As of May 2005, Valgrind can produce its output in XML form. The
intention is to provide an easily parsed, stable format which is
suitable for GUIs to read.
Design goals
~~~~~~~~~~~~
* Produce XML output which is easily parsed
* Have a stable output format which does not change much over time, so
that investments in parser-writing by GUI developers is not lost as
new versions of Valgrind appear.
* Have an extensive output format, so that future changes to the
format do not break backwards compatibility with existing parsers of
it.
* Produce output in a form which suitable for both offline GUIs (run
all the way to the end, then examine output) and interactive GUIs
(parse XML incrementally, update display as we go).
* Put as much information as possible into the XML and let the GUIs
decide what to show the user (a.k.a provide mechanism, not policy).
* Make XML which is actually parseable by standard XML tools.
How to use
~~~~~~~~~~
Run with flag --xml=yes. That`s all. Note however several
caveats.
* At the present time only Memcheck is supported. The scheme extends
easily enough to cover Helgrind if needed.
* When XML output is selected, various other settings are made.
This is in order that the output format is more controlled.
The settings which are changed are:
- Suppression generation is disabled, as that would require user
input.
- Attaching to GDB is disabled for the same reason.
- The verbosity level is set to 1 (-v).
- Error limits are disabled. Usually if the program generates a lot
of errors, Valgrind slows down and eventually stops collecting
them. When outputting XML this is not the case.
- VEX emulation warnings are not shown.
- File descriptor leak checking is disabled. This could be
re-enabled at some future point.
- Maximum-detail leak checking is selected (--leak-check=full).
The output format
~~~~~~~~~~~~~~~~~
For the most part this should be self descriptive. It is printed in a
sort-of human-readable way for easy understanding. You may want to
read the rest of this together with the results of "valgrind --xml=yes
memcheck/tests/xml1" as an example.
All tags are balanced: a tag is always closed by . Hence
in the description that follows, mention of a tag implicitly
means there is a matching closing tag .
Symbols in CAPITALS are nonterminals in the grammar and are defined
somewhere below. The root nonterminal is TOPLEVEL.
The following nonterminals are not described further:
INT is a 64-bit signed decimal integer.
TEXT is arbitrary text.
HEX64 is a 64-bit hexadecimal number, with leading "0x".
Text strings are escaped so as to remove the <, > and & characters
which would otherwise mess up parsing. They are replaced respectively
with the standard encodings "<", ">" and "&" respectively.
Note this is not (yet) done throughout, only for function names in
.. tags-pairs.
TOPLEVEL
--------
The first line output is always this:
All remaining output is contained within the tag-pair
.
Inside that, the first entity is an indication of the protocol
version. This is provided so that existing parsers can identify XML
created by future versions of Valgrind merely by observing that the
protocol version is one they don`t understand. Hence TOPLEVEL is:
INT
PROTOCOL
Valgrind versions 3.0.0 and 3.0.1 emit protocol version 1. Versions
3.1.X and 3.2.X emit protocol version 2. 3.4.X emits protocol version
3.
PROTOCOL for version 3
----------------------
Changes in 3.4.X (tentative): (jrs, 1 March 2008)
* There may be more than one clause.
* Some errors may have two blocks, rather than just one
(resulting from merge of the DATASYMS branch)
* Some errors may have an ORIGIN component, indicating the origins of
uninitialised values. This results from the merge of the
OTRACK_BY_INSTRUMENTATION branch.
PROTOCOL for version 2
----------------------
Version 2 is identical in every way to version 1, except that the time
string in
has changed format, and is also elapsed wallclock time since process
start, and not local time or any such. In fact version 1 does not
define the format of the string so in some ways this revision is
irrelevant.
PROTOCOL for version 1
----------------------
This is the main top-level construction. Roughly speaking, it
contains a load of preamble, the errors from the run of the
program, and the result of the final leak check. Hence the
following in sequence:
* Various preamble lines which give version info for the various
components. The text in them can be anything; it is not intended
for interpretation by the GUI:
Misc version/copyright text (zero or more of)
* The PID of this process and of its parent:
INTINT
* The name of the tool being used:
TEXT
* OPTIONALLY, if --log-file-qualifier=VAR flag was given:
VAR$VAR
That is, both the name of the environment variable and its value
are given.
[update: as of v3.3.0, this is not present, as the --log-file-qualifier
option has been removed, replaced by the %q format specifier in --log-file.]
* OPTIONALLY, if --xml-user-comment=STRING was given:
STRING
STRING is not escaped in any way, so that it itself may be a piece
of XML with arbitrary tags etc.
* The program and args: first those pertaining to Valgrind itself, and
then those pertaining to the program to be run under Valgrind (the
client):
TEXTTEXT (zero or more of)
TEXTTEXT (zero or more of)
* The following, indicating that the program has now started:
RUNNING
* Zero or more of (either ERROR or ERRORCOUNTS).
* The following, indicating that the program has now finished, and
that the wrapup (leak checking) is happening.
FINISHED
* SUPPCOUNTS, indicating how many times each suppression was used.
* Zero or more ERRORs, each of which is a complaint from the
leak checker.
That's it.
ERROR
-----
This shows an error, and is the most complex nonterminal. The format
is as follows:
HEX64INTKINDTEXT
optionally: INT
optionally: INT
STACK
optionally: TEXT
optionally: STACK
optionally: ORIGIN
* Each error contains a unique, arbitrary 64-bit hex number. This is
used to refer to the error in ERRORCOUNTS nonterminals (see below).
* The tag indicates the Valgrind thread number. This value
is arbitrary but may be used to determine which threads produced
which errors (at least, the first instance of each error).
* The tag specifies one of a small number of fixed error
types (enumerated below), so that GUIs may roughly categorise
errors by type if they want.
* The tag gives a human-understandable description of the
error.
* For tags specifying a KIND of the form "Leak_*", the
optional and indicate the number of
bytes and blocks leaked by this error.
* The primary STACK for this error, indicating where it occurred.
* Some error types may have auxiliary information attached:
TEXT gives an auxiliary human-readable
description (usually of invalid addresses)
STACK gives an auxiliary stack (usually the allocation/free
point of a block). If this STACK is present then
TEXT will precede it.
KIND
----
This is a small enumeration indicating roughly the nature of an error.
The possible values are:
InvalidFree
free/delete/delete[] on an invalid pointer
MismatchedFree
free/delete/delete[] does not match allocation function
(eg doing new[] then free on the result)
InvalidRead
read of an invalid address
InvalidWrite
write of an invalid address
InvalidJump
jump to an invalid address
Overlap
args overlap other otherwise bogus in eg memcpy
InvalidMemPool
invalid mem pool specified in client request
UninitCondition
conditional jump/move depends on undefined value
UninitValue
other use of undefined value (primarily memory addresses)
SyscallParam
system call params are undefined or point to
undefined/unaddressible memory
ClientCheck
"error" resulting from a client check request
Leak_DefinitelyLost
memory leak; the referenced blocks are definitely lost
Leak_IndirectlyLost
memory leak; the referenced blocks are lost because all pointers
to them are also in leaked blocks
Leak_PossiblyLost
memory leak; only interior pointers to referenced blocks were
found
Leak_StillReachable
memory leak; pointers to un-freed blocks are still available
STACK
-----
STACK indicates locations in the program being debugged. A STACK
is one or more FRAMEs. The first is the innermost frame, the
next its caller, etc.
one or more FRAME
FRAME
-----
FRAME records a single program location:
HEX64
optionally TEXT
optionally TEXT
optionally TEXT
optionally TEXT
optionally INT
Only the field is guaranteed to be present. It indicates a
code ("instruction pointer") address.
The optional fields, if present, appear in the order stated:
* obj: gives the name of the ELF object containing the code address
* fn: gives the name of the function containing the code address
* dir: gives the source directory associated with the name specified
by . Note the current implementation often does not
put anything useful in this field.
* file: gives the name of the source file containing the code address
* line: gives the line number in the source file
ORIGIN
------
ORIGIN shows the origin of uninitialised data in errors that involve
uninitialised data. STACK shows the origin of the uninitialised
value. TEXT gives a human-understandable hint as to the meaning of
the information in STACK.
TEXT
STACK
ERRORCOUNTS
-----------
This specifies, for each error that has been so far presented,
the number of occurrences of that error.
zero or more of
INTHEX64
Each gives the current error count for the error with
unique tag . The counts do not have to give a count for each
error so far presented - partial information is allowable.
As at Valgrind rev 3793, error counts are only emitted at program
termination. However, it is perfectly acceptable to periodically emit
error counts as the program is running. Doing so would facilitate a
GUI to dynamically update its error-count display as the program runs.
SUPPCOUNTS
----------
A SUPPCOUNTS block appears exactly once, after the program terminates.
It specifies the number of times each error-suppression was used.
Suppressions not mentioned were used zero times.
zero or more of
INTTEXT
The is as specified in the suppression name fields in .supp
files.