (*SKIP:NAME) */
+ break;
+
+ case SKIP_next_fail:
+ if (ST.mark_name) {
+ /* (*CUT:NAME) - Set up to search for the name as we
+ collapse the stack*/
+ popmark = ST.mark_name;
+ } else {
+ /* (*CUT) - No name, we cut here.*/
+ if (ST.mark_loc > startpoint)
+ reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
+ /* but we set sv_commit to latest mark_name if there
+ is one so they can test to see how things lead to this
+ cut */
+ if (mark_state)
+ sv_commit=mark_state->u.mark.mark_name;
+ }
+ no_final = 1;
+ sayNO;
+ assert(0); /* NOTREACHED */
+#undef ST
+
+ case LNBREAK: /* \R */
+ if ((n=is_LNBREAK_safe(locinput, reginfo->strend, utf8_target))) {
+ locinput += n;
+ } else
+ sayNO;
+ break;
+
+ default:
+ PerlIO_printf(Perl_error_log, "%"UVxf" %d\n",
+ PTR2UV(scan), OP(scan));
+ Perl_croak(aTHX_ "regexp memory corruption");
+
+ /* this is a point to jump to in order to increment
+ * locinput by one character */
+ increment_locinput:
+ assert(!NEXTCHR_IS_EOS);
+ if (utf8_target) {
+ locinput += PL_utf8skip[nextchr];
+ /* locinput is allowed to go 1 char off the end, but not 2+ */
+ if (locinput > reginfo->strend)
+ sayNO;
+ }
+ else
+ locinput++;
+ break;
+
+ } /* end switch */
+
+ /* switch break jumps here */
+ scan = next; /* prepare to execute the next op and ... */
+ continue; /* ... jump back to the top, reusing st */
+ assert(0); /* NOTREACHED */
+
+ push_yes_state:
+ /* push a state that backtracks on success */
+ st->u.yes.prev_yes_state = yes_state;
+ yes_state = st;
+ /* FALL THROUGH */
+ push_state:
+ /* push a new regex state, then continue at scan */
+ {
+ regmatch_state *newst;
+
+ DEBUG_STACK_r({
+ regmatch_state *cur = st;
+ regmatch_state *curyes = yes_state;
+ int curd = depth;
+ regmatch_slab *slab = PL_regmatch_slab;
+ for (;curd > -1;cur--,curd--) {
+ if (cur < SLAB_FIRST(slab)) {
+ slab = slab->prev;
+ cur = SLAB_LAST(slab);
+ }
+ PerlIO_printf(Perl_error_log, "%*s#%-3d %-10s %s\n",
+ REPORT_CODE_OFF + 2 + depth * 2,"",
+ curd, PL_reg_name[cur->resume_state],
+ (curyes == cur) ? "yes" : ""
+ );
+ if (curyes == cur)
+ curyes = cur->u.yes.prev_yes_state;
+ }
+ } else
+ DEBUG_STATE_pp("push")
+ );
+ depth++;
+ st->locinput = locinput;
+ newst = st+1;
+ if (newst > SLAB_LAST(PL_regmatch_slab))
+ newst = S_push_slab(aTHX);
+ PL_regmatch_state = newst;
+
+ locinput = pushinput;
+ st = newst;
+ continue;
+ assert(0); /* NOTREACHED */
+ }
+ }
+
+ /*
+ * We get here only if there's trouble -- normally "case END" is
+ * the terminating point.
+ */
+ Perl_croak(aTHX_ "corrupted regexp pointers");
+ /*NOTREACHED*/
+ sayNO;
+
+yes:
+ if (yes_state) {
+ /* we have successfully completed a subexpression, but we must now
+ * pop to the state marked by yes_state and continue from there */
+ assert(st != yes_state);
+#ifdef DEBUGGING
+ while (st != yes_state) {
+ st--;
+ if (st < SLAB_FIRST(PL_regmatch_slab)) {
+ PL_regmatch_slab = PL_regmatch_slab->prev;
+ st = SLAB_LAST(PL_regmatch_slab);
+ }
+ DEBUG_STATE_r({
+ if (no_final) {
+ DEBUG_STATE_pp("pop (no final)");
+ } else {
+ DEBUG_STATE_pp("pop (yes)");
+ }
+ });
+ depth--;
+ }
+#else
+ while (yes_state < SLAB_FIRST(PL_regmatch_slab)
+ || yes_state > SLAB_LAST(PL_regmatch_slab))
+ {
+ /* not in this slab, pop slab */
+ depth -= (st - SLAB_FIRST(PL_regmatch_slab) + 1);
+ PL_regmatch_slab = PL_regmatch_slab->prev;
+ st = SLAB_LAST(PL_regmatch_slab);
+ }
+ depth -= (st - yes_state);
+#endif
+ st = yes_state;
+ yes_state = st->u.yes.prev_yes_state;
+ PL_regmatch_state = st;
+
+ if (no_final)
+ locinput= st->locinput;
+ state_num = st->resume_state + no_final;
+ goto reenter_switch;
+ }
+
+ DEBUG_EXECUTE_r(PerlIO_printf(Perl_debug_log, "%sMatch successful!%s\n",
+ PL_colors[4], PL_colors[5]));
+
+ if (reginfo->info_aux_eval) {
+ /* each successfully executed (?{...}) block does the equivalent of
+ * local $^R = do {...}
+ * When popping the save stack, all these locals would be undone;
+ * bypass this by setting the outermost saved $^R to the latest
+ * value */
+ if (oreplsv != GvSV(PL_replgv))
+ sv_setsv(oreplsv, GvSV(PL_replgv));
+ }
+ result = 1;
+ goto final_exit;
+
+no:
+ DEBUG_EXECUTE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s %sfailed...%s\n",
+ REPORT_CODE_OFF+depth*2, "",
+ PL_colors[4], PL_colors[5])
+ );
+
+no_silent:
+ if (no_final) {
+ if (yes_state) {
+ goto yes;
+ } else {
+ goto final_exit;
+ }
+ }
+ if (depth) {
+ /* there's a previous state to backtrack to */
+ st--;
+ if (st < SLAB_FIRST(PL_regmatch_slab)) {
+ PL_regmatch_slab = PL_regmatch_slab->prev;
+ st = SLAB_LAST(PL_regmatch_slab);
+ }
+ PL_regmatch_state = st;
+ locinput= st->locinput;
+
+ DEBUG_STATE_pp("pop");
+ depth--;
+ if (yes_state == st)
+ yes_state = st->u.yes.prev_yes_state;
+
+ state_num = st->resume_state + 1; /* failure = success + 1 */
+ goto reenter_switch;
+ }
+ result = 0;
+
+ final_exit:
+ if (rex->intflags & PREGf_VERBARG_SEEN) {
+ SV *sv_err = get_sv("REGERROR", 1);
+ SV *sv_mrk = get_sv("REGMARK", 1);
+ if (result) {
+ sv_commit = &PL_sv_no;
+ if (!sv_yes_mark)
+ sv_yes_mark = &PL_sv_yes;
+ } else {
+ if (!sv_commit)
+ sv_commit = &PL_sv_yes;
+ sv_yes_mark = &PL_sv_no;
+ }
+ sv_setsv(sv_err, sv_commit);
+ sv_setsv(sv_mrk, sv_yes_mark);
+ }
+
+
+ if (last_pushed_cv) {
+ dSP;
+ POP_MULTICALL;
+ PERL_UNUSED_VAR(SP);
+ }
+
+ assert(!result || locinput - reginfo->strbeg >= 0);
+ return result ? locinput - reginfo->strbeg : -1;
+}
+
+/*
+ - regrepeat - repeatedly match something simple, report how many
+ *
+ * What 'simple' means is a node which can be the operand of a quantifier like
+ * '+', or {1,3}
+ *
+ * startposp - pointer a pointer to the start position. This is updated
+ * to point to the byte following the highest successful
+ * match.
+ * p - the regnode to be repeatedly matched against.
+ * reginfo - struct holding match state, such as strend
+ * max - maximum number of things to match.
+ * depth - (for debugging) backtracking depth.
+ */
+STATIC I32
+S_regrepeat(pTHX_ regexp *prog, char **startposp, const regnode *p,
+ regmatch_info *const reginfo, I32 max, int depth)
+{
+ dVAR;
+ char *scan; /* Pointer to current position in target string */
+ I32 c;
+ char *loceol = reginfo->strend; /* local version */
+ I32 hardcount = 0; /* How many matches so far */
+ bool utf8_target = reginfo->is_utf8_target;
+ int to_complement = 0; /* Invert the result? */
+ UV utf8_flags;
+ _char_class_number classnum;
+#ifndef DEBUGGING
+ PERL_UNUSED_ARG(depth);
+#endif
+
+ PERL_ARGS_ASSERT_REGREPEAT;
+
+ scan = *startposp;
+ if (max == REG_INFTY)
+ max = I32_MAX;
+ else if (! utf8_target && loceol - scan > max)
+ loceol = scan + max;
+
+ /* Here, for the case of a non-UTF-8 target we have adjusted <loceol> down
+ * to the maximum of how far we should go in it (leaving it set to the real
+ * end, if the maximum permissible would take us beyond that). This allows
+ * us to make the loop exit condition that we haven't gone past <loceol> to
+ * also mean that we haven't exceeded the max permissible count, saving a
+ * test each time through the loop. But it assumes that the OP matches a
+ * single byte, which is true for most of the OPs below when applied to a
+ * non-UTF-8 target. Those relatively few OPs that don't have this
+ * characteristic will have to compensate.
+ *
+ * There is no adjustment for UTF-8 targets, as the number of bytes per
+ * character varies. OPs will have to test both that the count is less
+ * than the max permissible (using <hardcount> to keep track), and that we
+ * are still within the bounds of the string (using <loceol>. A few OPs
+ * match a single byte no matter what the encoding. They can omit the max
+ * test if, for the UTF-8 case, they do the adjustment that was skipped
+ * above.
+ *
+ * Thus, the code above sets things up for the common case; and exceptional
+ * cases need extra work; the common case is to make sure <scan> doesn't
+ * go past <loceol>, and for UTF-8 to also use <hardcount> to make sure the
+ * count doesn't exceed the maximum permissible */
+
+ switch (OP(p)) {
+ case REG_ANY:
+ if (utf8_target) {
+ while (scan < loceol && hardcount < max && *scan != '\n') {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && *scan != '\n')
+ scan++;
+ }
+ break;
+ case SANY:
+ if (utf8_target) {
+ while (scan < loceol && hardcount < max) {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ }
+ else
+ scan = loceol;
+ break;
+ case CANY: /* Move <scan> forward <max> bytes, unless goes off end */
+ if (utf8_target && loceol - scan > max) {
+
+ /* <loceol> hadn't been adjusted in the UTF-8 case */
+ scan += max;
+ }
+ else {
+ scan = loceol;
+ }
+ break;
+ case EXACT:
+ assert(STR_LEN(p) == reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1);
+
+ c = (U8)*STRING(p);
+
+ /* Can use a simple loop if the pattern char to match on is invariant
+ * under UTF-8, or both target and pattern aren't UTF-8. Note that we
+ * can use UTF8_IS_INVARIANT() even if the pattern isn't UTF-8, as it's
+ * true iff it doesn't matter if the argument is in UTF-8 or not */
+ if (UTF8_IS_INVARIANT(c) || (! utf8_target && ! reginfo->is_utf8_pat)) {
+ if (utf8_target && loceol - scan > max) {
+ /* We didn't adjust <loceol> because is UTF-8, but ok to do so,
+ * since here, to match at all, 1 char == 1 byte */
+ loceol = scan + max;
+ }
+ while (scan < loceol && UCHARAT(scan) == c) {
+ scan++;
+ }
+ }
+ else if (reginfo->is_utf8_pat) {
+ if (utf8_target) {
+ STRLEN scan_char_len;
+
+ /* When both target and pattern are UTF-8, we have to do
+ * string EQ */
+ while (hardcount < max
+ && scan < loceol
+ && (scan_char_len = UTF8SKIP(scan)) <= STR_LEN(p)
+ && memEQ(scan, STRING(p), scan_char_len))
+ {
+ scan += scan_char_len;
+ hardcount++;
+ }
+ }
+ else if (! UTF8_IS_ABOVE_LATIN1(c)) {
+
+ /* Target isn't utf8; convert the character in the UTF-8
+ * pattern to non-UTF8, and do a simple loop */
+ c = TWO_BYTE_UTF8_TO_UNI(c, *(STRING(p) + 1));
+ while (scan < loceol && UCHARAT(scan) == c) {
+ scan++;
+ }
+ } /* else pattern char is above Latin1, can't possibly match the
+ non-UTF-8 target */
+ }
+ else {
+
+ /* Here, the string must be utf8; pattern isn't, and <c> is
+ * different in utf8 than not, so can't compare them directly.
+ * Outside the loop, find the two utf8 bytes that represent c, and
+ * then look for those in sequence in the utf8 string */
+ U8 high = UTF8_TWO_BYTE_HI(c);
+ U8 low = UTF8_TWO_BYTE_LO(c);
+
+ while (hardcount < max
+ && scan + 1 < loceol
+ && UCHARAT(scan) == high
+ && UCHARAT(scan + 1) == low)
+ {
+ scan += 2;
+ hardcount++;
+ }
+ }
+ break;
+
+ case EXACTFA:
+ utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
+ goto do_exactf;
+
+ case EXACTFL:
+ RXp_MATCH_TAINTED_on(prog);
+ utf8_flags = FOLDEQ_UTF8_LOCALE;
+ goto do_exactf;
+
+ case EXACTF:
+ utf8_flags = 0;
+ goto do_exactf;
+
+ case EXACTFU_SS:
+ case EXACTFU_TRICKYFOLD:
+ case EXACTFU:
+ utf8_flags = reginfo->is_utf8_pat ? FOLDEQ_S2_ALREADY_FOLDED : 0;
+
+ do_exactf: {
+ int c1, c2;
+ U8 c1_utf8[UTF8_MAXBYTES+1], c2_utf8[UTF8_MAXBYTES+1];
+
+ assert(STR_LEN(p) == reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1);
+
+ if (S_setup_EXACTISH_ST_c1_c2(aTHX_ p, &c1, c1_utf8, &c2, c2_utf8,
+ reginfo))
+ {
+ if (c1 == CHRTEST_VOID) {
+ /* Use full Unicode fold matching */
+ char *tmpeol = reginfo->strend;
+ STRLEN pat_len = reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1;
+ while (hardcount < max
+ && foldEQ_utf8_flags(scan, &tmpeol, 0, utf8_target,
+ STRING(p), NULL, pat_len,
+ reginfo->is_utf8_pat, utf8_flags))
+ {
+ scan = tmpeol;
+ tmpeol = reginfo->strend;
+ hardcount++;
+ }
+ }
+ else if (utf8_target) {
+ if (c1 == c2) {
+ while (scan < loceol
+ && hardcount < max
+ && memEQ(scan, c1_utf8, UTF8SKIP(scan)))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ }
+ else {
+ while (scan < loceol
+ && hardcount < max
+ && (memEQ(scan, c1_utf8, UTF8SKIP(scan))
+ || memEQ(scan, c2_utf8, UTF8SKIP(scan))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ }
+ }
+ else if (c1 == c2) {
+ while (scan < loceol && UCHARAT(scan) == c1) {
+ scan++;
+ }
+ }
+ else {
+ while (scan < loceol &&
+ (UCHARAT(scan) == c1 || UCHARAT(scan) == c2))
+ {
+ scan++;
+ }
+ }
+ }
+ break;
+ }
+ case ANYOF:
+ case ANYOF_WARN_SUPER:
+ if (utf8_target) {
+ while (hardcount < max
+ && scan < loceol
+ && reginclass(prog, p, (U8*)scan, utf8_target))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ } else {
+ while (scan < loceol && REGINCLASS(prog, p, (U8*)scan))
+ scan++;
+ }
+ break;
+
+ /* The argument (FLAGS) to all the POSIX node types is the class number */
+
+ case NPOSIXL:
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXL:
+ RXp_MATCH_TAINTED_on(prog);
+ if (! utf8_target) {
+ while (scan < loceol && to_complement ^ cBOOL(isFOO_lc(FLAGS(p),
+ *scan)))
+ {
+ scan++;
+ }
+ } else {
+ while (hardcount < max && scan < loceol
+ && to_complement ^ cBOOL(isFOO_utf8_lc(FLAGS(p),
+ (U8 *) scan)))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ }
+ break;
+
+ case POSIXD:
+ if (utf8_target) {
+ goto utf8_posix;
+ }
+ /* FALLTHROUGH */
+
+ case POSIXA:
+ if (utf8_target && loceol - scan > max) {
+
+ /* We didn't adjust <loceol> at the beginning of this routine
+ * because is UTF-8, but it is actually ok to do so, since here, to
+ * match, 1 char == 1 byte. */
+ loceol = scan + max;
+ }
+ while (scan < loceol && _generic_isCC_A((U8) *scan, FLAGS(p))) {
+ scan++;
+ }
+ break;
+
+ case NPOSIXD:
+ if (utf8_target) {
+ to_complement = 1;
+ goto utf8_posix;
+ }
+ /* FALL THROUGH */
+
+ case NPOSIXA:
+ if (! utf8_target) {
+ while (scan < loceol && ! _generic_isCC_A((U8) *scan, FLAGS(p))) {
+ scan++;
+ }
+ }
+ else {
+
+ /* The complement of something that matches only ASCII matches all
+ * UTF-8 variant code points, plus everything in ASCII that isn't
+ * in the class. */
+ while (hardcount < max && scan < loceol
+ && (! UTF8_IS_INVARIANT(*scan)
+ || ! _generic_isCC_A((U8) *scan, FLAGS(p))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ }
+ break;
+
+ case NPOSIXU:
+ to_complement = 1;
+ /* FALLTHROUGH */
+
+ case POSIXU:
+ if (! utf8_target) {
+ while (scan < loceol && to_complement
+ ^ cBOOL(_generic_isCC((U8) *scan, FLAGS(p))))
+ {
+ scan++;
+ }
+ }
+ else {
+ utf8_posix:
+ classnum = (_char_class_number) FLAGS(p);
+ if (classnum < _FIRST_NON_SWASH_CC) {
+
+ /* Here, a swash is needed for above-Latin1 code points.
+ * Process as many Latin1 code points using the built-in rules.
+ * Go to another loop to finish processing upon encountering
+ * the first Latin1 code point. We could do that in this loop
+ * as well, but the other way saves having to test if the swash
+ * has been loaded every time through the loop: extra space to
+ * save a test. */
+ while (hardcount < max && scan < loceol) {
+ if (UTF8_IS_INVARIANT(*scan)) {
+ if (! (to_complement ^ cBOOL(_generic_isCC((U8) *scan,
+ classnum))))
+ {
+ break;
+ }
+ scan++;
+ }
+ else if (UTF8_IS_DOWNGRADEABLE_START(*scan)) {
+ if (! (to_complement
+ ^ cBOOL(_generic_isCC(TWO_BYTE_UTF8_TO_UNI(*scan,
+ *(scan + 1)),
+ classnum))))
+ {
+ break;
+ }
+ scan += 2;
+ }
+ else {
+ goto found_above_latin1;
+ }
+
+ hardcount++;
+ }
+ }
+ else {
+ /* For these character classes, the knowledge of how to handle
+ * every code point is compiled in to Perl via a macro. This
+ * code is written for making the loops as tight as possible.
+ * It could be refactored to save space instead */
+ switch (classnum) {
+ case _CC_ENUM_SPACE: /* XXX would require separate code
+ if we revert the change of \v
+ matching this */
+ /* FALL THROUGH */
+ case _CC_ENUM_PSXSPC:
+ while (hardcount < max
+ && scan < loceol
+ && (to_complement ^ cBOOL(isSPACE_utf8(scan))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+ case _CC_ENUM_BLANK:
+ while (hardcount < max
+ && scan < loceol
+ && (to_complement ^ cBOOL(isBLANK_utf8(scan))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+ case _CC_ENUM_XDIGIT:
+ while (hardcount < max
+ && scan < loceol
+ && (to_complement ^ cBOOL(isXDIGIT_utf8(scan))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+ case _CC_ENUM_VERTSPACE:
+ while (hardcount < max
+ && scan < loceol
+ && (to_complement ^ cBOOL(isVERTWS_utf8(scan))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+ case _CC_ENUM_CNTRL:
+ while (hardcount < max
+ && scan < loceol
+ && (to_complement ^ cBOOL(isCNTRL_utf8(scan))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+ default:
+ Perl_croak(aTHX_ "panic: regrepeat() node %d='%s' has an unexpected character class '%d'", OP(p), PL_reg_name[OP(p)], classnum);
+ }
+ }
+ }
+ break;
+
+ found_above_latin1: /* Continuation of POSIXU and NPOSIXU */
+
+ /* Load the swash if not already present */
+ if (! PL_utf8_swash_ptrs[classnum]) {
+ U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
+ PL_utf8_swash_ptrs[classnum] = _core_swash_init(
+ "utf8", swash_property_names[classnum],
+ &PL_sv_undef, 1, 0, NULL, &flags);
+ }
+
+ while (hardcount < max && scan < loceol
+ && to_complement ^ cBOOL(_generic_utf8(
+ classnum,
+ scan,
+ swash_fetch(PL_utf8_swash_ptrs[classnum],
+ (U8 *) scan,
+ TRUE))))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ break;
+
+ case LNBREAK:
+ if (utf8_target) {
+ while (hardcount < max && scan < loceol &&
+ (c=is_LNBREAK_utf8_safe(scan, loceol))) {
+ scan += c;
+ hardcount++;
+ }
+ } else {
+ /* LNBREAK can match one or two latin chars, which is ok, but we
+ * have to use hardcount in this situation, and throw away the
+ * adjustment to <loceol> done before the switch statement */
+ loceol = reginfo->strend;
+ while (scan < loceol && (c=is_LNBREAK_latin1_safe(scan, loceol))) {
+ scan+=c;
+ hardcount++;
+ }
+ }
+ break;
+
+ case BOUND:
+ case BOUNDA:
+ case BOUNDL:
+ case BOUNDU:
+ case EOS:
+ case GPOS:
+ case KEEPS:
+ case NBOUND:
+ case NBOUNDA:
+ case NBOUNDL:
+ case NBOUNDU:
+ case OPFAIL:
+ case SBOL:
+ case SEOL:
+ /* These are all 0 width, so match right here or not at all. */
+ break;
+
+ default:
+ Perl_croak(aTHX_ "panic: regrepeat() called with unrecognized node type %d='%s'", OP(p), PL_reg_name[OP(p)]);
+ assert(0); /* NOTREACHED */
+
+ }
+
+ if (hardcount)
+ c = hardcount;
+ else
+ c = scan - *startposp;
+ *startposp = scan;
+
+ DEBUG_r({
+ GET_RE_DEBUG_FLAGS_DECL;
+ DEBUG_EXECUTE_r({
+ SV * const prop = sv_newmortal();
+ regprop(prog, prop, p);
+ PerlIO_printf(Perl_debug_log,
+ "%*s %s can match %"IVdf" times out of %"IVdf"...\n",
+ REPORT_CODE_OFF + depth*2, "", SvPVX_const(prop),(IV)c,(IV)max);
+ });
+ });
+
+ return(c);
+}
+
+
+#if !defined(PERL_IN_XSUB_RE) || defined(PLUGGABLE_RE_EXTENSION)
+/*
+- regclass_swash - prepare the utf8 swash. Wraps the shared core version to
+create a copy so that changes the caller makes won't change the shared one.
+If <altsvp> is non-null, will return NULL in it, for back-compat.
+ */
+SV *
+Perl_regclass_swash(pTHX_ const regexp *prog, const regnode* node, bool doinit, SV** listsvp, SV **altsvp)
+{
+ PERL_ARGS_ASSERT_REGCLASS_SWASH;
+
+ if (altsvp) {
+ *altsvp = NULL;
+ }
+
+ return newSVsv(core_regclass_swash(prog, node, doinit, listsvp));
+}
+#endif
+
+STATIC SV *
+S_core_regclass_swash(pTHX_ const regexp *prog, const regnode* node, bool doinit, SV** listsvp)
+{
+ /* Returns the swash for the input 'node' in the regex 'prog'.
+ * If <doinit> is 'true', will attempt to create the swash if not already
+ * done.
+ * If <listsvp> is non-null, will return the printable contents of the
+ * swash. This can be used to get debugging information even before the
+ * swash exists, by calling this function with 'doinit' set to false, in
+ * which case the components that will be used to eventually create the
+ * swash are returned (in a printable form).
+ * Tied intimately to how regcomp.c sets up the data structure */
+
+ dVAR;
+ SV *sw = NULL;
+ SV *si = NULL; /* Input swash initialization string */
+ SV* invlist = NULL;
+
+ RXi_GET_DECL(prog,progi);
+ const struct reg_data * const data = prog ? progi->data : NULL;
+
+ PERL_ARGS_ASSERT_CORE_REGCLASS_SWASH;
+
+ assert(ANYOF_NONBITMAP(node));
+
+ if (data && data->count) {
+ const U32 n = ARG(node);
+
+ if (data->what[n] == 's') {
+ SV * const rv = MUTABLE_SV(data->data[n]);
+ AV * const av = MUTABLE_AV(SvRV(rv));
+ SV **const ary = AvARRAY(av);
+ U8 swash_init_flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
+
+ si = *ary; /* ary[0] = the string to initialize the swash with */
+
+ /* Elements 2 and 3 are either both present or both absent. [2] is
+ * any inversion list generated at compile time; [3] indicates if
+ * that inversion list has any user-defined properties in it. */
+ if (av_len(av) >= 2) {
+ invlist = ary[2];
+ if (SvUV(ary[3])) {
+ swash_init_flags |= _CORE_SWASH_INIT_USER_DEFINED_PROPERTY;
+ }
+ }
+ else {
+ invlist = NULL;
+ }
+
+ /* Element [1] is reserved for the set-up swash. If already there,
+ * return it; if not, create it and store it there */
+ if (SvROK(ary[1])) {
+ sw = ary[1];
+ }
+ else if (si && doinit) {
+
+ sw = _core_swash_init("utf8", /* the utf8 package */
+ "", /* nameless */
+ si,
+ 1, /* binary */
+ 0, /* not from tr/// */
+ invlist,
+ &swash_init_flags);
+ (void)av_store(av, 1, sw);
+ }
+ }
+ }
+
+ /* If requested, return a printable version of what this swash matches */
+ if (listsvp) {
+ SV* matches_string = newSVpvn("", 0);
+
+ /* The swash should be used, if possible, to get the data, as it
+ * contains the resolved data. But this function can be called at
+ * compile-time, before everything gets resolved, in which case we
+ * return the currently best available information, which is the string
+ * that will eventually be used to do that resolving, 'si' */
+ if ((! sw || (invlist = _get_swash_invlist(sw)) == NULL)
+ && (si && si != &PL_sv_undef))
+ {
+ sv_catsv(matches_string, si);
+ }
+
+ /* Add the inversion list to whatever we have. This may have come from
+ * the swash, or from an input parameter */
+ if (invlist) {
+ sv_catsv(matches_string, _invlist_contents(invlist));
+ }
+ *listsvp = matches_string;
+ }
+
+ return sw;
+}
+
+/*
+ - reginclass - determine if a character falls into a character class
+
+ n is the ANYOF regnode
+ p is the target string
+ utf8_target tells whether p is in UTF-8.
+
+ Returns true if matched; false otherwise.
+
+ Note that this can be a synthetic start class, a combination of various
+ nodes, so things you think might be mutually exclusive, such as locale,
+ aren't. It can match both locale and non-locale
+
+ */
+
+STATIC bool
+S_reginclass(pTHX_ regexp * const prog, const regnode * const n, const U8* const p, const bool utf8_target)
+{
+ dVAR;
+ const char flags = ANYOF_FLAGS(n);
+ bool match = FALSE;
+ UV c = *p;
+
+ PERL_ARGS_ASSERT_REGINCLASS;
+
+ /* If c is not already the code point, get it. Note that
+ * UTF8_IS_INVARIANT() works even if not in UTF-8 */
+ if (! UTF8_IS_INVARIANT(c) && utf8_target) {
+ STRLEN c_len = 0;
+ c = utf8n_to_uvchr(p, UTF8_MAXBYTES, &c_len,
+ (UTF8_ALLOW_DEFAULT & UTF8_ALLOW_ANYUV)
+ | UTF8_ALLOW_FFFF | UTF8_CHECK_ONLY);
+ /* see [perl #37836] for UTF8_ALLOW_ANYUV; [perl #38293] for
+ * UTF8_ALLOW_FFFF */
+ if (c_len == (STRLEN)-1)
+ Perl_croak(aTHX_ "Malformed UTF-8 character (fatal)");
+ }
+
+ /* If this character is potentially in the bitmap, check it */
+ if (c < 256) {
+ if (ANYOF_BITMAP_TEST(n, c))
+ match = TRUE;
+ else if (flags & ANYOF_NON_UTF8_LATIN1_ALL
+ && ! utf8_target
+ && ! isASCII(c))
+ {
+ match = TRUE;
+ }
+ else if (flags & ANYOF_LOCALE) {
+ RXp_MATCH_TAINTED_on(prog);
+
+ if ((flags & ANYOF_LOC_FOLD)
+ && ANYOF_BITMAP_TEST(n, PL_fold_locale[c]))
+ {
+ match = TRUE;
+ }
+ else if (ANYOF_CLASS_TEST_ANY_SET(n)) {
+
+ /* The data structure is arranged so bits 0, 2, 4, ... are set
+ * if the class includes the Posix character class given by
+ * bit/2; and 1, 3, 5, ... are set if the class includes the
+ * complemented Posix class given by int(bit/2). So we loop
+ * through the bits, each time changing whether we complement
+ * the result or not. Suppose for the sake of illustration
+ * that bits 0-3 mean respectively, \w, \W, \s, \S. If bit 0
+ * is set, it means there is a match for this ANYOF node if the
+ * character is in the class given by the expression (0 / 2 = 0
+ * = \w). If it is in that class, isFOO_lc() will return 1,
+ * and since 'to_complement' is 0, the result will stay TRUE,
+ * and we exit the loop. Suppose instead that bit 0 is 0, but
+ * bit 1 is 1. That means there is a match if the character
+ * matches \W. We won't bother to call isFOO_lc() on bit 0,
+ * but will on bit 1. On the second iteration 'to_complement'
+ * will be 1, so the exclusive or will reverse things, so we
+ * are testing for \W. On the third iteration, 'to_complement'
+ * will be 0, and we would be testing for \s; the fourth
+ * iteration would test for \S, etc.
+ *
+ * Note that this code assumes that all the classes are closed
+ * under folding. For example, if a character matches \w, then
+ * its fold does too; and vice versa. This should be true for
+ * any well-behaved locale for all the currently defined Posix
+ * classes, except for :lower: and :upper:, which are handled
+ * by the pseudo-class :cased: which matches if either of the
+ * other two does. To get rid of this assumption, an outer
+ * loop could be used below to iterate over both the source
+ * character, and its fold (if different) */
+
+ int count = 0;
+ int to_complement = 0;
+ while (count < ANYOF_MAX) {
+ if (ANYOF_CLASS_TEST(n, count)
+ && to_complement ^ cBOOL(isFOO_lc(count/2, (U8) c)))
+ {
+ match = TRUE;
+ break;
+ }
+ count++;
+ to_complement ^= 1;
+ }
+ }
+ }
+ }
+
+ /* If the bitmap didn't (or couldn't) match, and something outside the
+ * bitmap could match, try that. Locale nodes specify completely the
+ * behavior of code points in the bit map (otherwise, a utf8 target would
+ * cause them to be treated as Unicode and not locale), except in
+ * the very unlikely event when this node is a synthetic start class, which
+ * could be a combination of locale and non-locale nodes. So allow locale
+ * to match for the synthetic start class, which will give a false
+ * positive that will be resolved when the match is done again as not part
+ * of the synthetic start class */
+ if (!match) {
+ if (utf8_target && (flags & ANYOF_UNICODE_ALL) && c >= 256) {
+ match = TRUE; /* Everything above 255 matches */
+ }
+ else if (ANYOF_NONBITMAP(n)
+ && ((flags & ANYOF_NONBITMAP_NON_UTF8)
+ || (utf8_target
+ && (c >=256
+ || (! (flags & ANYOF_LOCALE))
+ || OP(n) == ANYOF_SYNTHETIC))))
+ {
+ SV * const sw = core_regclass_swash(prog, n, TRUE, 0);
+ if (sw) {
+ U8 * utf8_p;
+ if (utf8_target) {
+ utf8_p = (U8 *) p;
+ } else { /* Convert to utf8 */
+ STRLEN len = 1;
+ utf8_p = bytes_to_utf8(p, &len);
+ }
+
+ if (swash_fetch(sw, utf8_p, TRUE)) {
+ match = TRUE;
+ }
+
+ /* If we allocated a string above, free it */
+ if (! utf8_target) Safefree(utf8_p);
+ }
+ }
+
+ if (UNICODE_IS_SUPER(c)
+ && OP(n) == ANYOF_WARN_SUPER
+ && ckWARN_d(WARN_NON_UNICODE))
+ {
+ Perl_warner(aTHX_ packWARN(WARN_NON_UNICODE),
+ "Code point 0x%04"UVXf" is not Unicode, all \\p{} matches fail; all \\P{} matches succeed", c);
+ }
+ }
+
+ /* The xor complements the return if to invert: 1^1 = 0, 1^0 = 1 */
+ return cBOOL(flags & ANYOF_INVERT) ^ match;
+}
+
+STATIC U8 *
+S_reghop3(U8 *s, I32 off, const U8* lim)
+{
+ /* return the position 'off' UTF-8 characters away from 's', forward if
+ * 'off' >= 0, backwards if negative. But don't go outside of position
+ * 'lim', which better be < s if off < 0 */
+
+ dVAR;
+
+ PERL_ARGS_ASSERT_REGHOP3;
+
+ if (off >= 0) {
+ while (off-- && s < lim) {
+ /* XXX could check well-formedness here */
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (off++ && s > lim) {
+ s--;
+ if (UTF8_IS_CONTINUED(*s)) {
+ while (s > lim && UTF8_IS_CONTINUATION(*s))
+ s--;
+ }
+ /* XXX could check well-formedness here */
+ }
+ }
+ return s;
+}
+
+#ifdef XXX_dmq
+/* there are a bunch of places where we use two reghop3's that should
+ be replaced with this routine. but since thats not done yet
+ we ifdef it out - dmq
+*/
+STATIC U8 *
+S_reghop4(U8 *s, I32 off, const U8* llim, const U8* rlim)
+{
+ dVAR;
+
+ PERL_ARGS_ASSERT_REGHOP4;
+
+ if (off >= 0) {
+ while (off-- && s < rlim) {
+ /* XXX could check well-formedness here */
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (off++ && s > llim) {
+ s--;
+ if (UTF8_IS_CONTINUED(*s)) {
+ while (s > llim && UTF8_IS_CONTINUATION(*s))
+ s--;
+ }
+ /* XXX could check well-formedness here */
+ }
+ }
+ return s;
+}
+#endif
+
+STATIC U8 *
+S_reghopmaybe3(U8* s, I32 off, const U8* lim)
+{
+ dVAR;
+
+ PERL_ARGS_ASSERT_REGHOPMAYBE3;
+
+ if (off >= 0) {
+ while (off-- && s < lim) {
+ /* XXX could check well-formedness here */
+ s += UTF8SKIP(s);
+ }
+ if (off >= 0)
+ return NULL;
+ }
+ else {
+ while (off++ && s > lim) {
+ s--;
+ if (UTF8_IS_CONTINUED(*s)) {
+ while (s > lim && UTF8_IS_CONTINUATION(*s))
+ s--;
+ }
+ /* XXX could check well-formedness here */
+ }
+ if (off <= 0)
+ return NULL;
+ }
+ return s;
+}
+
+
+/* when executing a regex that may have (?{}), extra stuff needs setting
+ up that will be visible to the called code, even before the current
+ match has finished. In particular:
+
+ * $_ is localised to the SV currently being matched;
+ * pos($_) is created if necessary, ready to be updated on each call-out
+ to code;
+ * a fake PMOP is created that can be set to PL_curpm (normally PL_curpm
+ isn't set until the current pattern is successfully finished), so that
+ $1 etc of the match-so-far can be seen;
+ * save the old values of subbeg etc of the current regex, and set then
+ to the current string (again, this is normally only done at the end
+ of execution)
+*/
+
+static void
+S_setup_eval_state(pTHX_ regmatch_info *const reginfo)
+{
+ MAGIC *mg;
+ regexp *const rex = ReANY(reginfo->prog);
+ regmatch_info_aux_eval *eval_state = reginfo->info_aux_eval;
+
+ eval_state->rex = rex;
+
+ if (reginfo->sv) {
+ /* Make $_ available to executed code. */
+ if (reginfo->sv != DEFSV) {
+ SAVE_DEFSV;
+ DEFSV_set(reginfo->sv);
+ }
+
+ if (!(mg = mg_find_mglob(reginfo->sv))) {
+ /* prepare for quick setting of pos */
+ mg = sv_magicext_mglob(reginfo->sv);
+ mg->mg_len = -1;
+ }
+ eval_state->pos_magic = mg;
+ eval_state->pos = mg->mg_len;
+ }
+ else
+ eval_state->pos_magic = NULL;
+
+ if (!PL_reg_curpm) {
+ /* PL_reg_curpm is a fake PMOP that we can attach the current
+ * regex to and point PL_curpm at, so that $1 et al are visible
+ * within a /(?{})/. It's just allocated once per interpreter the
+ * first time its needed */
+ Newxz(PL_reg_curpm, 1, PMOP);
+#ifdef USE_ITHREADS
+ {
+ SV* const repointer = &PL_sv_undef;
+ /* this regexp is also owned by the new PL_reg_curpm, which
+ will try to free it. */
+ av_push(PL_regex_padav, repointer);
+ PL_reg_curpm->op_pmoffset = av_len(PL_regex_padav);
+ PL_regex_pad = AvARRAY(PL_regex_padav);
+ }
+#endif
+ }
+ SET_reg_curpm(reginfo->prog);
+ eval_state->curpm = PL_curpm;
+ PL_curpm = PL_reg_curpm;
+ if (RXp_MATCH_COPIED(rex)) {
+ /* Here is a serious problem: we cannot rewrite subbeg,
+ since it may be needed if this match fails. Thus
+ $` inside (?{}) could fail... */
+ eval_state->subbeg = rex->subbeg;
+ eval_state->sublen = rex->sublen;
+ eval_state->suboffset = rex->suboffset;
+ eval_state->subcoffset = rex->subcoffset;
+#ifdef PERL_ANY_COW
+ eval_state->saved_copy = rex->saved_copy;
+#endif
+ RXp_MATCH_COPIED_off(rex);
+ }
+ else
+ eval_state->subbeg = NULL;
+ rex->subbeg = (char *)reginfo->strbeg;
+ rex->suboffset = 0;
+ rex->subcoffset = 0;
+ rex->sublen = reginfo->strend - reginfo->strbeg;
+}
+
+
+/* destructor to clear up regmatch_info_aux and regmatch_info_aux_eval */
+
+static void
+S_cleanup_regmatch_info_aux(pTHX_ void *arg)
+{
+ dVAR;
+ regmatch_info_aux *aux = (regmatch_info_aux *) arg;
+ regmatch_info_aux_eval *eval_state = aux->info_aux_eval;
+ regmatch_slab *s;
+
+ Safefree(aux->poscache);
+
+ if (eval_state) {
+
+ /* undo the effects of S_setup_eval_state() */
+
+ if (eval_state->subbeg) {
+ regexp * const rex = eval_state->rex;
+ rex->subbeg = eval_state->subbeg;
+ rex->sublen = eval_state->sublen;
+ rex->suboffset = eval_state->suboffset;
+ rex->subcoffset = eval_state->subcoffset;
+#ifdef PERL_ANY_COW
+ rex->saved_copy = eval_state->saved_copy;
+#endif
+ RXp_MATCH_COPIED_on(rex);
+ }
+ if (eval_state->pos_magic)
+ eval_state->pos_magic->mg_len = eval_state->pos;
+
+ PL_curpm = eval_state->curpm;
+ }
+
+ PL_regmatch_state = aux->old_regmatch_state;
+ PL_regmatch_slab = aux->old_regmatch_slab;
+
+ /* free all slabs above current one - this must be the last action
+ * of this function, as aux and eval_state are allocated within
+ * slabs and may be freed here */
+
+ s = PL_regmatch_slab->next;
+ if (s) {
+ PL_regmatch_slab->next = NULL;
+ while (s) {
+ regmatch_slab * const osl = s;
+ s = s->next;
+ Safefree(osl);
+ }
+ }
+}
+
+
+STATIC void
+S_to_utf8_substr(pTHX_ regexp *prog)
+{
+ /* Converts substr fields in prog from bytes to UTF-8, calling fbm_compile
+ * on the converted value */
+
+ int i = 1;
+
+ PERL_ARGS_ASSERT_TO_UTF8_SUBSTR;
+
+ do {
+ if (prog->substrs->data[i].substr
+ && !prog->substrs->data[i].utf8_substr) {
+ SV* const sv = newSVsv(prog->substrs->data[i].substr);
+ prog->substrs->data[i].utf8_substr = sv;
+ sv_utf8_upgrade(sv);
+ if (SvVALID(prog->substrs->data[i].substr)) {
+ if (SvTAIL(prog->substrs->data[i].substr)) {
+ /* Trim the trailing \n that fbm_compile added last
+ time. */
+ SvCUR_set(sv, SvCUR(sv) - 1);
+ /* Whilst this makes the SV technically "invalid" (as its
+ buffer is no longer followed by "\0") when fbm_compile()
+ adds the "\n" back, a "\0" is restored. */
+ fbm_compile(sv, FBMcf_TAIL);
+ } else
+ fbm_compile(sv, 0);
+ }
+ if (prog->substrs->data[i].substr == prog->check_substr)
+ prog->check_utf8 = sv;
+ }
+ } while (i--);
+}
+
+STATIC bool
+S_to_byte_substr(pTHX_ regexp *prog)
+{
+ /* Converts substr fields in prog from UTF-8 to bytes, calling fbm_compile
+ * on the converted value; returns FALSE if can't be converted. */
+
+ dVAR;
+ int i = 1;
+
+ PERL_ARGS_ASSERT_TO_BYTE_SUBSTR;
+
+ do {
+ if (prog->substrs->data[i].utf8_substr
+ && !prog->substrs->data[i].substr) {
+ SV* sv = newSVsv(prog->substrs->data[i].utf8_substr);
+ if (! sv_utf8_downgrade(sv, TRUE)) {
+ return FALSE;
+ }
+ if (SvVALID(prog->substrs->data[i].utf8_substr)) {
+ if (SvTAIL(prog->substrs->data[i].utf8_substr)) {
+ /* Trim the trailing \n that fbm_compile added last
+ time. */
+ SvCUR_set(sv, SvCUR(sv) - 1);
+ fbm_compile(sv, FBMcf_TAIL);
+ } else
+ fbm_compile(sv, 0);
+ }
+ prog->substrs->data[i].substr = sv;
+ if (prog->substrs->data[i].utf8_substr == prog->check_utf8)
+ prog->check_substr = sv;
+ }
+ } while (i--);
+
+ return TRUE;
+}
+
+/*
+ * Local variables:
+ * c-indentation-style: bsd
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ *
+ * ex: set ts=8 sts=4 sw=4 et:
+ */
projects / perl / modules / re-engine-Hooks.git / blobdiff