Scope::Upper - Act on upper scopes.
VERSION
- Version 0.17
+ Version 0.22
SYNOPSIS
"reap", "localize", "localize_elem", "localize_delete" and "WORDS" :
package Scope;
- use Scope::Upper qw<reap localize localize_elem localize_delete :words>;
+ use Scope::Upper qw<
+ reap localize localize_elem localize_delete
+ :words
+ >;
sub new {
my ($class, $name) = @_;
package UserLand;
{
- Scope->new("top"); # initializes $UserLand::tag
+ Scope->new("top"); # initializes $UserLand::tag
{
Scope->catch;
- my $one = 1 + undef; # prints "top: Use of uninitialized value..."
+ my $one = 1 + undef; # prints "top: Use of uninitialized value..."
{
Scope->private;
eval { require Cwd };
- print $@; # prints "Can't locate Cwd.pm in @INC (@INC contains:) at..."
- }
+ print $@; # prints "Can't locate Cwd.pm in @INC
+ } # (@INC contains:) at..."
- require Cwd; # loads Cwd.pm
+ require Cwd; # loads Cwd.pm
}
- } # prints "top: done"
+ } # prints "top: done"
"unwind" and "want_at" :
target('hello'); # "hello from Uplevel::target()"
+ "uid" and "validate_uid" :
+
+ use Scope::Upper qw<uid validate_uid>;
+
+ my $uid;
+
+ {
+ $uid = uid();
+ {
+ if ($uid eq uid(UP)) { # yes
+ ...
+ }
+ if (validate_uid($uid)) { # yes
+ ...
+ }
+ }
+ }
+
+ if (validate_uid($uid)) { # no
+ ...
+ }
+
DESCRIPTION
This module lets you defer actions *at run-time* that will take place
when the control flow returns into an upper scope. Currently, you can:
higher contexts with respectively "localize", "localize_elem" and
"localize_delete" ;
- * return values immediately to an upper level with "unwind", and know
- which context was in use then with "want_at" ;
+ * return values immediately to an upper level with "unwind", "yield"
+ and "leave" ;
+
+ * gather information about an upper context with "want_at" and
+ "context_info" ;
* execute a subroutine in the setting of an upper subroutine stack
- frame with "uplevel".
+ frame with "uplevel" ;
+
+ * uniquely identify contextes with "uid" and "validate_uid".
FUNCTIONS
In all those functions, $context refers to the target scope.
which means that you can safely store it at some point and use it when
needed, and it will still denote the original scope.
- "reap $callback, $context"
+ "reap"
+ reap { ... };
+ reap { ... } $context;
+ &reap($callback, $context);
+
Adds a destructor that calls $callback (in void context) when the upper
scope represented by $context ends.
- "localize $what, $value, $context"
+ "localize"
+ localize $what, $value;
+ localize $what, $value, $context;
+
Introduces a "local" delayed to the time of first return into the upper
scope denoted by $context. $what can be :
implementation detail, this behaviour may change in the future if
proved harmful.
- "localize_elem $what, $key, $value, $context"
+ "localize_elem"
+ localize_elem $what, $key, $value;
+ localize_elem $what, $key, $value, $context;
+
Introduces a "local $what[$key] = $value" or "local $what{$key} =
$value" delayed to the time of first return into the upper scope denoted
by $context. Unlike "localize", $what must be a string and the type of
will be vivified as soon as the localization occurs and emptied when it
ends, although it will still exist in its glob.
- "localize_delete $what, $key, $context"
+ "localize_delete"
+ localize_delete $what, $key;
+ localize_delete $what, $key, $context;
+
Introduces the deletion of a variable or an array/hash element delayed
to the time of first return into the upper scope denoted by $context.
$what can be:
in the upper scope. It's actually more powerful, as &func won't even
"exists" anymore. $key is ignored.
- "unwind @values, $context"
- Returns @values *from* the context pointed by $context, i.e. from the
- subroutine, eval or format at or just above $context, and immediately
- restart the program flow at this point - thus effectively returning to
- an upper scope.
+ "unwind"
+ unwind;
+ unwind @values, $context;
+
+ Returns @values *from* the subroutine, eval or format context pointed by
+ or just above $context, and immediately restarts the program flow at
+ this point - thus effectively returning @values to an upper scope. If
+ @values is empty, then the $context parameter is optional and defaults
+ to the current context (making the call equivalent to a bare "return;")
+ ; otherwise it is mandatory.
The upper context isn't coerced onto @values, which is hence always
evaluated in list context. This means that
will set $num to 'z'. You can use "want_at" to handle these cases.
- "want_at $context"
- Like "wantarray", but for the subroutine/eval/format at or just above
- $context.
+ "yield"
+ yield;
+ yield @values, $context;
+
+ Returns @values *from* the context pointed by or just above $context,
+ and immediately restarts the program flow at this point. If @values is
+ empty, then the $context parameter is optional and defaults to the
+ current context ; otherwise it is mandatory.
- The previous example can then be "corrected" :
+ "yield" differs from "unwind" in that it can target *any* upper scope
+ (besides a "s///e" substitution context) and not necessarily a sub, an
+ eval or a format. Hence you can use it to return values from a "do" or a
+ "map" block :
+
+ my $now = do {
+ local $@;
+ eval { require Time::HiRes } or yield time() => HERE;
+ Time::HiRes::time();
+ };
+
+ my @uniq = map {
+ yield if $seen{$_}++; # returns the empty list from the block
+ ...
+ } @things;
+
+ Like for "unwind", the upper context isn't coerced onto @values. You can
+ use the fifth value returned by "context_info" to handle context
+ coercion.
+
+ "leave"
+ leave;
+ leave @values;
+
+ Immediately returns @values from the current block, whatever it may be
+ (besides a "s///e" substitution context). "leave" is actually a synonym
+ for "yield HERE", while "leave @values" is a synonym for "yield @values,
+ HERE".
+
+ Like for "yield", you can use the fifth value returned by "context_info"
+ to handle context coercion.
+
+ "want_at"
+ my $want = want_at;
+ my $want = want_at $context;
+
+ Like "wantarray" in perlfunc, but for the subroutine, eval or format
+ context located at or just above $context.
+
+ It can be used to revise the example showed in "unwind" :
my $num = sub {
my @a = ('a' .. 'z');
will rightfully set $num to 26.
- "uplevel $code, @args, $context"
- Executes the code reference $code with arguments @args as if it were
+ "context_info"
+ my ($package, $filename, $line, $subroutine, $hasargs,
+ $wantarray, $evaltext, $is_require, $hints, $bitmask,
+ $hinthash) = context_info $context;
+
+ Gives information about the context denoted by $context, akin to what
+ "caller" in perlfunc provides but not limited only to subroutine, eval
+ and format contexts. When $context is omitted, it defaults to the
+ current context.
+
+ The returned values are, in order :
+
+ * *(index 0)* : the namespace in use when the context was created ;
+
+ * *(index 1)* : the name of the file at the point where the context
+ was created ;
+
+ * *(index 2)* : the line number at the point where the context was
+ created ;
+
+ * *(index 3)* : the name of the subroutine called for this context, or
+ "undef" if this is not a subroutine context ;
+
+ * *(index 4)* : a boolean indicating whether a new instance of @_ was
+ set up for this context, or "undef" if this is not a subroutine
+ context ;
+
+ * *(index 5)* : the context (in the sense of "wantarray" in perlfunc)
+ in which the context (in our sense) is executed ;
+
+ * *(index 6)* : the contents of the string being compiled for this
+ context, or "undef" if this is not an eval context ;
+
+ * *(index 7)* : a boolean indicating whether this eval context was
+ created by "require", or "undef" if this is not an eval context ;
+
+ * *(index 8)* : the value of the lexical hints in use when the context
+ was created ;
+
+ * *(index 9)* : a bit string representing the warnings in use when the
+ context was created ;
+
+ * *(index 10)* : a reference to the lexical hints hash in use when the
+ context was created (only on perl 5.10 or greater).
+
+ "uplevel"
+ my @ret = uplevel { ...; return @ret };
+ my @ret = uplevel { my @args = @_; ...; return @ret } @args, $context;
+ my @ret = &uplevel($callback, @args, $context);
+
+ Executes the code reference $callback with arguments @args as if it were
located at the subroutine stack frame pointed by $context, effectively
fooling "caller" and "die" into believing that the call actually
happened higher in the stack. The code is executed in the context of the
my @inverses = target(1, 2, 4); # @inverses contains (0, 0.5, 0.25)
my $count = target(1, 2, 4); # $count is 3
+ Note that if @args is empty, then the $context parameter is optional and
+ defaults to the current context ; otherwise it is mandatory.
+
Sub::Uplevel also implements a pure-Perl version of "uplevel". Both are
identical, with the following caveats :
Albeit the three exceptions listed above, it passes all the tests of
Sub::Uplevel.
+ "uid"
+ my $uid = uid;
+ my $uid = uid $context;
+
+ Returns an unique identifier (UID) for the context (or dynamic scope)
+ pointed by $context, or for the current context if $context is omitted.
+ This UID will only be valid for the life time of the context it
+ represents, and another UID will be generated next time the same scope
+ is executed.
+
+ my $uid;
+
+ {
+ $uid = uid;
+ if ($uid eq uid()) { # yes, this is the same context
+ ...
+ }
+ {
+ if ($uid eq uid()) { # no, we are one scope below
+ ...
+ }
+ if ($uid eq uid(UP)) { # yes, UP points to the same scope as $uid
+ ...
+ }
+ }
+ }
+
+ # $uid is now invalid
+
+ {
+ if ($uid eq uid()) { # no, this is another block
+ ...
+ }
+ }
+
+ For example, each loop iteration gets its own UID :
+
+ my %uids;
+
+ for (1 .. 5) {
+ my $uid = uid;
+ $uids{$uid} = $_;
+ }
+
+ # %uids has 5 entries
+
+ The UIDs are not guaranteed to be numbers, so you must use the "eq"
+ operator to compare them.
+
+ To check whether a given UID is valid, you can use the "validate_uid"
+ function.
+
+ "validate_uid"
+ my $is_valid = validate_uid $uid;
+
+ Returns true if and only if $uid is the UID of a currently valid context
+ (that is, it designates a scope that is higher than the current one in
+ the call stack).
+
+ my $uid;
+
+ {
+ $uid = uid();
+ if (validate_uid($uid)) { # yes
+ ...
+ }
+ {
+ if (validate_uid($uid)) { # yes
+ ...
+ }
+ }
+ }
+
+ if (validate_uid($uid)) { # no
+ ...
+ }
+
CONSTANTS
"SU_THREADSAFE"
True iff the module could have been built when thread-safety features.
WORDS
Constants
"TOP"
+ my $top_context = TOP;
+
Returns the context that currently represents the highest scope.
"HERE"
+ my $current_context = HERE;
+
The context of the current scope.
Getting a context from a context
For any of those functions, $from is expected to be a context. When
omitted, it defaults to the the current context.
- "UP $from"
+ "UP"
+ my $upper_context = UP;
+ my $upper_context = UP $from;
+
The context of the scope just above $from.
- "SUB $from"
+ "SUB"
+ my $sub_context = SUB;
+ my $sub_context = SUB $from;
+
The context of the closest subroutine above $from. Note that $from is
returned if it is already a subroutine context ; hence "SUB SUB == SUB".
- "EVAL $from"
+ "EVAL"
+ my $eval_context = EVAL;
+ my $eval_context = EVAL $from;
+
The context of the closest eval above $from. Note that $from is returned
if it is already an eval context ; hence "EVAL EVAL == EVAL".
When omitted, it defaults to 0 and those functions return the same
context as "HERE".
- "SCOPE $level"
+ "SCOPE"
+ my $context = SCOPE;
+ my $context = SCOPE $level;
+
The $level-th upper context, regardless of its type.
- "CALLER $level"
+ "CALLER"
+ my $context = CALLER;
+ my $context = CALLER $level;
+
The context of the $level-th upper subroutine/eval/format. It kind of
corresponds to the context represented by "caller $level", but while
e.g. "caller 0" refers to the caller context, "CALLER 0" will refer to
{
reap \&cleanup => $cxt;
...
- } # $cxt = SCOPE(0), or HERE
+ } # $cxt = SCOPE(0) = HERE
...
- }->(); # $cxt = SCOPE(1), or UP, or SUB, or CALLER, or CALLER(0)
+ }->(); # $cxt = SCOPE(1) = UP = SUB = CALLER(0)
...
- }; # $cxt = SCOPE(2), or UP UP, or UP SUB, or EVAL, or CALLER(1)
+ }; # $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1)
...
- }->(); # $cxt = SCOPE(3), or SUB UP SUB, or SUB EVAL, or CALLER(2)
+ }->(); # $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
Where "localize", "localize_elem" and "localize_delete" act depending on
sub {
{
localize '$x' => 1 => $cxt;
- # $cxt = SCOPE(0), or HERE
+ # $cxt = SCOPE(0) = HERE
...
}
- # $cxt = SCOPE(1), or UP, or SUB, or CALLER, or CALLER(0)
+ # $cxt = SCOPE(1) = UP = SUB = CALLER(0)
...
}->();
- # $cxt = SCOPE(2), or UP UP, or UP SUB, or EVAL, or CALLER(1)
+ # $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1)
...
};
- # $cxt = SCOPE(3), or SUB UP SUB, or SUB EVAL, or CALLER(2)
+ # $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
}->();
- # $cxt = SCOPE(4), UP SUB UP SUB, or UP SUB EVAL, or UP CALLER(2), or TOP
+ # $cxt = SCOPE(4), UP SUB UP SUB = UP SUB EVAL = UP CALLER(2) = TOP
...
- Where "unwind", "want_at" and "uplevel" point to depending on the $cxt:
+ Where "unwind", "yield", "want_at", "context_info" and "uplevel" point
+ to depending on the $cxt:
sub {
eval {
sub {
{
- unwind @things => $cxt; # or uplevel { ... } $cxt;
+ unwind @things => $cxt; # or yield @things => $cxt
+ # or uplevel { ... } $cxt
...
}
...
- }->(); # $cxt = SCOPE(0 .. 1), or HERE, or UP, or SUB, or CALLER(0)
+ }->(); # $cxt = SCOPE(0) = SCOPE(1) = HERE = UP = SUB = CALLER(0)
...
- }; # $cxt = SCOPE(2), or UP UP, or UP SUB, or EVAL, or CALLER(1) (*)
+ }; # $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1) (*)
...
- }->(); # $cxt = SCOPE(3), or SUB UP SUB, or SUB EVAL, or CALLER(2)
+ }->(); # $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
# (*) Note that uplevel() will croak if you pass that scope frame,
EXPORT
The functions "reap", "localize", "localize_elem", "localize_delete",
- "unwind", "want_at" and "uplevel" are only exported on request, either
- individually or by the tags ':funcs' and ':all'.
+ "unwind", "yield", "leave", "want_at", "context_info" and "uplevel" are
+ only exported on request, either individually or by the tags ':funcs'
+ and ':all'.
The constant "SU_THREADSAFE" is also only exported on request,
individually or by the tags ':consts' and ':all'.
may help to use a perl higher than 5.8.9 or 5.10.0, as they contain some
context-related fixes.
- Calling "goto" to replace an "uplevel"'d code frame does not work when a
- custom runloop is used or when debugging flags are set with "perl -D".
- In those two cases, "uplevel" will look for a "goto &sub" statement in
+ Calling "goto" to replace an "uplevel"'d code frame does not work :
+
+ * for a "perl" older than the 5.8 series ;
+
+ * for a "DEBUGGING" "perl" run with debugging flags set (as in "perl
+ -D ...") ;
+
+ * when the runloop callback is replaced by another module.
+
+ In those three cases, "uplevel" will look for a "goto &sub" statement in
its callback and, if there is one, throw an exception before executing
the code.
version from Sub::Uplevel.
DEPENDENCIES
- XSLoader (standard since perl 5.006).
+ perl 5.6.1.
+
+ A C compiler. This module may happen to build with a C++ compiler as
+ well, but don't rely on it, as no guarantee is made in this regard.
+
+ XSLoader (core since perl 5.006).
SEE ALSO
"local" in perlfunc, "Temporary Values via local()" in perlsub.
Thanks to Shawn M. Moore for motivation.
COPYRIGHT & LICENSE
- Copyright 2008,2009,2010,2011 Vincent Pit, all rights reserved.
+ Copyright 2008,2009,2010,2011,2012,2013 Vincent Pit, all rights
+ reserved.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.